N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Preparation and characterization of cyclohexandiamine/Fe3O4/ZnO core/shell nanomagnetic composite as a novel reusable catalyst and its application for the diastereoselective synthesis of β‐lactams via the asymmetric Kinugasa reaction

A novel magnetic composite catalyst has been prepared by immobilizing a chiral diamine on core/shell Fe₃O₄/ZnO. This new catalyst was characterized using X‐ray diffraction, energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis and vibrating sample magnetometry. The performance of the catalyst was investigated in the asymmetric Kinugasa reaction and confirmed to be efficient in the synthesis of β‐lactam derivatives under mild conditions.     

Highly efficient oxidative cleavage of alkenes and cyanosilylation of aldehydes catalysed by magnetically recoverable MIL‐101

The catalytic activity of magnetically recoverable MIL‐101 was investigated in the oxidation of alkenes to carboxylic acids and cyanosilylation of aldehydes. MIL‐101 was treated with Fe₃O₄ and the prepared catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, N₂ adsorption measurements, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and inductively coupled plasma analysis. The catalytic active sites in this heterogeneous catalyst are Cr³⁺ nodes of the MIL‐101 framework. This heterogeneous catalyst has the advantages of excellent yields, short reaction times and reusability several times without significant decrease in its initial activity and stability in both oxidation and cyanosilylation reactions. Its magnetic property allows its easy separation using an external magnetic field.     

Encapsulation of Pd(II) into superparamagnetic nanoparticles grafted with EDTA and their catalytic activity towards reduction of nitroarenes and Suzuki–Miyaura coupling

A robust, safe and magnetically recoverable palladium catalyst was synthesized by anchoring Pd(II) onto ethylenediaminetetraacetic acid‐coated Fe₃O₄ (Fe₃O₄@EDTA) magnetic nanoparticles. The Fe₃O₄ magnetic nanoparticle‐supported Pd(II)–EDTA complex catalyst thus obtained was characterized using scanning and transmission electron microscopies, thermogravimetric analysis, vibrating sample magnetometry, X‐ray diffraction, and inductively coupled plasma atomic emission and Fourier transform infrared spectroscopies. Fe₃O₄@EDTA–Pd(II) was screened for the Suzuki reaction and reduction of nitro compounds in water. The Pd content of the catalyst was measured to be 0.28 mmol Pd g^?1. In addition, the Fe₃O₄@EDTA–Pd catalyst can be easily separated and recovered with an external permanent magnet. The anchored solid catalyst can be recycled efficiently and reused five times with only a very slight loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Design and characterization of Dendrimer of MNPs as a novel,heterogeneous and reusable nanomagnetic organometallic catalyst for one‐pot synthesis of hydroxyl naphthalene‐1,4‐dione derivatives under solvent‐free conditions

A novel super acidic magnetic nanoparticle as catalyst was successfully synthesized. The preparation of this dendrimer sulfonic acid functionalized γ‐Fe₂O₃ magnetic core‐shell silica nanoparticles as a new recoverable and heterogeneous nanocatalyst was described. The new catalyst was characterized using various techniques such as scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and thermo gravimetric synthesis (TGA). Moreover, we have examined the catalytic activity of the catalyst for one‐pot, efficient and facile synthesis of 2‐hydroxy‐1,4‐naphthoquinone derivatives via a three‐component condensation reaction of 2‐hydroxynaphthalene‐1,4‐dione, aromatic aldehydes and aniline derivatives. High yields of products, short reaction times, waste‐free, mild, ambient and solvent‐free reaction conditions are advantages of this protocol. Also, the catalyst can be easily recovered by an external magnetic and reused several times without significant loss of its catalytic activity.     

A capable cobalt nano‐catalyst for the N‐formylation of various amines and its biological activity studies

The Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs) were modified with 1,10‐phenanthroline‐5,6‐diol and the relevant Co complex (Fe₃O₄@Phendiol@Co) synthesized as a nano‐magnetic heterogeneous catalyst to be used for the N ‐formylation of various amines at room temperature under solvent‐free conditions. Also, in order to find the better concept of the catalyst role, the N ‐formylation reaction was carried out by the use of ultrasound irradiation in the absence of the Co nano‐catalyst and the results were compared. The catalyst characterized by different methods such as the elemental analysis (CHN), ICP, FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA, VSM and XPS. In addition, the antioxidant and the antibacterial activities of the Fe₃O₄@Phendiol@Co nano‐catalyst and its Phendiol ligand were in vitro screened by 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) free radical scavenging and disc diffusion methods. Results showed that they possess strong antioxidant activity (IC₅₀; 0.182 ± 0.006 mg/ml) and good antibacterial potential in comparison to standards.     

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu₂O/Casein@Fe₃O₄NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.     

