Synthetic and antimicrobial studies on new gold(I) complexes of imidazolidin‐2‐ylidenes

Six new 1,3‐diorganylimidazolidin‐2‐ylidene (NHC) gold(I) complexes of the type [Au(NHC)₂]⁺ (1–6), were synthesized by reacting [AuCl(PPh)₃] with 1,3‐dimesitylimidazolidin‐2‐ylidene or bis(1,3‐dialkylimidazolidin‐2‐ylidene). The complexes 1–6 were fully characterized by elemental analyses and spectroscopic data. The placement of mesityl or para‐substituted benzyl groups on the nitrogen atoms of the ring of the complexes leads to the particularly active antibacterial agents evaluated in this work. It is worth noting that the p‐methoxybenzyl derivative (2) inhibited the growth of Pseudomona aeruginosa, Staphylococcus epidermidis, Staphylococcus aureus and Enterococcus faecalis with minimum inhibitory concentration (MIC) values of 3.12 µg ml^?1, 6.25 µg ml^?1, 3.12 µg ml^?1 and 3.12 µg ml^?1 respectively. In contrast, the analogous p‐dimethylaminobenzyl derivative (3) is effective only against Escherichia coli (MIC = 3.12 µg ml^?1). Copyright © 2004 John Wiley & Sons, Ltd.     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Large‐Sized Fabrication of Tunable Plasmonic Electrodes Via Electrodeposition

Electrodeposition method, a simple, cheap, and flexible approach, to fabricate gold nanoparticle (Au NPs) films with an area larger than 1 cm² on indium tin oxide (ITO) electrodes modified with (3‐mercaptopropyl) trimethoxysilane (MPTMS) was presented. Size‐controllable and high loading Au NPs were obtained, which were characterized by field‐emission scanning electron microscopic (FESEM) and UV‐vis spectroscopy. Our current method provides a versatile and facile pathway to fabricate large‐scale metal nanoparticles thin film, enhancing alternatives for academic investigation and industrial application.     

Amine‐Functionalized Polyglycidyl Methacrylate Microsphere as a Unified Template for the Synthesis of Gold Nanoparticles and Single‐Crystal Gold Plates

Polyglycidyl methacrylate (PGMA) microspheres, crosslinked and surface‐functionalized by amine, can be used as a solid‐state template for the synthesis of gold (Au) crystals in the forms of either nanoparticles (NPs) or plates. It is discovered that the polymer microsphere acts as an internal template to cultivate Au NPs inside the microsphere or an external template to generate the single‐crystal plates depending on the critical concentration (C_cr) of gold ions. The ion–dipole interaction and the structure‐dependent solubility of gold induce two distinct gold nanostructures in the presence of the functionalized polymer microspheres. The catalytic activity and long‐term storage of the developed gold nanostructures that can be easily scaled‐up for mass production through the developed novel methodology is demonstrated.     

A Flexible Nafion Coated Enzyme‐free Glucose Sensor Based on Au‐dimpled Ti Structures

The detection of glucose at low concentrations using electrochemical sensors is of great importance due to the possibility of using different human body fluids than blood, such as e. g. urine, saliva, sweat or tears. The interest behind those biofluids is related to their utility in non‐invasive sugar determination. In this work, we present flexible, fully biocompatible electrode material based on Au nanoparticles immobilized onto titanium dimples. Au?Ti heterostructures were obtained via electrochemical anodization of titanium foil in presence of fluoride anions followed by chemical etching, magnetron sputtering of gold and subsequent thermal dewetting in continuous regime. In the last step of fabrication, electrodes were modified by permselective Nafion membrane. The selection of the best electrode material among different configurations was carried out basing on the electrochemical activity in the contact with 5 mM glucose dissolved in neutral air‐saturated 0.1 M PBS. For the 10 nm Au dewetted gold film, limit of detection of 30 μM and high sensitivity of 93 mA cm^?2 mM^?1 were achieved. Application of Nafion membrane caused complete inhibition of the impact of various interference species onto the glucose detection. Good selectivity and repeatability combined with the resistance to prolonged mechanical stress suggest that prepared material can be used in non‐invasive glucose sensing.     

