Nanoporous Ag–GaN thin films prepared by metal‐assisted electroless etching and deposition as three‐dimensional substrates for surface‐enhanced Raman scattering

Three‐dimensional (3D) nanoporous gallium nitride (PGaN) scaffolds are fabricated by Pt‐assisted electroless hydrofluoric acid (HF) etching of crystalline GaN followed by in situ electroless deposition of Ag nanostructures onto the interior surfaces of the nanopores, yielding a large surface area substrate for surface‐enhanced Raman scattering (SERS). The resulting 3D SERS‐active substrates have been optimized by varying reaction parameters and starting material concentration, exhibiting enhanced Raman signals 10–100× more intense than either (1) sputtered Ag‐coated porous GaN or (2) Ag‐coated planar GaN. The increase in SERS signal is attributed to a combination of the large surface area and the inherent transparency of PGaN in the visible spectral region. Overall, Ag‐decorated PGaN is a promising platform for high sensitivity SERS detection and chemical analysis, particularly for reaction and metabolic products that can be trapped inside the highly anisotropic nanoscale pores of PGaN. The potential of this sampling mode is illustrated by the ability to acquire Raman spectra of adenine down to 5 fmol. Additionally, correlated SERS and laser desorption/ionization mass spectrometry spectra can be acquired from same sample spot without further preparation, opening new possibilities for the investigation of surface‐bound molecules with substantially enhanced information content. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering‐based approach for DNA detection at low concentrations via polyvinyl alcohol‐protected silver grasslike patterns

A simple method is demonstrated to detect DNA at low concentrations on the basis of surface‐enhanced Raman scattering (SERS) via polyvinyl alcohol‐protected silver grasslike patterns (PVA‐Ag GPs) grown on the surface of the common Al substrate. By the SERS measurements of sodium citrate and thymine, the PVA‐Ag GPs are shown to be an excellent SERS substrate with good activity, stability and reproducibility. With the use of the tested molecule of thymine, the enhancement factor of the PVA‐Ag GPs is up to ~1.4 × 10⁸. The PVA‐Ag GPs are also shown to be an excellent SERS substrate with good biocompatibility for DNA detection, and the detection limit is down to ~10⁻⁵ mg/g. Meanwhile, the assignations of the Raman bands and the adsorption behaviors of the DNA molecules are also analyzed. In this work, the geometry optimization and the wavenumber analysis of adenine–Ag and guanine–Ag complexes for the ground states are performed using density functional theory, B3LYP functional and the LanL2DZ basis set. The transition energies and the oscillator strengths of adenine–Ag and guanine–Ag for the lowest six singlet excited states were calculated by using the time‐dependent density functional theory method with the same functional and basis set. The results show that the charge transfer in the adenine–Ag and guanine–Ag complexes should be the chemical factor for the SERS of the DNA molecules. Lastly, this method may be employed in large‐scale preparation of substrates that have been widely applied in the Raman analysis of DNA because the fabrication process is simple and inexpensive. Copyright © 2011 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of molecules adsorbed on Co‐doped ZnO nanoparticles

Transition‐metal‐doped semiconductor nanoparticles (NPs) have been well studied for their optical and catalytic properties but seldom studied by surface‐enhanced Raman scattering (SERS). In this paper, transition‐metal‐doped semiconductor NPs are investigated for their SERS property. Four groups of Co‐doped (0.5, 1, 3, and 5%) ZnO (Co ZnO) NPs and pure ZnO NPs were synthesized and studied. When 4‐mercaptobenzoic acid was used as probing molecule, significant SERS signals were obtained on all the five samples. Moreover, it is very interesting to observe a relationship between the Co‐doping concentration and enhancement of the SERS signals. SERS intensities first increase with doping concentration (up to 1%), and then decrease with further increase in doping concentration (up to 5%). Charge transfer (CT) is considered to be the main contribution to this phenomenon. Different CT ratios from substrates to molecules seem to induce different intensities of the SERS signals. In our experiments, the crystalline defects of Co ZnO NPs caused by the Co dopant affect the CT ratios. A possible mechanism of CT from the valance band of Co ZnO NPs to the lower unoccupied molecular orbital of the molecules via energy of the surface states is suggested. X‐ray photoelectron spectra, UV vis spectra, and Raman spectra were used to characterize the structure and defects in Co ZnO NPs. Copyright © 2011 John Wiley & Sons, Ltd.     

