Microfluidic Device Using a Gold Pillar Array and Integrated Electrodes for On‐chip Endothelial Cell Immobilization,Direct RBC Contact,and Amperometric Detection of Nitric Oxide

We describe a microfluidic device that can be used to detect interactions between red blood cells (RBCs) and endothelial cells using a gold pillar array (created by electrodeposition) and an integrated detection electrode. Endothelial cells can release nitric oxide (NO) via stimulation by RBC‐derived ATP. These studies incorporate on‐chip endothelial cell immobilization, direct RBC contact, and detection of NO in a single microfluidic device. In order to study the RBC‐EC interactions, this work used a microfluidic device made of a PDMS chip with two adjacent channels and a polystyrene base with embedded electrodes for creating a membrane (via gold pillars) and detecting NO (at a glassy carbon electrode coated with platinum‐black and Nafion). RBCs were pharmacologically treated with treprostinil in the absence and presence of glybenclamide, and ATP release was determined as was the resultant NO release from endothelial cells. Treprostinil treatment of RBCs resulted in ATP release that stimulated endothelial cells to release on average 1.8±0.2 nM NO per endothelial cell (average±SEM, n=8). Pretreatment of RBCs with glybenclamide inhibited treprostinil‐induced ATP release and, therefore, less NO was produced by the endothelial cells (0.92±0.1 nM NO per endothelial cell, n=7). In the future, this device can be used to study interactions between many other cell types (both adherent and non‐adherent cell lines) and incorporate other detection schemes.     

Catalytic epoxidation of cyclohexene by covalently linked manganese porphyrin–viologen complex

When a viologen-linked Mn(III)porphyrin complex with a short methylene-chain, in which a viologen is covalently linked by the methylene-chain into one phenyl group of 5,10,15,20-tetraphenylporphyrinatomanganese(III)chloride (Mn(III)(tpp)Cl), was used as a catalyst for a monooxygenation of cyclohexene in an air-equilibrated acetonitrile solution containing insoluble zinc powder as a reductant, more cyclohexene oxide was obtained as a single product than when Mn(tpp)Cl was used as a catalyst. Benzoic acid as a cleaving reagent of the dioxygen double-bond and 1-methylimidazole as a ligand to Mn porphyrin were further contained in the reaction mixture. This result implies that the viologen moiety in the viologen-linked Mn(III)porphyrin acted effectively as a mediator for electron transfer from zinc powder to the Mn(III)porphyrin moiety in the epoxidation cycle activating molecular dioxygen reductively. Though Mn(tpp)Cl was remarkably demetallated by H⁺ ion from benzoic acid during the epoxidation reaction in the mixed system of Mn(III)(tpp)Cl and viologen, the demetallation of the viologen-linked Mn porphyrin with the short methylene-chain was partly prevented because the reduction of a Mn(II)porphyrin-dioxygen adduct was easily caused by fast intramolecular electron-transfer between the two moieties of the viologen and the Mn porphyrin, proceeding the epoxidation cycle smoothly.     

Laser flash photolysis generation and kinetic studies of porphyrin-manganese-oxo intermediates. Rate constants for oxidations effected by porphyrin-Mn(V)-oxo species and apparent disproportionation equilibrium constants for porphyrin-Mn(IV)-oxo species

