Water-soluble molecular capsules: self-assembly and binding properties

The self-assembly and characterization of water-soluble calix[4]arene-based molecular capsules (12) is reported. The assemblies are the result of ionic interactions between negatively charged calix[4]arenes 1 a and 1 b, functionalized at the upper rim with amino acid moieties, and a positively charged tetraamidiniumcalix[4]arene 2. The formation of the molecular capsules is studied by (1)H NMR spectroscopy, ESI mass spectrometry (ESI-MS), and isothermal titration calorimetry (ITC). A molecular docking protocol was used to identify potential guest molecules for the self-assembled capsule 1 a2. Experimental guest encapsulation studies indicate that capsule 1 a2 is an effective host for both charged (N-methylquinuclidinium cation) and neutral molecules (6-amino-2-methylquinoline) in water.     

Proparacaine complexation with β‐cyclodextrin and p‐sulfonic acid calix[6]arene,as evaluated by varied 1H‐NMR approaches

This study focused on the use of NMR techniques as a tool for the investigation of complex formation between proparacaine and cyclodextrins (CDs) or p‐sulfonic acid calix[6]arene. The pH dependence of the complexation of proparacaine with β‐CD and p‐sulfonic acid calix[6]arene was studied and binding constants were determined by ¹H NMR spectroscopy [diffusion‐ordered spectroscopy (DOSY)] for the charged and uncharged forms of the local anesthetic in β‐CD and p‐sulfonic acid calix[6]arene. The stoichiometries of the complexes was determined and rotating frame Overhauser enhancement spectroscopy (ROESY) 1D experiments revealed details of the molecular insertion of proparacaine into the β‐CD and p‐sulfonic acid calix[6]arene cavities. The results unambiguously demonstrate that pH is an important factor for the development of supramolecular architectures based on β‐CD and p‐sulfonic acid calix[6]arene as the host molecules. Such host–guest complexes were investigated in view of their potential use as new therapeutic formulations, designed to increase the bioavailability and/or to decrease the systemic toxicity of proparacaine in anesthesia procedures. Copyright © 2009 John Wiley & Sons, Ltd.     

Dimeric Capsules Formed by Tetra‐CMPO Derivatives of (Thia)Calix[4]arenes

Thiacalix[4]arene 2 , calix[4]arene 3 a and its tetraether fixed in the cone conformation 3 b form homo‐ and heterodimeric capsules in apolar solvents, which are held together by a seam of NH???O=P hydrogen bonds between carbamoylmethyl phospine oxide functions attached to their wide rim. Their internal volume of ～370 ų requires the inclusion of a suitable guest. Although neutral molecules such as adamantane (derivatives) or tetraethylammonium cations form kinetically stable complexes (¹H‐ and ³¹P‐time scale), the included solvent is rapidly exchanged. The internal mobility of the included tetraethylammonium cation is distinctly higher (ΔG=42.5 and 49.7 kJ mol^?1 for 3 a and 3 b ) than that for similar capsules of tetraurea calix[4]arenes 1 . Mixtures of 1 with 2 , 3 a , or 3 b contain only the two homodimers but the heterodimerization occurs with the tetraloop tetraurea 6 , which cannot form homodimers. Two dimers with cationic guests ( 2? (C₅H₅)₂Co⁺ ?2 and 3 a? Et₃NH⁺ ? H₂O ?3 a ) were confirmed by single‐crystal X‐ray analysis.     

