Time-resolved EPR investigation on the photoreactions of vitamin K with antioxidant vitamins in micelle systems

The photochemical reactions of vitamin K (VK) with antioxidant vitamins (vitamin E (VE) and vitamin C (VC)) in aqueous hexadecyltrimethylammonium chloride (CTAC), sodium dodecyl sulfate (SDS), and Triton X-100 micelle systems, and in an aerosol OT (AOT) reversed micelle system were investigated by a time-resolved EPR (TR-EPR). The photolysis of VK with VE in the aqueous micelle solutions gave the TR-EPR spectra having strong intensity and net emissive polarization, suggesting that the excited triplet state of VK (³VK^*) was rapidly quenched by VE coexisting inside the micelle. On the other hand, the photolysis of VK with VC in the aqueous SDS and CTAC micelle systems gave the spectra having weak intensity, showing that the reaction between ³VK^* and VC was inefficient in these micelle systems, probably because ³VK^* scarcely diffused out from the micelle. The photolysis of VK with VC in the AOT reversed micelle solution gave the spin-correlated radical pair CIDEP spectrum. The result suggests that the long-lived radical pair was generated from the reaction between ³VK^* and VC in the water/oil interface region of the AOT micelle, although one of the reactants dissolved in the oil phase and another did in the separated water phase.     

pH reversible micelle transition of a tertiary amine-based gemini surfactant in aqueous solution

In this work, we prepared a tertiary amide-based gemini surfactant (DSTAPA), which contained two pH-sensitive tertiary amide head groups. Then the molecule state distribution and self-assembly transition of the surfactant in aqueous solution were investigated under different pH conditions. The DSTAPA molecules were on the states of double cationic (DSTAPAH²⁺), single cationic (DSTAPAH⁺), and double tertiary amine groups (DSTAPA) under acidic, neutral, and basic conditions, respectively. With the variation of the molecule states, the sample was water-like below pH of 6.8 and immediately transformed to gel-like fluid between pH of 6.8 and 7.8, then changed to white precipitate with the further increase of pH value. Furthermore, the microstructure and regulation mechanism were investigated by rheological measurements, dynamic light scattering, and cryogenic transmission electron microscopy. The appearance and micelle transitions of the DSTAPA aqueous solution are actually owing to the spherical–worm-like micelle transition, leading to dramatic viscosity increase and hydrogel formation. This transition was completely reversible and repeated for at least three cycles. Finally, a reasonable mechanism of the transition was proposed based on the viewpoints of the molecular states and micelle structures. The DSTAPA aqueous system with pH-reversible property has a great potential application in oil and gas production.     

Comparison of block-copolymer with soap in micelle formation

Simple equations for the micelle formation of block-copolymers are derived from the concept of Leibler-Orland-Wheeler. The size of micelle, core, and corona are expressed in terms of chain length of block-copolymers and homopolymers and the interaction parameters of the components based on the balance between the interface energy and the strain energy of the polymer chains. These equations are extended to the soap micelle by taking the electric repulsion of soap ions into consideration. Various data on the micelle size, the solubility, the critical micelle concentration, the critical solution temperature, and the salt effect can be explained quantitatively by the theory. The solubilization ability is also discussed.     

pH responsive,reversible photo-crosslinkable micelle in layer-by-layer assembly—Study on film growth and drug delivery behavior

Layer-by-layer multilayered film has been creating great opportunities in developing controlled drug and other bioactive molecular delivery system. In this work, coumarin bearing micelles of poly(acrylic acid-coumarin methacrylate) is first synthesized in a one-step copolymerization and the reversible photo-crosslinkable multilayers containing coumarin groups are then fabricated via layering the micelles with polyethyleneimine (PEI). The film growth behavior of polyetheleneimine/poly(acrylic acid-coumarin methacrylate) (PEI/P(AA-r-CMA)) multilayer is found to rely on deposit solution pH. Increasing PEI solution pH and decreasing P(AA-r-CMA) pH can greatly accelerate film growing process. This is explained by PEI diffusivity and destabilization of P(AA-r-CMA) micelle at solution/multilayer interface. Nile red (NR) is loaded into the film as a model drug via simple post diffusion driven by hydrophobic interactions. Furthermore, photo-crosslink and decrosslink of PEI/P(AA-r-CMA) film is achieved by irradiating the films with light of 365 and 254 nm wavelength, respectively, which therefore ensures the possibility of fine control over drug delivery procedure.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

