Remarkably stable amphiphilic random copolymer assemblies: A structure–property relationship study

Synthesis of a library of amphiphilic random copolymers from a single reactive pre‐polymer and their self‐assembly is reported. Post‐polymerization modifications of the parent polymer containing pendant N‐hydroxy succinimide (NHS) ester groups with various oligooxyethylene (OE) amines produce amphiphilic random copolymers with same degree of polymerization and equal extent of randomness. ¹H‐NMR and FT‐IR data indicate quantitative substitution in all cases. The critical aggregation concentration (CAC) for all the polymers is estimated to be in the range of 10^?5 M. Stability of these nano‐aggregates is studied by photoluminescence using time dependent F—rster Resonance Energy Transfer (FRET) between co‐encapsulated lipophilic dyes namely DiO and DiI in the hydrophobic pocket of the aggregates. These studies suggest remarkably high stability for all systems. However those with shorter hydrophilic pendant chains are found to be even more robust. Morphology is examined by high resolution transmission electron microscopy (HRTEM) which reveals multi‐micellar clusters and vesicles for polymers containing short and longer OE segments, respectively. Encapsulation efficacy is tested with both hydrophobic and hydrophilic guest molecules. All of them can encapsulate hydrophobic guest pyrene while a hydrophilic dye Calcein can be sequestered only in vesicle forming polymers. Lower critical solution temperature (LCST) is exhibited by only one polymer that contains the shortest OE chains. All polymers exhibit excellent cell viability as determined by MTT assay. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4932–4943     

Fluorine‐containing linear block terpolymers: Synthesis and self‐assembly in solution

Linear triblock terpolymers of poly(n‐butyl methacrylate)‐b‐poly(methyl methacrylate)‐b‐poly(2‐fluoroethyl methacrylate) (PnBMA‐PMMA‐P2FEMA) were synthesized by sequential reversible addition fragmentation chain transfer (RAFT) polymerization. Kinetic studies of the homopolymerization of 2FEMA by RAFT polymerization demonstrated controllable characteristics with fairly narrow polydispersities (～1.30). The resultant PnBMA‐PMMA‐P2FEMA triblock terpolymers were characterized via ¹H NMR, ¹⁹F NMR, and gel permeation chromatography. These polymers formed micellar aggregates in a selective solvent mixture. The as‐formed micelles were analyzed using scanning electron microscopy and dynamic light scattering. It was found that these terpolymers could directly self‐organize into complex micelles in a tetrahydrofuran/methanol mixture with diameters that depended on polymer composition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Optically active hydrocarbon polymers with aromatic side chains. II. Poly-(S)-p-sec-butylstyrene

The synthesis of optically active p-sec-butylstyrene (I) has been carried out starting with (S)-2-phenylbutane (II) having optical purity 88–91%. The optical purity of I thus obtained was found to be 73–75%. The polymerization of I with stereospecific coordinated anionic catalysts gave amorphous polymers, as in the case of many other p-substituted styrene derivatives. The fractions obtained from these polymers have very similar rotatory power at 589 nm which is practically equal to that of polymer of I obtained by nonstereospecific radical initiator and of low molecular weight structural models. Accordingly the ¹L_b electronic transition of the aromatic chromophore shows a very low rotatory strength in all samples examined. This result is related to the lack in solution of conformations with a predominant single chirality of the main chain of the macromolecules derived from I.     

Polymerization of oriented monomers. II. Polymerization of 4-vinylpyridine perchlorate in micellar aggregates

Polymerization of 4-vinylpyridinium perchlorate (I) is studied under isotropic and anisotropic conditions. Anisotropy or orientation of I may be achieved by micelle formation in concentrated aqueous or acid solutions, i.e., above the monomer's critical micelle concentration (CMC). Some properties of the isotropically and anisotropically obtained polymers are comparatively studied with the emphasis placed on the elucidation of their structure by ¹³C-NMR spectroscopy. By the same spectroscopic technique the microstructure of 1,2-polymer is further investigated in conjunction with the proposed polymerization model. It is concluded that polymer structure is affected by the organization of the monomers into micelles whereas their microstructure is not.     

