Bioactivity of SiO2-CaO-P2O5-Na2O glasses containing zinc-iron oxide

Glasses with composition x(ZnO,Fe₂O₃)(65 − x)SiO₂20(CaO,P₂O₅)15Na₂O (6 ≤ x ≤ 21 mol%) were prepared by melt-quenching technique. Bioactivity of the glasses was investigated in vitro by examining apatite formation on the surface of glasses treated in acellular simulated body fluid (SBF) with ion concentrations nearly equal to those in human blood plasma. Formation of bioactive apatite layer on the samples treated in SBF was confirmed by using Fourier transform infrared reflection (FTIR) spectroscopy, grazing incidence X-ray diffraction (GI-XRD) and scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometer. Development of an apatite structure on the surface of the SBF treated glass samples as functions of composition and time could be established using the GI-XRD data. FTIR spectra of the glasses treated in SBF show features at characteristic vibration frequencies of apatite after 1-day of immersion in SBF. SEM observations revealed that the spherical particles formed on the glass surface were made of calcium and phosphorus with the Ca/P molar ratio being close to 1.67, corresponding to the value in crystalline apatite. Increase in bioactivity with increasing zinc-iron oxide content was observed. The results have been used to understand the evolution of the apatite surface layer as a function of glass composition and immersion time in SBF.     

Compositional dependence of in-vitro bioactivity in sodium calcium borate glasses

Borate glasses with composition xCaO (100−x) B₂O₃ (20≤x≤50), where x is in mole percent) and 50CaO·45B₂O₃·5Na₂O have been prepared using conventional melt quench technique. Samples were submerged in simulating body fluid solution (SBF) at 37 °C for various periods of time. After storage the samples were analyzed in order to investigate if a surface layer of hydroxyl carbonate apatite layer (HCA layer/Ca-P layer) had formed. The analysis technique used included Fourier-Transform Infrared Spectroscopy (FTIR). The rate of HCA layer formation on the surface of exposed glass samples is determined by FTIR, percentage weight loss measurements of glass samples in SBF and variation of pH of SBF as a function of time. Increase in calcium content in the glass matrix has shown to decrease the rate of HCA formation on glass surfaces. The borate glass with x=20 has shown HCA layer formation on glass surface within two days of dipping. The bone like apatite formation of glass surface demonstrates the potential of glass for integration with bone.     

Writing of two-dimensional crystal curved lines at the surface of Sm2O3-Bi2O3-B2O3 glass by samarium atom heat processing

Two-dimensional crystal curved lines consisting of the nonlinear optical Sm_xBi_1−xBO₃ phase are fabricated at the surface of 8Sm₂O₃·37Bi₂O₃·55B₂O₃ glass by continuous wave Nd:YAG laser (wavelength: 1064 nm) irradiation (samarium atom heat processing) with a power of ∼0.9 W and a laser scanning speed of 5 μm/s. The curved lines with bending angles of 0-90° or with sine-shapes are written by just changing the laser scanning direction. The polarized micro-Raman scattering spectra for the line after bending are the same as those for the line before bending, indicating that the crystal plane of Sm_xBi_1−xBO₃ crystals to the crystal growth direction might be maintained even after the change in the laser scanning direction. It is found from laser scanning microscope observations that the crystal lines at the surface are swelled out smoothly, giving a height of about 10 μm.     

Magnetic and bioactivity evaluation of ferrimagnetic ZnFe2O4 containing glass ceramics for the hyperthermia treatment of cancer