Fe3O4/ZnMg(Al)O magnetic nanoparticles for efficient biodiesel production

Fe₃O₄/ZnMg(Al)O solid base catalyst was prepared by calcining ZnMgAl‐LDHs grown on the surface of magnetic Fe₃O₄ synthesized by chemical coprecipitation. The magnetic property of the catalyst was studied by vibrating sample magnetometer. The results showed that the catalyst possessed excellent magnetic responsivity, and it could be recovered by external magnetic field. The magnetic catalyst was also characterized by ICP, TG‐DTG, XRD, SEM, EDS, TEM and N₂ absorption‐desorption. It was found that the catalyst showed a unique porous structure. The reaction conditions affecting biodiesel yield were investigated, the biodiesel yield reached 94% was obtained under the optimal conditions. The biodiesel yield was still above 82% after 7 times of regeneration, and the catalyst can be easily separated and recycled.     

H3PMo12O40‐immobilized chitosan/Co3O4: A novel and recyclable nanocomposite for the synthesis of pyrimidinedione derivatives

An efficient three‐component reaction of aromatic aldehydes, 6‐aminouracil/6‐amino‐1,3‐dimethyluracil and 4‐hydroxycoumarin in the presence of a novel heterogeneous catalyst H₃PMo₁₂O₄₀‐immobilized Co₃O₄/chitosan led to a synthesis of a new class of pyrimidinedione derivatives under reflux conditions. The magnetically recoverable nanocomposite of Co₃O₄/chitosan/H₃PMo₁₂O₄₀ was fully characterized by Fourier transform‐infrared spectrophotometry, scanning electron microscopy, X‐ray powder diffraction, energy‐dispersive X‐ray spectroscopy, vibrating‐sample magnetometry and N₂ adsorption–desorption by Brunauer–Emmett–Teller analysis. Results show that Keggin‐type 12‐molybdophosphoric acid immobilized into the network of the cross‐linked chitosan with super‐paramagnetic Co₃O₄ nanoparticles. The present method offers several advantages, such as simple procedure, short reaction times and excellent yields of products. The novelty of the catalyst, high catalytic activity, easy separation from the reaction with an external magnetic field and reusability of the catalyst in six consecutive runs are additional eco‐friendly attributes of this catalytic system.     

Environmentally friendly and highly efficient synthesis of benzoxazepine and malonamide derivatives using HPA/TPI‐Fe3O4 nanoparticles as recoverable catalyst in aqueous media

A magnetic inorganic–organic nanohybrid material (HPA/TPI‐Fe₃O₄ NPs) was produced as an efficient, highly recyclable and eco‐friendly catalyst for the one‐pot multi‐component synthesis of malonamide and 2,3,4,5‐tetrahydrobenzo[b ][1,4]oxazepine derivatives with high yields in short reaction times (25–35 min) in aqueous media at room temperature. The nanohybrid catalyst was prepared by the chemical anchoring of H₆P₂W₁₈O₆₂ onto the surface of modified Fe₃O₄ nanoparticles (NPs) with N ‐[3‐(triethoxysilyl)propyl]isonicotinamide (TPI) linker. The magnetic recoverable catalyst was easily recycled at least ten times without any loss of catalytic activity.     

Suzuki–Miyaura coupling reaction in water in the presence of robust palladium immobilized on modified magnetic Fe3O4 nanoparticles as a recoverable catalyst

Aryl halides and especially inactive aryl chlorides were coupled to benzenoid aromatic rings in a Suzuki–Miyaura coupling reaction in the absence of organic solvents and toxic phosphine ligands. The reaction was catalysed by a recoverable magnetic nanocatalyst, Pd@Fe₃O₄, in aqueous media. This method is green, and the catalyst is easily removed from the reaction media using an external magnetic field and can be re‐used at least 10 times without any considerable loss in its activity. The catalyst was characterized using scanning and transmission electron microscopies, thermogravimetric analysis, inductively coupled plasma spectroscopy, Fourier transform infrared spectroscopy, CHN analysis, X‐ray diffraction and vibrating sample magnetometry.     

Green bio‐based synthesis of Fe2O3@SiO2‐IL/Ag hollow spheres and their catalytic utility for ultrasonic‐assisted synthesis of propargylamines and benzo[b]furans

A novel magnetic hybrid system containing nano‐magnetic Fe₂O₃ hollow spheres, silica shell, [pmim]Cl ionic liquid and silver nanoparticles was synthesized and characterized. The silver nanoparticles were prepared via biosynthesis using Achillea millefolium flower as reducing and stabilizing agent. The hybrid system was successfully used as an efficient and reusable catalyst for promoting green ultrasonic‐assisted A³ and KA² coupling reactions as well as benzo[b]furan synthesis. It was found that decoration of the magnetic core with non‐magnetic moieties decreased the maximum saturation magnetization. However, the catalyst was still superparamagnetic and could be simply separated from the reaction mixture using an external magnet. The heterogeneous nature of the catalyst was also confirmed by studying its reusability and stability and the leaching of silver. Use of aqueous media, high yields, short reaction times, broad substrate tolerance and low required amount of catalyst are the merits of this protocol.     

