Hydrolytic metal-mediated coupling of dialkylcyanamides at a Pt(IV) center giving a new family of diimino ligands

Addition of excess R(2)NCN to an aqueous solution of K(2)[PtCl(4)] led to the precipitation of [PtCl(2)(NCNR(2))(2)] (R(2) = Me(2) 1; Et(2) 2; C(5)H(10) 3; C(4)H(8)O, 4) in a cis/trans isomeric ratio which depends on temperature. Pure isomers cis-1-3 and trans-1-3 were separated by column chromatography on SiO(2), while trans-4 was obtained by recrystallization. Complexes cis-1-3 isomerize to trans-1-3 on heating in the solid phase at 110 degrees C; trans-1 has been characterized by X-ray crystallography. Chlorination of the platinum(II) complexes cis-1-3 and trans-1-4 gives the appropriate platinum(IV) complexes [PtCl(4)(NCNR(2))(2)] (cis-5-7 and trans-5-8). The compound cis-6 was also obtained by treatment of [PtCl(4)(NCMe)(2)] with neat Et(2)NCN. The platinum(IV) complex trans-[PtCl(4)(NCNMe(2))(2)] (trans-5) in a mixture of undried Et(2)O and CH(2)Cl(2) undergoes facile hydrolysis to give trans-[PtCl(4)[(H)=C(NMe(2))OH](2)] (9; X-ray structure has been determined). The hydrolysis went to another direction with the cis-[PtCl(4)(NCNR(2))(2)] (cis-5-7) which were converted to the metallacycles [PtCl(4)[NH=C(NR(2))OC(NR(2))=NH]] (11-13) due to the unprecedented hydrolytic coupling of the two adjacent dialkylcyanamide ligands giving a novel (for both coordination and organic chemistry) diimino linkage. Compounds 11-13 and also 14 (R(2) = C(4)H(8)O) were alternatively obtained by the reaction between cis-[PtCl(4)(MeCN)(2)] and neat undried NCNR(2). The structures of complexes 11, 13, and 14 were determined by X-ray single-crystal diffraction. All the platinum compounds were additionally characterized by elemental analyses, FAB mass-spectrometry, and IR and (1)H and (13)C[(1)H] NMR spectroscopies.     

Mechanistic studies on the formation of silver nanowires by a hydrothermal method

Silver (Ag) nanowires were fabricated from silver chloride (AgCl) by the hydrothermal method. The successful formation of Ag nanowires relied on the low solubility of AgCl as a precursor and the structural change of glucose to polymer on the Ag nanowire (protective layer). The Ag(+) ion concentration in the reaction solution containing AgCl was initially low, but after a reaction time of over 12 h, Ag(+) gradually reduced to Ag metal. Transmission electron microscope, Raman spectrometery, and X-ray photoelectron spectroscopy revealed that the surface of the obtained Ag nanowires possessed a carbon-rich layer with a carboxyl group, and the Ag(+) ion coordinated with the carboxyl group of this layer. The difference in the surface-free energy of Ag crystals changed the crystal growth rate that impelled the anisotropic growth of the Ag particles. By examining various reaction conditions, it was determined that the ratio of Cl(-) to Ag(+), reaction temperature, and reaction time are important factors for successful preparation of Ag nanowires. Under the reaction condition that the molar ratio of Cl(-) to Ag(+) at 160 °C for 24 h is above equimolar concentration, uniform Ag nanowires were successfully prepared.     

Pop-the-cork strategy in synthetic utilization of imines: stabilization by complexation and activation via liberation of the ligated species