pH‐Switchable Redox Reactions and Bioelectrocatalytic Processes Using Au Nanoparticles‐Modified Electrodes

Boronate ester complexes generated between methylene blue (MB⁺)‐functionalized Au nanoparticles (NPs) and electrode surfaces are implemented to stimulate the bioelectrocatalyzed reduction of H₂O₂ in the presence of horseradish peroxidase (HRP). Two kinds of Au NPs are prepared: Class I includes MB⁺/phenylboronic acid as a modifying layer, whereas Class II includes MB⁺/dithiothreitol as a mixed capping layer. The Class I or II NPs form boronate ester complexes with a dithiothreitol‐ or phenylboronic acid‐functionalized Au electrodes, respectively. By the cyclic loading of the NPs on the electrodes (pH 8.1), and the removal of the NPs (pH 1.5), switchable bioelectrocatalyzed reduction of H₂O₂ is demonstrated.     

Synthesis,Stabilization, Functionalization and,DFT Calculations of Gold Nanoparticles in Fluorous Phases (PTFE and Ionic Liquids)

Gold nanoparticles (Au‐NPs) were reproducibly obtained by thermal, photolytic, or microwave‐assisted decomposition/reduction under argon from Au(CO)Cl or KAuCl₄ in the presence of n‐butylimidazol dispersed in the ionic liquids (ILs) BMIm⁺BF₄^?, BMIm⁺OTf^?, or BtMA⁺NTf₂^? (BMIm⁺=n‐butylmethylimidazolium, BtMA⁺=n‐butyltrimethylammonium, OTf^?=^?O₃SCF₃, NTf₂^?=^?N(O₂SCF₃)₂). The ultra small and uniform nanoparticles of about 1–2 nm diameter were produced in BMIm⁺BF₄^? and increased in size with the molecular volume of the ionic liquid anion used in BMIm⁺OTf^? and BtMA⁺NTf₂^?. Under argon the Au‐NP/IL dispersion is stable without any additional stabilizers or capping molecules. From the ionic liquids, the gold nanoparticles can be functionalized with organic thiol ligands, transferred, and stabilized in different polar and nonpolar organic solvents. Au‐NPs can also be brought onto and stabilized by interaction with a polytetrafluoroethylene (PTFE, Teflon) surface. Density functional theory (DFT) calculations favor interactions between IL anions instead of IL cations. This suggests a Au???F interaction and anionic Au_n stabilization in fluorine‐containing ILs. The ¹⁹F NMR signal in BMIm⁺BF₄^? shows a small Au‐NP concentration‐dependent shift. Characterization of the dispersed and deposited gold nanoparticles was done by transmission electron microscopy (TEM/HRTEM), transmission electron diffraction (TED), dynamic light scattering (DLS), UV/Vis absorbance spectroscopy, scanning electron microscopy (SEM), electron spin resonance (ESR), and electron probe micro analyses (EPM, SEM/EDX).     

On the Hopping Efficiency of Nanoparticles in the Electron Transfer across Self‐Assembled Monolayers

Redox reactions of solvated molecular species at gold‐electrode surfaces modified by electrochemically inactive self‐assembled molecular monolayers (SAMs) are found to be activated by introducing Au nanoparticles (NPs) covalently bound to the SAM to form a reactive Au–alkanedithiol–NP–molecule hybrid entity. The NP appears to relay long‐range electron transfer (ET) so that the rate of the redox reaction may be as efficient as directly on a bare Au electrode, even though the ET distance is increased by several nanometers. In this study, we have employed a fast redox reaction of surface‐confined 6‐(ferrocenyl) hexanethiol molecules and NPs of Au, Pt and Pd to address the dependence of the rate of ET through the hybrid on the particular NP metal. Cyclic voltammograms show an increasing difference in the peak‐to‐peak separation for NPs in the order Au<Pt<Pd, especially when the length of the alkanedithiol increases from octanedithiol to decanedithiol. The corresponding apparent rate constants, k_app, for decanedithiol are 1170, 360 and 14 s^?1 for NPs of Au, Pt and Pd, respectively, indicating that the efficiency of NP mediation of the ET clearly depends on the nature of the NP. Based on a preliminary analysis rooted in interfacial electrochemical ET theory, combined with a simplified two‐step view of the NP coupling to the electrode and the molecule, this observation is referred to the density of electronic states of the NPs, reflected in a broadening of the molecular electron/NP bridge group levels and energy‐gap differences between the Fermi levels of the different metals.     

Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

Exploring the interactions between gold nanoparticles and analytes through surface‐assisted laser desorption/ionization mass spectrometry

Surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS) is applied to provide strong evidence for the chemical reactions of functionalized gold nanoparticles (Au NPs) with analytes – Hg²⁺ ions induced MPA?Au NPs aggregation in the presence of 2,6‐pyridinedicarboxylic acid (PDCA) and H₂O₂ induced fluorescence quenching of 11‐MUA?Au NDs. PDCA‐Hg²⁺‐MPA coordination is responsible for Au NPs aggregation, while the formation of 11‐MUA disulfide compounds that release into the bulk solution is responsible for H₂O₂‐induced fluorescence quenching. In addition to providing information about the chemical structures, SALDI‐MS is also selective and sensitive for the detection of Hg²⁺ ions and H₂O₂. The limits of detection (LODs) for Hg²⁺ ions and H₂O₂ by SALDI‐MS were 300 nM and 250 µM, respectively. The spot‐to‐spot variations in the two studies were both less than 18% (50 sample spots). Our results reveal that SALDI‐MS can be used to study analyte‐induced changes in the surface properties of nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of antibacterial chromium iron oxide nanoparticle‐loaded activated carbon for ultrasound‐assisted wastewater treatment

The aim of this study was to evaluate the surface adsorption capacity of CrFeO₃ nanoparticle‐loaded activated carbon (CrFeO₃‐NPs–AC) for the removal of a cationic dye (methyl violet, MV). CrFeO₃‐NPs were hydrothermally synthesized and loaded on AC followed by characterization using X‐ray diffraction, field‐emission scanning electron microscopy and energy‐dispersive and Fourier transform infrared spectroscopies. The CrFeO₃‐NPs were tested for in vitro antibacterial activities against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. Minimum inhibitory and minimum bactericidal concentrations of CrFeO₃‐NPs–AC were obtained to be 50 and 100 μg ml^?1, respectively, against S. aureus and 25 and 50 μg ml^?1 against P. aeruginosa. These results indicated the antibacterial properties of CrFeO₃‐NPs–AC. To investigate the adsorption process, several systematic experiments were designed by varying parameters such as adsorbent mass, pH, initial MV concentration and sonication time. The adsorption process was modelled and the optimal conditions were determined to be 0.013 g, 7.4, 15 mg l^?1 and 8 min for adsorbent mass, pH, MV concentration and sonication time, respectively. The real experimental data were found to be efficiently explained by response surface methodology and genetic algorithm model. Kinetic studies for MV adsorption showed rapid sorption dynamics described by a second‐order kinetic model, suggesting a chemisorption mechanism. Then, the experimental equilibrium data obtained at various concentrations of MV and adsorbent masses were fitted to conventional Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models. Dye adsorption equilibrium data were fitted well to the Langmuir isotherm. From the Langmuir model, the maximum monolayer capacity was calculated to be 65.67 mg g^?1 at optimum adsorbent mass.     

“Green Electrodes” Modified with Au Nanoparticles Synthesized in Glycerol,as Electrochemical Nitrite Sensor

A new environmentally friendly Au nanoparticles (Au NPs) synthesis in glycerol by using ultraviolet irradiation and without extra‐added stabilizers is described. The synthesis proposed in this work may impact on the non‐polluting production of noble nanoparticles with simple chemicals normally found in standard laboratories. These Au NPs were used to modify a carbon paste electrode (CPE) without having to separate them from the reaction medium. This green electrode was used as an electrochemical sensor for the nitrite detection in water. At the optimum conditions the green sensor presented a linear response in the 2.0×10^?7–1.5×10^?5 M concentration range, a good detection sensitivity (0.268 A L mol^?1), and a low detection limit of 2.0×10^?7 M of nitrite. The proposed modified green CPE was used to determine nitrite in tap water samples.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]⋅n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was −67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