Effect of surface morphology on surface‐enhanced Raman scattering of 4‐aminobenzenethiol adsorbed on gold substrates

The substrate‐dependent surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT) adsorbed on Au surfaces has been investigated. 4‐ABT is one of the very unique adsorbate molecules whose SERS spectral patterns are known to be noticeably dependent on the relative contribution of chemical enhancement mechanism vs electromagnetic enhancement mechanism. The SERS spectral patterns of 4‐ABT adsorbed on gold substrates with various surface morphology have thus been analyzed in terms of the symmetry types of the vibrational modes. Almost invisibly weak b₂ type vibrational bands were observed in the SERS spectra of the 4‐ABT adsorbed on Au colloidal sol nanoparticles or commercially available Au micro‐powders because of the weak contribution of the chemical enhancement. However, greatly enhanced b₂ vibrational bands were observed in the spectra of the 4‐ABT molecules adsorbed on the synthesized Au(Zn) sponge or the electrochemically roughened Au(ORC) foil caused by the strong contribution of the chemical enhancement mechanism. Copyright © 2008 John Wiley & Sons, Ltd.     

Trace level detection and identification of nitro‐based explosives by surface‐enhanced Raman spectroscopy

Methods for rapid identification of explosives and their associated compounds at trace level quantities are needed for security screening applications. In this paper, we apply the surface‐enhanced Raman spectroscopy (SERS) to detect and identify traces (as low as tens of pg) of pentaerythritol tetranitrate (PETN), ethylene glycol dinitrate (EGDN), cyclotrimethylene‐trinitramine (RDX) and trinitrotoluene (TNT) using commercially available substrates (Klarite®, Renishaw diagnostics). High quality spectra were achieved within 10 s with a compact Raman spectrometer. Principal component analysis (PCA) of the data was performed to understand what factors affected the spectral variation across the samples. It was found that 76% of the spectral variation was explained by the first three PCs. Score plots for these components showed that the energetic materials can be clearly classified on the basis of SERS spectra also at trace level quantity. Our measurements further demonstrate the potential for using SERS as fast, in situ analytical tool for safety devices, with a sensitivity which competes and, in some cases, overcomes other techniques. Copyright © 2013 John Wiley & Sons, Ltd.     

Detection of total protein in milk using phosphomolybdic acid‐mediated surface‐enhanced Raman spectroscopy

Although many surface‐enhanced Raman scattering (SERS)‐based methods for detecting specific proteins have been studied, simple and direct detection of total protein in liquid using a SERS‐based method remains difficult. In this study, a distinguishable effect on the SERS spectra from pre‐mixture of phosphomolybdic acid (PMA) with protein was found, indicating that PMA could be used as a SERS reporter for total protein detection in a liquid sample. Further experiments confirmed a good linear relationship between a premixed concentration of protein (casein, whey protein or bovine serum albumin) and the SERS intensity of PMA in our SERS system. Using casein as a reference, a PMA‐mediated SERS method was proposed that can quantitatively analyze protein at 2.5–25 µg/ml with a limit of detection of 1.5 µg/ml. Our PMA‐mediated SERS method is a simple and rapid method for quantitative analysis of total protein in milk. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman spectroscopic studies of the 15‐mer DNA thrombin‐binding aptamer