Glass ceramics of the composition xZnO·25Fe₂O₃·(40−x)SiO₂·25CaO·7P₂O₅·3Na₂O were prepared by the melt-quench method using oxy-acetylene flame. Glass-powder compacts were sintered at 1100 °C for 3 h and then rapidly cooled at −10 °C. X-ray diffraction (XRD) revealed 3 prominent crystalline phases: ZnFe₂O₄, CaSiO₃ and Ca₁₀(PO₄)₆(OH)₂. Vibrating sample magnetometer (VSM) data at 10 KOe and 500 Oe showed that saturation magnetization, coercivity and hence hysteresis area increased with the increase in ZnO content. Nano-sized ZnFe₂O₄ crystallites were of pseudo-single domain structure and thus coercivity increased with the increase in crystallite size. ZnFe₂O₄ exhibited ferrimagnetism due to the random distribution of Zn²⁺ and Fe³⁺ cations at tetrahedral A sites and octahedral B sites. This inversion/random distribution of cations was probably due to the surface effects of nano-ZnFe₂O₄ and rapid cooling of the material from 1100 °C (thus preserving the high temperature state of the random distribution of cations). Calorimetric measurements were carried out using magnetic induction furnace at 500 Oe magnetic field and 400 KHz frequency. The data showed that maximum specific power loss and temperature increase after 2 min were 26 W/g and 37 °C, respectively for the sample containing 10% ZnO. The samples were immersed in simulated body fluid (SBF) for 3 weeks. Scanning electron microscope (SEM), energy dispersive spectroscopy (EDX) and XRD results confirmed the growth of precipitated hydroxyapatite phase after immersion in SBF, suggesting that the ferrimagnetic glass ceramics were bioactive and could bond to the living tissues in physiological environment.     

Investigation of the surface reactivity of a sol-gel derived glass in the ternary system SiO2-CaO-P2O5

A new glass formulation, with the molar composition 60% SiO₂-35% CaO-5% P₂O₅, was synthesized using the sol-gel process, for applications as biomaterial in orthopaedic or maxillo facial surgery. Pellets, made of glass powder, were uniaxially compacted and soaked in simulated body fluid (SBF) for up to 7 days at 37 °C to evaluate glass bioactivity. Ionic exchanges at the interface glass-SBF were evaluated by studying evolutions of calcium, phosphorus and silicon concentrations in SBF using ICP-OES. Changes in glass surface, and the formation of crystalline phases were analyzed using XRD, SEM, EDS and FTIR methods.Results form ICP-OES showed a high reactivity of the glass surface with a very high and continuous release of calcium, a limited glass dissolution and an uptake of phosphorous from SBF. Results from both FTIR and XRD analysis indicated that the glass surface was progressively covered by two different phases: CaCO₃ as calcite and a carbonated apatite layer. The formation of these phases, following two different schemas, was observed after 2 h of immersion and confirmed after 7 days. SEM micrographs and EDS analysis demonstrated that the main phase, a carbonated apatite, was present as micro-spheroids and the secondary phase, calcite, was materialized by agglomerates which have diameters up to 10-15 μm. These results are in accordance with a bioactive feature of the glass studied.     

Structural investigation of xAg2O·(100−x)·[2B2O3·As2O3] glasses doped with manganese ions

Structural analysis of x[(100−y)Ag₂O·yMnO]·(100−x)[2B₂O₃·As₂O₃] glasses, with x=10 mol% and 0≤y≤10 mol%, was performed by means of FT-IR and FT-Raman spectroscopies. The purpose of this work is to investigate the structural changes that appear in the xAg₂O·(100−x)·[2B₂O₃·As₂O₃] glasses with the addition and increase in manganese ions content. FT-IR measurements revealed the presence of pyro-, ortho-, di-, tri-, tetra- and penta-borate groups and structural units characteristic to As₂O₃ in the structure of the studied glasses. FT-IR spectroscopy measurements also show that BO₃ units are the main structural units of the glass system. The presence of structural units characteristic to Ag₂O were not directly evidenced by FT-IR spectroscopy. In addtition, the FT-Raman analysis evidenced the presence of boroxol rings in the structure of the studied glasses.     