Treatment of trans-[PtCl(4)(RCN)(2)] (R = Me, Et) with ethanol allowed the isolation of trans-[PtCl(4)[E-NH[double bond]C(R)OEt](2)]. The latter were reduced selectively, by the ylide Ph(3)P[double bond]CHCO(2)Me, to trans-[PtCl(2)[E-NH[double bond]C(R)OEt](2)]. The complexed imino esters NH[double bond]C(R)OEt were liberated from the platinum(II) complexes by reaction with 2 equiv of 1,2-bis(diphenylphosphino)ethane (dppe) in chloroform; the cationic complex [Pt(dppe)(2)]Cl(2) precipitates almost quantitatively from the reaction mixture and can be easily separated by filtration to give a solution of NH[double bond]C(R)OEt with a known concentration of the imino ester. The imino esters efficiently couple with the coordinated nitriles in trans-[PtCl(4)(EtCN)(2)] to give, as the dominant product, [PtCl(4)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)] containing a previously unknown linkage, i.e., ligated N-(1-imino-propyl)-alkylimidic acid ethyl esters. In addition to [PtCl(4)[NH[double bond]C(Et)N[double bond]C(Et)OEt](2)], another compound was generated as the minor product, i.e., [PtCl(4)(EtCN)[NH[double bond]C(Et)N[double bond]C(Et)OEt]], which was reduced to [PtCl(2)(EtCN)[NH[double bond]C(Et)N[double bond]C(Et)OEt]], and this complex was characterized by X-ray single-crystal diffraction. The platinum(IV) complexes [PtCl(4)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)] are unstable toward hydrolysis and give EtOH and the acylamidine complexes trans-[PtCl(4)[Z-NH[double bond]C(Et)NHC(R)[double bond]O](2)], where the coordination to the Pt center results in the predominant stabilization of the imino tautomer NH[double bond]C(Et)NHC(R)[double bond]O over the other form, i.e., NH(2)C(Et)[double bond]NC(R)[double bond]O, which is the major one for free acylamidines. The structures of trans-[PtCl(4)[Z-NH[double bond]C(Et)NHC(R)[double bond]O](2)] (R = Me, Et) were determined by X-ray studies. The complexes [PtCl(4)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)] were reduced to the appropriate platinum(II) compounds [PtCl(2)[NH[double bond]C(Et)N[double bond]C(R)OEt](2)], which, similarly to the appropriate Pt(IV) compounds, rapidly hydrolyze to yield the acylamidine complexes [PtCl(2)[NH[double bond]C(Et)NHC(R)[double bond]O](2)] and EtOH. The latter acylamidine compounds were also prepared by an alternative route upon reduction of the corresponding platinum(IV) complexes. Besides the first observation of the platinum(IV)-mediated nitrile-imine ester integration, this work demonstrates that the application of metal complexes gives new opportunities for the generation of a great variety of imines (sometimes unreachable in pure organic chemistry) in metal-mediated conversions of organonitriles, the "storage" of imino species in the complexed form, and their synthetic utilization after liberation.     

Near-infrared absorbing and emitting Ru(II)-Pt(II) heterodimetallic complexes of dpdpz (dpdpz = 2,3-di(2-pyridyl)-5,6-diphenylpyrazine)

The reaction of 2,3-di(2-pyridyl)-5,6-diphenylpyrazine (dpdpz) with K(2)PtCl(4) in a mixture of acetonitrile and water afforded mono-Pt complex (dpdpz)PtCl(2)4 in good yield, with two lateral pyridine nitrogen atoms binding to the metal center. Two types of Ru(II)-Pt(II) heterodimetallic complexes bridged by dpdpz, namely, [(bpy)(2)Ru(dpdpz)Pt(C≡CC(6)H(4)R)](2+) (7-9, R = H, NMe(2), or Cl, respectively) and [(tpy)Ru(dpdpz)Pt(C≡CPh)] (+) (12), were then designed and prepared, where bpy = 2,2'-bipyridine and tpy = 2,2';6',2'-terpyridine. In both cases, the platinum atom binds to dpdpz with a C(∧)N(∧)N tridentate mode. However, the coordination of the ruthenium atom with dpdpz could either be noncyclometalated (N(∧)N bidentate) or cyclometalated (C(∧)N(∧)N tridentate). The electronic properties of these complexes were subsequently studied and compared by spectroscopic and electrochemical analyses and theoretical calculations. These complexes exhibit substantial absorption in the visible to NIR (near-infrared) region because of mixed MLCT (metal-to-ligand-charge-tranfer) transitions from both the ruthenium and the platinum centers. Complexes 7 and 9 were found to emit NIR light with higher quantum yields than those of the mono-Ru complex [(bpy)(2)Ru(dpdpz)](2+) (5) and bis-Ru complex [(bpy)(2)Ru(dpdpz)Ru(bpy)(2)](4+) (13). However, no emission was detected from complex 8 or 12 at room temperature in acetonitrile.     

