Waste-free chemistry of diazonium salts and benign separation of coupling products in solid salt reactions

Gas-solid and solid-solid techniques allow for waste-free and quantitative syntheses in the chemistry of diazonium salts. Five techniques for diazotations with the reactive gases NO(2), NO and NOCl are studied. Two types are mechanistically investigated with atomic force microscopy (AFM) and are interpreted on the basis of known crystal packings. The same principles apply to the cascade reactions that had been derived from one-step reactions. Solid diazonium salts couple quantitatively with solid diphenylamine and anilines to give the triazenes. Azo couplings are achieved with quantitative yields by cautious co-grinding of solid diazonium salts with beta-naphthol and C-H acidic heterocycles, such as barbituric acids or pyrazolinones. Solid diazonium salts may be more easily applied in a stoichiometric ratio for couplings in solution. Co-grinding of solid diazonium salts with KI gives quantitative yields of various solid aryl iodides. The unavoidable coupling products in salt reactions are completely separated from the insoluble products in a highly benign manner. The solid-state reactions compare favourably with similar solution reactions that produce much waste. The structures of the products are elucidated with IR and NMR spectroscopy and mass spectrometry, while the tautomeric properties of the compounds are studied with density functional calculations at the B3LYP/6-31G* and BLYP/6-31G** levels.     

Alkene cis-dihydroxylation by [(Me3tacn)(CF3CO2)RuVI O2)]ClO4(Me(3)tacn = 1,4,7-Trimethyl-1,4,7-triazacyclononane): structural characterization of [3 + 2] cycloadducts and kinetic studies

cis-Dioxoruthenium(VI) complex [(Me(3)tacn)(CF(3)CO(2))Ru(VI)O(2)]ClO(4) (1, Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane) reacted with alkenes in aqueous tert-butyl alcohol to afford cis-1,2-diols in excellent yields under ambient conditions. When the reactions of 1 with alkenes were conducted in acetonitrile, oxidative C=C cleavage reaction prevailed giving carbonyl products in >90% yields without any cis-diol formation. The alkene cis-dihydroxylation and C=C cleavage reactions proceed via the formation of a [3 + 2] cycloadduct between 1 and alkenes, analogous to the related reactions with alkynes [Che et al. J. Am. Chem. Soc. 2000, 122, 11380]. With cyclooctene and trans-beta-methylstyrene as substrates, the Ru(III) cycloadducts (4a) and (4b) [formula; see text] were isolated and structurally characterized by X-ray crystal analyses. The kinetics of the reactions of 1 with a series of p-substituted styrenes has been studied in acetonitrile by stopped-flow spectrophotometry. The second-order rate constants varied by 14-fold despite an overall span of 1.3 V for the one-electron oxidation potentials of alkenes. Secondary kinetic isotope effect (KIE) was observed for the oxidation of beta-d(2)-styrene (k(H)/k(D) = 0.83 +/- 0.04) and alpha-deuteriostyrene (k(H)/k(D) = 0.96 +/- 0.03), which, together with the stereoselectivity of cis-alkene oxidation by 1, is in favor of a concerted mechanism.     

Arylgold(I) complexes from base-assisted transmetalation: structures, NMR properties, and density-functional theory calculations

The synthesis of gold(I) complexes of the type LAuR (L = PCy(3), IPr; R = aryl; IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) starting from LAuX (X = Br, OAc) and boronic acids in the presence of Cs(2)CO(3) has been investigated. The reactions proceed smoothly in good to excellent yields over the course of 24-48 h in isopropyl alcohol at 50-55 °C. The aryl groups include a variety of functionalities and steric bulk, and in two cases, are heterocyclic. All of the products have been characterized by multinuclear NMR spectroscopy and elemental analysis and most by X-ray crystallography. This work affirms that, almost without exception, base-assisted auration is a useful and reliable way to form gold-carbon bonds.     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