Porphyrin-manganese(V)-oxo and porphyrin-manganese(IV)-oxo species were produced in organic solvents by laser flash photolysis (LFP) of the corresponding porphyrin-manganese(III) perchlorate and chlorate complexes, respectively, permitting direct kinetic studies. The porphyrin systems studied were 5,10,15,20-tetraphenylporphyrin (TPP), 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPFPP), and 5,10,15,20-tetrakis(4-methylpyridinium)porphyrin (TMPyP). The order of reactivity for (porphyrin)Mn(V)(O) derivatives in self-decay reactions in acetonitrile and in oxidations of substrates was (TPFPP) > (TMPyP) > (TPP). Representative rate constants for reaction of (TPFPP)Mn(V)(O) in acetonitrile are k = 6.1 x 10(5) M(-1) s(-1) for cis-stilbene and k = 1.4 x 10(5) M(-1) s(-1) for diphenylmethane, and the kinetic isotope effect in oxidation of ethylbenzene and ethylbenzene-d(10) is k(H)/k(D) = 2.3. Competitive oxidation reactions conducted under catalytic conditions display approximately the same relative rate constants as were found in the LFP studies of (porphyrin)Mn(V)(O) derivatives. The apparent rate constants for reactions of (porphyrin)Mn(IV)(O) species show inverted reactivity order with (TPFPP) < (TMPyP) < (TPP) in reactions with cis-stilbene, triphenylamine, and triphenylphosphine. The inverted reactivity results because (porphyrin)Mn(IV)(O) disproportionates to (porphyrin)Mn(III)X and (porphyrin)Mn(V)(O), which is the primary oxidant, and the equilibrium constants for disproportionation of (porphyrin)Mn(IV)(O) are in the order (TPFPP) < (TMPyP) < (TPP). The fast comproportionation reaction of (TPFPP)Mn(V)(O) with (TPFPP)Mn(III)Cl to give (TPFPP)Mn(IV)(O) (k = 5 x 10(8) M(-1) s(-1)) and disproportionation reaction of (TPP)Mn(IV)(O) to give (TPP)Mn(V)(O) and (TPP)Mn(III)X (k approximately 2.5 x 10(9) M(-1) s(-1)) were observed. The relative populations of (porphyrin)Mn(V)(O) and (porphyrin)Mn(IV)(O) were determined from the ratios of observed rate constants for self-decay reactions in acetonitrile and oxidation reactions of cis-stilbene by the two oxo derivatives, and apparent disproportionation equilibrium constants for the three systems in acetonitrile were estimated. A model for oxidations under catalytic conditions is presented.     

Detailed mechanism of the autoxidation of N-hydroxyurea catalyzed by a superoxide dismutase mimic Mn(iii) porphyrin: formation of the nitrosylated Mn(ii) porphyrin as an intermediate

The in vitro autoxidation of N-hydroxyurea (HU) is catalyzed by Mn(III)TTEG-2-PyP(5+), a synthetic water soluble Mn(iii) porphyrin which is also a potent mimic of the enzyme superoxide dismutase. The detailed mechanism of the reaction is deduced from kinetic studies under basic conditions mostly based on data measured at pH = 11.7 but also including some pH-dependent observations in the pH range 9-13. The major intermediates were identified by UV-vis spectroscopy and electrospray ionization mass spectrometry. The reaction starts with a fast axial coordination of HU to the metal center of Mn(III)TTEG-2-PyP(5+), which is followed by a ligand-to-metal electron transfer to get Mn(II)TTEG-2-PyP(4+) and the free radical derived from HU (HU˙). Nitric oxide (NO) and nitroxyl (HNO) are minor intermediates. The major pathway for the formation of the most significant intermediate, the {MnNO} complex of Mn(II)TTEG-2-PyP(4+), is the reaction of Mn(II)TTEG-2-PyP(4+) with NO. We have confirmed that the autoxidation of the intermediates opens alternative reaction channels, and the process finally yields NO(2)(-) and the initial Mn(III)TTEG-2-PyP(5+). The photochemical release of NO from the {MnNO} intermediate was also studied. Kinetic simulations were performed to validate the deduced rate constants. The investigated reaction has medical implications: the accelerated production of NO and HNO from HU may be utilized for therapeutic purposes.     