A Highly Sensitive Electrochemical Impedance Spectroscopy Immunosensor for Determination of 1‐Pyrenebutyric Acid Based on the Bifunctionality of Nafion/Gold Nanoparticles Composite Electrode

A simple, highly sensitive and label‐free electrochemical impedance spectroscopy (EIS) immunosensor was developed using Nafion and gold nanoparticles (nano‐Au/Nafion) composites for the determination of 1‐pyrenebutyric acid (PBA). Under the optimal conditions, the amount of immobilized antibody was significantly improved on the nano‐Au/Nafion electrode due to the synergistic effect and biocompatibility of Nafion film and gold nanoparticles composites. The results showed that the sensitivity and stability of nano‐Au/Nafion composite electrode for PBA detection were much better than those of nano‐Au modified glassy carbon electrode (nano‐Au/GCE). The plot of increased electron transfer resistances (R_ets) against the logarithm of PBA concentration is linear over the range from 0.1 to 150 ng·mL^?1 with the detection limit of 0.03 ng·mL^?1. The selectivity and accuracy of the proposed EIS immunosensor were evaluated with satisfactory results.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Reversible Synthesis of Sub‐10 nm Spherical and Icosahedral Gold Nanoparticles from a Covalent Au(CN)2− Precursor and Recycling of Cyanide to form Ferric Ferrocyanide for Cell Staining

A solution approach based on Au(CN)₂^? chemistry is reported for the formation of nanoparticles. The covalent character of the Au(CN)₂^? precursor was exploited in the formation of sub‐10 nm nanospheres (≈2.4 nm) and highly monodisperse icosahedral Au nanoparticles (≈8 nm) at room temperature in a one‐pot aqueous synthesis. The respective spherical and icosahedral Au morphologies can be controlled by either the absence or presence of the polymer polyvinylpyrrolidone (PVP). Using Au(CN)₂^? as a metal ion source, our findings suggest that the addition of citrate ions is necessary to enhance the particle formation rate as well as to generate a more homogeneous colloidal dispersion. Because of the presence of oxygen and the operation of a CN^? etching process associated with Au(CN)₂^? complex formation, an interesting reversible formation–dissolution process was observed, which allowed us to repeatedly prepare spherical and icosahedral Au nanoparticles. Time‐dependent TEM images and UV/Vis spectra were carefully acquired to study the reversibility of this formation–dissolution process. In view of the accompanying generation of toxic cyanide anions, we have developed a protocol to recycle cyanide in the presence of citrate ions through ferric ferrocyanide formation. After completion of particle formation, the residual solutions containing citrate ions and cyanide ions were processed to stain iron oxide nanoparticles endocytosized in cells. Additionally, the as‐prepared 8 nm Au icosahedra could be isolated and grown to larger 57 nm‐sized icosahedra using the seed‐mediated growth approach.     

Polyethylenimine‐assisted Synthesis of Au Nanoparticles for Efficient Syngas Production

The ability to capture, store, and use CO₂ is important for remediating greenhouse‐gas emissions and combatting global warming. Herein, Au nanoparticles (Au‐NPs) are synthesized for effective electrochemical CO₂ reduction and syngas production, using polyethylenimine (PEI) as a ligand molecule. The PEI‐assisted synthesis provides uniformly sized 3‐nm Au NPs, whereas larger irregularly shaped NPs are formed in the absence of PEI in the synthesis solution. The Au‐NPs synthesized with PEI (PEI?Au/C, average PEI Mw=2000) exhibit improved CO₂ reduction activities compared to Au‐NPs formed in the absence of PEI (bare Au NPs/C). PEI?Au/C displays a 34 % higher activity toward CO₂ reduction than bare Au NPs/C; for example, PEI?Au/C exhibits a CO partial current density (j_CO) of 28.6 mA cm^?2 at ?1.13 V_RHE, while the value for bare Au NPs/C is 21.7 mA cm^?2; the enhanced j_CO is mainly due to the larger surface area of PEI?Au/C. Furthermore, the PEI?Au/C electrode exhibits stable performance over 64 h, with an hourly current degradation rate of 0.25 %. The developed PEI?Au/C is employed in a CO₂‐reduction device coupled with an IrO₂ water‐oxidation catalyst and a proton‐conducting perfluorinated membrane to form a PEI?Au/C|Nafion|IrO₂ membrane‐electrode assembly. The device using PEI?Au/C as the CO₂‐reduction catalyst exhibits a j_CO of 4.47 mA/cm² at 2.0 V_cell. Importantly, the resulted PEI?Au/C is appropriate for efficient syngas production with a CO ratio of around 30–50 %.     

