The structural, elastic and thermodynamical properties of zinc-blend structure InN from first principles

A theoretical study of the structural, elastic and thermodynamic properties of the cubic zinc-blende (ZB) structure InN are presented in this paper by performing first principles calculations within local density approximation. The values of lattice constant, bulk modulus and its pressure derivatives and elastic constants are in excellent agreement with the available experimental data and other theoretical results. It is found that the ZB structure InN should be unstable above 20 GPa mechanically. The pressure and temperature dependencies of the bulk modulus, the heat capacity and the thermal expansion coefficient and the entropy S, as well as the Grüneisen parameter are obtained by the quasi-harmonic Debye model in the ranges of 0-1500 K and 0-25 GPa.     

Structural stability,electronic structure and mechanical properties of 4d transition metal nitrides TMN (TM=Ru,Rh, Pd)

Ab initio calculations are performed to investigate the structural stability, electronic, structural and mechanical properties of 4d transition metal nitrides TMN (TM=Ru, Rh, Pd) for five different crystal structures, namely NaCl, CsCl, zinc blende, NiAs and wurtzite. Among the considered structures, zinc blende structure is found to be the most stable one among all three nitrides at normal pressure. A structural phase transition from ZB to NiAs phase is predicted at a pressure of 104 GPa, 50.5 GPa and 56 GPa for RuN, RhN and PdN respectively. The electronic structure reveals that these nitrides are metallic. The calculated elastic constants indicate that these nitrides are mechanically stable at ambient condition.     

Structural,elastic and mechanical properties of orthorhombic SrHfO3 under pressure from first-principles calculations

Structural, elastic and mechanical properties of orthorhombic SrHfO₃ under pressure have been investigated using the plane-wave ultrasoft pseudopotential technique based on the first-principles density functional theory. The calculated equilibrium lattice parameters and elastic constants of orthorhombic SrHfO₃ at zero pressure are in good agreement with the available experimental and calculational values. The lattice parameters, total enthalpy, elastic constants and mechanical stability of orthorhombic SrHfO₃ as a function of pressure were studied. With the increasing pressure, the lattice parameters and volume of orthorhombic SrHfO₃ decrease whereas the total enthalpy increases. Orthorhombic SrHfO₃ is mechanically stable with low pressure (<52.9 GPa) whereas that is mechanically instable with high pressure (>52.9 GPa). The bulk modulus, shear modulus, Young's modulus and mechanical anisotropy of orthorhombic SrHfO₃ as a function of pressure were analyzed. It is found that orthorhombic SrHfO₃ under pressure has larger bulk modulus, better ductility and less mechanical anisotropy than orthorhombic SrHfO₃ at 0 GPa.     

First principles calculations of mechanical properties of cubic 5d transition metal monocarbides

The electronic and elastic properties of cubic 5d transition metal monocarbides in rocksalt, cesium chloride, and zinc blende structures have been studied by first principles calculations. The calculations show that the incompressibility for ReC in cesium chloride structure is even higher than that of diamond under pressure (above 89 GPa). The transformation pressure from zinc blende structure to rocksalt structure takes place at about 47 GPa for PtC. HfC-NaCl, ReC-CsCl, and HfC-ZnS have the smallest metallicity, leading to higher hardness. A valence electron number of 8/cell may be a stable valence shell configuration for 5d transition metal monocarbides in rocksalt and zinc blende structures.     

Structural, elastic and electronic properties of a new ternary-layered Ti2SiN

The structural, elastic and electronic properties of Ti₂SiN were studied by first-principle calculations. The calculated bond lengths of Ti-Si and Ti-C are 2.65 and 2.09 Å, respectively. The results show Ti₂SiN is mechanically stable, and its bulk modulus B, shear modulus G, Young's modulus E, Poisson's ratio μ and anisotropy factor A are determined to be 182 GPa, 118 GPa, 291 GPa, 0.233 and 1.57, respectively. The calculated electronic structure indicates that Ti₂SiN is anisotropic and conductive.     

