Suspension plasma sprayed composite coating using amorphous powder feedstock

Al₂O₃-ZrO₂ composite coatings were deposited by the suspension plasma spray process using molecularly mixed amorphous powders. X-ray diffraction (XRD) analysis shows that the as-sprayed coating is composed of α-Al₂O₃ and tetragonal ZrO₂ phases with grain sizes of 26 nm and 18 nm, respectively. The as-sprayed coating has 93% density with a hardness of 9.9 GPa. Heat treatment of the as-sprayed coating reveals that the Al₂O₃ and ZrO₂ phases are homogeneously distributed in the composite coating.     

The properties of the Y2O3 films exposed at elevated temperature

Yttrium trioxide (Y₂O₃) thin films have been deposited on silicon (1 1 1) substrates by RF magnetron sputtering. The influences of thermal exposure at high temperature in air on the structure, the surface morphology, roughness, and the refractive index of the Y₂O₃ thin film were investigated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), atomic force microscopy (AFM), and spectroscopic ellipsometry (SE). The results indicate that chemical composition of the as-deposited Y₂O₃ film is apparently close to the stoichiometric ratio, and it has a cubic polycrystalline structure but the crystallinity is poor. The monoclinic and cubic phases can coexist in the Y₂O₃ film after thermal exposure to 900 °C, and the monoclinic phase disappears completely after 300 s exposure to 950 °C. The changes of the surface morphology, roughness, and the refractive index of the Y₂O₃ film are closely related to the crystal structure, the internal stress, and various defects influenced by thermal exposure temperature and time.     

Eu/Tb ions co-doped white light luminescence Y2O3 phosphors

Y₂O₃:Eu³⁺, Tb³⁺ phosphors with white emission are prepared with different doping concentration of Eu³⁺ and Tb³⁺ ions and synthesizing temperatures from 750 to 950 °C by the co-precipitation method. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the crystallinity of the synthesized samples increases with enhancing the firing temperature. The photoluminescence spectra indicate the Eu³⁺ and Tb³⁺ co-doped Y₂O₃ phosphors show five main emission peaks: three at 590, 611 and 629 nm originate from Eu³⁺ and two at 481 and 541 nm originate from Tb³⁺, under excitation of 250-320 nm irradition. The white light luminescence color could be changed by varying the excitation wavelength. Different concentrations of Eu³⁺ and Tb³⁺ ions were induced into the Y₂O₃ lattice and the energy transfer from Tb³⁺→Eu³⁺ ions in these phosphors was found. The Commission International de l’Eclairage (CIE) chromaticity shows that the Y₂O₃:Eu³⁺, Tb³⁺ phosphors can obtain an intense white emission.     

Preparation and characteristics of three-layer YSZ-(YSZ/Al2O3)-YSZ TBCs

Novel three-layer YSZ-(YSZ/Al₂O₃)-YSZ (6 wt.% Y₂O₃ partially stabilized ZrO₂) thermal barrier coatings (TBCs) were successfully prepared on Ni-based superalloy substrate using composite sol-gel and pressure filtration microwave sintering (PFMS) techniques. The coatings were evaluated for the cyclic oxidation resistance, thermal barrier effect and the presences of phases and microstructures. FE-SEM results indicate that the coatings were dense and crack-free. The coatings maintained their structural integrity when they were exposed at 1100 for 100 h. They exhibited superior oxidation resistance, spallation resistance and thermal insulation property compared with single-layer YSZ coatings. Moreover, the detailed mechanisms were discussed in order to understand the improved performance of the three-layer TBCs.     

Effect of Young's modulus evolution on residual stress measurement of thermal barrier coatings by X-ray diffraction

Subjected to thermal cycling, the apparent Young's modulus of air plasma-sprayed (APS) 8 wt.% Y₂O₃-stabilized ZrO₂ (8YSZ) thermal barrier coatings (TBCs) was measured by nanoindentation. Owing to the effects of sintering and porous microstructure, the apparent Young's modulus follows a Weibull distribution and changes from 50 to 93 GPa with an increase of thermal cycling. The evolution of residual stresses in the top coating of an 8YSZ TBC system was determined by X-ray diffraction (XRD). The residual stresses derived from the XRD data are well consistent with that obtained by the Vickers indention. It is shown that the evolution of Young's modulus plays an important role in improving the measurement precision of residual stresses in TBCs by XRD.     

Characterization of a thin CeO2-ZrO2-Y2O3 films electrochemical deposited on stainless steel

In this paper, we report for the first time formation of a thin CeO₂-ZrO₂-Y₂O₃ films electrodeposited on a stainless steel substrate. The samples have been characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The XRD and XPS data indicate formation of a solid solution and additional existence of Ce³⁺ states near the surface. After annealing, SEM examination has shown a microstructure formed by dispersed spherical agglomerates having a size between 20 and 60 nm.     

