Lamb wave band gaps in locally resonant phononic crystal strip waveguides

Using finite element method, we have made a theoretically study of the band structure of Lamb wave in a locally resonant phononic crystal strip waveguide with periodic soft rubber attached on the two sides of epoxy main plate. The numerical results show that the Lamb wave band gap based on local resonant mechanism can be opened up in the stub strip waveguides, and the width of the local resonant band gap is narrower than that based on the Bragg scattering mechanism. The results also show that the stub shape and width have influence on the frequency and width of the Lamb wave band gap.     

Investigation of a silicon-based one-dimensional phononic crystal plate via the super-cell plane wave expansion method

The super-cell plane wave expansion method is employed to calculate band structures for the design of a silicon-based one-dimensional phononic crystal plate with large absolute forbidden bands. In this method, a low impedance medium is introduced to replace the free stress boundary, which largely reduces the computational complexity. The dependence of band gaps on structural parameters is investigated in detail. To prove the validity of the super-cell plane wave expansion, the transmitted power spectra of the Lamb wave are calculated by using a finite element method. With the detailed computation, the band-gap of a one-dimensional plate can be designed as required with appropriate structural parameters, which provides a guide to the fabrication of a Lamb wave phononic crystal.     

Acoustic band pinning in the phononic crystal plates of anti-symmetric structure

Acoustic bands are studied numerically for a Lamb wave propagating in an anti-symmetric structure of a one-dimensional periodic plate by using the method of supercell plane-wave expansion. The results show that all the bands are pinned in pairs at the Brillouin zone boundary as long as the anti-symmetry remains and acoustic band gaps (ABGs) only appear between certain bands. In order to reveal the relationship between the band pinning and the anti-symmetry, the method of eigenmode analysis is introduced to calculate the displacement fields of different plate structures. Further, the method of harmony response analysis is employed to calculate the reference spectra to verify the accuracy of numerical calculations of acoustic band map, and both the locations and widths of ABGs in the acoustic band map are in good agreement with those of the reference spectra. The investigations show that the pinning effect is very sensitive to the anti-symmetry of periodic plates, and by introducing different types of breakages, more ABGs or narrow pass bands will appear, which is meaningful in band gap engineering.     

Temperature effects on the band gaps of Lamb waves in a one-dimensional phononic-crystal plate (L)

This study investigates the temperature-tuned band gaps of Lamb waves in a one-dimensional phononic-crystal plate, which is formed by alternating strips of ferroelectric ceramic Ba(0.7)Sr(0.3)TiO(3) and epoxy. The sensitive and continuous temperature-tunability of Lamb wave band gaps is demonstrated using the analyses of the band structures and the transmission spectra. The width and position of Lamb wave band gaps shift prominently with variation of temperature in the range of 26 °C-50 °C. For example, the width of the second band gap increases from 0.066 to 0.111 MHz as the temperature is increased from 26 °C to 50 °C. The strong shift promises that the structure could be suitable for temperature-tuned multi-frequency Lamb wave filters.     

Large Lamb wave band gap in phononic crystals thin plates

We suggest that Lamb wave band gaps in one-dimensional phononic crystals can be substantially enlarged by using multiple heterostructures which consist of several pieces of phononic crystal with different ratios of the thickness to the lattice period. This is possible because each substructure shows a different band gap and the band structure of a Lamb wave is strongly affected by the ratio of the plate thickness to the lattice period. This effect has been demonstrated by using finite element simulations on two different one-dimensional systems. PACS 63.20.-e; 62.65.+k; 41.20.Jb; 43.20.+g     

The band gap and transmission characteristics investigation of local resonant quaternary phononic crystals with periodic coating

In this article, the investigation of the Lamb wave propagation in two-dimensional phononic crystals (PCs) composed of an array of periodic coating on a thin plate is presented. Compared with the traditional PCs usually consist of cylindrical scatters with uniform coatings in their exterior structure, the newly exterior coating structures with periodic alternant arrangement of two different materials are proposed. The band structures are calculated using finite element method. We discover that a complete band gap can be exhibited at low frequency. Furthermore, for a finite PCs plate, the computed transmission and resonance spectra shown an evident resonance nature which can be directly related to formation of the low-frequency gaps. The effects of different material parameters and arrangement mode of coating on the acoustic energy transmission and attenuation are also studied. Finally, the experimental transmission spectrum of the periodic coating PCs are also presented and compared with the numerical results. This study will provide useful support to the design of tuning band gaps and isolators in the low-frequency range.     