Pressure-induced phase transitions in CaB6 by means of XRD and resistance measurement

High pressure behavior of CaB₆ with cubic crystal structure is investigated by means of energy dispersive X-ray diffraction and by employing in situ resistance measurement in a diamond anvil cell. Two newcome high pressure phase transitions are found with pressure ranging from ambient to 26 GPa. The first one at 12 GPa is a structural phase transition from CsCl-type structure to orthogonal structure, which is reflected by both the X-ray diffraction and the resistance variation. The other one at 3.7 GPa is suggested to be an electronic transition, which is observed only in resistance measurement. The diffraction pattern recovered while the pressure is released to 0 GPa with a pressure hysteresis over 11 GPa, which implies the reversibility of the two phase transitions. Bulk moduli of the cubic and orthogonal phases are estimated by fitting the data to a Brich-Murnaghan equation of state equal to 169.9 and 48.2 GPa, respectively.     

Structural properties and new phase transitions of ScN using FP-LMTO method

By full potential linear muffin-tin orbitals (FP-LMTO) method, we have studied the phase transitions of ScN under high pressures. The local density (LDA) approximation was used for the exchange and correlation energy density functional. The most important result is the prediction of the possibility of two phase transitions from the cubic rocksalt (NaCl) structure to the orthorhombic CaSi (Cmmc) structure above 252.5 GPa and to the tetragonal AuCu (P4/mmm) structure at 303.017 GPa, the first one (NaCl-CaSi) occurring at a lower pressure than the well known NaCl to CsCl transition (found here to be 324 GPa).     

The structural, elastic and electronic properties of BiI3: First-principles calculations

The structural, elastic and electronic properties of BiI₃ are investigated using the first-principles pseudopotential calculations within the framework of density functional theory. The calculated equilibrium structural parameters agree well with the experimental values. The results show that rhombohedral R-3 structure is low enthalpy structure at zero pressure. R-3 structure will transform into SbI₃-type structure (space group P2₁/c) at about 7.0 GPa. At zero pressure, BiI₃ with R-3 symmetry meets the mechanical stability criteria, but BiI₃ with P-31 m symmetry is an unstable one mechanically. For R-3 structure, the obtained bulk, shear, and Young’s moduli are 25.6, 15.3 and 38.3 GPa, respectively. BiI₃ presents large elastic anisotropy. Debye temperature of R-3 structure calculated is 181 K. The metallization pressure of R-3 structure is about 133 GPa and that of predicted high pressure phase P2₁/c structure is about 61 GPa, indicating BiI₃’s potential application as a nuclear radiation detector under high pressure environment.     

In situ observations of temperature- and pressure-induced phase transitions in TiH2: Angle-dispersive and synchrotron energy-dispersive X-ray diffraction studies

We investigated the behavior of the structure of titanium hydride (TiH₂), an important compound in hydrogen storage research, at elevated temperatures (0-120 °C) and high pressures (1 bar-34 GPa). Temperature-induced changes of TiH₂ as indicated in the alteration of the ambient X-ray demonstrated a cubic to tetragonal phase transition occurring at about 17 °C. The main focus of this study was to identify any pressure-induced structural transformations, including possible phase transitions, in TiH₂. Synchrotron X-ray diffraction studies were carried out in situ (diamond anvil cell) in a compression sequence up to 34 GPa and in subsequent decompression to ambient pressure. The pressure evolution of the diffraction patterns revealed a cubic (Fm-3m) to tetragonal (I4/mmm) phase transition at 2.2 GPa. The high-pressure phase persisted up to 34 GPa. After decompression to ambient conditions the observed phase transition was completely reversible. A Birch-Murnaghan fit of the unit cell volume as a function of pressure yielded a zero-pressure bulk modulus K₀=146(14) GPa, and its pressure derivative K′₀=6(1) for the high-pressure tetragonal phase of TiH₂.     

The Raman spectroscopic studies of aligned MWCNTs treated under high pressure and high temperature

The study of the aligned multiwalled carbon nanotubes (MWCNTs) for interlinking bonding under high pressures and temperatures have been conducted in the diamond anvil cell. The MWCNT samples were analyzed using the Raman spectroscopy, when treated under the combinations of pressure and temperature ranges of 2-20 GPa and 25-500 °C. The analyses show the formation of interlinking bonding at a pressure above 2.5 GPa when treated under the temperature 500 °C, based on the significant change of the relative intensity between D- and G-bands in the Raman spectra. Comparisons of the data obtained before and after the high pressure and high temperature treatments are reported. The result indicates that the aligned MWCNTs may be easier to form the interlinking bonding compared to randomly oriented MWCNTs.     