Aptamers are single‐stranded oligonucleotides that selectively bind to their target molecules owing to their ability to form secondary structures and shapes. The 15‐mer (5′‐GGTTGGTGTGGTTGG‐3′) DNA thrombin‐binding aptamer (TBA) binds to thrombin following the formation of a quadruplex structure via the Hoogsten‐type G–G interactions. In the present study, Raman and SERS spectra of TBA and thiolated TBA (used to facilitate covalent bonding to metal nanoparticle) in different conditions are investigated. The spectra of the two analogs exhibit vibrations, such as the C8N7 H2 deformation band at ∼1480 cm⁻¹ of the guanine tetrad, that are characteristic of the quadruplex structure in the presence of K⁺ ions or at low temperature. Interestingly, SERS spectra of the two analogs differ markedly from their respective normal Raman spectra, possibly due to changes in the conformation of the aptamer upon binding, as well as to the specific interaction of individual vibrational modes with the metal surface. In addition, the SERS spectra of the thiolated aptamer show significant changes with different concentrations, which may be due to different orientation of the molecule with respect to the metal surface. This study provides useful information for the development of label‐free aptamer‐based SERS sensors and assays. Copyright © 2009 John Wiley & Sons, Ltd.     

Size‐dependent SERS enhancement of colloidal silver nanoplates: the case of 2‐amino‐5‐nitropyridine

Surface‐enhanced Raman scattering (SERS) spectra of 2‐amino‐5‐nitropyridine (ANP) adsorbed on colloidal silver triangular nanoplates were obtained using samples with different mean sizes and surface plasmon frequencies. The relative SERS enhancement factor for each sample was determined by the analysis of the normalized SERS excitation profiles of ANP vibrational modes for nanoplates in suspension, without aggregation. The SERS profiles are blue‐shifted in relation to the localized surface plasmon peak. The detailed characterization of both morphology and concentration of the samples in addition to a rigorous normalization of the SERS spectra allowed a quantitative correlation between the SERS profiles and the mean size of the nanoplates. This correlation indicated the existence of an optimum size of the nanoplates for maximum Raman enhancement. Copyright © 2008 John Wiley & Sons, Ltd.     

Raman,infrared, SERS and theoretical study of 3‐(1‐phenylpropan‐2‐ylamino) propanenitrile,fenproporex

Infrared, Raman and surface‐enhanced Raman scattering (SERS) spectra of 3‐(1‐phenylpropan‐2‐ylamino)propanenitrile (fenproporex) have been recorded. Density functional theory (DFT) with the B3LYP functional was used for optimizations of ground state geometries and simulation of Raman and SERS vibrational spectra of this molecule. Bands of the vibrational spectra were assigned in detail. The comparison of SERS spectra obtained by using colloidal silver and gold nanoparticles with the corresponding Raman spectrum reveals enhancement and shifts in bands, suggesting a possible partial charge‐transfer mechanism in the SERS effect. Information about the orientation of fenproporex on the nanometer‐sized metal structures is also obtained. Copyright © 2011 John Wiley & Sons, Ltd.     

An improved self‐assembly gold colloid film as surface‐enhanced Raman substrate for detection of trace‐level polycyclic aromatic hydrocarbons in aqueous solution

To detect trace‐level polycyclic aromatic hydrocarbons, some investigations of an improved self‐assembly method are carried out using gold colloid films for the preparation of the surface‐enhanced Raman scattering (SERS)‐active substrate. Extinction spectra and scanning electron microscopy images reveal that controllable surface plasmonic metal substrates can be obtained by increasing the temperature of (3‐aminopropyl)trimethoxysilane solution up to 64.5 °C. The SERS‐active substrates have a high enhancement factor, and they can be both easily prepared and reproducible. With the use of these substrates, different concentrations of pyrene and anthracene in aqueous solutions were detected by SERS. A further enhancement can be supported by shifted excitation Raman difference spectroscopy. Raman signals of pyrene and anthracene adsorbed on gold colloid substrates up to limits of detection at 5 and 1 nmol/l, respectively, can be obtained. The quantitative analysis shows the possibility of in situ detection of polycyclic aromatic hydrocarbons while such gold colloid film serves as a SERS‐active substrate. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy for trace‐level detection of explosives