One-step redox route to N-heterocyclic phosphenium ions

One-step reactions of the appropriate N-alkyl-, N-cycloalkyl-, and N-aryl-substituted alpha-diimines with PI3 afforded >80% yields of the triiodide salts of the following N-heterocyclic phosphenium ions, [(R1NC(R2)C(R2)NR1)P]+: 3 (R1 = t-Bu; R2 = H); 4 (R1 = 2,6-i-Pr2C6H3; R2 = H), 5 (R1 = Mes; R2 = H), 6 (R1 = 2,6-i-Pr2C6H3; R2 = H), and 7 (R1 = cyclohexyl; R2 = H). Treatment of 3 and 6 with NaB(C6H5)4 resulted in virtually quantitative yields of the corresponding [B(C6H5)4]- salts 8 and 9, respectively. The X-ray crystal structures of 3 and 5-9 were determined.     

Structure elucidation of thermal degradation products of amlodipine

Thermal degradation of amlodipine base causes intramolecular reactions affording three cyclic products, referred to as AMLDEG-I, AMLDEG-II, and AMLDEG-III, respectively. AMLDEG-I is a cyclized product formed by intramolecular elimination of ammonia from amlodipine. AMLDEG-II is a positional isomer of AMLDEG-I. AMLDEG-III is also intramolecular cyclisation product. The three degradation products were isolated by column chromatography and characterized by FT-IR and 1H and 13C NMR spectroscopy data. The AMLDEG-III was crystallized and its structure was solved by single crystal X-ray diffraction (SXRD).     

Highly efficient hydrophosphonylation of aldehydes and unactivated ketones catalyzed by methylene-linked pyrrolyl rare earth metal amido complexes

A series of rare earth metal amido complexes bearing methylene-linked pyrrolyl-amido ligands were prepared through silylamine elimination reactions and displayed high catalytic activities in hydrophosphonylations of aldehydes and unactivated ketones under solvent-free conditions for liquid substrates. Treatment of [(Me(3)Si)(2)N](3)Ln(μ-Cl)Li(THF)(3) with 2-(2,6-Me(2)C(6)H(3)NHCH(2))C(4)H(3)NH (1, 1 equiv) in toluene afforded the corresponding trivalent rare earth metal amides of formula {(μ-η(5):η(1)):η(1)-2-[(2,6-Me(2)C(6)H(3))NCH(2)](C(4)H(3)N)LnN(SiMe(3))(2)}(2) [Ln=Y (2), Nd (3), Sm (4), Dy (5), Yb (6)] in moderate to good yields. All compounds were fully characterized by spectroscopic methods and elemental analyses. The yttrium complex was also characterized by (1)H NMR spectroscopic analyses. The structures of complexes 2, 3, 4, and 6 were determined by single-crystal X-ray analyses. Study of the catalytic activities of the complexes showed that these rare earth metal amido complexes were excellent catalysts for hydrophosphonylations of aldehydes and unactivated ketones. The catalyzed reactions between diethyl phosphite and aldehydes in the presence of the rare earth metal amido complexes (0.1 mol%) afforded the products in high yields (up to 99%) at room temperature in short times of 5 to 10 min. Furthermore, the catalytic addition of diethyl phosphite to unactivated ketones also afforded the products in high yields of up to 99% with employment of low loadings (0.1 to 0.5 mol%) of the rare earth metal amido complexes at room temperature in short times of 20 min. The system works well for a wide range of unactivated aliphatic, aromatic or heteroaromatic ketones, especially for substituted benzophenones, giving the corresponding α-hydroxy diaryl phosphonates in moderate to high yields.     

Generation of 1-aryl-3-methoxycarbonylnitrilimines and their reaction with halogen-containing unsaturated compounds

Thermal decomposition of 1-(4-methoxyphenyl)- and 1-(4-fluorophenyl)hepta(methoxycarbonyl)-3a,7a-dihydroindazoles at 135 °C in the presence of allyl or propargyl halides leads to the elimination of hexamethyl benzenehexacarboxylate and the formation of the corresponding pyrazolines or pyrazoles as the products of 1,3-dipolar cycloaddition of 1-aryl-3-methoxycarbonylnitrilimines to the multiple bonds of the substrates used. In the case of vinyl halides, the products of the target reactions are either obtained in low yields or nonexistent, with a side conversions taking place instead. Thus, for example, in the case of 1,1-dichloro-4-methylpenta-1,3-diene, besides hexamethyl benzenehexacarboxylate, 3,5,5-trichloro-2-methylpent-4-en-2-ol and arylchlorohydrazones MeO₂CC(Cl)=N-NHAr were unexpectedly isolated as the main products, as well.     