Molten gallium as a catalyst for the large-scale growth of highly aligned silica nanowires

The vapor-liquid-solid (VLS) process is a fundamental mechanism for the growth of nanowires, in which a small size (5-100 nm in diameter), high melting point metal (such as gold and iron) catalyst particle directs the nanowire's growth direction and defines the diameter of the crystalline nanowire. In this article, we show that the large size (5-50 microm in diameter), low melting point gallium droplets can be used as an effective catalyst for the large-scale growth of highly aligned, closely packed silica nanowire bunches. Unlike any previously observed results using gold or iron as catalyst, the gallium-catalyzed VLS growth exhibits many amazing growth phenomena. The silica nanowires tend to grow batch by batch. For each batch, numerous nanowires simultaneously nucleate, grow at nearly the same rate and direction, and simultaneously stop growing. The force between the batches periodically lifts the gallium catalyst upward, forming two different kinds of products on a silicon wafer and alumina substrate. On the silicon wafer, carrot-shaped tubes whose walls are composed of highly aligned silica nanowires with diameters of 15-30 nm and length of 10-40 microm were obtained. On the alumina substrate, cometlike structures composed of highly oriented silica nanowires with diameters of 50-100 nm and length of 10-50 microm were formed. A growth model was proposed. The experimental results expand the VLS mechanism to a broader range.     

Platinum(IV) analogues of AMD473 (cis-[PtCl2(NH3)(2-picoline)]): preparative, structural, and electrochemical studies

The preparation and oxidation of the anticancer drug AMD473, cis-[PtCl2(NH3)(2-pic)] (2-pic = 2-methylpyridine), has been investigated. cis-[PtCl2(NH3)(2-pic)] is readily oxidized with peroxide to give the trans-dihydroxoplatinum(IV) complex cis,trans,cis-[PtCl2(OH)2(NH3)(2-pic)]. The crystal structure of this complex reveals that it is highly strained as a result of a steric clash between the methyl group of the 2-picoline ligand and an axial hydroxo ligand, with the Pt-N-C angle adjacent to this clash opened up to an unprecedented 138.6(6) degrees . Attempts at converting the dihydroxoplatinum(IV) complex to dichloro and diacetato analogues were unsuccessful with reaction with HCl leading to loss and protonation of the 2-picoline ligand to form the salt (2-picH)[PtCl5(NH3)] and the platinum(II) complex cis-[PtCl2(NH3)(2-pic)], both confirmed by crystallography. Electrochemical studies revealed that cis,trans,cis-[PtCl2(OH)2(NH3)(2-pic)] is reduced more readily (-714 mV vs Ag/AgCl) than its pyridine analogue cis,trans,cis-[PtCl2(OH)2(NH3)(pyridine)] (-770 mV vs Ag/AgCl) consistent with the steric clash in the former complex destabilizing the platinum(IV) oxidation state.     

Formation process of two-dimensional networked gold nanowires by citrate reduction of AuCl4- and the shape stabilization