The detection of explosives and their associated compounds for security screening is an active area of research and a wide variety of detection methods are involved in this very challenging area. Surface‐enhanced Raman scattering (SERS) spectroscopy is one of the most sensitive tools for the detection of molecules adsorbed on nano‐scale roughened metal surface. Moreover, SERS combines high sensitivity with the observation of vibrational spectra of species, giving complete information on the molecular structure of material under study. In this paper, SERS was applied to the detection of very small quantities of explosives adsorbed on industrially made substrates. The spectra were acquired with a compact Raman spectrometer. Usually, a high signal‐to‐noise (S/N) spectrum, suitable for identification of explosive molecules down to few hundreds of picograms, was achieved within 30 s. Our measurements suggest that it is possible to exploit SERS using a practical detection instrument for routine analysis. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman and surface‐enhanced Raman spectra of flavone and several hydroxy derivatives

The Raman and surface‐enhanced Raman spectra (SERS) of flavone and three of its hydroxy derivatives, 3‐hydroxyflavone (3‐HF) and 5‐hydroxyflavone (5‐HF) and quercetin (3,5,7,3′,4′ pentahydroxyflavone) have been obtained. The normal Raman (NR) spectra were taken in the powder form. The SERS spectra were obtained both on Ag colloids and Ag electrode substrates. Assignments of the spectrally observed normal modes were aided by density functional theory (DFT) calculations using the B3LYP functional and the 6‐31 + G* basis, a split valence polarized basis set with diffuse functions. Excellent fits were obtained for the observed spectra with little or no scaling. The most intense lines of the NR spectra are those in the CO stretching region (near 1600 cm⁻¹). These lines are often weakened by proximity to the surface, while other lines at lower wavenumbers, due to in‐plane ring stretches, tend to be strongly enhanced. The SERS spectrum of flavone is weak both on the colloid and on the electrode, indicating weak attachment to the surface. In contrast, the SERS spectra of the hydroxy derivatives of flavone are intense, indicating the assistance of OH groups in attachment to the surface. The spectra of the various species are compared, and a case study of application to detection of a textile dye (Persian berries), which contains quercetin, is presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Detection and analysis of cyclotrimethylenetrinitramine (RDX) in environmental samples by surface‐enhanced Raman spectroscopy

Techniques for rapid and sensitive detection of energetics such as cyclotrimethylenetrinitramine (RDX) are needed both for environmental and security screening applications. Here we report the use of surface‐enhanced Raman scattering (SERS) spectroscopy to detect traces of RDX with good sensitivity and reproducibility. Using gold (Au) nanoparticles (∼90–100 nm in diameter) as SERS substrates, RDX was detectable at concentrations as low as 0.15 mg/l in a contaminated groundwater sample. This detection limit is about two orders of magnitude lower than those reported previously using SERS techniques. A surface enhancement factor of ∼6 × 10⁴ was obtained. This research further demonstrates the potential for using SERS as a rapid, in situ field screening tool for energetics detection when coupled with a portable Raman spectrometer. Copyright © 2010 John Wiley & Sons, Ltd.     

Photonic nanojet‐mediated SERS technique for enhancing the Raman scattering of a few molecules

We report a two‐step enhancement of Raman scattering signal (η) of a few dye molecules. In the first step, high‐quality surface‐enhanced Raman scattering (SERS) substrates have been used. The SERS substrates were fabricated by direct current sputtering of Au followed by thermal annealing. The role of thermal annealing of the SERS substrates and numerical aperture of Raman microscopic objective lens on the enhancement has been studied for optimizing the enhancement in the SERS technique. In the second step, the value of η obtained with conventional SERS technique has been improved significantly with the help of photonic nanojet (PNJ) of an optical microsphere (PNJ‐mediated SERS technique). The signal to noise ratio and reproducibility of the experimental results have been found to be very high. Based on our theoretical simulations on PNJ, a few suitable parameters have been proposed for obtaining better enhancement using this technique. To the best of our belief, this report will enable the SERS community to improve η value with ease. Copyright © 2016 John Wiley & Sons, Ltd.     