Photophysical Properties of Au‐CdTe Hybrid Nanostructures of Varying Sizes and Shapes

We design well‐defined metal‐semiconductor nanostructures using thiol‐functionalized CdTe quantum dots (QDs)/quantum rods (QRs) with bovine serum albumin (BSA) protein‐conjugated Au nanoparticles (NPs)/nanorods (NRs) in aqueous solution. The main focus of this article is to address the impacts of size and shape on the photophysical properties, including radiative and nonradiative decay processes and energy transfers, of Au‐CdTe hybrid nanostructures. The red shifting of the plasmonic band and the strong photoluminescence (PL) quenching reveal a strong interaction between plasmons and excitons in these Au‐CdTe hybrid nanostructures. The PL quenching of CdTe QDs varies from 40 to 86 % by changing the size and shape of the Au NPs. The radiative as well as the nonradiative decay rates of the CdTe QDs/QRs are found to be affected in the presence of both Au NPs and NRs. A significant change in the nonradiative decay rate from 4.72×10⁶ to 3.92×10¹⁰ s^?1 is obtained for Au NR‐conjugated CdTe QDs. It is seen that the sizes and shapes of the Au NPs have a pronounced effect on the distance‐dependent energy transfer. Such metal‐semiconductor hybrid nanostructures should have great potentials for nonlinear optical properties, photovoltaic devices, and chemical sensors.     

One Step Fabrication of Au Nanoparticles‐Ni‐Al Layered Double Hydroxide Composite Film for the Determination of L‐Cysteine

This paper reports the fabrication of Au nanoparticles (Au NPs)‐Ni‐Al layerd double hydroxide (LDH) composite film by one step electrochemical deposition on the surface of a glass carbon electrode from the mixture solution containing HAuCl₄ and nitrate salts of Ni²⁺ and Al³⁺. Improved conductivity was obtained by Au NPs codeposited on LDH film. The synergic effect of LDHs and Au NPs dramatically improves the performance of L ‐cysteine electro‐oxidation, displaying low oxidation peak potential (0.16 V) and high current response. Thus the electrode was used to sense L ‐cysteine, showing good sensitivity and selectivity.     

Colorimetric Sensing of Adenosine Based on Aptamer Binding Inducing Gold Nanoparticle Aggregation

A simple and rapid colorimetric approach for the determination of adenosine has been developed via target inducing aptamer structure switching, thus leading to Au colloidal solution aggregation. In the absence of the analytes, the aptamer/gold nanoparticle (Au NP) solution remained well dispersed under a given high ionic strength condition in that the random‐coil aptamer was readily wrapped on the surface of the Au NPs, which resulted in the enhancement of the repulsive force between the nanoparticles due to the high negative charge density of DNA molecules. While in the presence of adenosine, target‐aptamer complexes were formed and the conformation of the aptamer was changed to a folded structure which disfavored its adsorption on the Au NP surface, thus leading to the reduction of the negative charge density on each Au NP and then the reduced degree of electrostatic repulsion between Au nanoparticles. As a result, the aggregation of the Au colloidal solution occurred. The changes of the absorption spectrum could be easily monitored by a UV‐Vis spectrophotometer. A linear correlation exists between the ratio of the absorbance of the system at 522 to 700 nm (A_{522 nm}/A_{700 nm}) and the concentration of adenosine between 100 nmol·L^?1 and 10 µmol·L^?1, with a detection limit of 51.5 nmol·L^?1.