Spectroscopic analysis and magnetic susceptibility of CuO-TeO2-V2O5 glasses

This article reports on the structure of the glassy system xCuO-65TeO₂-(35−x)V₂O₅, 5≤x≤10 mol% which was studied using infrared (IR) and Raman spectroscopy methods as well as magnetic susceptibility measurements. IR and Raman spectroscopy analysis reveals the presence of four main absorption bands attributed to [TeO₃], [TeO₄], [VO₄], and [VO₅] structure units. It suggests that Cu²⁺ ions occupy the available open spaces of the Te-O network without straining the bonds too much. Increasing the concentration of Cu²⁺ ions beyond 5 mol% results in the modification of the glass by straining and locally distorting the surrounding of the Te-O network. The magnetic susceptibility of these materials was investigated in the temperature range of 5-200 K revealing the paramagnetic behavior described by the Curie-Weiss law and indicating the presence of weak antiferromagnetic exchange interactions between Cu ions. The magnetic entropy change of the glasses was determined based on the temperature and magnetic field dependence of magnetization.     

Spectroscopic study of ZnO doped CeO2-PbO-B2O3 glasses

Glass samples of compositions xZnO-xCeO₂-(30−x)PbO-(70−x)B₂O₃ with x varying from 2% to 10% mole fraction are prepared by the melt quench technique. The structural and optical analysis of glasses is carried out by XRD, FTIR, density and UV-visible spectroscopic measurement techniques. The FTIR spectral analysis indicates that with the addition of ZnO contents in glass network, structural units of BO₃ are transformed into BO₄. It has been observed in our previous work that band gap decreases from 2.89 to 2.30 eV for CeO₂-PbO-B₂O₃ glasses with cerium content varying from 0% to 10% [Gurinder Pal Singh, Davinder Paul Singh, Physica B 406(3) (2011) 640-644]. With the incorporation of zinc in CeO₂-PbO-B₂O₃ glasses, the optical band gap energy decreases further from 2.38 to 2.03 eV. This causes more compaction of the borate network, which results in an increase of density (3.39-4.02 g/cm³). Transmittance shows that ZnO in glass samples acts as a reducing agent thathelps to convert Ce⁴⁺→Ce³⁺ ions.     

EPR and magnetic susceptibility studies of iron ions in ZnO-Fe2O3-SiO2-CaO-P2O5-Na2O glasses

Room temperature electron paramagnetic resonance (EPR) spectra and temperature dependent magnetic susceptibility data have been obtained on bulk x(ZnO,Fe₂O₃)(65−x)SiO₂20(CaO, P₂O₅)15Na₂O (6≤x≤21 mole%) glasses prepared by melt quenching method. EPR spectra of the glasses revealed absorptions centered at g≈2.1 and 4.3. The variations of the intensity and line width of these absorption lines with composition have been interpreted in terms of the variation in the concentration of the Fe²⁺ and Fe³⁺ ions in the glass and the interaction between the iron ions. EPR and magnetic susceptibility data of the glasses reveal that both Fe²⁺ and Fe³⁺ ions are present in the glasses, with their relative concentration being dependent on the glass composition. The studies reveal superexchange type interactions in these glasses, which are strongly dependent on their iron content.     

Investigation of spectroscopic properties and thermal stability of Er/Yb-co-doped Bi2O3-B2O3-Ga2O3 glasses

A series of Er³⁺/Yb³⁺-co-doped 60Bi₂O₃-(40−x) B₂O₃ -xGa₂O₃ (BBGA x=0, 4, 8, 12, 16 mol%) glasses have been prepared. The absorption spectra, emission spectra, fluorescence lifetime of Er³⁺:⁴I_13/2 level and thermal stability were measured and investigated. Three Judd-Ofelt intensity parameters Ω_t (t=2,4,6) (Ω₂=(4.67-5.93)×10⁻²⁰ cm², Ω₄=(1.50-1.81)×10⁻²⁰ cm², Ω₆=(0.92-1.17)×10⁻²⁰ cm²) of Er³⁺ ions were calculated by Judd-Ofelt theory. It is found that the Ω₆ first increases with the increase of Ga₂O₃ content from 0 to 8 mol% and then decreases, which is mainly affected by the number of non-bridging oxygen ions of the glass network. The high peak of stimulated emission cross-section () of Er³⁺: ⁴I_13/2→⁴I_15/2 transition were obtained according to McCumber theory and broad full width at half maximum (FWHM=69-76 nm) of the ⁴I_13/2→⁴I_15/2 transition of Er³⁺ ions were measured. The results indicate that these new BBGA glasses can be used as a candidate host material for potential broadband optical amplifiers.     