Gold nanowires with a two-dimensional (2-D) network structure were formed by citrate reduction of AuCl4- with a low concentration of citrate. The structure change during the growth processes was observed by transmission electron microscopy (TEM) and the variation in concentrations of gold species in the aqueous solution was monitored by UV-vis spectra and Inductively Coupled Argon Plasma Emission Spectrophotometer (ICAP). The formation of 2-D gold nanowires was induced by the small amount of reducing agent because the preliminary gold nanoparticles formed by reduction of AuCl4- were thermodynamically unstable in the aqueous solution due to the insufficient capping of citrate. One of the key points of nanowire formation is the preferential adsorption of AuCl4- instead of citrate ions on the surface of the preliminary gold particles, which results in an attracting force between gold nanoparticles. We propose a hit-to-stick-to-fusion model, in which gold nanoparticles adhere by the attraction force and stick together, causing selective deposition of reduced gold metallic species on the concave surface of the two sticking particles, followed by fusion into nanowires. Nanowires then connect with each other, forming a network structure. The evidence obtained from TEM observation of transformation from gold nanowires on a TEM grid to large nanoparticles by hydrogen gas reduction and time-resolved measurements of gold ions suggest that gold ions not only are crucial for the growth of gold nanowires but also play an important role in stabilizing the shape of gold nanowires during the formation process. This method for synthesizing 2-D gold nanowires is simple and relatively easy application to the synthesis of other metallic nanowires such as silver or platinum is expected.     

Mass spectrometric studies of the formation and reactivity of trans-[PtCl2(Am)(piperidinopiperidine)] x HCl complexes with ubiquitin

trans-[PtCl2(Am)(pip-pip)] x HCl complexes, where Am = ammine, methylamine and dimethylamine, react with ubiquitin to form 1:1 covalent adducts. The platinum complexes bind exclusively to Met1 of ubiquitin forming trans-[PtCl(S-Met1-Ub)(Am)(pip-pip)] adducts. These adducts are reactive towards nucleophiles and react with deoxyguanosine (dGMP) to form the ternary trans-[Pt(dGMP)(S-Met1-Ub) (Am)(pip-pip)] complex which is stable in water and even in the presence of excess glutathione (GSH). Reaction of trans-[PtCl(S-Met1-Ub)(Am)(pip-pip)] with GSH resulted in the rapid formation of the ternary complex trans-[Pt(GS)(S-Met1-Ub)(Am)(pip-pip)] which was not stable and slowly lost the platinum moiety; after 7 days the platinum moiety was completely removed and the native ubiquitin was regenerated.     

Pt3Te4 nanoparticles from tellurium nanowires

We report the synthesis of platinum telluride nanoparticles (Pt(3)Te(4) NPs) in the solution phase at room temperature using a template-assisted method. The dendrimeric aggregates formed are composed of several small units of Pt(3)Te(4) NPs of ～4 nm diameter. Tellurium nanowires (Te NWs) are used as the template and the reducing agent in the growth of NPs which occurs due to the galvanic replacement reaction between Te NWs and PtCl(6)(2-). Surface-enhanced Raman scattering (SERS) of the dispersed Pt(3)Te(4) NPs was studied using crystal violet (CV) as the analyte. SERS sensitivity up to 10(-8) M of CV was observed. The Raman enhancement factor (EF) of adsorbed CV on NP aggregates was calculated to be 1.74 × 10(5). The catalytic ability of the as-synthesized Pt(3)Te(4) NPs for the reduction of 4-nitrophenol (4-NP) was studied.     

丙氨酸铂配合物的合成与表征

顺铂、卡铂等铂配合物目前已经应用于卵巢癌、睾丸癌等肿瘤疾患的治疗,然而这类药物在低剂量下也存在严重的毒副作用,同时还存在溶解性差、不稳定等缺点[1,2,3].寻找高效、低毒的新一代铂类抗癌药物是医药领域的迫切任务.     

Initial nucleation of platinum clusters after reduction of K(2)PtCl(4) in aqueous solution: a first principles study

The initial nucleation of platinum clusters after the reduction of K(2)PtCl(4) in aqueous solution is studied by means of first principles molecular dynamics simulations. A reaction mechanism leading to a Pt dimer is revealed both by gas-phase simulations and by simulations which model the solution environment. The key step of the observed reaction process is the formation of a Pt-Pt bond between a Pt(I) complex and an unreduced Pt(II) complex. In light of this result, we discuss the reduction process leading to the formation of platinum nanoparticles. In the generally accepted model, the nucleation of Pt particles starts only when a critical concentration of Pt(0) atoms is reached. Here, we discuss a complementary mechanism where metal-metal bonds form between Pt complexes in higher oxidation states. This is consistent with a number of experimental results which show that a high concentration of zerovalent atoms is not necessary to start the nucleation.     