Electronic, elastic, optical properties of rutile TiO2 under pressure: A DFT study

The electronic, elastic constants and optical properties of rutile TiO₂ have been investigated using first principle pseudopotential method within generalized gradient approximation (GGA) proposed by Perdew-Burke-Ernzerhof (PBE). The calculated volume, bulk modulus and pressure derivative of bulk modulus are in good agreement with previous experimental and computational results. An underestimated band gap (1.970 eV) along with the higher density of states and expanded energy bands around the fermi level is obtained. Calculated elastic constants satisfying the Born stability criteria suggest that rutile TiO₂ is mechanically stable under higher hydrostatic pressure. The acoustic wave speeds in [1 0 0], [0 1 0], [0 0 1], [1 1 0] and [45° to [1 0 0] and [0 0 1]] directions are predicted using the investigated elastic constants. The dielectric constant is identified with respect to electronic band structure and is utilized to derive the other optical properties like refractive index, energy loss function, reflectivity and absorption. The effect of hydrostatic pressure (0-70 GPa) is described for listed properties. Our investigated results are in good accord with the existing theoretical and experimental results.     

Raman and photoluminescence spectroscopy study of benzoic acid at high pressures

Benzoic acid (C₆H₅COOH, BA) has been studied by high pressure Raman and fluorescence spectroscopy up to about 13.40 GPa using a diamond anvil cell at room temperature. The changes of lattice modes are interpreted as the crystal structure transformation. Three possible phase transitions, with the pressure increasing up to about 0.55, 3.67 and 11.10 GPa, are, respectively, elucidated as crystalline-to-crystalline, crystalline-to-amorphous transitions. A new material formed when the pressure is up to above 11.10 GPa remains stable after the pressure is released.     

First-principles calculations of structural stability and mechanical properties of tungsten carbide under high pressure

The structural stability and mechanical properties of WC in WC-, MoC- and NaCl-type structures under high pressure are investigated systematically by first-principles calculations. The calculated equilibrium lattice constants at zero pressure agree well with available experimental and theoretical results. The formation enthalpy indicates that the most stable WC is in WC-type, then MoC-type finally NaCl-type. By the elastic stability criteria, it is predicted that the three structures are all mechanically stable. The elastic constants C_ij, bulk modulus B, shear modulus G, Young?s modulus E and Poisson?s ratio ν of the three structures are studied in the pressure range from 0 to 100 GPa. Furthermore, by analyzing the B/G ratio, the brittle/ductile behavior under high pressure is assessed. Moreover, the elastic anisotropy of the three structures up to 100 GPa is also discussed in detail.     

Raman spectra for hydrogen hydrate under high pressure: Intermolecular interactions in filled ice Ic structure

Raman studies of a high-pressure structure of hydrogen hydrate, a filled ice Ic structure, were performed using a diamond anvil cell in the pressure range 3.2-44.1 GPa. The Raman spectra of a vibron revealed that extraction of hydrogen molecules from the filled ice Ic structure occurred above 20 GPa. In addition, the Raman spectra of a roton revealed that a rotation of hydrogen molecules in the filled ice Ic structure was suppressed at around 20 GPa and then the rotation recovered, and the rotation of hydrogen molecules was suppressed again above 35.5 GPa. These results indicate that intermolecular interactions increased between guest hydrogen molecules and host water molecules at around 20 and 35.5 GPa. These intermolecular interactions were considered to be induced to stabilize the filled ice Ic structure. Above 40 GPa, symmetrization of hydrogen bond was considered to contribute to the stability of hydrogen hydrate.     

Electronic structure and elastic moduli of the simple cubic fullerite C24—A new allotropic carbon modification