Magnetoresistive properties of Zn1−xCoxFe2O4 ferrites

The magnetic and magnetoresistive properties of spinel-type Zn_1−xCo_xFe₂O₄ (x=0, 0.2 and 0.4) ferrites are extensively investigated in this study. A large negative magnetoresistance (MR) effect is observed in Zn_1−xCo_xFe₂O₄ ferrites of spinel structure. These materials are either ferrimagnetic or paramagnetic at room temperature, and show a spin-(cluster) glass transition at low temperatures, depending on the chemical compositions. The MR curves as a function of magnetic fields, MR(H), are parabolic at all temperatures for paramagnetic polycrystalline ZnFe₂O₄. The MR for ZnFe₂O₄ at 110 K in the presence of 9 T applied magnetic field is 30%. On the other hand, MR(H) are linear for x=0.2 and 0.4 ferrimagnetic Zn_1−xCo_xFe₂O₄ samples up to 9 T. The MR effect is independent of the sintering temperatures, and can be explained with the help of the spin-dependent scattering and the Yafet–Kittel angle of Zn_1−xCo_xFe₂O₄ mixed ferrites.     

Conversion of covalent to ionic character of V2O5–CeO2–PbO–B2O3 glasses for solid state ionic devices

xV₂O₅–xCeO₂–(30−x)PbO–(70−x) B₂O₃ glasses are synthesized by using the melt quench technique. The number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.20 to 1.78 eV and density increases from 3.49 to 4.25 g/cm³. FTIR spectroscopy reveals that incorporation of V₂O₅ in glass network helps to convert the structural units of [BO₃] into [BO₄]. At higher concentration of vanadium, VO vibration of [VO₅] structural units and V–O–V vibration are present. The bond ionicity of glasses increases with incorporation of V₂O₅ contents.     

Influence of valence states and co-ordination of cobalt ions on dielectric properties of PbO-Bi2O3-As2O3:CoO glass system

The glasses of the composition (40−x) PbO-15Bi₂O₃-45As₂O₃-xCoO, with 0≤x≤0.6 mol% in the steps of 0.1 were synthesized. The dielectric properties viz., dielectric constant, loss and ac conductivity over moderately larger ranges of frequency and temperature were investigated. The results were analyzed with the aid of the data on optical absorption and IR spectra. The analysis indicated that there is an increase in the insulating strength of the glasses with increase in the concentration of CoO up to 0.4 mol%.     

Effect of Bi2O3 on EPR, optical transmission and DC conductivity of vanadyl doped alkali bismuth borate glasses

Glasses with composition xBi₂O₃·(30−x)M₂O·70B₂O₃ (M=Li, Na) containing 2 mol% V₂O₅ have been prepared over the range 0≤x≤15 (x is in mol%). The electron paramagnetic resonance spectra of VO²⁺ of these glasses have been recorded in the X-band (≈9.3 GHz) at room temperature (RT≈300 K). Spin Hamiltonian parameters, g_∥, g_⊥, A_∥, A_⊥, dipolar hyperfine coupling parameter, P, and Fermi contact interaction parameter, K, have been calculated. The molecular orbital coefficients, α² and γ², have been calculated by recording the optical transmission spectra. In xBi₂O₃·(30−x)Li₂O·70B₂O₃ glasses there is decrease in the tetragonality of the V⁴⁺O₆ complex for x up to 6 mol% whereas for x≥6 mol%, tetragonality increases. In xBi₂O₃·(30−x)Na₂O·70B₂O₃ glasses there is increase in the tetragonality of the V⁴⁺O₆ complex with increasing x. The 3d_xy orbit expands with increase in Bi₂O₃:M₂O ratio. Values of the theoretical optical basicity, Λ_th, have also been reported. The DC conductivity increases with increase in temperature. The order of conductivity is 10⁻⁵ ohm⁻¹ m⁻¹ at low temperature and 10⁻³ ohm⁻¹ m⁻¹ at high temperature. The DC conductivity decreases and the activation energy increases with increase in Bi₂O₃:M₂O ratio.     