Studies of the gas phase reactions of linalool, 6-methyl-5-hepten-2-ol and 3-methyl-1-penten-3-ol with O3 and OH radicals

The reactions of three unsaturated alcohols (linalool, 6-methyl-5-hepten-2-ol, and 3-methyl-1-penten-3-ol) with ozone and OH radicals have been studied using simulation chambers at T ～ 296 K and P ～ 760 Torr. The rate coefficient values (in cm(3) molecule(-1) s(-1)) determined for the three compounds are linalool, k(O3) = (4.1 ± 1.0) × 10(-16) and k(OH) = (1.7 ± 0.3) × 10(-10); 6-methyl-5-hepten-2-ol, k(O3) = (3.8 ± 1.2) × 10(-16) and k(OH) = (1.0 ± 0.3) × 10(-10); and 3-methyl-1-penten-3-ol, k(O3) = (5.2 ± 0.6) × 10(-18) and k(OH) = (6.2 ± 1.8) × 10(-11). From the kinetic data it is estimated that, for the reaction of O(3) with linalool, attack at the R-CH═C(CH(3))(2) group represents around (93 ± 52)% (k(6-methyl-5-hepten-2-ol)/k(linalool)) of the overall reaction, with reaction at the R-CH═CH(2) group accounting for about (1.3 ± 0.5)% (k(3-methyl-1-penten-3-ol)/k(linalool)). In a similar manner it has been calculated that for the reaction of OH radicals with linalool, attack of the OH radical at the R-CH═C(CH(3))(2) group represents around (59 ± 18)% (k(6-methyl-5-hepten-2-ol)/k(linalool)) of the total reaction, while addition of OH to the R-CH═CH(2) group is estimated to be around (36 ± 6)% (k(3-methyl-1-penten-3-ol)/k(linalool)). Analysis of the products from the reaction of O(3) with linalool confirmed that addition to the R-CH═C(CH(3))(2) group is the predominant reaction pathway. The presence of formaldehyde and hydroxyacetone in the reaction products together with compelling evidence for the generation of OH radicals in the system indicates that the hydroperoxide channel is important in the loss of the biradical [(CH(3))(2)COO]* formed in the reaction of O(3) with linalool. Studies on the reactions of O(3) with the unsaturated alcohols showed that the yields of secondary organic aerosols (SOAs) are higher in the absence of OH scavengers compared to the yields in their presence. However, even under low-NO(X) concentrations, the reactions of OH radicals with 3-methyl-1-penten-3-ol and 6-methyl-5-hepten-2-ol will make only a minor contribution to SOA formation under atmospheric conditions. Relatively high yields of SOAs were observed in the reactions of OH with linalool, although the initial concentrations of reactants were quite high. The importance of linalool in the formation of SOAs in the atmosphere requires further investigation. The impact following releases of these unsaturated alcohols into the atmosphere are discussed.     

Reversible oxidative addition and reductive elimination of fluorinated disulfides at gold(I) thiolate complexes: a new ligand exchange mechanism

Reaction of HAuCl4 x 3 H2O with excess HSAr (Ar = C6F5 or C6F4H) in ethanol, followed by addition of [Et4N]Cl, produced [Et4N][Au(SAr)4] (Ar = C6F5 (1a) or C6F4H (1b)) as red crystalline solids in high yield. These complexes are rare examples of homoleptic gold(III) thiolate complexes. The crystal structures 1 show square planar geometry at the gold center with elongated Au-S bonds. Both complexes undergo reversible reductive elimination/oxidative addition processes in solution via thermal and photochemical pathways. Equilibrium constant and photostationary state measurements indicate that the relative importance of the two pathways depends on the nature of the aromatic groups. The metal-containing reductive elimination products, [Et4N][Au(SAr)2] (Ar = C6F5 (2a) or C6F4H (2b)), were confirmed by both independent synthesis and crystallographic characterization. Cross-reactions between either 1 or 2 and various disulfides led to ligand exchange via an addition-elimination process, a previously unknown reaction pathway for ligand exchange at gold(I) centers.     