Calixarene‐centered amphiphilic A2B2 miktoarm star copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol): Synthesis and self‐assembly behaviors in water

Novel calixarene‐centered amphiphilic A₂B₂ miktoarm star copolymers composed of two PCL arms and two PEG arms with calix[4]arene as core moiety were synthesized by the combination of CROP and “click” chemistry. First, a heterotetrafunctional calix[4]arene derivative with two hydroxyl groups and two alkyne groups was designed as a macroinitiator to prepare calixarene‐centered PCL homopolymers (C4‐PCL) by CROP in the presence of Sn(Oct)₂ as catalyst at 110 °C. Next, azide‐terminated PEG (A‐PEG) was synthesized by tandem treating methoxy poly(ethylene glycol)s (mPEG) with 4‐chlorobutyryl chloride and NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction between C4‐PCL and A‐PEG led to A₂B₂ miktoarm star copolymer [C4S(PCL)₂‐(PEG)₂]. ¹H NMR, FT‐IR, and SEC analyses confirmed the well‐defined miktoarm star architecture. These amphiphilic miktoarm star copolymers could self‐assemble into multimorphological aggregates in water. The calix[4]arene moieties with a cavity <1 nm on the hydrophilic/hydrophobic interface of these aggregates may provide potential opportunities to entrap guest molecules for special applications in supermolecular science. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Exploring the structural landscape of 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole: high‐Z′ packing polymorphism and cocrystallization with calix[4]tube

We report here for the first time a cocrystal of the so‐called neutral calix[4]tube, which is two tail‐to‐tail‐arranged and partially deprotonated tetrakis(carboxymethoxy)calix[4]arenes, including three sodium ions, with 2‐(thiophen‐2‐yl)‐1,3‐benzothiazole, namely trisodium bis(carboxymethoxy)bis(carboxylatomethoxy)calix[4]arene tris(carboxymethoxy)(carboxylatomethoxy)calix[4]arene–2‐(thiophen‐2‐yl)‐1,3‐benzothiazole–dimethyl sulfoxide–water (1/1/2/2), 3Na⁺·C₃₆H₃₀O₁₂^2?·C₃₆H₃₁O₁₂^?·C₁₁H₇NS₂·2C₂H₆OS·2H₂O, which provides a new approach into the host–guest chemistry of inclusion complexes. Three packing polymorphs of the same benzothiazole with high Z′ (one with Z′ = 8 and two with Z′ = 4) were also discovered in the course of our desired cocrystallization. The inspection of these polymorphs and a previously known polymorph with Z′ = 2 revealed that Z′ increases as the strength of intermolecular contacts decreases. Also, these results expand the frontier of invoking calixarenes as a host for nonsolvent small molecules, besides providing knowledge on the rare formation of high‐Z′ packing polymorphs of simple molecules, such as the target benzothiazole.     

QCM 表面自组装胱氨酸1，3－桥连杯[4]芳烃膜用于识别气相丁胺

Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.     

pH‐Controlled Molecular Switches and the Substrate‐Directed Self‐Assembly of Molecular Capsules with a Calix[4]pyrrole Derivative

10α,20α‐Bis(4‐nitrophenyl)calix[4]pyrrole ( 1 ) forms 1:1 complexes with anions of selected aromatic hydroxy acids in which the host orientation within the guest is controlled by a change in the pH value. Some bis‐anionic guests, including those obtained from 4‐hydroxybenzoic acid, 1,4‐ and 1,3‐benzenedicarboxylic acids, induce the self‐assembly of molecular capsules involving two molecules of the receptor. ¹H NMR data and solid‐state structures of the 1:1 complex of 1 with p‐C₆H₄(COOH)(COO^?)⁺NMe₄ and the 2:1 capsule [( 1 )₂m‐C₆H₄(COO^?)₂(⁺NMe₄)₂] provide structural details in solution and in the solid state.     

单氧代-二硒烷基-1, w-二氧取代杯[4]衍生物的合成,结构及萃取性能研究

Novel macrocyclic monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a were synthesized by the reaction of calix[4]arene dibromides 1-5 with the disodium salt of bis（2-selenylethyl）ether in the yields between 28% and 64%. Their structures were characterized by proton and carbon NMR spectra. X-Ray structure analysis of la further confirmed the cone conformation of compounds 1a-5a. An interesting host-guest complex of la with dichloromethane via CH/π and C1/π interactions was elucidated. Extraction experiments showed that these novel monooxa-diselkylene-1,ω-dioxy substituted calix[4]arene derivatives 1a-5a had strong extraction ability towards mercury ion. The interaction of Hg^2＋with the calix ligand has also been investigated by 1^H NMR titration.     