Influence of Surfactant and Charged Monomer Concentrations on Micro-Block Length of Associative Polymers by Micellar Polymerization

In the micellar polymerization to prepare associative polyelectrolyte, the influence of solution environment on hydrophobical micro-block length has been investigated. The results revealed that the aggregation number (N_agg) of surfactant micelles and micro-block length (N_H) of polymers closely related to electrolyte concentration in polymerization solution, and all of the surfactant and charged monomer concentration can change the free counterion concentration (C_aq) to affect N_agg and N_H. Therefore, the N_H with traditional calculation method which N_agg is looked as constant value was not accurate enough. Subsequently, we studied the attribution of N_H to rheological properties. The results indicated that the micro-block length can increase obviously the reversible network strength in solution to make a few contribution of thickening properties of associative polymer.     

Polymerization of vinylpyridinium salts. III. Further studies on the interfacial and isotropic polymerization of 4-vinyl-N-methylpyridinium methylsulfate

In the present study the polymerization of 4-vinyl-N-methylpyridinium methylsulfate at liquid–liquid interfaces is investigated. Various experimental procedures that may favor the interfacial mode of polymerization over the isotropic one are discussed. The effectiveness of the methods was evaluated by physical characterization studies and particularly polymer tacticity. This last property is directly associated with the achieved organization of the monomers at interfaces. ¹³C-NMR technique was used for tacticity determination. According to tacticity, random polymers are primarily obtained that result from an isotropic polymerization in the aqueous phase, where the monomer is extremely soluble. The small predominance of the syndiotactic triad over the isotactic one is explained by the occurrence of an interfacial polymerization induced by the orientation of the monomers. A polymerization model is proposed that justifies the stereospecificity modification of polymerization.     

Stereospecific polymerization of 9-fluorenyl methacrylate: Tacticity effects on the thermal and photophysical properties of the polymers

Poly(9-fluoreneyl methacrylate) was obtained through anionic polymerization with t-BuLi and t-BuMgBr and through radical polymerization with α,α′-azobisisobutyronitrile. Anionic polymerization with t-BuLi in tetrahydrofuran and radical polymerization afforded syndiotactic polymers (rr ∼ 90%), whereas anionic polymerization with Li and Mg initiators in toluene and CH₂Cl₂ led to isotactic polymers. The thermal and photophysical properties of the polymers were examined. A syndiotactic polymer tended to show higher glass transition and decomposition temperatures than an isotactic polymer. However, polymers with different tacticities were not likely to assume specific, distinctive conformations such as a helix or a π-stacked conformation in solution. An isotactic polymer showed stronger interactions in a CH₂Cl₂ solution with 2,4,7-trinitro-9-fluorenylidenemalononitrile, an electron-acceptor molecule, than a syndiotactic polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4656–4665, 2004     

Ring‐opening polymerization of lipoic acid and characterization of the polymer

Thermal polymerization of DL ‐α‐lipoic acid (LPA) in bulk without any initiator proceeded easily above the melting point of LPA. The molecular weight polymer determined by GPC was high. From the ¹H NMR spectra of polymers, poly(LPA) obtained from polymerization of high purity LPA was to consist of cyclic structures, which was confirmed by ESI‐MS. Interlocked polymer consisting of poly(LPA) and dibenzo‐30‐crown‐10 entangled with each other was synthesized by the polymerization of LPA in the presence of dibenzo‐30‐crown‐10. From the DSC analysis of the polymers, glass transition temperature was estimated to be about ?11 °C, but melting point was not observed, indicating that poly(LPA) is an amorphous polymer. By photodecomposition of poly(LPA), M_n was rapidly decreased at the early stage of the decomposition. After that, the M_n of the polymer kept and then was almost constant even for a prolonged reaction time. On the basis of the results, it would be presumed that poly (LPA) obtained form polymerization of high purity LPA includes an interlocked structure. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Preparation of hole transporting polymers by condensation polymerization of triphenylamine derivatives