Discrimination of nitroxyl and nitric oxide by water-soluble Mn(III) porphyrins

The water-soluble manganese(III) meso-tetrakis (N-ethylpyridinium-2-yl) porphyrin (Mn(III)TEPyP) and manganese(III) meso-(tetrakis(4-sulfonato-phenyl)) porphyrinate (Mn(III)TPPS) are able to chemically distinguish between HNO and NO donors, reacting with the former in a fast, efficient, and selective manner with concomitant formation of the {MnNO}(7) complex (k(on(HNO)) approximately equal to 10(5) M(-1) s(-1)), while they are inert or react very slowly with NO donors. DFT calculations and kinetic data suggest that HNO trapping is operative at least in the case of Mn(III)TPPS, while catalytic decomposition of the HNO donors (sodium trioxodinitrate and toluene sulfohydroxamic acid) seems to be the main pathway for Mn(III)TEPyP. In the presence of oxygen, the product Mn(II)TEPyP(NO) oxidizes back to Mn(III)TEPyP, making it possible to process large ratios of nitroxyl donor with small amounts of porphyrin.     

Spectroelectrochemical evidence for the nitrosyl redox siblings NO+, NO*, and NO- coordinated to a strongly electron-accepting Fe(II) porphyrin: DFT calculations suggest the presence of high-spin states after reduction of the Fe(II)-NO- complex

Experimental and computational results for the electron-deficient porphyrin complex [Fe(NO)(TFPPBr(8))] (1; TFPPBr(8)=2,3,7,8,12,13,17,18-octabromo-5,10,15,20-tetrakis(pentafluorophenyl)porphyrin) are reported with respect to its electron-transfer behavior. Complex 1 undergoes three one-electron processes: two reversible reductions and one irreversible oxidation. Spectroelectrochemical measurements (IR and UV/Vis/NIR spectroscopy) of (14)NO- and (15)NO-containing material indicate that the first reduction to 1(-) occurs largely on the NO ligand to produce nitroxyl anion (NO(-)) character, as evident from the considerable change in ν(NO) from 1715 to around 1550 cm(-1). The second reduction to 1(2)(-) does not result in a further shift of ν(NO) to lower frequencies, but to a surprising high-energy shift to 1590 cm(-1). This and the notable changes of the characteristic porphyrin vibrations as well as significant changes of the UV/Vis absorptions indicate a porphyrin-centered process; DFT calculations predict the shift of ν(NO) to higher frequencies for the intermediate- and high-spin states of 1(2-). The oxidation of 1 is irreversible on the voltammetry timescale, but chemically reversible in spectroelectrochemical experiments, suggesting that the cationic form dissociates to the corresponding ferric porphyrin and NO. DFT calculations support the interpretation of the experimental results.     

Fluorescence-based nitric oxide detection by ruthenium porphyrin fluorophore complexes

The ruthenium(II) porphyrin fluorophore complexes [Ru(TPP)(CO)(Ds-R)] (TPP = tetraphenylporphinato dianion; Ds = dansyl; R = imidazole (im), 1, or thiomorpholine (tm), 2) were synthesized and investigated for their ability to detect nitric oxide (NO) based on fluorescence. The X-ray crystal structures of 1 and 2 were determined. The Ds-im or Ds-tm ligand coordinates to an axial site of the ruthenium(II) center through a nitrogen or sulfur atom, respectively. Both exhibit quenched fluorescence when excited at 368 or 345 nm. Displacement of the metal-coordinated fluorophore by NO restores fluorescence within minutes. These observations demonstrate fluorescence-based NO detection using ruthenium porphyrin fluorophore conjugates.     

Electronic structure and spectra of nitrosyl complexes with cobalt and manganese porphyrins

The DFT calculations for nitrosyl manganese and cobalt porphyrins were carried out with the use of several density functionals. The binding energy of nitrosyl ligand and spin state of nitrosyl-free manganese porphyrin were determined. The best values of binding energy are obtained from the OLYP functional. The NBO analysis of metal?Cnitrosyl bonding was performed. Electronic spectra of nitrosyl cobalt and manganese porphyrin were calculated with the TDDFT method. The calculated electronic transitions agree well with the experimental data except for the Soret band of (Por)Mn(NO), where they are 0.3?C0.5?eV higher in energy than the experimental ones.     