Lamb waves in two-dimensional phononic crystal plate with anisotropic inclusions

An analysis is given to the band structure of the two-dimensional phononic crystal plate constituted of a square array of elastic anisotropic, circular Pb cylinders embedded in elastic isotropic epoxy. The numerical results show that the band gap can be tuned by rotating the anisotropic material orientation. It is found that the influence of anisotropy on band gap of Lamb wave is clearly different from that on the band gap of bulk waves. The thickness of the system under study is a sensitive parameter to affect the influence of anisotropic materials on the normalized gap width.     

一种多频局域共振型声子晶体板的低频带隙与减振特性

设计了一种多频局域共振型声子晶体板结构, 该结构由一薄板上附加周期性排列的多个双悬臂梁式子结构而构成. 由于多个双悬臂梁式子结构的低频振动与薄板振动的相互耦合作用, 这种局域共振型板结构可产生多个低频弯曲波带隙(禁带); 带隙频率范围内的板弯曲波会被禁止传播, 利用带隙可以实现对薄板的多个目标频率处低频减振. 本文针对这种局域共振型板结构进行了简化, 并基于平面波展开法建立了其弯曲波带隙计算理论模型; 基于该模型, 结合具体算例进行了带隙特性理论分析. 设计、制备了一种存在两个低频弯曲波带隙的局域共振型板结构样件, 通过激光扫描测振仪测试证实该结构存在两个低频带隙, 在带隙频率范围的板弯曲振动被显著衰减.     

Symmetric and Anti-Symmetric Lamb Waves in a Two-Dimensional Phononic Crystal Plate

It is weft known that Lamb waves in a plate with a mirror plane can be separated into two uncoupled sets： symmetric and anti-symmetric modes. Based on this property, we present a revised plane wave expansion method （PWE） to calculate the band structure of a phononie crystal （PC） plate with a mirror plane. The developed PWE method can be used to calculate the band structure of symmetric and anti-symmetric modes separately, by which the depending relationship between the partial acoustic band gap （PABG）, which belongs to the symmetric and anti-symmetric modes alternatively, and the position of the scatterers can be determined. As an example of its application, the band structure of the Lamb modes in a two-dimensional PC plate with two layers of void circular inclusions is investigated. The results show that the band structure for the symmetric and anti-symmetric modes can be changed by the position of the scatterers drastically, and larger PABGs will be opened when the scatterers are inserted into the area of the plate, where the elastic potential energy is concentrated.     

Analysis of Second-Harmonic Generation of Low-Frequency Dilatational Lamb Waves in a Two-Layered Composite Plate

We analyze the effect of second-harmonic generation(SHG) of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low frequency. It is found that changes in the interfacial properties essentially affect the dispersion relation and then the maximum cumulative distance of the double-frequency Lamb wave generated. This will remarkably influence the efficiency of SHG. To overcome the complications arising from the inherent dispersion and multimode natures in analyzing the SHG effect of Lamb waves, the present work focuses on the analysis of the SHG effect of low-frequency dilatational Lamb wave propagation. Both the numerical analysis and finite element simulation indicate that the SHG effect of low-frequency dilatational Lamb wave propagation is found to be much more sensitive to changes in the interfacial properties than primary Lamb waves. The potential of using the SHG effect of low-frequency dilatational Lamb waves to characterize a minor change in the interfacial properties is analyzed.     