Coupling vs surface-etching reactions of alkyl halides on GaAs(100). 2. CH2I2 reactions

Surface reactions of CH2I2 on gallium-rich GaAs(100)-(4 x 1), studied by temperature programmed desorption and X-ray photoelectron spectroscopy (XPS), show CH2I2 adsorbs dissociatively at liquid nitrogen temperatures to form surface chemisorbed CH2(ads) and I(ads) species. Controlled hydrogenation of a fraction of the CH2(ads) species in the chemisorbed layer by the background hydrogen radicals results in a surface layer comprising both CH3(ads) and CH2(ads) species. This hydrogenation step initiates a plethora of further surface reactions involving these two species and I(ads). Thermal activation leads to three sequential methylene insertions (CH2(ads)) into the CH3-surface bond to form three higher alkyl (ethyl (C2), propyl (C3), and butyl (C4)) species, which undergo beta-hydride elimination to evolve the respective higher alkene (ethene, propene, and butene). In competition with beta-hydride elimination, reductive elimination of the ethyl and propyl species with I(ads) occurs to liberate the respective alkyl iodide. Beta-hydride elimination in the alkyls, in the temperature range 420-520 K, is the more dominant pathway, and it is also the rate-limiting step for further chain propagation. The evolution of the alkyl iodides represents the only pathway for the removal of surface iodines in this study and is different from previous investigations where gallium and arsenic iodide etch products (GaI(x), AsI(x) (x = 1-3)) formed instead. The desorption of methane and methyl iodide, formed from surface CH3(ads) species at high temperatures by the reaction between surface methylenes and hydrogens eliminated from the surface C2-C4 alkyls, terminates the chain propagation. We discuss the reaction mechanisms by which the observed reaction products form and postulate reasons for the reaction pathways adopted by the surface species.     

Regiocontrolled halohydroxylations of bicyclic vinylidenecyclopropanes: a versatile strategy for the construction of diverse highly functionalized carbocyclic scaffolds

Highly regioselective halohydroxylations of bicyclic vinylidenecyclopropanes that lead to four types of products 2, 3, 4, and 6 were developed. The halohydroxylation reaction occurs at room temperature to give rise to ring-keeping products vinylbicyclo[(n+2).1.0]alkanols 2 in 55-90% yields with excellent regio- and diastereoselectivity; the reaction of bicyclic vinylidenecyclopropanes with 2.0 equiv of N-bromosuccinimide (NBS) at 100 °C affords alkylidenebicyclo[(n+2).2.0]alkanones 3 in 48-75% yields by means of further proximal cleavage of the cyclopropane ring. The structures of both types of compounds 2 and 3 have been elucidated by X-ray crystal diffraction. An interesting sequential reaction that consists of a couple electrophilic addition and elimination reactions was developed when the reaction of bicyclic vinylidenecyclopropanes with N-halosuccinimide (NXS; 3.0 equiv) was performed under the specified conditions to furnish a variety of divinyl ketones 4 by means of proximal cleavage of the cyclopropane ring. In addition, vinylidenecyclopropanes that bore one aryl group at the cyclopropyl ring reacted with NBS or I(2) at room temperature, thereby producing the corresponding divinyl ketones 4 in moderate to good yields with excellent E selectivity. Unexpectedly, 2-vinylic cyclohex-2-enols 6 were generated through a very different distal C-C bond cleavage of the cyclopropane due to the significant ring-size effect. Possible mechanisms are proposed on the basis of the obtained intermediates.     