Hole transporting polymers were prepared by condensation polymerization of triphenylamine and N,N,N',N'‐tetraphenylbenzidine (TPD) having alkyl group with aldehydes in the presence of p‐toluenesulfonic acid. The obtained polymers had molecular weight higher than 10,000 and good film formation ability. It was found that the aromatic amine monomers were connected with aldehyde monomer at the p‐position of the phenyl group. TPD‐aldehyde polymers had almost the same UV absorption and redox potentials as those of TPD monomer indicating that the electronic structure of amine unit did not change by the polymerization. The hole transporting mobility was in the range of 10⁻³‐10⁻⁶cm²/Vs. The electroluminescent device consisting of ITO/TPD polymer/Alq/Mg‐Ag had a maximum luminance of 9000 cd/m².     

Synthesis of novel polymer containing selenium by radical addition polymerization of 1,4-benzenediselenol to 1,4-divinylbenzene

A novel addition polymerization of 1,4-benzenediselenol (BDSe) to 1,4-divinylbenzene (DVB) was carried out with various azo radical initiators [dimethyl 2,2′-azobisisobutyrate (DAIB), 1,1′-azobis(1-acetoxy-1-phenylethane) (AAPE), and AIBN] in toluene at 65 and 75°C under a nitrogen atmosphere. The polymerization proceded without an induction period, and pale-yellowish powder polymers were obtained in 89% yields for 75 h (DAIB), 89% yields for 24 h (AAPE), and 60% yields for 8 h (AIBN). The molecular weight (M_w) of the insoluble polymers in toluene was about 4000 (IBN) to 14,000 (DAIB or AAPE) by GPC. The polymer had an alternating structure of BDSe to DVB units by ¹H-NMR, IR analyses, and selenium contents, but the polymer contained the diselenide linkage by Raman spectroscopy. By AIBN initiator, the yield of the polymers did not increase over 60% and higher molecular weight polymer was hardly obtained. According to the model addition reaction of benzeneselenol to styrene by AIBN, it was found that AIBN was consumed by the side reaction between dimethyl-N-(2-cyano-2-propyl)ketenimine derivedAppl 11 from AIBN and benzeneselenol to give the adduct C, MH⁺ 295 by DCI MS. On the other hand, DAIB and AAPE initiators, which do not form a ketenimine intermediate, gave the polymers of higher molecular weight in a higher yield. The polymer film exhibited high refractive index (n²⁵_D = 1.81) and a reversible phase transition between a transparency and an opaque by thermal mode. © 1994 John Wiley & Sons, Inc.     

Polymerization of N,N-Dialkylacrylamides with Anionic Initiators Modified by Diethylzinc

Abstract

N,N-Dimethyl-, diethyl-, and dipropylacrylamides were polymerized with 1,1-bis(4′-trimethylsilylphenyl)-3-methylpentyllithium (I) in the presence and absence of diethylzinc in THF. Although the polymers produced with I in the absence of diethylzinc have rather broad molecular weight distributions, the addition of diethylzinc to the polymerization systems causes narrow molecular weight distributions of the polymers. The addition of diethylzinc also affect the stereospecificities of the polymers obtained. The poly(N,N-diethylacrylamide) produced with I/diethylzinc (molar ratio of 1/3-15) is highly syndiotactic, while the one obtained with I is isotactic. The configuration of the poly(N,N-dimethylacrylamide) is changed from isotactic to syndio and heterotactic rich by the addition of diethylzinc to the polymerization mixture. Little effect of diethylzinc is observed on the stereospecificity of the polymerization of N,N-dipropylacrylamide. The stoichiometric additive effect of Et₂Zn toward the initiator in the polymerization of DEAA suggests that the coordination of Et₂Zn aggregates with the propagating carbanionic species narrows the molecular weight distribution and controls the tacticity of the polymer.     