The energy band structure, equation of state, density of states, and elastic moduli of a new allotropic carbon modification, namely, fullerite C₂₄ with a simple cubic lattice (known previously as cubic graphite), are calculated by the full-potential linearized augmented-plane-wave (FLAPW) method with geometry optimization for the first time. The dependence of the total energy on the lattice constant exhibits a minimum for a ₀ = 0.60546 nm. In this case, the lengths of the C-C bonds between fullerene molecules, the lengths of the 6,6-bonds shared by hexagons, and the lengths of the 4,6-bonds shared by a square and a hexagon are equal to 0.1614, 0.1503, and 0.1637 nm, respectively. An analysis of the energy band structure and the density of states demonstrates that the simple cubic fullerite C₂₄ is a direct-band-gap insulator or a semiconductor with a band gap of 1.6 eV. The calculated bulk modulus B ₀ = 196 GPa and the elastic moduli C ₁₁ = 338 GPa, C ₁₂ = 139 GPa, and C ₄₄ = 30 GPa indicate that the fullerite under investigation is a mechanically stable material. The inference is made that the simple cubic fullerite C₂₄ is a new diamond-like molecular zeolite with a unique combination of properties, such as the porosity and nonpolarizability, on the one hand, and the mechanical strength, chemical inertness, and high thermal conductivity, on the other hand. The simple cubic fullerite C₂₄ can be considered a promising low-dielectric-constant (low-k) material (?₀ < 5.7) for use in fabricating interconnections and substrates intended for integrated circuits and nanoelectronics.     

First principles study of pressure induced structural phase transition in hydrogen storage material—MgH2

First principles calculation were performed using Vienna ab-initio simulation package within the frame work of density functional theory (DFT) to understand the electronic properties of magnesium hydride. At normal pressure, the most stable structure of MgH₂ is rutile type with a wide band gap of 3.52 eV, which agrees well with the available data. A pressure induced semi-conductor to metallic transition at a pressure of 92.54 GPa is predicted. Our results indicate a sequence of pressure induced structural phase transition in MgH₂. The obtained sequence of phase transition was α→γ→β→δ→ε at a pressure of 0.37 GPa, 3.89 GPa,7.23 GPa and 11.26 GPa, respectively. Thus our results indicate that MgH₂ is one of the best hydrogen storage material and the maximum storage capacity achieved was 7.7%.     

A high-pressure and high-temperature synthesis of platinum carbide

High-pressure synthesis is a powerful method for the preparation of novel materials with high elastic moduli and hardness. Additionally, such materials may exhibit interesting thermal, optoelectronic, semiconducting, magnetic, or superconducting properties. We report on the new high-pressure, high-temperature synthesis of platinum carbide. The experiments were performed in a laser-heated diamond anvil cell and data were collected using the synchrotron X-ray diffraction method at pressures >75 GPa at high-temperatures. The new platinum carbide has a rock-salt type structure, with space group Fm3m and cubic symmetry. It was confirmed to remain stable to at least 120 GPa. This structure is the same as that of other metal carbides reported in previous studies. After decompression, the new high-pressure phase was recoverable at ambient pressure. The Birch-Murnaghan equation of state for this new phase was determined from the experimental unit cell parameters, with K₀=301 (±15) GPa, and K′₀=5.2 (±0.4).     

Temperature in molybdenum at high shock pressure: Experiment and theory

Shock temperature of molybdenum is deduced to be 7853±813 K from release temperature at 374 GPa via pyrometry experiment. Theoretically, temperatures along the Hügoniot are calculated up to pressures of 500 GPa, over the shock melting pressure region, with contributions from electrons considered. At low pressures, the calculated results are consistent with NRS temperature measurements and pyrometry measurements, and accord with SESAME EOS and theoretical calculations taking the strength of the sample into account. At pressures above 100 GPa the results are much different from calculations without the contribution from the electrons, but consistent with the shock temperature deduced from experimental results in this work.     

Phase transitions at high pressure in tetracyanoethylene

We report in situ x-ray diffraction studies in tetracyanoethylene (TCNE) at high pressure using diamond anvil cell (DAC) at Elettra synchrotron source, Trieste, Italy. Experiments were performed with both the polymorphic phases (monoclinic and cubic) of TCNE as the starting phase. While starting with monoclinic (the high temperature stable) TCNE, it was found that the Bragg peaks get broadened with increase of pressure and above 5 GPa only few broad peaks remained to be observed. On release of pressure from 6.4 GPa, when the sample started turning black, the diffraction pattern at ambient pressure corresponds to cubic, the other crystalline phase of TCNE. Results reconfirm the monoclinic to cubic transition at high pressure but via an intermediate ‘disordered’ phase. This settles a number of conflicting issues. TCNE represents only system, which undergoes transition from one crystalline to another crystalline phase via a ‘disordered’ metastable phase at high pressure. When the starting phase was cubic (the low temperature stable) no apparent phase transition was observed up to 10.8 GPa.