Amphiphilic polymeric micelle as pseudostationary phase in electrokinetic chromatography for analysis of eight corticosteroids in cosmetics

Amphiphilic polymeric micelle, as a novel pseudostationary phase in EKC was used to determine eight kinds of corticosteroids namely hydrocortisone, prednisolone, hydrocortisone acetate, prednisone, cortisone acetate, prednisolone acetate, dexamethasone, and triamcinolone acetonide in cosmetics. Amphiphilic random copolymer poly(methyl methacrylate‐co‐methacrylic acid) (P(MMA‐co‐MAA)) was micellizated via neutralization in alkaline aqueous solution. The influences of the molar ratio of monomer MMA to MAA, the concentration of polymer and pH on the polymeric micelle microstructure and EKC performances were investigated. As molar ratio of MMA to MAA in P(MMA‐co‐MAA) increased, both CMC and environmental polarity of the inner core in polymeric micelle decreased dramatically. With increasing monomer ratio, the size of polymeric micelles increased firstly, and then decreased, finally increased again. ζ potential of the micelle had a slight decline trend. As increment of polymer concentration, the size of the polymeric micelle increased steadily. By optimizing the monomer ratio, the polymer concentration, and pH of the running buffer, as well as operation conditions such as separation voltage and temperature, the eight analytes could be separated within 16.5 min using 7.5 mg/mL polymer with the monomer ratio of 7:3 dissolved in pH 9.2 borax buffer as the running buffer. The method has been used for analysis of corticosteroids in cosmetic samples with simple extraction; the recoveries for eight analytes were between 85.9 and 106%. This method was of accuracy, repeatability, pretreatment simplicity, and could be applied to the quality control of cosmetics.     

Experimental and theoretical investigations of the antioxidant activity of 2,2′‐methylenebis(4,6‐dialkylphenol) compounds

The antioxidant activity of two primary antioxidants, 2,2′‐methylenebis(4‐methyl‐6‐tert ‐butylphenol) (MMBPH2) and 2,2′‐methylenebis(4,6‐di‐tert ‐butylphenol) (MDBPH2), has been studied using the 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) method. The synthesized compounds have been successfully characterized systematically using elemental analyses, infrared, ¹H NMR and ¹³C NMR spectra and GC–MS. Importantly, it has been found that the compound MMBPH2 in particular is more active in DPPH radical scavenging. In addition, density functional theory calculations (B3LYP) have been used to predict the antioxidant activity and predict structural geometries of the compounds in the gas phase.     

Critical micelle concentrations for alkyltrimethylammonium bromides in water from 25 to 160°C

Critical micelle concentrations were determined by conductance measurements for decyl-, dodecyl-, tetradecyl- and hexadecyltrimethylammonium bromide in water at 25, 60, 95, 130, and 160°C. The results are discussed in terms of the equilibrium model and the nonlinear Poisson-Boltzmann model for micelle formation. The free energies of transferring a methylene group from water to the oil-like interior of the micelle are found to be –781 at 25°C, –796 at 60°C, –819 at 95°C, –815 at 130°C, and –787 at 160°C cal-mol^–1.     

Effect of pressure on the adsorption and micelle formation of aqueous dodecyltrimethylammonium chloride solution-hexane system

The interfacial tension of aqueous dodecyltrimethylammonium chloride (DTAC) solution/hexane interface has been measured as a function of pressure at concentrations around the critical micelle concentration (CMC). The derivative of the interfacial tension with respect to pressure has been observed to change abruptly at the CMC as in the case of aqueous dodecylammonium chloride (DAC) solution-hexane system studied already. The volume changes associated with the adsorption of DTAC from its monomeric and micellar states have been calculated. The results have indicated that the micelle formation of surfactant is treated like the appearance of a new macroscopic phase in the system. It has also been concluded that the micelle solubilizing hexane bears resemblance to the adsorbed film in terms of the volume. The difference in the pressure dependence of the volume of micelle formation ^MW between DTAC and DAC has been attributed to a larger polar group of DTAC. The fact that the value of ^MW is larger than that estimated from the conductivity data has been explained by the solubilization of hexane into the micelle.     