Formation of gold-silver nanowires in thin surfactant solution films

Thin, long gold/silver nanowires were grown on substrates in thin surfactant solution films. This growth process occurred exclusively in thinning aqueous films as the water evaporated, and elongated surfactant template structures were formed. The nanowire growth depended on the presence of a relatively high concentration of silver ions (typical Ag:Au mole ratio of 1:1). Tuning the pH value to about 5 in the growth solution was crucial for the nanowire growth. Further development of this process may lead to a simple wet chemical technique for the fabrication of relatively uniform arrays of metal nanowires on surfaces.     

Growth of Au/Ag nanowires in thin surfactant solution films: an electron microscopy study

The surfactant templated gold-silver nanowire growth process in a thin solution film was probed by cryo-transmission electron microscopy (cryo-TEM). The increasing surfactant concentration upon film drying appears to induce phase transformations in the film and form a liquid crystalline template for the nanowires growth. High-resolution transmission electron microscopy (HRTEM) and electron holography revealed that the nanowires were polycrystalline with some preferred crystallite orientations and had a roughly cylindrical cross-section. Further improvement of the technique may lead to highly ordered metal nanowire arrays within the surfactant matrix similar to the closely related mesoporous materials.     

Atropisomerization, C-H activation, and dissociative substitution at some biphenyl platinum(II) complexes

The reaction of 2,2'-dilithiumbiphenyl with cis-[PtCl(2)(SEt(2))(2)] at -10 degrees C in diethyl ether not only leads to the main product [Pt(2)(micro-SEt(2))(2)(bph)(2)], containing the planar 2,2'-biphenyl dianion (bph(2)(-)), but also forms a new dinuclear platinum(II) compound of formula [Pt(2)(micro-SEt(2))(2)(Hbph)(4)], 1a (Hbph(-) = eta(1)-biphenyl monoanion), in which each metal is in a square-planar environment. NMR spectroscopy and molecular mechanics (MMFF) calculations were used to characterize 1a. The results suggest that the favored conformation for the four Hbph biphenyl groups is alphabetabetaalpha. In chloroform solution, 1a undergoes atropisomerization to 1b (alphabetaalphabeta) (k(is) = 1.03 x 10(-)(4) s(-)(1), at 298 K) that subsequently cyclometalates (k(obs) = 4.48 x 10(-)(6) s(-)(1), at 298 K) to yield [Pt(2)(micro-SEt(2))(2)(bph)(2)] and biphenyl. Both processes, atropisomerization and C-H activation, presumably involve preliminary thioether bridge splitting. The dinuclear complex 1a has been shown to be a versatile and useful precursor to a variety of mononuclear eta(1)-biphenyl platinum(II) complexes. By reaction with diethyl sulfide, dimethyl sulfoxide, or with rigid dinitrogen containing ligands, such as 2,2'-bipyridine or 1,10-phenanthroline, complexes cis-[Pt(Hbph)(2)(dmso)(2)] 3, cis-[Pt(Hbph)(2)(SEt(2))(2)] 4, [Pt(Hbph)(2)(bpy)] 5, and [Pt(Hbph)(2)(phen)] 6 were obtained, respectively. The crystal structures of compounds 5 and 6 were determined. Only the head-to-tail isomer of these compounds was recognized in the solid state and in solution, where restricted rotation around the Pt-C bond prevents interconversion to the head-to-head form. A detailed kinetic study of ligand (dmso) exchange and substitution (by 2,2'-bipyridine and 1,10-phenanthroline) has been performed on complex 3 in CDCl(3) and toluene-d(8) by (1)H NMR magnetization transfer experiments, and in toluene by UV/vis spectroscopy, respectively. The rates of both processes show no dependence on ligand concentration, the rate of ligand substitution being in reasonable agreement with that of ligand exchange at the same temperature. The kinetics are characterized by largely positive entropies of activation. The results are consistent with a dissociative mode of activation analogous to the pattern already found for compounds with a similar [Pt(C,C)(S,S)] set of coordinating ligands. The role of ML(3) d(8) T-shaped 14-electron species, as elusive reaction intermediates or structurally characterized compounds, is discussed.     

