A combined finite volumes - finite elements method for a low-Mach model

In this paper, we develop a finite volumes - finite elements method based on a time splitting to simulate some low-Mach flows. The mass conservation equation is solved by a vertex-based finite volume scheme using a τ-limiter. The momentum equation associated with the compressibility constraint is solved by a finite element projection scheme. The originality of the approach is twofold. First, the state equation linking the temperature, the density, and the thermodynamic pressure is imposed implicitly. Second, the proposed combined scheme preserves the constant states, in the same way as a similar one previously developed for the variable density Navier-Stokes system. Some numerical tests are performed to exhibit the efficiency of the scheme. On the one hand, academic tests illustrate the ability of the scheme in term of convergence rates in time and space. On the other hand, our results are compared to some of the literature by simulating a transient injection flow as well as a natural convection flow in a cavity.     

Modeling Variable Density Flow and Solute Transport in Porous Medium: 1. Numerical Model and Verification

A new numerical model for the resolution of density coupled flow and transport in porous media is presented. The model is based on the mixed hybrid finite elements (MHFE) and discontinuous finite elements (DFE) methods. MHFE is used to solve the flow equation and the dispersive part of the transport equation. This method is more accurate in the calculation of velocities and ensures continuity of fluxes from one element to the adjacent one. DFE is used to solve the convective part of the transport equation. Combined with a slope limiting procedure, it avoids numerical instabilities and creates a very limited numerical dispersion, even for high grid Peclet number.Flow and transport equations are coupled by a standard iterative scheme. Residual based criterion is used to stop the iterations. Simulations of an unstable equilibrium show the effects of the criteria used to stop the iterations and the stopping criterion in the solver. The effects are more important for finer grids than for coarser grids.The numerical model is verified by the simulation of standard benchmarks: the Henry and the Elder test cases. A good agreement is found between the revised semianalytical Henry solution and the numerical solution. The Elder test case was also studied. The simulations were similar to those presented in previous works but with significantly less unknowns (i.e. coarser grids). These results show the efficiency of the used numerical schemes.     

Compact finite difference schemes on non‐uniform meshes. Application to direct numerical simulations of compressible flows

In this paper, the development of a fourth‐ (respectively third‐) order compact scheme for the approximation of first (respectively second) derivatives on non‐uniform meshes is studied. A full inclusion of metrics in the coefficients of the compact scheme is proposed, instead of methods using Jacobian transformation. In the second part, an analysis of the numerical scheme is presented. A numerical analysis of truncation errors, a Fourier analysis completed by stability calculations in terms of both semi‐ and fully discrete eigenvalue problems are presented. In those eigenvalue problems, the pure convection equation for the first derivative, and the pure diffusion equation for the second derivative are considered. The last part of this paper is dedicated to an application of the numerical method to the simulation of a compressible flow requiring variable mesh size: the direct numerical simulation of compressible turbulent channel flow. Present results are compared with both experimental and other numerical (DNS) data in the literature. The effects of compressibility and acoustic waves on the turbulent flow structure are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

MOSQUITO: An efficient finite difference scheme for numerical simulation of 2D advection

An explicit finite difference method for the treatment of the advective terms in the 2D equation of unsteady scalar transport is presented. The scheme is a conditionally stable extension to two dimensions of the popular QUICKEST scheme. It is deduced imposing the vanishing of selected components of the truncation error for the case of steady uniform flow. The method is then extended to solve the conservative form of the depth‐averaged transport equation. Details of the accuracy and stability analysis of the numerical scheme with test case results are given, together with a comparison with other existing schemes suitable for the long‐term computations needed in environmental modelling. Although with a truncation error of formal order 0(ΔxΔt, ΔyΔt, Δt²), the present scheme is shown actually to be of an accuracy comparable with schemes of third‐order in space, while requiring a smaller computational effort and/or having better stability properties. In principle, the method can be easily extended to the 3D case. Copyright © 1999 John Wiley & Sons, Ltd.     

Interface transport scheme of a two‐phase flow by the method of characteristics

In this paper, we study an interface transport scheme of a two‐phase flow of an incompressible viscous immiscible fluid. The problem is discretized by the characteristics method in time and finite elements method in space. The interface is captured by the level set function. Appropriate boundary conditions for the problem of mold filling are investigated, a new natural boundary condition under pressure effect for the transport equation is proposed, and an algorithm for computing the solution is presented. Finally, numerical experiments show and validate the effectiveness of the proposed scheme. Copyright © 2016 John Wiley & Sons, Ltd.     