Diphosphine Capsules for Transition‐Metal Encapsulation

Self‐assembly and characterization of novel heterodimeric diphosphine capsules formed by multiple ionic interactions and composed of one tetracationic diphosphine ligand and one complementary tetraanionic calix[4]arene are described. Encapsulation of a palladium atom within a diphosphine capsule is achieved successfully by using the metal complex of the tetracationic diphosphine ligand for the assembly process. In this templated approach to metal encapsulation, the transition‐metal complex is an integrated part of the capsule with the transition metal located inside the capsule and is not involved in the assembly process. We present two approaches for capsule assembly by mixing solutions of the precharged building blocks in methanol and mixing solutions of the neutral building blocks in methanol. The scope of the diphosphine capsules and the metallodiphosphine capsules is easily extended by applying tetracationic diphosphine ligands with different backbones (ethylene, diphenyl ether, and xanthene) and cationic binding motifs (p‐C₆H₄‐CH₂‐ammonium, m‐C₆H₄‐ammonium, and m‐C₆H₄‐guanidinium). These tetracationic building blocks with different flexibilities and shapes readily associate into capsules with the proper capsular structure, as is indicated by ¹H NMR spectroscopy, 1D NOESY, ESI‐MS, and modeling studies.     

Bis(metallo) Capsules Based on Two Ionic Diphosphines

Self‐assembly and characterization of heterodimeric diphosphine capsules formed by multiple ionic interactions are described. The first type of capsules is composed of one novel tetrasulfonato‐xantphos ligand and one complementary tetraammonium calix[4]arene. Encapsulation of a transition metal is achieved by self‐assembly of a rhodium complex containing the tetraanionic diphosphine ligand and a tetracationic calix[4]arene. The second type of capsules is composed of two oppositely charged diphosphine ligands: one tetrasulfonato‐xantphos and one tetraammonium‐diphosphine (of the xantphos‐, DPEphos‐, and 1,2‐bis(diphenylphosphino)ethane (dppe)‐type). Bis(metallo) capsules, that is, simultaneous encapsulation of two different transition metals, are created by self‐assembly of a palladium or platinum complex containing a tetracationic ligand and a rhodium complex containing a tetraanionic ligand. Diphosphine ligands with different flexibilities and shapes assemble into metallocapsules with a proper capsular structure, as is indicated by ¹H NMR and 1D‐NOESY spectroscopy, ESIMS, and modeling studies.     

Guest⊂Guest⊂Host Multicomponent Molecular Crystals: Entrapment of Guest⊂Guest in Honeycomb Networks Formed by Self‐Assembly of 1,3,5‐Tri(4‐hydroxyaryl)benzenes

Sterically‐engineered rigid trigonal molecular modules based on 1,3,5‐tri(4‐hydroxyphenyl)benzenes H1 and H2 undergo O‐H???O hydrogen‐bonded self‐assembly into eight‐fold catenated hexagonal (6,3) and two‐fold interpenetrated undulated square (4,4) networks, respectively. In the presence of [18]crown‐6 as a guest, the triphenol H1 is found to self‐assemble into a honeycomb network with hexagonal voids created between three triphenol building blocks. The guest [18]crown‐6 molecules are found to be nicely nested in hexagonal enclosures. The empty spaces within the crowns can be further filled with neutral (MeOH/water, MeOH/MeNO₂) or ionic guest species such as KI/KAcAc to furnish novel multicomponent assemblies, that is, guest ? guest ? host, that typify Russian dolls. In contrast, triphenol H2 is found to yield analogous multicomponent molecular crystals in which the guest crown–K⁺ acts as a spacers in the hydrogen‐bonded self‐assembly that leads to distorted chicken wire networks.     