Highly luminescent mixed-metal Pt(II)/Ir(III) complexes: bis-cyclometalation of 4,6-diphenylpyrimidine as a versatile route to rigid multimetallic assemblies

The proligand 4,6-di-(4-tert-butylphenyl)pyrimidine LH(2) can undergo cycloplatination with K(2)PtCl(4) at one of the two aryl rings to give, after treatment with sodium acetylacetonate, a mononuclear complex Pt(N^C-LH)(acac) (denoted Pt). If an excess of K(2)PtCl(4) is used, a dinuclear complex of the form [Pt(acac)](2){μ-(N^C-L-N^C)} (Pt(2)) is obtained instead, where the pyrimidine ring acts as a bridging unit. Alternatively, the mononuclear complex can undergo cyclometalation with a different metal ion. Thus, reaction of Pt with IrCl(3)·3H(2)O (2:1 ratio) leads, after treatment with sodium acetylacetonate, to an unprecedented mixed-metal complex of the form Ir{μ-(N^C-L-N^C)Pt(acac)}(2)(acac) (Pt(2)Ir). The mononuclear iridium complex Ir(N^C-LH)(2)(acac) (Ir) has also been prepared for comparison. The UV-visible absorption and photoluminesence properties of the four complexes and of the proligand have been investigated. The complexes are all highly luminescent, with quantum yields of around 0.5 in solution at room temperature. The introduction of the additional metal centers is found to lead to a substantial red-shift in absorption and emission, with λ(max) in the order Pt < Pt(2) < Ir < Pt(2)Ir. The trend is interpreted with the aid of electrochemical data and density functional theory calculations, which suggest that the red-shift is due primarily to a progressive stabilization of the lowest unoccupied molecular orbital (LUMO). The radiative decay constant is also increased. This versatile design strategy may offer a new approach for tuning and optimizing the luminescence properties of d-block metal complexes for contemporary applications.     

Pyridine-carboxylate complexes of platinum. Effect of N,O-chelate formation on model bifunctional DNA-DNA and DNA-protein interactions

This paper reports on the chemistry of platinum complexes containing bidentate pyridine-carboxylate (pyAc = pyridin-2-yl-acetate and picEt = pyridine-2-ethylcarboxylate, ethylpicolinate) (N,O) ligands. The pyridine-2-acetate and ethylpicolinate ligands form six- and five-membered chelates, respectively, upon formation of the Pt-carboxylate bond. In all reactions with picEt with various platinum complex starting materials, spontaneous de-esterification of the pendant carboxylate ester occurs to give directly the chelates K[PtCl(2)(pic-N,O)]-trans-[Pt(pic-N,O)(2)] and SP-4,2-[PtCl(pic-N,O)(NH(3))] without any evidence of intermediates. The de-esterification is solvent dependent, and molecular modeling was used to explain this reaction. The reactions of the geometric isomers of [PtCl(pyAc-N,O)(NH(3))] with 5'-guanosine monophosphate, 5'-GMP, and N-acetyl-l-methionine, AcMet, were investigated by NMR spectroscopy. The objective was to ascertain by model chemistry the feasibility of formation of ternary DNA-Pt-protein adducts in biology. Model nucleotide and peptide compounds were formed in situ by chloride displacement giving [PtL(pyAc-N,O)(NH(3))](+) (L = 5'-GMP or AcMet). Competitive reactions were then examined by addition of the complementary ligand L. Sulfur displacement of coordinated 5'-GMP was slow. For SP-4,3-[Pt(AcMet)(NH(3))(PyAc-N,O)](+), a rapid displacement of the sulfur ligand by 5'-GMP was observed, giving SP-4,2-[Pt(5'-GMP-N7)(pyAc-N,O)(NH(3))](+).     