Association of hydrophobically α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) in water

The α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) (C_n‐POXZ‐C_n) have been synthesized by a one‐pot process using cationic ring‐opening polymerization with an appropriate initiator and terminating agent. The polymers bearing different alkyl groups C₁₂ and C₁₈ have molecular weight in the range of 2.4 × 10³ to 14 × 10³ with a small polydispersity index. The solution behavior of the free chains has been analyzed in a nonselective solvent, dichloromethane, by small‐angle neutron scattering and dynamic light scattering. These amphiphilic polymers associate in water to form flower‐like micellar structures. Critical micelle concentrations, investigated by fluorescence technique, are in the range of 0.03–0.5 g L^?1 and are dependent on the hydrophilic/lipophilic balance. The structural properties of the aggregates have also been investigated by viscometry. Intrinsic viscosities of these polymers are in the same range as that of the precursors poly(2‐methyl‐2‐oxazoline) (POXZ) and mono‐functionalized polymers. Large viscosity increase corresponding to intermicellar bridging was observed in the vicinity of the micelle overlap concentration. Addition of hydroxypropyl β‐cyclodextrin (HβCD) has dissociated the aggregates and the intrinsic viscosities of the HβCD‐end‐capped chains have become comparable with the ones of POXZ precursor chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2477–2485, 2010     

Synthesis of amphiphilic poly(N‐vinylcaprolactam) using ATRP protocol and antibacterial study of its silver nanocomposite

Atom transfer radical polymerization (ATRP) of N‐vinylcaprolactam (NVCL) was studied by uisng ethyl‐2‐bromoisobutyrate (EIB) as initiator in 1,4‐dioxane. It led to controlled radical polymerization of NVCL, with the molecular weight increased along with the conversion of monomer and a relatively narrow molecular weight distribution could be obtained, as determined by gel permeation chromatography. ¹H NMR showed that the major population of poly(N‐vinylcaprolactam) (PVCL) retained the chain‐end functional group. The living nature of the ATRP for NVCL was confirmed by the experiments of PVCL chain extension. PVCL was further investigated for its ability to form micelles in aqueous media. Self‐assembling of the amphiphilic PVCL leads to the formation of their micellar aggregates in aqueous media which was confirmed by transmission electron microscope. The critical micelle concentration value was calculated from the photophysical changes of Pyrene‐1‐Carboxaldehyde by UV absorption studies and was found to be 0.0320 mg/mL. The polymer nanocomposite was synthesized and examined in view of antibacterial effect against Enterococcus faecalis, Staphylococcus aureus, Escherichia coli, Proteus mirabilis, and Klebsiella pneumonae. It was found that polymer nanocomposite possess strong antibacterial activity against Enterococcus faecalis with minimum inhibitory concentration value of 32 μg/mL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

C3 cyclopolymerization. I. Is the cyclopolymerization of 1,3-bis(p-vinylphenyl)-propane by means of radical or anionic initiators possible?

Polymerization of 1,3-bis(p-vinylphenyl) propane (St-C₃-St) was investigated by using radical and anionic initiators. Radical polymerization yielded linear polymer with pendant styryl groups in pertinent conditions without gelation. Anionic polymerization with n-butyllithium and sodium naphthalene produced insoluble polymers that, according to infrared (IR) spectroscopy, had no cyclized units. On the other hand, phenylmagnesium bromide gave soluble polymer in HMPA-benzene mixed solvent. Zero-valent nickel catalyst also gave soluble polymer. The soluble polymers could be analyzed by several spectroscopies, and it was confirmed that those obtained by anionic and coordination polymerization had no [3.3]paracyclophane units in the main chain. From these results it was concluded that cationic propagation could be assumed if the polymer Of St-C₃-St contained [3.3]paracyclophane units in the main chain.     

Synthesis and characterization of poly(ethylene glycol) diacrylate copolymers containing azobenzene groups prepared by frontal polymerization

A novel polymer matrix containing amino–nitro substituted azobenzene groups was obtained by frontal polymerization. (E)‐2‐(Ethyl(4‐((4‐nitrophenyl)diazenyl)phenyl)amino)ethyl methacrylate (MDR‐1) was copolymerized with poly(ethylene glycol) diacrylate (PEGDA) using this easy and fast polymerization technique. The effect of the amount of the incorporated azo‐monomer into the polymer matrix was studied in detail and correlated to front velocity, maximum temperature, initiator concentration, and monomer conversion. The obtained materials were characterized by infrared spectroscopy (Fourier transform infrared), and their thermal properties were studied by thermogravimetric analysis and differential scanning calorimetry. Moreover, the optical properties of the polymers were studied by absorption spectroscopy in the UV–Vis region. Absorption spectra of the copolymers exhibit a significant blue shift of the absorption bands with respect to the azo‐monomer, due to the presence of H‐aggregates. Cubic nonlinear optical (NLO) characterizations of the PEGDA/MDR‐1 copolymers were performed according to the Z‐Scan technique. It has been proven that samples with higher MDR‐1 content (0.75 mol %) exhibited outstandingly high NLO‐activity with negative NLO‐refractive coefficients in the promising range of n₂ = ?8.057 × 10^?4 esu. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