Photoluminescence of Y2O3:Eu thin film phosphors by sol-gel deposition and rapid thermal annealing

Y₂O₃:Eu³⁺ phosphor films have been developed by using the sol-gel process. Comprehensive characterization methods such as Photoluminescent (PL) spectroscopy, X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy were used to characterize the Y₂O₃:Eu³⁺ phosphor films. In this experiment, the XRD profiles show that the Y₂O₃:Eu³⁺ phosphor films crystallization temperature and optimum annealing temperature occur at about 650 and 750 °C, respectively. The optimum dopant concentration is 12 mol% Eu³⁺ and the critical transfer distance (R_c) among Eu³⁺ ions is calculated to be about 0.84 nm. Vacuum environment is more efficient than oxygen and nitrogen to eliminate the OH content and hence yields higher luminescent phosphor films. The PL emission intensity of Y₂O₃:Eu³⁺ phosphor films is also dependent on the annealing time. It was found that the H₂O impurities were effectively eliminated after annealing time of 25 s at 750 °C in vacuum environment. From the experiment results, the schematic energy band diagram of Y₂O₃:Eu³⁺ phosphor films is constructed.     

Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Temperature-dependent photoluminescence properties of (Y, Lu)3Al5O12:Ce phosphors for white LEDs applications

The effects of the excitation wavelength, Ce³⁺ concentration and chemical substitution on the thermal quenching of Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) phosphors were investigated over a temperature range from 30 to 250 °C. The quenching behavior exhibits a complex dependence on the excitation wavelength and Ce³⁺ concentration, which can be attributed to temperature-dependent absorption strength of the different f-d absorption bands and thermally activated concentration quenching with or without energy migrations between Ce³⁺ ions, respectively. With increasing Lu³⁺content the luminescence of (Y, Lu)₃Al₅O₁₂:Ce³⁺ phosphors shows a pronounced blueshift, and simultaneously the temperature quenching is obviously improved due to a decrease in Stokes shift.     

Synthesis and optical properties of Ce-doped Y3Mg2AlSi2O12 phosphors

Y_3−xMg₂AlSi₂O₁₂:Ce_x³⁺ (x=0.015, 0.03 and 0.06) phosphors possessing garnet crystal structure were synthesized by the sol–gel combustion technique. The samples were characterized by application of powder X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, thermal quenching (TQ) and scanning electron microscopy (SEM). Moreover, luminous efficacies (LE), color points and quantum efficiencies (QE) were calculated. Optical properties were studied as a function of Ce³⁺ concentration and annealing temperature. XRD analysis revealed that sintering of polycrystalline Y₃Mg₂AlSi₂O₁₂:Ce³⁺ powders at 1550 °C results in nearly single-phase garnet materials. Phosphors showed broad emission band in the range of 500–750 nm and had the maximum intensity at 600 nm, which results in strongly red-shifted phosphors compared with conventional YAG:Ce phosphors emitting at 560 nm. However, strong concentration quenching has also been observed, probably due to increased Stokes shift.     

Synthesis, characterization and photocatalytic activities of rare earth-loaded BiVO4 catalysts

The BiVO₄-based photocatalysts loaded with rare earth (RE=Ho, Sm, Yb, Eu, Gd, Nd, Ce and La) were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), nitrogen adsorption for the BET specific surface area and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were evaluated by decolorization of methylene blue (MB) under visible light irradiation. The results of XRD, SEM and XPS analysis deduced that the rare earth ions were present as RE₂O₃ in the samples. The DRS analysis showed the shift in the absorbption edge from the UV to the visible range: Ho³⁺-BiVO₄ < Sm³⁺-BiVO₄ < Yb³⁺-BiVO₄ < Eu³⁺-BiVO₄ < Gd³⁺-BiVO₄ < Nd³⁺-BiVO₄ < La³⁺-BiVO₄ < Ce³⁺-BiVO₄ < BiVO_4. Gd³⁺-BiVO₄ had the highest photocatalytic activity among all the RE³⁺-BiVO₄ catalysts. The optimal Gd content was 8 at% under visible light irradiation. This beneficial effect was attributed to the specific electron structure characteristics of gadolinium and the increasing in the separation efficiency of the electron-hole pairs. On the contrast, the other rare earth ions had the detrimental effect on the photocatalytic decolorization of MB.     