Substituent effect on structure and surface activity of N‐methylpyridinium salts studied by FT‐IR,FT‐RS,SERS and DFT calculations

The substituent effect on structure and surface activity of mono‐ and disubstituted N‐methylpyridinium salts was investigated by means of Raman, infrared and surface‐enhanced Raman spectroscopy (SERS). The significant differences observed in Raman and infrared spectra have been correlated with marker bands assigned to in‐plane and out‐of‐plane vibrations, respectively. This vibrational analysis, complemented by quantum chemical calculations (B3LYP/6‐311++G(d,p)) was a basis for investigation of the surface activity of the studied compounds. Significant differences in their SERS spectra related to the enhancement mechanism and adsorbate orientation have been observed and analyzed. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering from polystyrene on gold clusters

Surface‐enhanced Raman scattering (SERS) constitutes a spectroscopic method of rapidly growing importance, and polystyrene is a widely used compound of great industrial importance. In this work, SERS data were obtained from polystyrene samples prepared by vapor deposition of gold and plasma‐induced polymerization of styrene gas. A thorough examination of this data is presented. The relationships between sample preparation parameters, gold‐cluster morphology, and SERS intensity were elucidated. Using Wilson's notation, vibrations were assigned to all bands between 250 and 1750 cm⁻¹ in the ordinary Raman and SERS spectra of polystyrene. The correct assignment of these bands would be a significant achievement because they have been controversial in the literature for ∼30 years. Our assignments were made by reviewing the literature and comparing the assignments found there to spectral data acquired during this study; they were confirmed using density functional theory (DFT) calculations performed on the styrene monomer. The orientation of polystyrene's phenyl ring, relative to the gold surface, was determined. It has been suggested that reactions involving silver catalyze polystyrene degradation during SERS, but we found that silver is not necessary for the degradation to occur. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of 4‐aminobenzenethiol on silver: confirmation of the origin of b2‐type bands

In order to resolve the dispute on the origin of the b₂‐type bands in the surface‐enhanced Raman scattering (SERS) of 4‐aminobenzenethiol (4‐ABT), we have measured its SERS spectra under a variety of conditions, including variable temperature and rotation, electrochemistry, and pH, as well as in the presence of a reducing agent. For comparison, the SERS spectra of 4‐nitrobenzenethiol (4‐NBT) and methyl orange (MO), a prototype azo compound, were also measured. First, we found that 4‐ABT on Ag is not subjected to photoreaction, although 4‐NBT is highly photoreactive on a silver surface. In the electrochemical environment, b₂‐type bands of 4‐ABT lost their intensity at very negative potentials, but the intensity recovered immediately upon raising the potential. In addition, b₂‐type bands were observed under rotation even after lowering the potential. The disappearance and reappearance of the b₂‐type bands could also be observed by bringing the sample of 4‐ABT on Ag into contact consecutively with a borohydride solution and water. This is because the surface potential of Ag is lowered by contact with a borohydride solution. Besides, we found that not only the normal Raman but also the SERS spectral features of 4‐ABT are hardly affected by pH variation, while the spectral features of MO are greatly affected, especially in the region of the NN stretching vibration, suggesting that the possibility of a photoconversion of 4‐ABT to an azo compound is low. Altogether, the b₂‐type bands were attributed to 4‐ABT, appearing in conjunction with the chemical enhancement mechanism in SERS. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication and characterization of SERS‐active silver clusters on glassy carbon