Ordered fluorite phases in the Bi2O3-Ta2O5 system: A structural and electrical investigation

Structure and electrical behaviour are reported for the system Bi_1-xTa_xO_1.5 + x (0.167 ≤ x ≤ 0.250). In the compositional range 0.200 < x ≤ 0.250 an incommensurately modulated pseudo-cubic phase (type II) is observed, with the appearance of a larger pseudo-cubic phase in the region 0.167 ≤ x ≤ 0.200. Structural analysis of the type II phases by neutron diffraction reveals subtle changes in the oxide ion distribution with temperature, associated with changes in the incommensurate modulation parameter. Analysis of the defect structure of the type II phase reveals chains of tantalate octahedra as a likely structural motif. It is proposed that these chains facilitate an electronic contribution to total conductivity at low temperatures through electron hopping along the chains. Changes in oxide ion vacancy ordering may explain the observed non-linear behaviour in the thermal expansion of lattice parameter and Arrhenius plots of total conductivity.     

Optical absorption and thermoluminescence studies on LiF-Sb2O3-B2O3 glasses doped with Ni ions

20LiF-(30−x)Sb₂O₃-50B₂O₃:xNiO glasses with the value of x (ranging from 0 to 1.0 mol% in steps of 0.2) were prepared. A number of studies, viz. differential scanning calorimetry, optical absorption, magnetic susceptibility and thermoluminescence, on these glasses were carried out as a function of nickel ion concentration. An anomaly has been observed in all the properties of these glasses when NiO concentration is about 0.6 mol%. The results of these studies were analysed in the light of different environments of nickel ions in the glass network.     

Study on the surface bioactivity of novel magnetic A-W glass ceramic in vitro

Novel magnetic A-W glass ceramic (M GC) in the system MgO-CaO-SiO₂-P₂O₅-CaF₂-MnO-ZnO-Fe₂O₃ was synthesized by doping Mn-Zn ferrite to apatite-wollastonite glass ceramic. The phase composition was investigated by XRD. The magnetic property was measured by VSM. The in vitro bioactivity was tested by immersion in simulated body fluid. The result shows apatite, wollastonite, fluorapatite and Zn_0.75Mn_0.75Fe_1.5O₄ are the main phases of M GC. Under a magnetic field of 10,000 Oe, the saturation magnetization and coercive force of the material are 6 emu g⁻ and 180 Oe, respectively. After soaking in SBF for 14 days, the surface of M GC is coated by a hydroxycarbonate apatite layer.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.     

Synthesis and characterization of room-temperature ferromagnetism in Fe- and Ni-co-doped In2O3

Observation of room-temperature ferromagnetism in Fe- and Ni-co-doped In₂O₃ samples (In_0.9Fe_0.1−xNi_x)₂O₃ (0?x?0.1) prepared by citric acid sol-gel auto-igniting method is reported. All of the samples with intermediate x values are ferromagnetic at room-temperature. The highest saturation magnetization (0.453 μ_B/Fe+Ni ions) moment is reached in the sample with x=0.04. The highest solubility of Fe and Ni ions in the In₂O₃ lattice is around 10 and 4 at%, respectively. The 10 at% Fe-doped sample is found to be weakly ferromagnetic, while the 10 at% Ni-doped sample is paramagnetic. Extensive structure including Extended X-ray absorption fine structure (EXAFS), magnetic and magneto-transport including Hall effects studies on the samples indicate the observed ferromagnetism is intrinsic rather than from the secondary impurity phases.     

Dielectric dispersion in PbO-Sb2O3-As2O3:V2O5 glasses

Dielectric properties, viz. dielectric constant ε′, loss tan δ and a.c conductivity σ_ac (over a wide range of frequency and temperature) and dielectric breakdown strength of PbO-Sb₂O₃-As₂O₃ glasses doped with V₂O₅ (ranging from 0 to 0.5 mol%) are studied. Analysis of these results, based on optical absorption and ESR spectra, indicates that the insulating strength of the glasses is comparatively high when the concentration of V₂O₅ is about 0.3 mol% in the glass matrix.