Enhanced luminescence in transparent glass ceramics containing BaYF5: Ce3+ nanocrystals

Ce³⁺ doped transparent glass ceramics containing BaYF₅ nanocrystals were prepared by controlled heat treatment of 45SiO₂–15Al₂O₃–10Na₂O–24BaF₂–6Y₂O₃–0.5Ce₂O₃ (mol%) glass. X-ray diffraction and transmission electron microscopy data have revealed the formation of BaYF₅ nanocrystals. Both photoluminescence and X-ray excited luminescence spectra have shown a blue-shift of the emission band of Ce³⁺ on ceramization, which is consistent with the Ce³⁺ environment evolving from a glassy oxide to a fluoride phase. The luminescent intensity of Ce³⁺ ions in the transparent glass ceramics is greatly enhanced compared with the precursor glass under ultraviolet and X-ray excitation. This could be attributed to the Ce³⁺ ions present in the BaYF₅ crystalline phase.     

Preparation and optical properties of Ce activated (Ca1 − x,Srx)Al2Si2O8 phosphors

(Ca_1 − x, Sr_x)Al₂Si₂O₈:0.06Ce³⁺, M⁺ (M⁺ = Li⁺, Na⁺, K⁺) phosphors have been prepared by conventional solid-state reaction method. The structural and optical properties of the phosphors were characterized by X-ray diffraction (XRD) technique and spectrophotometer, respectively. A regular variation was found among the XRD patterns of (Ca_1 − x, Sr_x)Al₂Si₂O₈:0.06Ce³⁺ phosphors based on the changing of Sr content. With the increase of Sr content, the maximum of emission band presented slight blue shifts (~ 15 nm). The luminescence intensity of CaAl₂Si₂O₈:0.06Ce³⁺ and SrAl₂Si₂O₈:0.06Ce³⁺ were significantly enhanced when K⁺ and Li⁺ were incorporated, respectively.     

Effect of iso- and heterovalent additives on characteristics of highly transparent Nd(Yb):Y<Subscript>2</Subscript>O<Subscript>3</Subscript> ceramics

The possibility of synthesis and characteristics of highly transparent Y₂O₃ ceramics doped with Nd³⁺ and Yb³⁺ were studied. The ceramics crystal structure was disordered for the first time by simultaneously substituting Y³⁺ cations by Lu³⁺ or Sc³⁺ isovalent ions and Zr⁴⁺ heterovalent ions. The developed technique allowed synthesis of highly transparent Nd³⁺:Y₂O₃, Nd³⁺: Y₂O₃ + 6 mol % ZrO₂, Nd³⁺: (Lu_0.25Y_0.75)₂O₃ + 6 mol % ZrO₂, Nd³⁺:(Sc_0.25Y_0.75)₂O₃ + 6 mol % ZrO₂, and Yb³⁺:(Sc_0.25Y_0.75)₂O₃ + 6 mol % ZrO₂ ceramics with transmittance to 82.2%. It was shown that introduction of iso- and heterovalent additives Sc₂O₃, Lu₂O₃, and ZrO₂ into Nd³⁺:Y₂O₃ decreases average crystallite sizes to ∼1 μm and reduces the pore content, thus making it possible to produce pore-free ceramics. These additives broaden the spectral band of the ⁴ F _3/2 → ⁴ I _11/2 transition of the neodymium ion to 40 nm.     

Quantification of local oxygen defects around Yttrium ions for yttria-doped ceria–zirconia ternary system

Local coordination structure around Yttrium ions in CeO₂–Y₂O₃ binary and [(CeO₂)_x(ZrO₂)_1?x]_0.8(YO_1.5)_0.2 (x = 0.0 ~ 1.0) ternary system has been investigated by ⁸⁹Y MAS-NMR. NMR spectra are found to be consisted of multiple peaks that can be assigned to 6-, 7- and 8-oxygen coordinated Yttrium ions. Compositional dependence of the spectrum was observed and compared with the previous results for ZrO₂–Y₂O₃ binary system. The present investigation suggested the degree of localization of the oxygen vacancy around the cation is in the order of Zr⁴⁺ > Y³⁺ > Ce⁴⁺. The degree of the oxygen vacancy preference for each cation was quantitatively determined for CeO₂–ZrO₂–Y₂O₃ ternary system the first time.     

Synthesis and luminescent properties of Y6W2O15:Eu phosphors

In this paper, a novel phosphor, Y₆W₂O₁₅:Eu³⁺ was synthesized by thermal decomposition and phase transition of its decatungstate gel precursor. With stepwise increase of temperature to 750 °C, a crystalline phase of Y₆W₂O₁₅:Eu³⁺forms that gives intense red emission when excited at 466 nm, the emission is attributed to the Eu³⁺ ions transitions from ⁵D₀ excited states to ⁷F_J (J=0-4) ground states. The long excitation wavelength proves the Eu³⁺ transition follows the photoexcitation of the oxygen-metal (O→W lmct) charge transfer bands in yttrium tungstate. Some structural information regarding Y₆W₂O₁₅ provided by luminescence is in accord with that characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The long-wavelength excitation properties of this material may find application in the production of red phosphors for white light-emitting diodes (LEDs).     