通过自缩合乙烯基氧阴离子聚合制备超支化聚甲基丙烯酸羟丙酯

由甲基丙烯酸羟丙酯通过自缩合乙烯基氧阴离子聚合(self-condensing vinyl oxyanionic polymerization)制备了端羟基的超支化聚甲基丙烯酸酯. 以氢化钾(KH)和冠醚的复合物为引发剂时, 可以得到高分子量的聚合物. 用¹H NMR和¹³C NMR谱图证实了聚合物的超支化结构. 由于在聚合过程中存在质子转移反应, 引发剂与单体的摩尔比会影响所得聚合物的结构. 超支化聚合物的玻璃化转变温度在58.1～81.4 ℃之间, 且随着引发剂与单体的比例的减小而降低. 当引发剂与单体等摩尔比时, 所得聚合物的支化度为0.49.     

Polymerization of surface-active monomers. VIII. Tacticity of polymers prepared by radical polymerization of quaternary salts of dimethylaminoethyl methacrylate in micellar and isotropic media

The effect of monomer micellization on the polymerization was studied from the standpoint of stereochemistry in the polymerization. Quaternary salts (C_nBr) of dimethylaminoethyl methacrylate with n-alkyl bromide having N (=4, 8 and 12) carbon atoms were polymerized with radical initiators in isotropic and anisotropic media and the resulting polymers were converted to poly (methyl methacrylate) (PMMA) to determine their tacticity. Tacticities of poly (C₁₂Br)s were little affected by initiators and solvents used for their preparations. There was little dependence of the tacticities on alkyl chain length (N) for poly (C_nBr)s prepared in water and dimethylformamide (DMF). Most of polymers produced here conformed to Bernoullian propagation statistics and a definite difference was not found in the tacticities between the polymers prepared in isotropic and anisotropic media. From the results obtained here it was deduced that the micellar aggregation has little influence upon the stereochemistry in the polymerization of the quaternary monomers. © 1994 John Wiley & Sons, Inc.     

Low surface energy polymers and surface active block polymers. I. t-butylphenyl containing polymers

Two new monomers in the 2-oxazoline series were synthesized and polymerized. These were 2-[4-(t-butyl)phenyl]-2-oxazoline ( I ) and 2-[(3-(3,5-di-t-butyl)phenoxy)propyl]-2-oxazoline ( II ). The polymer from I crystallized readily during bulk polymerization and showed T_m at 592 K (319°C). After annealing, the polymer showed a critical surface tension of 23.2 dyn/cm. Polymer from II was amorphous; hence, annealing showed little effect on contact angles. Block polymers were made with I (Xn = 10) and ethyl oxazoline (Xn = 6,20,60). Very sharp molecular weight distributions were obtained. All samples crystallized when annealed. The block polymer was an effective emulsifier for emulsion polymerization of butyl acrylate at 0.1%.     

Polymerization of allyldimethyldodecylammonium bromide in micellar and isotropic media

To study the effect of micellar aggregation upon polymerization and polymer products, the polymerization of the micelle forming monomer allyldimethyldodecylammonium bromide (I) was investigated under both micellar and isotropic conditions. NMR spectroscopy and fluorescence quenching were employed to elucidate the structural characteristics and molecular weight of the polymer obtained by γ-ray irradiation. It was found that (I) undergoes effective polymerization in the micellar state, producing a polymer which consists of a mixture of head to tail and head to head configurations at the ratio 85/15, and has a mean molecular weight of 11,000 ± 1000 daltons.