Fabrication of self-supported patterns of aligned beta-FeOOH nanowires by a low-temperature solution reaction

Self-supported patterns of oriented alignment of beta-FeOOH nanowires are fabricated through a simple solution reaction from the complex [Fe(phen)(3)](2+) at 60 degrees C. The alignment of nanowires with a diameter of 40 nm and length of 6 mum is relatively uniform. HRTEM studies show that the growing direction of beta-FeOOH nanowires is perpendicular to the orientation plane of self-formed beta-FeOOH flake-like substrates. In the reaction and crystal growth process, the precursor [Fe(phen)(3)](2+) is undoubtedly vital to the formation of nanowire alignment. In detail, the formation of aligned nanowires is thought to be realized by controlling two competing reactions. Electrochemical and UV-visible measurements suggest that the product might have potential applications in lithium batteries and semiconductor electronics. This synthetic process is simple, mild, clean, reproducible, and free of any template; it provides a novel pathway for the low-temperature growth of nanowires and their simultaneous oriented alignment.     

Aqueous-solution growth of GaP and InP nanowires: a general route to phosphide, oxide, sulfide, and tungstate nanowires

A general synthetic route has been developed for the growth of metal phosphide, oxide, sulfide, and tungstate nanowires in aqueous solution. In detail, cetyltrimethylammonium cations (CTA(+)) can be combined with anionic inorganic species along a co-condensation mechanism to form lamellar inorganic-surfactant intercalated mesostructures, which serve as both microreactors and reactants for the growth of nanowires. For example, GaP, InP, gamma-MnO(2), ZnO, SnS(2), ZnS, CdWO(4), and ZnWO(4) nanowires have been grown by this route. To the best of our knowledge, this is the first time that the synthesis of GaP and InP nanowires in aqueous solution has been achieved. This strategy is expected to extend to grow nanowires of other materials in solution or by vapor transport routes, since the nanowire growth of any inorganic materials can be realized by selecting an appropriate reaction and its corresponding lamellar inorganic-surfactant precursors.     

溶致液晶模板电化学沉积束状铂纳米材料

以非离子型三嵌段共聚物EO106PO70EO106 (F127)/正丁醇/氯铂酸水溶液构建的溶致液晶层状相为模板, 电化学沉积制备铂纳米材料. 透射电镜和扫描电镜显示, 产物为具有高长径比的纳米线形成的束状结构, 能量弥散谱与电极电势分析证实产物为铂单质, 而循环伏安测量表明产物的比表面积约为53 m2•g−1. 对影响产物形貌的因素和产物生成的可能机理进行了分析.     

(35/37)Cl and (16/18)O isotope resolved (195)Pt NMR: unique spectroscopic 'fingerprints' for unambiguous speciation of [PtCl(n)(H(2)O)(6-n)](4-n) (n = 2-5) complexes in an acidic aqueous solution

At high magnetic fields the 128.8 MHz (195)Pt NMR of all the species in the series [PtCl(n)(H(2)O)(6-n)](4-n) (n = 2-6) display unique (35/37)Cl isotope effects resulting in a unique 'fine-structure' of each individual resonance, which constitutes an unambiguous spectroscopic 'fingerprint' characteristic of the structure of the octahedral platinum(iv) complex, provided (195)Pt NMR are recorded at optimum magnetic field homogeneity and carefully controlled temperature (293 ± 0.1 K). The detailed (195)Pt resonance fine-structure observed experimentally can readily be accounted for by an isotopologue and isotopomer model for each complex, showing particularly noticeable differences between stereoisomer pairs such as the cis/trans- and fac/mer-complexes. Moreover partial isotopic (18)O enrichment of the coordinated water molecules in the series [Pt(35/37)Cl(n)(H(2)(16/18)O)(6-n)](n-2) (n = 2-6) confirms this model. This technique can thus be considered a novel, direct spectroscopic method of chemical speciation of appropriate platinum(iv) complexes in solution without reference to accurate chemical shifts of authentic members of such a series. These effects are interpreted qualitatively in terms of the high sensitivity of (195)Pt NMR shielding to very small and subtle Pt-(35/37)Cl and Pt-(16/18)OH(2) bond displacements. Preliminary work shows this also applied to the corresponding bromido-complexes.