非规则区域中拉普拉斯方程的有限分析5点格式

建立了非规则区域的有限分析5点格式,增加了有限分析法对不规则边界的适应性。应用所提出的方法对水利工程中常见的有压和无压流动进行了计算,与实验和前人的计算结果相比较,本文的方法都能得到较为满意的结果。本文的计算格式也可以应用到其他非规则区域的计算中。     

非定常不可压N-S方程的最小二乘算子分裂有限元法数值求解

采用最小二乘算子分裂有限元法求解非定常不可压N-S(Navier-Stokes)方程,即在每个时间层上采用算子分裂法将N-S方程分裂成扩散项和对流项,这样既能考虑对流占优特点又能顾及方程的扩散性质。扩散项是一个抛物型方程,时间离散采用向后差分格式,空间离散采用标准Galerkin有限元法。对流项的时间项采用后向差分格式,非线性部分用牛顿法进行线性化处理,再用最小二乘有限元法进行空间离散,得到对称正定的代数方程组系数矩阵。采用Re=1000的方腔流对该算法的有效性进行检验,表明其具有较高的精度,能够很好地捕捉流场中的涡结构。同时,对圆柱层流绕流进行了数值研究,通过流线图、压力场、阻力系数、升力系数及斯特劳哈数等结果的分析与对比,表明本文算法对于模拟圆柱层流绕流是准确和可靠的。     

Calculation of three‐dimensional turbulent flow with a finite volume multigrid method

A numerical method for the efficient calculation of three‐dimensional incompressible turbulent flow in curvilinear co‐ordinates is presented. The mathematical model consists of the Reynolds averaged Navier–Stokes equations and the k–ε turbulence model. The numerical method is based on the SIMPLE pressure‐correction algorithm with finite volume discretization in curvilinear co‐ordinates. To accelerate the convergence of the solution method a full approximation scheme‐full multigrid (FAS‐FMG) method is utilized. The solution of the k–ε transport equations is embedded in the multigrid iteration. The improved convergence characteristic of the multigrid method is demonstrated by means of several calculations of three‐dimensional flow cases. Copyright © 1999 John Wiley & Sons, Ltd.     

Finite analytic boundary condition for a higher‐order finite analytic scheme

A higher‐order finite analytic scheme based on one‐dimensional finite analytic solutions is used to discretize three‐dimensional equations governing turbulent incompressible free surface flow. In order to preserve the accuracy of the numerical scheme, a new, finite analytic boundary condition is proposed for an accurate numerical solution of the partial differential equation. This condition has higher‐order accuracy. Thus, the same order of accuracy is used for the boundary. Boundary conditions were formulated and derived for fluid inflow, outflow, impermeable surfaces and symmetry planes. The derived boundary conditions are treated implicitly and updated with the solution of the problem. The basic idea for the derivation of boundary conditions was to use the discretized form of the governing equations for the fluid flow simplified on the boundaries and flow information. To illustrate the influence of the higher‐order effects at the boundaries, another, lower‐order finite analytic boundary condition, is suggested. The simulations are performed to demonstrate the validity of the present scheme and boundary conditions for a Wigley hull advancing in calm water. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical solution of three‐dimensional velocity–vorticity Navier–Stokes equations by finite difference method

This paper describes the finite difference numerical procedure for solving velocity–vorticity form of the Navier–Stokes equations in three dimensions. The velocity Poisson equations are made parabolic using the false‐transient technique and are solved along with the vorticity transport equations. The parabolic velocity Poisson equations are advanced in time using the alternating direction implicit (ADI) procedure and are solved along with the continuity equation for velocities, thus ensuring a divergence‐free velocity field. The vorticity transport equations in conservative form are solved using the second‐order accurate Adams–Bashforth central difference scheme in order to assure divergence‐free vorticity field in three dimensions. The velocity and vorticity Cartesian components are discretized using a central difference scheme on a staggered grid for accuracy reasons. The application of the ADI procedure for the parabolic velocity Poisson equations along with the continuity equation results in diagonally dominant tri‐diagonal matrix equations. Thus the explicit method for the vorticity equations and the tri‐diagonal matrix algorithm for the Poisson equations combine to give a simplified numerical scheme for solving three‐dimensional problems, which otherwise requires enormous computational effort. For three‐dimensional‐driven cavity flow predictions, the present method is found to be efficient and accurate for the Reynolds number range 100?Re?2000. Copyright © 2004 John Wiley & Sons, Ltd.     

Adaptive finite elements with large aspect ratio for mass transport in electroosmosis and pressure‐driven microflows

A space–time adaptive method is presented for the numerical simulation of mass transport in electroosmotic and pressure‐driven microflows in two space dimensions. The method uses finite elements with large aspect ratio, which allows the electroosmotic flow and the mass transport to be solved accurately despite the presence of strong boundary layers. The unknowns are the external electric potential, the electrical double layer potential, the velocity field and the sample concentration. Continuous piecewise linear stabilized finite elements with large aspect ratio and the Crank–Nicolson scheme are used for the space and time discretization of the concentration equation. Numerical results are presented showing the efficiency of this approach, first in a straight channel, then in crossing and multiple T‐form configuration channels. Copyright © 2009 John Wiley & Sons, Ltd.     