Properties of two polymerizable surfactants aqueous solutions: dodecylethylmethacrylatedimethylammonium bromide and hexadecylethylmethacrylatedimethylammonium bromide. I. Critical micelle concentration

The aggregation of two polymerisable surfactants dodecylethylmethacrylatedimethylammonium bromide (C₁₂PS) and hexadecylethylmethacrylatedimethylammonium bromide (C₁₆PS) was studied with a battery of methods. Both surfactants form premicelles at low concentration, and show a critical micelle concentration and a transition between spherical and rod-like micelles. The micelle ionization degree and the adsorption at the air/solution interface were also studied. Results are interpreted on the basis of the conformation of the polar head group.     

Effect of Molecular Interactions on Electron‐Transfer and Antioxidant Activity of Bis(alkanol)selenides: A Radiation Chemical Study

Understanding electron‐transfer processes is crucial for developing organoselenium compounds as antioxidants and anti‐inflammatory agents. To find new redox‐active selenium antioxidants, we have investigated one‐electron‐transfer reactions between hydroxyl (^.OH) radical and three bis(alkanol)selenides (SeROH) of varying alkyl chain length, using nanosecond pulse radiolysis. ^.OH radical reacts with SeROH to form radical adduct, which is converted primarily into a dimer radical cation (>Se∴Se<)⁺ and α‐{bis(hydroxyl alkyl)}‐selenomethine radical along with a minor quantity of an intramolecularly stabilized radical cation. Some of these radicals have been subsequently converted to their corresponding selenoxide, and formaldehyde. Estimated yield of these products showed alkyl chain length dependency and correlated well with their antioxidant ability. Quantum chemical calculations suggested that compounds that formed more stable (>Se∴Se<)⁺, produced higher selenoxide and lower formaldehyde. Comparing these results with those for sulfur analogues confirmed for the first time the distinctive role of selenium in making such compounds better antioxidants.     

维生素C对菲醌三重激发态的淬灭机理及动力学研究

Time-resolved electron spin resonance has been used to study quenching reactions between the antioxidant Vitamin C (VC) and the triplet excited states of 9,10-phenanthrenequinone (PAQ) in ethylene glycol-water (EG-H₂O) homogeneous and inhomogeneous reversed micelle solutions. Reversed micelle solutions were used to be the models of physiological environment of biological cell and tissue. In PAQ/EG-H₂O homogeneous solution, the excited triplet of PAQ (³PAQ*) abstracts hydrogen atom from solvent EG. In PAQ/VC/EG-H₂O solution, ³PAQ* abstracts hydrogen atom not only from solvent EG but also from VC. The quenching rate constant of ³PAQ* by VC is close to the diffusion-controlled value of 1.41×10⁸ L/(mol·s). In hexadecyltrimethylammonium bromide (CTAB)/EG-H₂O and aerosol OT (AOT)/EG-H₂O reversed micelle solutions, ³PAQ* and VC react around the water-oil interface of the reversed micelle. Exit of ³PAQ* from the lipid phase slows down the quenching reaction. For Triton X-100 (TX-100)/EG-H₂O reversed micelle solution, PAQ and VC coexist inside the hydrophilic polyethylene glycol core, and the quenching rate constant of ³PAQ* by VC is larger than those in AOT/EG-H₂O and CTAB/EG-H₂O reversed micelle solutions, even a little larger than that in EG-H₂O homogeneous solution. The strong emissive chemically in-duced dynamic electron polarization of As^- resulted from the effective TM spin polarization transfer in hydrogen abstraction of ³PAQ* from VC.     