Time reversal technique for health monitoring of metallic structure using Lamb waves

Time reversal active sensing using Lamb waves is investigated for health monitoring of a metallic structure. Experiments were conducted on an aluminum plate to study the time reversal behavior of A₀ and S₀ Lamb wave modes under narrow band and broad band pulse excitation. Damage in the form of a notch was introduced in the plate to study the changes in the characteristics of the time reversed Lamb wave modes experimentally. Time–frequency analysis of the time reversed signal was carried out to extract the damage information. A measure of damage based on wavelet transform was derived to quantify the hidden damage information in the time reversed signal. It has been shown that time reversal can be used to achieve temporal recompression of Lamb waves under broadband signal excitation. Further, the broad band excitation can also improve the resolution of the technique in detecting closely located defects. This is demonstrated by picking up the reflection of waves from the edge of the plate, from a defect close to the edge of the plate and from defects located near to each other. This study shows the effectiveness of Lamb wave time reversal for temporal recompression of dispersive Lamb waves for damage detection in health monitoring applications.     

Flexural wave suppression by an acoustic metamaterial plate

A new acoustic metamaterial plate is presented for the purpose of suppressing flexural wave propagation. The metamaterial unit cell is made of a plate with a lateral local resonance (LLR) substructure which consists of a four-link mechanism, two lateral resonators and a vertical spring. The substructure presents negative Young’s modulus property in certain frequency range. We show theoretically and numerically that two large low-frequency band gaps are obtained with different formation mechanisms. The first band gap is due to the elastic connection with the foundation while the second is induced by the lateral resonances. Besides, four-link mechanisms can transform the flexural wave into the longitudinal vibration which stimulates the lateral resonators to vibrate and to generate inertial forces for absorbing the energy and thus preventing the wave propagation. Frequency response function shows that damping from the vertical spring has little influence on the band gaps, although the damping can smooth the variation of frequency response (see the dotted line in Figs. 10 and 11). Increasing the damping of the lateral resonators may broaden the second band gap but deactivate its effect. This study provides guidance for flexibly tailoring the band characteristics of the metamaterial plate in noise and vibration controls.     

Propagation characteristics of the laser-generated lower-order lamb waves in one-dimensional periodic thin plates

Using the finite element method (FEM), we study the thermoelastic generation and the transmitted power spectra (TPS) of Laser-generated lower-order Lamb wave mode in an one-dimensional thin aluminum plate engraved by a periodic rectangular grating. The calculation verified that the equally good Lamb waves band gaps can also exist in an one-component periodic structure and the width and location of the band gaps can be regulated by the parameters of the depth of the grooves (h), the ratio of the lattice period to the plate thickness (D/L) and the ratio of the width of the grooves to the lattice period (d/D). Specially, we suggest that Lamb wave band gaps can be substantially enlarged by using multiple periodic systems which consist of several pieces of periodic structure with different D/L.     

Breaking bands degeneracy in two-dimensional hybrid triangular lattice phononic crystal: A theoretical and experimental study

Using symmetry reduction concept, the band gap properties of a two-dimensional hybrid triangular lattice phononic crystal were investigated both theoretically and experimentally. The band structure was calculated with the plane wave expansion (PWE) method. The results revealed that the band degeneracy at high symmetry point in the first Brillouin zone was lifted due to reducing symmetry, and hence a new low-frequency absolute band gap between the first and the second bands appeared. The measured transmission spectra were found to be in good agreement with the numerical results.     

二维色散和各向异性磁化等离子体光子晶体色散特性研究

采用平面波展开法和时域有限差分法研究了二维色散和各向异性磁化等离子体光子晶体的色散特性.当波矢在周期平面时,由于外加磁场的作用使TE模的色散曲线出现两个不同区域的平带,改变磁场的大小不但可以控制平带的位置,而且可以控制光子带隙的位置和大小.增大背景材料的介电常数,可以形成全方向光子带隙,随着背景材料介电常数的增加,带隙的中心位置降低但带隙宽度增加.当波矢偏离周期平面时,色散曲线不再分为TE和TM模,随着非周期平面波矢的增加,带隙位置上移,带隙宽度先增加随后基本保持不变.     