Numerical modelling of shear-dependent mass transfer in large arteries

A numerical scheme for the simulation of blood flow and transport processes in large arteries is presented. Blood flow is described by the unsteady 3D incompressible Navier–Stokes equations for Newtonian fluids; solute transport is modelled by the advection–diffusion equation. The resistance of the arterial wall to transmural transport is described by a shear-dependent wall permeability model. The finite element formulation of the Navier–Stokes equations is based on an operator-splitting method and implicit time discretization. The streamline upwind/Petrov–Galerkin (SUPG) method is applied for stabilization of the advective terms in the transport equation and in the flow equations. A numerical simulation is carried out for pulsatile mass transport in a 3D arterial bend to demonstrate the influence of arterial flow patterns on wall permeability characteristics and transmural mass transfer. The main result is a substantial wall flux reduction at the inner side of the curved region. © 1997 John Wiley & Sons, Ltd.     

A finite volume solver for 1D shallow‐water equations applied to an actual river

This paper describes the numerical solution of the 1D shallow‐water equations by a finite volume scheme based on the Roe solver. In the first part, the 1D shallow‐water equations are presented. These equations model the free‐surface flows in a river. This set of equations is widely used for applications: dam‐break waves, reservoir emptying, flooding, etc. The main feature of these equations is the presence of a non‐conservative term in the momentum equation in the case of an actual river. In order to apply schemes well adapted to conservative equations, this term is split in two terms: a conservative one which is kept on the left‐hand side of the equation of momentum and the non‐conservative part is introduced as a source term on the right‐hand side. In the second section, we describe the scheme based on a Roe Solver for the homogeneous problem. Next, the numerical treatment of the source term which is the essential point of the numerical modelisation is described. The source term is split in two components: one is upwinded and the other is treated according to a centred discretization. By using this method for the discretization of the source term, one gets the right behaviour for steady flow. Finally, in the last part, the problem of validation is tackled. Most of the numerical tests have been defined for a working group about dam‐break wave simulation. A real dam‐break wave simulation will be shown. Copyright © 2002 John Wiley & Sons, Ltd.     

A finite volume Navier-Stokes algorithm for adaptive grids

A compact, finite volume, time-marching scheme for the two-dimensional Navier-Stokes equations of viscous fluid flow is presented. The scheme is designed for unstructured (locally refined) quadrilateral meshes. An earlier inviscid equation (Euler) scheme is employed for the convective terms and the emphasis is on treatment of the viscous terms. An essential feature of the algorithm is that all necessary operations are restricted to within each cell, which is very important when dealing with unstructured grids. Numerical issues which have to be addressed when developing a Navier-Stokes scheme are investigated. These issues are not limited to the particular Navier-Stokes scheme developed in the present work but are general problems. Specifically, the extent of the numerical molecule, which is related to the compactness of the scheme and to its suitability for unstructured grids, is examined. An approach which considers suppression of odd-even mode decoupling of the solution when designing a scheme is presented. In addition, accuracy issues related to grid stretching as well as boundary layer solution contamination due to artificial dissipation are addressed. Although the above issues are investigated with respect to the specific scheme presented, the conclusions are valid for an entire class of finite volume algorithms. The Navier-Stokes solver is validated through test cases which involve comparisons with analytical, numerical and experimental results. The solver is coupled to an adaptive algorithm for high-Reynolds-number aerofoil flow computations.     

Finite volume solution of the Navier–Stokes equations in velocity–vorticity formulation

For the incompressible Navier–Stokes equations, vorticity‐based formulations have many attractive features over primitive‐variable velocity–pressure formulations. However, some features interfere with the use of the numerical methods based on the vorticity formulations, one of them being the lack of a boundary conditions on vorticity. In this paper, a novel approach is presented to solve the velocity–vorticity integro‐differential formulations. The general numerical method is based on standard finite volume scheme. The velocities needed at the vertexes of each control volume are calculated by a so‐called generalized Biot–Savart formula combined with a fast summation algorithm, which makes the velocity boundary conditions implicitly satisfied by maintaining the kinematic compatibility of the velocity and vorticity fields. The well‐known fractional step approaches are used to solve the vorticity transport equation. The paper describes in detail how we accurately impose no normal‐flow and no tangential‐flow boundary conditions. We impose a no‐flux boundary condition on solid objects by the introduction of a proper amount of vorticity at wall. The diffusion term in the transport equation is treated implicitly using a conservative finite update. The diffusive fluxes of vorticity into flow domain from solid boundaries are determined by an iterative process in order to satisfy the no tangential‐flow boundary condition. As application examples, the impulsively started flows through a flat plate and a circular cylinder are computed using the method. The present results are compared with the analytical solution and other numerical results and show good agreement. Copyright © 2005 John Wiley & Sons, Ltd.     