四(对-硝基)苯基卟啉锰配合物的合成及其轴向配位反应的研究

合成了氯化-四(对-硝基)苯基卟啉锰[简称T(p-NO₂)PPMn(Ⅲ)Cl],用光谱滴定法研究了中心原子与双原子分子及台N有机碱的轴向反应,计算了与有机碱反应的平衡常数及反应分子数,证明卟啉环上的吸电子取代基促进了Mn(Ⅲ)卟啉被还原,轴向配位还原能力顺序为T(p-NO₂)TPPMn(Ⅲ)Cl>(β-NO₂)PPMn(Ⅲ)Cl>photo-DMPrPorMn(Ⅲ)Cl>meso-MDBPTPPMn(Ⅲ)Cl>TPPMn(Ⅲ)Cl。     

Fiber-optic infrared spectroelectrochemical studies of six-coordinate manganese nitrosyl porphyrins in nonaqueous media

The redox behavior of the six-coordinate (por)Mn(NO)(1-MeIm) (por = tetraphenylporphyrin dianion (TPP), tetratolylporphyrin dianion (TTP), or tetra-p-methoxyphenylporphyrin dianion (T(p-OMe)PP)) complexes were examined by cyclic voltammetry at room temperature and at -78 degrees C in two nonaqueous solvents (CH2Cl2 and THF) at a Pt disk electrode. In CH2Cl2 at room temperature, the compounds undergo four oxidations and two reductions within the solvent limit; in THF, the compounds undergo one oxidation and three reductions. In both solvents, the first oxidation represents a chemically irreversible one-electron process involving the rapid loss of nitric oxide. The oxidation occurs at the MnNO site as judged from bulk electrolysis, UV-vis spectroscopy at room temperature, and IR spectroelectrochemistry at room temperature and at -78 degrees C. The second oxidation, accessible in CH2Cl2, is also chemically irreversible and occurs at the porphyrin ring; the third and the fourth oxidations are, on the other hand, chemically reversible but also occur at the porphyrin ring. The first reduction is chemically irreversible in CH2Cl2, occurs at the porphyrin ring, and is followed by loss of NO. In THF, the first reduction is chemically reversible and is followed by reversible loss of NO.     

Electrochemical and spectrophotometric study of the behavior of electropolymerized nickel porphyrin films in the determination of nitric oxide in solution

We describe in this paper an electrochemical and spectrophotometric study of the behavior of an electropolymerized nickel porphyrin film as a sensor for the determination of nitric oxide (NO) in aqueous solution. Our results show that the anodic oxidation of NO at the modified electrode may not be the result of a catalytic effect induced by the porphyrinic complex. However, the current (measured by differential pulse amperometry) and calculated NO concentration showed a linear relationship in the range 15 nM-6 muM in aerobic phosphate buffer solution (pH 7.4). These results provide a fruitful example of calibration of such electrochemical sensors for the selective detection of NO with a calculated detection limit, at a signal-to-noise ratio of three, equal to 1.5 nM.     

A microchip-based endothelium mimic utilizing open reservoirs for cell immobilization and integrated carbon ink microelectrodes for detection

This paper describes the fabrication and characterization of a microfluidic device that utilizes a reservoir-based approach for endothelial cell immobilization and integrated embedded carbon ink microelectrodes for the amperometric detection of extracellular nitric oxide (NO) release. The design utilizes a buffer channel to continuously introduce buffer or a plug of stimulant to the reservoir as well as a separate sampling channel that constantly withdraws buffer from the reservoir and over the microelectrode. A steel pin is used for both the fluidic connection to the sampling channel and to provide a quasi-reference electrode for the carbon ink microelectrode. Characterization of the device was performed using NO standards produced from a NONOate salt. Finally, NO release from a layer of immobilized endothelial cells was monitored and quantified using the system. This system holds promise as a means to electrochemically detect extracellular NO release from endothelial cells in either an array of reservoirs or concurrently with fluorescence-based intracellular NO measurements.     