In this article, a novel technique for the fabrication of surface enhanced Raman scattering (SERS) active silver clusters on glassy carbon (GC) has been proposed. It was found that silver clusters could be formed on a layer of positively charged poly(diallyldimethylammonium) (PDDA) anchored to a carbon surface by 4‐aminobenzoic acid when a drop containing silver nanoparticles was deposited on it. The characteristics of the obtained silver clusters have been investigated by atomic force microscopy (AFM), SERS and an SERS‐based Raman mapping technique in the form of line scanning. The AFM image shows that the silver clusters consist of several silver nanoparticles and the size of the clusters is in the range 80–100 nm. The SERS spectra of different concentrations of rhodamine 6G (R6G) on the silver clusters were obtained and compared with those from a silver colloid. The apparent enhancement factor (AEF) was estimated to be as large as 3.1 × 10⁴ relative to silver colloid, which might have resulted from the presence of ‘hot‐spots’ at the silver clusters, providing a highly localized electromagnetic field for the large enhancement of the SERS spectra of R6G. The minimum electromagnetic enhancement factor (EEF) is estimated to be 5.4 × 10⁷ by comparison with the SERS spectra of R6G on the silver clusters and on the bare GC surface. SERS‐based Raman mapping technique in the form of line scanning further illustrates the good SERS activity and reproducibility on the silver clusters. Finally, 4‐mercaptopyridine (4‐Mpy) was chosen as an analyte and the lowest detected concentration was investigated by the SERS‐active silver clusters. A concentration of 1.6 × 10⁻¹⁰ M 4‐Mpy could be detected with the SERS‐active silver clusters, showing the great potential of the technique in practical applications of microanalysis with high sensitivity. Copyright © 2006 John Wiley & Sons, Ltd.     

Understanding tip‐enhanced Raman spectra of biological molecules: a combined Raman,SERS and TERS study

Although conventional Raman, surface‐enhanced Raman (SERS) and tip‐enhanced Raman spectroscopy (TERS) have been known for a long time, a direct, thorough comparison of these three methods has never been carried out. In this paper, spectra that were obtained by conventional Raman, SERS (on gold and silver substrates) and TERS (in ‘gap mode’ with silver tips and gold substrates) are compared to learn from their differences and similarities. Because the investigation of biological samples by TERS has recently become a hot topic, this work focuses on biologically relevant substances. Starting from the TER spectra of bovine serum albumin as an example for a protein, the dipeptides Phe–Phe and Tyr–Tyr and the tripeptide Tyr–Tyr–Tyr were investigated. The major findings were as follows. (1) We show that the widely used assumption that spectral bands do not shift when comparing SER, TER and conventional Raman spectra (except due to binding to the metal surface in SERS or TERS) is valid. However, band intensity ratios can differ significantly between these three methods. (2) Marker bands can be assigned, which should allow one to identify and localize proteins in complex biological environments in future investigations. From our results, general guidelines for the interpretation of TER spectra are proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Multiscale electromagnetic SERS enhancement on self‐assembled micropatterned gold nanoparticle films

In this work, we demonstrate a cascaded, multiplicative electromagnetic enhancement effect in surface‐enhanced Raman scattering (SERS) on periodically micropatterned films made of colloidal gold nanoparticles, prepared by a self‐assembly approach, without implying lithography procedures. The multiplicative enhancement effect is obtained by combining surface plasmon near‐field enhancement due to nanoscale features with far‐field photonic coupling by periodic microscale features. The effect is observed for both internal Raman reporters (molecules attached to the Au colloids before their assembly) and external Raman probes (molecules adsorbed on the samples after film assembly). The ability of the patterned films for far‐field light coupling is supported by reflectivity spectra, which present minima/maxima in the visible spectral range. Finite‐difference time‐domain computer simulations of the electric field distribution also support this interpretation. The fabricated dual‐scale SERS substrates exhibit a good spot‐to‐spot reproducibility and time stability, as proved by the SERS response over a time scale longer than 1 month. The experimental demonstration of this cascaded electromagnetic enhancement effect contributes to a better understanding of SERS and can affect future design of SERS substrates. Moreover, such dual‐scale colloidal films prepared by convective self‐assembly can be of general interest for the broader field of nanoparticle‐based devices. Copyright © 2014 John Wiley & Sons, Ltd.