Solution of the Navier–Stokes equations in velocity–vorticity form using a Eulerian–Lagrangian boundary element method

This paper describes the Eulerian–Lagrangian boundary element model for the solution of incompressible viscous flow problems using velocity–vorticity variables. A Eulerian–Lagrangian boundary element method (ELBEM) is proposed by the combination of the Eulerian–Lagrangian method and the boundary element method (BEM). ELBEM overcomes the limitation of the traditional BEM, which is incapable of dealing with the arbitrary velocity field in advection‐dominated flow problems. The present ELBEM model involves the solution of the vorticity transport equation for vorticity whose solenoidal vorticity components are obtained iteratively by solving velocity Poisson equations involving the velocity and vorticity components. The velocity Poisson equations are solved using a boundary integral scheme and the vorticity transport equation is solved using the ELBEM. Here the results of two‐dimensional Navier–Stokes problems with low–medium Reynolds numbers in a typical cavity flow are presented and compared with a series solution and other numerical models. The ELBEM model has been found to be feasible and satisfactory. Copyright © 2000 John Wiley & Sons, Ltd.     

Perturbation finite volume method for convective-diffusion integral equation

A perturbation finite volume (PFV) method for the convective-diffusion integral equation is developed in this paper. The PFV scheme is an upwind and mixed scheme using any higher-order interpolation and second-order integration approximations, with the least nodes similar to the standard three-point schemes, that is, the number of the nodes needed is equal to unity plus the face-number of the control volume. For instance, in the two-dimensional (2-D) case, only four nodes for the triangle grids and five nodes for the Cartesian grids are utilized, respectively. The PFV scheme is applied on a number of 1-D linear and nonlinear problems, 2-D and 3-D flow model equations. Comparing with other standard three-point schemes, the PFV scheme has much smaller numerical diffusion than the first-order upwind scheme (UDS). Its numerical accuracies are also higher than the second-order central scheme (CDS), the power-law scheme (PLS) and QUICK scheme. The project supported by the National Natural Science Foundation of China (10272106, 10372106)     

Developing a physical influence upwind scheme for pressure-based cell-centered finite volume methods

In the framework of a cell-centered finite volume method (FVM), the advection scheme plays the most important role in developing FVMs to solve complicated fluid flow problems for a wide range of Reynolds numbers. Advection schemes have been widely developed for FVMs employing pressure-velocity coupling methodology in the incompressible flow limit. In this regard, the physical influence upwind scheme (PIS) is developed for a cell-centered finite volume coupled solver (FVCS) using a pressure-weighted interpolation method for linking the pressure and velocity fields. The well-known exponential differencing scheme and skew upwind differencing scheme are also deployed in the current FVCS and their numerical results are presented. The accuracy and convergence of the present PIS are evaluated solving flow in a lid-driven square cavity, a lid-driven skewed cavity, and over a backward-facing step (BFS). The flow within the lid-driven square cavity is numerically solved at Reynolds numbers from 400 to 10 000 on a relatively coarse mesh with respect to other reported solutions. The lid-driven skewed cavity test case at Reynolds number of 1000 demonstrates the numerical performance of the present PIS on nonorthogonal grids. The flow over a BFS at Reynolds number of 800 is numerically solved to examine capabilities of current FVCS employing the current PIS in inlet-outlet flow computations. The numerical results obtained by the current PIS are in excellent agreement with those of benchmark solutions of corresponding test cases. Incorporating implicit role of pressure terms in a pressure-weighted interpolation method and development of PIS provides satisfactory solution convergence alongside the numerical accuracy for the current FVCS. A particular numerical verification is performed for the V velocity calculation within the BFS flow field, which confirms the reliability of present PIS.     

A stabilized finite element formulation for high‐speed inviscid compressible flows using finite calculus

This paper aims at the development of a new stabilization formulation based on the finite calculus (FIC) scheme for solving the Euler equations using the Galerkin FEM on unstructured triangular grids. The FIC method is based on expressing the balance of fluxes in a space–time domain of finite size. It is used to prevent the creation of instabilities typically present in numerical solutions due to the high convective terms and sharp gradients. Two stabilization terms, respectively called streamline term and transverse term, are added via the FIC formulation to the original conservative equations in the space–time domain. An explicit fourth‐order Runge–Kutta scheme is implemented to advance the solution in time. The presented numerical test examples for inviscid flows prove the ability of the proposed stabilization technique for providing appropriate solutions especially near shock waves. Although the derived methodology delivers precise results with a nearly coarse mesh, a mesh refinement technique is coupled to the solution process for obtaining a suitable mesh particularly in the high‐gradient zones. Copyright © 2014 John Wiley & Sons, Ltd.