Propagation of guided elastic waves in 2D phononic crystals

The phononic band structure of two-dimensional phononic guides is numerically studied. A plane wave expansion method is used to calculate the dispersion relations of guided elastic waves in these periodic media, including 2D phononic plates and thin layered periodic arrangements. We show that, for any guided elastic wave, Lamb or generalised Lamb modes, stop bands appear in the dispersion curves, displaying a phononic band structure in both cases.     

非线性兰姆波在阶梯板中传播的有限元仿真

在非线性兰姆波检测中,累积二次谐波是重要的检测信号.该文利用有限元法仿真了非线性兰姆波在阶梯板中的产生和传播过程,通过二维离散傅里叶变换分析了兰姆波的传播模态和各个模态通过波导横截面的能流大小,给出了各个模态在阶梯板中的反射、透射系数,总结了其随阶梯板厚度的变化规律.研究发现,随着台阶增高,散射效应使得兰姆波更难入射波...     

Scattering of Lamb waves by a circular cylinder.

Following our previous attempt at the scattering from a cylinder in a slab to the incidence of a guided shear wave, we hereby discuss the scattering by an elastic cylinder embedded in an isotropic plate for a variety of bonding states to incidence of the fundamental Lamb wave modes S0 and A0 at the low-frequency regime. The plate is divided up into three regions by introducing two imaginary planes located symmetrically some distance from the cylinder and perpendicular to surfaces of the plate. The wave fields in various regions are expanded either into cylinder wave modes or into Lamb wave modes. A system of equations determining the coefficients of expansion is obtained according to the traction-free boundary conditions on the plate walls and the displacement and stress continuity conditions across the virtual planes. By taking an appropriate finite number of terms of the infinite expansion series and some selected points on the two properly chosen imaginary planes and the surfaces of the plate through convergence and precision tests, a matrix equation to numerically evaluate the expansion coefficients is found. Coefficients of the reflection and transmission versus the normalized radius of the cylinder in welded, slip, and cracked interfacial conditions are numerically computed. In the low-frequency range, the relative errors are found to be less than 1%. Contrast curves of the reflection coefficient for the cylinder of nearly all permissible size in perfect and imperfect interfacial bonding are shown and prominent differences are noted.     

The band gaps of Lamb waves in a ribbed plate: A semi-analytical calculation approach

In this paper a semi-analytical method is proposed to investigate the transmission band gaps of Lamb waves through repetitive structures in a waveguide. For a unit cell the scattering matrix is obtained by the Lamb mode matching technique at each artificially sliced interface and then substituted into the Bloch theorem to solve the eigenproblem incurred by cell repetition. The method is implemented on a ribbed plate. The band gaps in the dispersion curves are confirmed by the dips of Lamb wave transmission coefficients, and attributed to the coupled vibrations of Lamb modes in different sliced sections of the unit cell.     

Localisation of elastic waves in two-dimensional randomly disordered solid phononic crystals

Combined with the supercell technique, the plane wave expansion method is used to calculate the band structures of the two-dimensional solid–solid phononic crystals with the random disorders in either radius or location of the scatterers. Phononic systems with plumbum scatterers embedded in an epoxy matrix are calculated in detail. The influences of the disorder degree on the band structures for both anti-plane and in-plane wave modes are investigated. It is found that, with increase of the disorder degree, the band gaps become narrower with more flat bands appearing in the gaps. Both displacement distribution and response spectra show that at the flat bands, elastic waves are localised due to the presence of the disorder. Wave localisation is more pronounced at the flat bands near the lower/upper edge for the radius/location disorder. Wave propagation and localisation in a randomly disordered system with a point defect is also studied. The influence of the disorder on the point-defect state is discussed. The results show that the disorder can tune the frequencies of the defect states. It is particularly noticed that the double degenerate mode appearing within the gap of the mixed in-plane waves is split up into two separated ones when the random disorder is introduced into the system. Generally, the influence of the disorder is more pronounced for the mixed in-plane modes than the anti-plane modes. The analysis of this paper is relevant to the assessment of the influences of manufacture errors on wave behaviours in phononic crystals as well as the possible control of wave propagation by intentionally introducing disorders into periodic systems.