Effect of Ce codoping on Er-doped bismuth-germanate glass and fiber under 980 nm excitation

Er³⁺/Ce³⁺ codoped bismuth-germanate glasses with the composition of Bi₂O₃-GeO₂-Ga₂O₃-Na₂O were prepared by the conventional melt-quenching method. The absorption spectra, fluorescence spectra, upconversion emission and lifetimes of Er³⁺ ions were measured, and the effects of Ce³⁺-doping on the spectroscopic properties of 1.53 μm band fluorescence of Er³⁺ ion were investigated based on the analysis of energy transfer between Er³⁺ and Ce³⁺ ions. The results indicate that the 1.53 μm band fluorescence intensity can be improved evidently with the Ce³⁺-doped concentration under the excitation of 980 nm. Meanwhile, the theoretical simulation based on the population rate equation and light power propagation equation indicates that the C + L band signal gain can also be improved dramatically by introducing Ce³⁺ ions into the Er³⁺-doped bismuth-germanate glass fiber. Therefore, it is necessary to introduce Ce³⁺ ions when Er³⁺-doped bismuth-germanate glass with low phonon energy is applied to the 1.53 μm band broad Er³⁺-doped fiber amplifier (EDFA).     

Structure,phase composition,and spectral luminescence properties of partially stabilized zirconium dioxide crystals doped with Yb<Superscript>3+</Superscript> ions

Investigation of partially stabilized zirconium dioxide crystals via transmission electron microscopy has revealed a developed twin structure therein. The following compositions of the above crystals have been selected for this study: 97.2 mol % ZrO₂–1.0 mol % Y₂O₃–1.8 mol % Yb₂O₃; 97.2 mol % ZrO₂–2.0 mol % Y₂O₃–0.8 mol % Yb₂O₃; 97.2 mol % ZrO₂–2.5 mol % Y₂O₃–0.3 mol % Yb₂O₃; and 96.3 mol % ZrO₂–3.4 mol % Y₂O₃–0.3 mol % Yb₂O₃. X-ray diffraction analysis of these crystals indicate the presence of transformable (t) and nontransformable (t') tetragonal phases. Optical spectroscopy measurements of ZrO₂–Y₂O₃–Yb₂O₃ crystals with tetragonal and cubic structures have highlighted in Yb³⁺-doped zirconium dioxide samples the formation of the optical centers of the Yb³⁺ ions is observed, whose crystal surrounding is similar to those in cubic zirconium dioxide crystals.     

Preparation, structure and oxide ion conductivity in Ce6−xYxMoO15−δ (x=0.1-1.4) solid solutions

The Ce_6−xY_xMoO_15−δ solid solution with fluorite-related structure have been characterized by differential thermal analysis/thermogravimetry (DTA/TG), X-ray diffraction (XRD), IR, Raman, scanning electric microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. The electric conductivity of samples is investigated by Ac impedance spectroscopy. An essentially pure oxide-ion conductivity of the oxygen-deficiency was observed in pure argon, oxygen and air. The highest oxygen-ion conductivity was found in Ce_5.5Y_0.5MoO_15−δ ranging from 5.9×10⁻⁵ (S cm⁻¹) at 300 °C to 1.3×10⁻² (S cm⁻¹) at 650 °C, respectively. The oxide-ion conductivities remained stable over 80 h-long test at 800 °C. These properties suggested that significant oxide-ionic conductivity exists in these materials at moderately elevated temperatures.     

Integrated chemical process for exothermic wave synthesis of high luminance YAG:Ce phosphors

In this paper, high-luminance yellow-emitting Y₃Al₅O₁₂:Ce³⁺ phosphor (YAG:Ce) microparticles were prepared in a solid flame using a 1.425Y₂O₃+2.5Al₂O₃+0.15CeO₂+k(KClO₃+urea)+mNH₄F precursor mixture (here k is the number of moles of the KClO₃+urea red-ox mixture, and m is the number of moles of NH₄F). The self-sustaining combustion process for the entire reaction sample was provided by the heat generated from the KClO₃+urea mixture. Parametric studies demonstrated that the maximum temperature in the combustion wave varied from 885 to 1200 °C for k=2.0-3.0 mole and m=0-1.5 mole. X-ray analysis results showed that the product obtained in the solid flame consisted of Y₃Al₅O₁₂:Ce³⁺ and KCl phases. Therefore, after dissolving potassium chloride in distillated water, pure-phase YAG:Ce phosphor powder was obtained. The as-prepared YAG:Ce phosphor particles had diameters of 10-25 μm and good dispersity and exhibited luminescence properties comparable to those of YAG:Ce phosphor powders prepared by conventional high-temperature processing.