Nickel(II) complexes containing bidentate amido phosphine ligands derived from alpha-iminophosphorus ylides: synthesis and structural characterization

The reactions of prop-2-ynyltriphenylphosphonium bromide with a series of primary aromatic or aliphatic amines in refluxing acetonitrile generated the corresponding 2-hydrocarbylaminoprop-1-enyltriphenylphosphonium bromide [RNHC(Me)=CHPPh(3)]+Br- (R = 2,6-C(6)H(3)iPr(2) (1a), 2,6-C(6)H(3)Me(2) (1b), Ph (1c), t-Bu (1d)) as crystalline solids. Deprotonation of 1a-d with NaH in THF at -35 degrees C afforded the alpha-iminophosphorus ylides RN=C(Me)CH=PPh(3) (2a-d) in high yield. Spectroscopic and crystallographic data of 2 suggest a strong intramolecular interaction between the imino nitrogen and the phosphorus atom. In contrast to N-arylated 2a-c, the N-tert-butyl-derived 2d is extremely moisture-sensitive. Hydrolysis of 2d led to elimination of benzene and generated concomitantly the phosphine oxide 3d that contains an ene-amine functionality. The reactions of 2a-c with Ni(COD)(2) in the presence of an excess amount of pyridine in toluene produced the divalent nickel complexes of the type [kappa(2)-RNC(Me)=CHPPh(2)]Ni(Ph)(Py) (4a-c). The solution and solid-state structures of these new compounds are presented.     

From lithium bis(trimethylsilyl)amide with cyanoamine into triazine compounds: synthesis and structures of lithium 6-((trimethylsilyl)amido)-2,4-bis(dimethylamino)[1,3,5]triazines and their manganese and cobalt complexes

Addition reactions of lithium bis(trimethylsilyl)amide with dimethylcyanamide lead to novel lithium salts of 6-((trimethylsilyl)amido)-2,4-bis(dimethylamino)[1,3,5]triazines [LLi(D)](2) (L = NC(NMe(2))NC(NMe(2))NC(NSiMe(3)); D = Me(2)NCN (1), Et(2)O (2)) and to the Mn and Co complexes [LL'M] (L' = N{N(SiMe(3))C(NMe(2))}(2); M = Mn (3), Co (4)); the structures of crystalline 1, 3, and 4 are reported. Their formation involves trimethylsilyl shifts, ring formation, and unusual Me(2)NSiMe(3) elimination.     

Enantio- and diastereoselective additions to aldehydes using the bifunctional reagent 2-(chloromethyl)-3-(tributylstannyl)propene: application to a synthesis of the C16-C27 segment of bryostatin 1

[reaction: see text] Reactions of the bifunctional allylstannane 2-(chloromethyl)-3-(tributylstannyl)propene with aldehydes have been examined. These generally occur in high yields using Lewis acid promoters and the products can be isolated and purified without incident. Good yields and high enantioselectivities are also realized in catalytic asymmetric allylations (CAA reactions) using the previously described BITIP catalyst system. Protection of the free hydroxyl can be accomplished without cyclization to the derived tetrahydrofuran, although this transformation is also facile. The utility of the incorporated allyl chloride functionality allows for the obvious use of such products in reactions with nucleophiles. Use of these products in a less obvious connective strategy is demonstrated in the synthesis of the C12-C27 segment of bryostatin 1 where a connective, or "lynchpin", double-allylation process was employed. The beta-hydroxy allyl chloride obtained from an initial chelation-controlled allylation of aldehyde 16 was converted to allylstannane 19 and applied in a second allylation reaction, thus allowing for a highly convergent synthesis of the bryostatin C ring backbone in a stereoselective fashion.     