Simultaneous determination of soluble manganese(III), manganese(II) and total manganese in natural (pore)waters

A new spectrophotometric protocol was developed for the simultaneous determination of soluble Mn(III), Mn(II) and total Mn [sum of soluble Mn(III) and Mn(II)] in sediment porewaters using a water soluble meso-substituted porphyrin [α,β,γ,δ-tetrakis(4-carboxyphenyl)porphine (T(4-CP)P)]. A simple kinetic rate model is used to quantify soluble Mn(II), Mn(III) and total Mn concentrations during a metal substitution reaction. Under optimized conditions, the method accurately determines soluble Mn(II) and Mn(III) within a concentration range of 100 nM-10 μM. The detection limit of total soluble Mn is 50 nM. Using this method, soluble Mn(II) and Mn(III) concentrations were determined in standard solutions within 0.4-2% of the known values and agreed closely with results of inductively coupled plasma mass spectrometric and voltammetric analyses. The procedure was successfully applied to determine soluble Mn(II), Mn(III) and total Mn in sediment porewaters of the Lower St. Lawrence Estuary. Mn(III) represented up to 85% of the total soluble Mn pool in surface sediments.     

Synthesis, characterization and molecular structures of six-coordinate manganese nitrosyl porphyrins

Manganese(II) porphyrins are isoelectronic with iron(III) porphyrins, and previously reported work suggests that manganese nitrosyl porphyrins are good structural models for their kinetically unstable and biologically relevant ferric-NO analogues. We have prepared a new set of six-coordinate manganese nitrosyl porphyrins of the general form (por)Mn(NO)(L)(por = TTP, T(p-OCH3)PP; L = piperidine, methanol, 1-methylimidazole) in moderate to high yields. The (por)Mn(NO)(pip) complexes were prepared from the reductive nitrosylation of the (por)MnCl compounds with NO in the presence of piperidine. The IR spectra of the (por)Mn(NO)(pip) compounds as KBr pellets show new strong bands at 1746 cm(-1)(for TTP) and 1748 cm(-1)(for (T(p-OCH3)PP) due to the NO ligands. Attempted crystallization of one of these compounds (por = TTP) from dichloromethane-methanol resulted in the generation of the methanol complex (TTP)Mn(NO)(CH3OH). Reaction of the (por)Mn(NO)(pip) compounds with excess 1-methylimidazole gave the (por)Mn(NO)(1-MeIm) derivatives in good yields. The IR spectra of these compounds show nu(NO) bands that are approximately 12 cm(-1) lower than those of the (por)Mn(NO)(pip) precursors, indicative of greater Mn-->NO pi-backdonation in the 1-MeIm derivatives. X-Ray crystal structures of three of these compounds, namely (TTP)Mn(NO)(CH3OH), (TTP)Mn(NO)(1-MeIm) and (T(p-OCH3)PP)Mn(NO)(1-MeIm) were obtained, and reveal that the NO ligands in these complexes are linear.     

Electrochemical reduction of Fe(III), Cr(III), and Mn(III) porphyrin complexes in DMSO

The half-wave potentials are given for the electrochemical reduction of Fe(III), Cr(III), and Mn(III) porphyrin complexes. Cyclic voltamperometry was used to study the reversibility of these reactions. An effect was demonstrated for the structure of the porphyrin ligand on the half-wave potentials for the reduction of the Mn(III) complexes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1665–1668, July, 1991.     