Synthesis of p‐tert‐Butyl‐calix[6] ‐biscrown‐3 via Intramolecular Ring‐closure of 1,4‐Bis (2‐(2‐chloroethoxy) ethoxy) ‐p‐tert‐butyl‐calix[6]arene

With a variation in reaction conditions, 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐calix[6]arene (3) and l,3,5‐tris(2‐(2‐chloroethoxy) ethoxy)‐calix [6] arene (4) or 4 and 4‐chloroethoxyethoxy‐calix[6]crown‐3 (5) were selectively synthesized from p‐tert‐butyl‐calix [6] arene and 2‐(2‐chloroethoxy)ethyltosylate. l,3–4,6‐p‐tert‐butylcalix[6]‐bis‐crown‐3 (6) with (u,u,u,d,d,d) conformation and 1,3–4,5‐p‐tert‐butylcalix[6]‐biscrown‐3 (7) with self‐anchored (u,u, u, u, u, d) conformation were synthesized through an intramolecularly ring‐closing condensation of 1, 4‐bis (2‐(2‐chloroethoxy)ethoxy)‐p‐tert‐butyl‐calix[6]arene (3) in 25% and 15% yield, respectively. Using 5 instead of 3, only 7 was obtained in 65% high yield. 6 and 7 show different complexation properties toward alkali metal and ammonium ions.     

Mechanochemical Encapsulation of Fullerenes in Peptidic Containers Prepared by Dynamic Chiral Self‐Sorting and Self‐Assembly

Molecular capsules composed of amino acid or peptide derivatives connected to resorcin[4]arene scaffolds through acylhydrazone linkers have been synthesized using dynamic covalent chemistry (DCC) and hydrogen‐bond‐based self‐assembly. The dynamic character of the linkers and the preference of the peptides towards self‐assembly into β‐barrel‐type motifs lead to the spontaneous amplification of formation of homochiral capsules from mixtures of different substrates. The capsules have cavities of around 800 ų and exhibit good kinetic stability. Although they retain their dynamic character, which allows processes such as chiral self‐sorting and chiral self‐assembly to operate with high fidelity, guest complexation is hindered in solution. However, the quantitative complexation of even very large guests, such as fullerene C₆₀ or C₇₀, is possible through the utilization of reversible covalent bonds or the application of mechanochemical methods. The NMR spectra show the influence of the chiral environment on the symmetry of the fullerene molecules, which results in the differentiation of diastereotopic carbon atoms for C₇₀, and the X‐ray structures provide unique information on the modes of peptide–fullerene interactions.     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

Design and Synthesis of Calixarene‐Based Bis‐alkynyl‐Bridged Dinuclear AuI Isonitrile Complexes as Luminescent Ion Probes by the Modulation of Au⋅⋅⋅Au Interactions

Two calixarene‐based bis‐alkynyl‐bridged Au^I isonitrile complexes with two different crown ether pendants, [{calix[4]arene‐(OCH₂CONH‐C₆H₄C≡C)₂}{Au(CNR)}₂] (R=benzo[15]crown‐5 ( 1 ); R=benzo[18]crown‐6 ( 2 )), together with their related crown‐free analogue 3 (R=C₆H₃(OMe)₂‐3,4) and a mononuclear gold(I) complex 4 with benzo[15]crown‐5 pendant, have been designed and synthesized, and their photophysical properties have been studied. The X‐ray structure of the ligand, calix[4]arene‐(OCH₂CONH‐C₆H₄C?CH)₂ has been determined. The cation‐binding properties of these complexes with various metal ions have been studied using UV/Vis, emission, ¹H NMR, and ESI‐MS techniques, and DFT calculations. A new low‐energy emission band associated with Au???Au interaction could be switched on upon formation of the metal ion‐bound adduct in a sandwich fashion.     