Effects of added dotab on thecmc and enthalpy of micelle formation at 298.2 K for CTAB(aq)

In a titration calorimetric study an aqueous solution held in a syringe and containing hexadecyltrimethylammonium bromide (CTAB; 15.4×10^–3 mol dm^–3) is injected in aliquots (5×l0^–3 dm³) into a sample cell containing initially water. Analysis of the data shows that thecmc equals 0.97×l0^–3 dm^–3 and the enthalpy of micelle formation equals –10.3 kJ mol^–1. When the solution in the syringe is replaced by a mixed surfactant solution, CTAB+dodecyltrimethylammonium bromide, at the same total concentration of surfactant, thecmc of CTAB decreases gradually with increasing mole fraction of DOTAB but the enthalpy of CTAB micelle formation is hardly affected. We conclude, therefore, that incorporation of DOTAB monomers into the CTAB micelles stabilizes entropically the CTAB micelles.We thank EPSRC for their support; the Commonwealth Scholarship Commission for an award to MCSS and the Royal Society for a grant awarded to PMC for the purchase of the Titration Microcalorimeter.     

Free-energy analysis of solubilization in micelle

A statistical-mechanical treatment of the solubilization in micelle is presented in combination with molecular simulation. The micellar solution is viewed as an inhomogeneous and partially finite, mixed solvent system, and the method of energy representation is employed to evaluate the free-energy change for insertion of a solute into the micelle inside with a realistic set of potential functions. Methane, benzene, and ethylbenzene are adopted as model hydrophobic solutes to analyze the solubilization in sodium dodecyl sulfate micelle. It is shown that these solutes are more favorably located within the micelle than in bulk water and that the affinity to the micelle inside is stronger for benzene and ethylbenzene than for methane. The micellar system is then divided into the hydrophobic core, the head-group region in contact with water, and the aqueous region outside the micelle to assess the relative importance of each region in the solubilization. In support of the pseudophase model, the aqueous region is found to be unimportant to determine the extent of solubilization. The contribution from the hydrophobic-core region is shown to be dominant for benzene and ethylbenzene, while an appreciable contribution from the head-group region is observed for methane. The methodology presented is not restricted to the binding of a molecule to micelle, and will be useful in treating the binding to such nanoscale structures as protein and membrane.     

Volumetric behavior and micelle formation of aqueous surfactant mixtures

A thermodynamic treatment of the volumetric behavior of surfactant mixtures in water have been developed on the basis of the thermodynamic treatment of mixed micelle by Motomura et al. Densities of aqueous solutions of mixtures of decyltrimethylammonium bromide (DeTAB) and dodecyltrimethylammonium bromide (DTAB) have been measured as a function of total molality at constant compositions. The apparent molar volumes of the mixtures have been derived from the density data and the mean partial molar volume of monomeric surfactant mixture V _t ^w , the molar volume of mixed micelle V^M/N _t ^M , the voluem of formation of mixed micelle _W ^M V, and the composition of surfactant in the mixed micelle have been evaluated. The V _t ^W , V^M/N _t ^M , and _W ^M V have been observed to depend on the composition. The linear dependence of V _t ^W and V^M/N _t ^M on the composition indicates that the mixing of DeTAB and DTAB is ideal both in the monomeric and micellar states. This has been confirmed further by the shape of the critical micelle concentration vs. composition curves.     

Amperometric l-ascorbic acid biosensors equipped with enzyme micelle membrane

Ascorbate oxidase (ASOD) bound to polymaleimidostyrene (PMS) forms stable ASOD micelle structure in polystyrene (PS) membrane. The oxygen permeable hydrophobic ASOD micelle membrane were coated on both aminated glassy carbon electrode (AGCE) and gold electrode (AuE) for the amperometric detections of l-ascorbic acid (AsA) based on the consumption of oxygen. These AsA sensors have good sensitivities with short response time (within 1 min.). A good linear relationship was observed in the concentration range of 5 μM to 0.4 mM when AGCE was used and the applied potential was −0.5 V vs. Ag/AgCl. Interferences from the reducing agents can be avoided because the detections were conducted at cathodic potential.     