First Synthesis of a Binuclear [Mn(II)(bipy)-Fe(III)(porphyrin)] Complex: Spectroscopic Characterization and First Evidence of Reversible Formation of Manganese(III) as Manganese Peroxidase

A [(P)Fe(III)-Mn(II)] bimetallic complex, mimicking the active site of manganese peroxidase, has been synthesized. A modified highly fluorinated porphyrin, 5,10,15-tris(pentafluorophenyl)-20-(o-aminophenyl)porphyrin, has been used to introduce, through a short spacer linked to the amino function, a manganese auxiliary ligand, 6-aminomethyl-2,2'-bipyridine. Two successive metalations by FeCl(2) and MnCl(2) afforded the [(P)Fe(III)-Mn(II)] bimetallic complex that has been characterized by elemental analysis and FAB(+) mass spectrometry. X-band EPR spectroscopy and magnetic susceptibility measurements were in agreement with two high spin Fe(III) and Mn(II) centers without magnetic exchange interaction. Moreover, there is no higher intermolecular association through &mgr;-chloro bridging as observed by EPR with a simpler chloromanganese complex, Mn(bipy)(2)Cl(2), at high concentration. Addition of pentafluoroiodosobenzene in methanol at 0 degrees C led to the progressive and complete disappearance of the EPR Mn(II) signals, that were recovered after addition of a phenol. This result is consistent with Mn(III) formation. This production of Mn(III) requires the presence of the iron porphyrin and is proposed to occur through the intermediate formation of a Fe(IV) dimethoxide species which can be related to the oxidation of Mn(II) catalyzed by manganese peroxidase compound II.     

高分子键联金属卟啉的合成及催化性能的研究

本文合成了一种新型大环网状高分子聚苯乙烯键联的四(4-吡啶基)卟啉和四(4-氨基苯基)卟啉的金属配合物。考察了它们在正己烷羟基化反应中的催化性能。结果表明: 四(4-吡啶基)卟啉锰和高分子键联后稳定性增加, 且活性有所提高。     

Oxygenation of saturated and unsaturated hydrocarbons with sodium periodate catalyzed by manganese(III) tetra-arylporphyrins, to study the axial ligation of imidazole

Competitive oxygenation of cyclooctene and tetralin with sodium periodate catalyzed by Mn^(III)(TPP)OAc, TPP = meso-tetraphenylporphyrin; Mn^(III) (TNP)OAc, TNP =meso-tetrakis(1-naphthyl) porphyrin; Mn^(III) (TMP)OAc, TMP =meso-tetrakis(2,4,6-trimethyl-phenyl)porphyrin; Mn^(III) (TDCPP)OAc, TDCPP =meso-tetrakis(2,6-dichlorophenyl) porphyrin, and Mn^(III) (TPNMe₂-TFPP)OAc, TPNMe₂-TFPP =meso-tetrakis(para-NMe₂-tetrafluorophenyl)porphyrin, was carried out in the presence or absence of imidazole. This study showed that, in the absence of imidazole, selectivity for epoxide formation was high with electron-rich catalysts such as Mn(TPP)OAc, Mn(TNP)OAc and Mn(TMP)OAc, but low with electron-deficient catalysts such as Mn(TDCPP)OAc and Mn(TPNMe₂-TFPP)OAc. Presumably, not only the axial ligation of imidazole to the four-coordinate Mn(III)-center, but also the steric and electronic influences of aryl-substituents on the porphyrin periphery affect the selectivity of the catalytic oxidation reaction.     

Nitric oxide sensor based on carbon fiber covered with nickel porphyrin layer deposited using optimized electropolymerization procedure

Electropolymerization regime of meso-tetrakis(3-methoxy-4-hydroxyphenyl) porphyrin is optimized to yield films possessing both electrocatalytical and permselective properties towards nitric oxide oxidation. The sensor composed of electrochemically oxidized carbon fiber, covered solely with nickel porphyrin derivative layer electropolymerized using our method, is characterized by high selectivity towards nitrite (1:600), ascorbate (1:8000) and dopamine (>1:80), determined by constant potential amperometry at 830 mV (vs. Ag/AgCl). Selectivity for ascorbate and dopamine as well as detection limit for NO (1.5 nM at S/N=3) is 5-10 times better than parameters usually reported for Nafion coated porphyrinic sensors. Nafion coating can further enhance selectivity properties as well as aids to the stability of the sensors' responses.