Atmospheric chemistry of t-CF3CH=CHCl: products and mechanisms of the gas-phase reactions with chlorine atoms and hydroxyl radicals

FTIR-smog chamber techniques were used to study the products and mechanisms of the Cl atom and OH radical initiated oxidation of trans-3,3,3-trifluoro-1-chloro-propene, t-CF(3)CH=CHCl, in 700 Torr of air or N(2)/O(2) diluent at 296 ± 2 K. The reactions of Cl atoms and OH radicals with t-CF(3)CH=CHCl occur via addition to the >C=C< double bond; chlorine atoms add 15 ± 5% at the terminal carbon and 85 ± 5% at the central carbon, OH radicals add approximately 40% at the terminal carbon and 60% at the central carbon. The major products in the Cl atom initiated oxidation of t-CF(3)CH=CHCl were CF(3)CHClCHO and CF(3)C(O)CHCl(2), minor products were CF(3)CHO, HCOCl and CF(3)COCl. The yields of CF(3)C(O)CHCl(2), CF(3)CHClCOCl and CF(3)COCl increased at the expense of CF(3)CHO, HCOCl and CF(3)CHClCHO as the O(2) partial pressure was increased over the range 10-700 Torr. Chemical activation plays a significant role in the fate of CF(3)CH(O)CHCl(2) and CF(3)CClHCHClO radicals. In addition to reaction with O(2) to yield CF(3)COCl and HO(2) the major competing fate of CF(3)CHClO is Cl elimination to give CF(3)CHO (not C-C bond scission as previously thought). As part of this study k(Cl + CF(3)C(O)CHCl(2)) = (2.3 ± 0.3) × 10(-14) and k(Cl + CF(3)CHClCHO) = (7.5 ± 2.0) × 10(-12) cm(3) molecule(-1) s(-1) were determined using relative rate techniques. Reaction with OH radicals is the major atmospheric sink for t-CF(3)CH=CHCl. Chlorine atom elimination giving the enol CF(3)CH=CHOH appears to be the sole atmospheric fate of the CF(3)CHCHClOH radicals. The yield of CF(3)COOH in the atmospheric oxidation of t-CF(3)CH=CHCl will be negligible (<2%). The results are discussed with respect to the atmospheric chemistry and environmental impact of t-CF(3)CH=CHCl.     

Formation of silicon centered spirocyclic compounds: reaction of N-heterocyclic stable silylene with benzoylpyridine, diisopropyl azodicarboxylate, and 1,2-diphenylhydrazine

Three silicon centered spirocyclic compounds 1-3, possessing silicon fused six- and five-membered rings have been prepared by the reaction of NHSi (L) [L = CH{(C=CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)}Si] with benzoylpyridine, diisopropyl azodicarboxylate, and 1,2-diphenylhydrazine, respectively, in a 1:1 ratio. The three spirocyclic compounds (1- 3) were obtained by three different pathways. The reaction of L with benzoylpyridine leads to the activation of the pyridine ring, and dearomatization occurred. Treatment of diisopropyl azodicarboxylate with L favors a [1 + 4]- rather than a [1 + 2]-cycloaddition product, and the azo compound was converted to hydrazone derivative. Finally the reaction of 1,2-diphenylhydrazine and L results in the elimination of hydrogen by activating one of the C-H bonds present in the phenyl ring. All three complexes 1- 3 were characterized by single crystal X-ray structural analysis, NMR spectroscopy, EI-MS spectrometry, and elemental analysis. In addition the optimized structures of probable products and possible intermediates were investigated using density functional theory (DFT) calculations.     

1,3-Dioxanone Derivatives from β-Hydroxy-carboxylic Acids and Pivalaldehyde. Versatile Building Blocks for Syntheses of Enantiomerically Pure Compounds. A Chiral Acetoacetic Acid Derivative Preliminary Communication

(R)-3-Hydroxybutyric acid (from the biopolymer PHB) and pivalaldehyde give the crystalline cis - or (R,R)-2-(tert-butyl)-6-methyl-1,3-dioxan-4-one ( 1a ), the enolate of which is stable at low temperature in THF solution and can be alkylated diastereoselectively ( →3, 4, 5 , and 7 ). Phenylselenation and subsequent elimination give an enantiomerically pure enol acetal 10 of aceto-acetic acid. Some reactions of 10 have been carried out, such as Michael addition (→ 11 ), alkylation on the CH₃ substituent (→ 13 ), hydrogenation of the C?C bond (→ 1a ) and photochemical cycloaddition (→ 16 ). The overall reactions are substitutions on the one stereogenic center of the starting β-hydroxy acid without racemization and without using a chiral auxiliary.     