The hydrogel containing a novel vesicle‐like soft crosslinker,a “trilayered” polymeric micelle,shows characteristic rheological properties

We have developed a novel hydrogel that is formed from a crosslinkable trilayered polymeric micelle and a polyamine for the sustained release of hydrophilic compounds. This hydrogel is quite unique because the vesicle‐like structure of the trilayered polymeric micelle acts as not only a crosslinker of the hydrogel but also a container of hydrophilic compounds. The hydrogel is rapidly formed by mixing both the trilayered polymeric micelle solution and the polyamine solution. The gelation property of the hydrogel, such as the storage modulus, can be changed by tuning the molecular weights, concentrations, and pH of the dissolving solvent of the hydrogel's constituent components. Furthermore, it is clarified that the structural difference among the micelles acting as crosslinkers affects the gelation property of the hydrogel. Amazingly, the hydrogel that is formed from the trilayered polymeric micelles possessing a vesicle‐like flexible structure exhibits a higher storage modulus than the hydrogel that is formed from the bilayered polymeric micelles possessing a highly packed, hard structure. Our results demonstrates that a microscopic structural difference of crosslinkers can induce a macroscopic (and, in some cases, an interesting and unexpected) change in the properties of the resulting hydrogels. For medical applications, the hydrogel proposed in the present article can encapsulate the hydrophilic compounds so that the hydrogel can be available as the material for their sustained release. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

A CIDEP study of photolysis of duroquinone/hydrogen-donor homogeneous and triton micelle solutions

The CIDEP spectra of transient radicals during photolysis of the duroquinone (DQ)/ethylene glycol (EG) system in acid, basic, and micellar environments were measured with a home-made highly time-resolved ESR spectrometer. In the DQ/EG homogeneous solution, the enhanced emissive CIDEP signal of the neutral durosemiquinone radical DQH^• was observed. When the DQ/EG solution at pH 9 or the DQ/EG/TX-100/H₂O micelle system was photolyzed, the CIDEP signal of the duroquinone anion radical (DQ^•−) was obtained. When the DQ/EG solution at pH 2.5 was irradiated, the CIDEP signal of DQH^• appeared. These experimental results indicate that the neutral radical DQH^• was formed by proton transfer from EG to ³DQ*, and that DQ^•− was formed by dissociation of DQH^• accompanying polarization transfer.     

Supramolecular micellization and pH‐inducible gelation of a hydrophilic block copolymer by block‐specific threading of α‐cyclodextrin

A poly(ethylene glycol)‐b‐poly(L ‐lysine) diblock copolymer (PEG‐b‐PLL) was synthesized. Micellization of this hydrophilic copolymer due to the block‐specific threading of α‐cyclodextrin (α‐CD) molecules onto the polyethylene glycol (PEG) block yielded supramolecular‐structured nanoparticles, which undergoes pH‐inducible gelation in aqueous media. The pH‐inducible gelation of supramolecular micelle in water appeared to be completely reversible upon pH changes. The synergetic effect of selective complexation between PEG block and α‐CD and the pH‐inducible hydrophobic interaction between PLL blocks at pH 10 was believed to be the driving force for the formation of the supramolecular hydrogel. ¹H NMR and wide angle X‐ray diffraction (WAXD) were employed to confirm the inclusion complexation between α‐CD and PEG block. Meanwhile, the morphology of the micellized nanoparticles was investigated by transmission electron microscopy (TEM). The thermal stability of inclusion complexes (ICs) was investigated and the rheologic experiment was conducted to reveal the micelle‐gel transition. Such pH‐induced reversible micelle‐gel transition of the supramolecular aggregates may find applications in several fields, for example as advanced biomedical material possessing stimulus‐responsiveness. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 782–790, 2008     

Synthesis and antibacterial activity of novel series of 2‐(p‐tolyloxy)‐3‐(5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl)quinoline

A new series of 2‐(p‐tolyloxy)‐3‐(5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl)quinoline were synthesized from oxidative cyclization of N′‐((2‐(p‐tolyloxy)quinoline‐3‐yl)methylene)isonicotinohydrazide in DMSO/I₂ at reflux condition for 3–4 h. The structures of the new compounds were confirmed by elemental analyses as well as IR, ¹H‐NMR, and mass spectral data. All the synthesized compounds were screened for their antibacterial activities against various bacterial strains. Several of these compounds showed potential antibacterial activity. J. Heterocyclic Chem., (2011).