Capsule-like assemblies in polar solvents

Calix[4]arene derivatives with four anionic groups at their upper rim form discrete 1:1 complexes with complementary calix[4]arene derivatives bearing four cationic groups at their upper rim. Each cation is bound by two anions, and vice versa, in a mutual chelate arrangement, reinforced by a network of ionic hydrogen bonds. These multiple electrostatic interactions lead to the formation of highly stable capsule-like assemblies even in polar protic solvents such as methanol and water. In the capsule interior a cavity is formed that is in principle large enough for the encapsulation of small aliphatic and aromatic guests (170-230 A(3)). Monte Carlo simulations in water reproducibly lead to the same regular opimized structures. These differ mainly by their inner volume and flexibility, as demonstrated by molecular dynamics calculations. Most half-spheres can be synthesized by way of the tetrakis(chloromethyl) or the tetrabromocalix[4]arene intermediate. Oppositely charged calix[6]arenes also form strong complexes, but no indication was found for a lock in the cone conformation. The formation of the ball-shaped complexes from calix[4]arene building blocks was studied with Job plots, NMR titrations, NOESY, and variable-temperature experiments, as well as ESI-MS measurements. Investigations aimed at the inclusion of various guest molecules were carried out with alcohols, sulfoxides, benzene derivatives, and ammonium, as well as pyrazinium guests. Although binding isotherms were generated with cationic guests, these must be considered to be loosely associated around the seam rather than included inside the capsule.     

Studies on Properties of p—Nitrophenylazo Calix[4]arene Derivatives

The p-nitrophenylazo calix[4] arene derivatives la-ld with nonlinear optical(NLO)properties were prepared by the diazo-coupling reaction of calix[4]arene with p-nitrophenyl diazonium.The diazotization reaction of p-nltroaniline was caried out with isoamyl nitrite as a source of nitrous acid in EtONa/EtOH under refluxing conditon.X-Ray crystallographic analysis and ^1H NMR sptectra reveal that they exist as cone conformation in crystal state or in soution.HRS measurements at 1064 nm in THF indicate that p-nitrophenylazo calix[4]arenes have higher hyperpolarizability βz values than the corresponding reference compound 4-(4-nitrophenylazo)-2,6-dimethyl-phenol,without red shift of the charge transfer band.The tetrakis p-nitropheylazo calix[4]arene(2)with longer alkyl chains can form monolayer aht the air/water interface.     

Self-assembly of molecular capsules in polar solvents

[structure: see text] We present a novel type of molecular capsule formed by self-organization of calix[4]arenes with several oppositely charged functional groups located at their upper rims. In highly polar solvents, the complementary half-spheres form stable 1:1 complexes with association constants of up to 7 x 10(5) M(-)(1) in methanol. The cavity inside the capsules is large enough for the inclusion of small aliphatic or (hetero)aromatic guest molecules.     

Cation- and anion-assisted binding of triethylenediamine by zinc bisporphyrinates

The complexation of zinc calix[4]arene or calix[4]pyrrole bisporphyrinates with alkali metal cations, halide anions, and triethylenediamine was studied by ¹H NMR spectroscopy. It was established that the binding of molecules and/or charged particles by various fragments of calix[4]arene and calix[4]pyrrole porphyrins are interrelated processes. This makes it possible to use one process (for example, complexation of the calix[4]arene fragment of the macrocycle with alkali metal cations or complexation of the calix[4]pyrrole fragment with halide ions) as a tool for controlling another process (complexation of the porphyrin fragments of the macrocycle with neutral molecules).     

pH‐Responsive Host−Guest Complexation between a Water‐soluble Pillar[7]Arene and a 2,7‐Diazapyrenium Salt and Its Application in Controllable Self‐assembly

A novel host−guest recognition motif based on a water‐soluble pillar[7]arene ( WP7 ) and a 2,7‐diazapyrenium salt ( DMDAP ) was prepared. According to the integrated results of ¹H NMR, 2D NOESY, UV–vis spectroscopy and fluorescence titration experiments, we demonstrated that the molecular recognition of WP7 to DMDAP in water not only has high association constant but also has pH‐responsiveness. Subsequently, we took advantage of this molecular recognition motif to fabricate a supra‐amphiphile based on WP7 and an amphiphilic 2,7‐diazapyrenium derivative DAPAC . Its controllable self‐assembly in water was also investigated by means of TEM and DLS techniques.