Reduction reactions of a 1,3,5-triphosphabenzene

The reactions of the triphosphabenzene, 1,3,5-P3C3But3, with LiMH4, M = Al or Ga, lead to the triphosphabicyclo[3.1.0]hexanediyl metallate complexes, [[[Li(OEt2)][MH2(P3C3But3H2)]]2], which give exo- and endo-isomers of a triphosphabicyclo[3.1.0]hexane, P3C3But3H4 upon quenching. The related reaction of [AlH3(NMe3)] with 1,3,5-P3C3But3 affords three identifiable products, viz. a triphosphabicyclo[3.1.0]hexenyl complex, [AlH2(P3C3But3H)(NMe3)], and two triphosphabicyclo[3.1.0]hexanediyl complexes, [AlH(P3C3But3H2)(NMe3)] and [Al2H4(P3C3But3H2)(NMe3)]. In contrast, the reactions of 1,3,5-P3C3But3 with either [GaH3(quin)], quin = quinuclidine, or Me3SnH lead only to the triphosphabicyclo[3.1.0]hexenyl complexes, [GaH2(P3C3But3H)(quin)] and [Me3Sn(P3C3But3H)]. Quenching of the former affords a triphosphabicyclo[3.1.0]hexene, P3C3But3H2, while quenching the latter gives its triphosphacyclohexa-1,4-diene valence isomer. Treatment of 1,3,5-P3C3But3 with "GaI" yields a GaI3 complex of the triphosphahexa-1,4-diene, [GaI3(P3C3But3H2)], whilst treatment with the anionic Ga(I) heterocycle, [:Ga[N(Ar)C(H)]2]-, Ar = C6H3Pri2-2,6, affords the known diphospholyl anion, [1,3-P2C3But3]- via a P-abstraction from the triphosphabenzene. Finally, reaction of the 1,3,5-triphosphacyclohexane, [P(OEt)C(H)(But)]3, with thionyl chloride yields the unusual lambda5, lambda5, lambda5-1,3,5-triphosphacyclohexane, [P(O)(Cl)C(H)(But)]2[P(OEt)(S)C(H)(But)]. Suggestions as to the mechanisms of a number of these reduction reactions are made and the crystal structures of seven compounds are reported.     

Adducts of thianthrene- and phenoxathiin cation radical salts with symmetrical alkynes. Structure and formation of cumulenes on alumina leading to alpha-diketones, alpha-hydroxyalkynes, and alpha-acetamidoalkynes

[reaction: see text] Thianthrene cation radical tetrafluoroborate (Th*+ BF4-) added to 2-butyne, 3-hexyne, 4-octyne, and 5-decyne in MeCN to form trans bisadducts R(Th+)C=C(Th+)R, where R = Me, Et, Pr, Bu (7a-d). Phenoxathiin cation radical tetrafluoroborate (PO*+ BF4-) added similarly to the last three alkynes to form adducts R(PO+)C=C(PO+)R, 8b-d. Cyclic monoadducts were not found. The trans structures of 7 and 8 were deduced with X-ray crystallography (7c) and NMR spectroscopy. When solutions of adducts in CHCl3 and MeCN were deposited on activated alumina, elimination of thianthrene (Th) and phenoxathiin (PO) occurred almost quantitatively. Detailed studies with (7b-d) indicated that a cumulene (15) was formed by the elimination of Th and that 15 was subsequently converted into small amounts of other products. In CHCl3, these products were the respective alkyne, thianthrene 5-oxide, an alpha-diketone (11), an alpha-hydroxyalkyne (12), and hydrogen. The same products were formed in MeCN along with an alpha-acetamidoalkyne (13). The formation of 15 and products derived from it is explained and was confirmed by preparation and reactions of 2,3,4-hexatriene.