Isatin‐SO3H coated on amino propyl modified magnetic nanoparticles (Fe3O4@APTES@isatin‐SO3H) as a recyclable magnetic nanoparticle for the simple and rapid synthesis of pyrano[2,3‐d] pyrimidines derivatives

Isatin‐SO₃H coated on amino propyl modified magnetic nanoparticles (Fe₃O₄@APTES@isatin‐SO₃H) is found to be a novel, efficient, and reusable magnetic nanocatalyst, and characterized by FT‐IR, SEM, TEM, XRD, EDX, VSM, and TGA analysis. The magnetic nanocatalyst demonstrated outstanding performance in synthesis of pyrano[2,3‐d] pyrimidines derivatives via one‐pot three‐component reaction of various aromatic aldehydes 1, malononitrile 2, and barbituric acid 3 under reflux conditions in mixture of H₂O:EtOH (1:1) as solvent. Easy workup procedure, short reaction time, high yield, simple preparation and easy recovery of the catalyst, mild reaction conditions are some advantages of this work.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Fe3O4/MIL‐101(Fe) nanocomposite as an efficient and recyclable catalyst for Strecker reaction

A highly porous metal‐organic framework, MIL‐101(Fe), was prepared by a solvothermal method in the presence of amino‐modified Fe₃O₄@SiO₂ nanoparticles, in order to achieve Fe₃O₄/MIL‐101(Fe) nanocomposite, which was characterized by XRD, FT‐IR, SEM, TEM, BET, and VSM. This hybrid magnetic nanocomposite was employed as heterogeneous catalyst for α‐amino nitriles synthesis through three‐component condensation reaction of aldehydes (ketones), amines, and trimethylsilyl cyanide in EtOH, at room temperature. The recoverability and reusability was admitted for the heterogeneous magnetic catalyst; no significant reduction of catalytic activity was observed even after five consecutive reaction cycles.     

Application of 1‐methyl imidazole‐based ionic liquid‐stabilized silica‐coated Fe3O4 as a novel modified magnetic nanocatalyst for the synthesis of pyrano[2,3‐d]pyrimidines

1‐Methyl imidazole‐based ionic liquid‐stabilized silica‐coated Fe₃O₄ magnetic nanoparticles [Fe₃O₄@SiO₂@(CH₂)₃‐1‐methyl imidazole]HSO₄ as a solid acid magnetic nanocatalyst was explored in the synthesis of pyrano[2,3‐d]pyrimidine derivatives. Pyrano[2,3‐d]pyrimidine derivatives were synthesized by a highly efficient three‐component reaction of various benzaldehydes, malononitrile, and barbituric acid. The catalyst was characterized by using various analysis techniques such as Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), differential scanning calorimetry‐thermogravimetry analysis (DSC‐TGA), scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM).     

Palladium supported on modified magnetic nanoparticles: a phosphine‐free and heterogeneous catalyst for Suzuki and Stille reactions

An efficient magnetic nanoparticle‐supported palladium (Fe₃O₄/SiO₂‐PAP‐Pd) catalyst is reported for the Suzuki cross‐coupling and Stille reactions. This method provides a novel and much improved modification of the Suzuki and Stille coupling reactions in terms of phosphine‐free catalyst, short reaction time, clean reaction and small quantity of catalyst. Another important feature of this method is that the catalyst can be easily recovered from the reaction mixture and reused with no loss of its catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Iron oxide modified with pyridyl‐triazole ligand for stabilization of gold nanoparticles: An efficient heterogeneous catalyst for A3 coupling reaction in water

Fe₃O₄ nanoparticles were modified with pyridyl‐triazole ligand and the new magnetic solid was applied for the stabilization of very small and uniform gold nanoparticles. The resulting magnetic material, Fe₃O₄@PT@Au, was characterized using various methods. These gold nanoparticles on a magnetic support were applied as an efficient heterogeneous catalyst for the three‐component reaction of amines, aldehydes and alkynes (A³ coupling) in neat water with 0.01 mol% Au loading. Using magnetic separation, this catalyst could be recycled for seven consecutive runs with very small decrease in activity. Characterization of the reused catalyst did not show appreciable structural modification.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

The first urea‐based ionic liquid‐stabilized magnetic nanoparticles: an efficient catalyst for the synthesis of bis(indolyl)methanes and pyrano[2,3‐d]pyrimidinone derivatives

Urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃‐Urea‐SO₃H/HCl}, as an unexceptionable and smooth releasing urea fertilizer in alkali soils was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, atomic force microscopy and thermogravimetric analysis. The nanostructure catalyst as a novel, green and efficient catalyst was applied for the synthesis of bis(indolyl)methane derivatives via the condensation reaction between 2‐methylindole and aldehydes at room temperature under solvent‐free conditions. Also, pyrano[2,3‐d]pyrimidinone derivatives were prepared in the presence of the nanomagnetic urea‐based catalyst by the one‐pot three‐component condensation reaction of 1,3‐dimethylbarbituric acid, aldehydes and malononitrile under solvent‐free conditions at 60 °C. To the best of our knowledge, this is the first report of the synthesis of urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of task‐specific fertilizer‐based nanomagnetic ionic liquids with desirable properties as unexceptionable substances for sustainable processes. Copyright © 2016 John Wiley & Sons, Ltd.