Effect of n-alkyl and sulfonyl groups on the wetting properties of comblike poly(oxyethylene)s and stick-slip behavior

The influence of side chain length and sulfonyl moiety on the molecular structures and wettability behavior of poly(oxyethylene)s with alkyl sulfonyl side chains (CH(3)-nSE, n = 1, 2, 3, 4, 5, 6, 8, 10), where n is the number of the carbon atom in the n-alkyl side group, was investigated. CH(3)-nSEs having shorter side chains (n < 5) do not have ordered structures, and their surfaces were found to be more polar than those of CH(3)-nSEs having longer side chains (n ≥ 5). The CH(3)-nSEs having longer side chains show double-layered lamellar structures (n ≥ 5) with well-aligned side chains and low surface energies in the range 21.2-25.8 mN/m. Interestingly, stick-slip behavior was observed only on the surfaces of CH(3)-3SE and CH(3)-4SE when water was used as the test liquid. The surface deformation at the three-phase line was generated from interactions between water and sulfonyl groups, and the optimum side chain lengths were believed to cause the stick-slip behavior.     

Measuring polymer surface ordering differences in air and water by sum frequency generation vibrational spectroscopy

Molecular structures of poly(n-butyl methacrylate) (PBMA) at the PBMA/air and PBMA/water interfaces have been studied by sum frequency generation (SFG) vibrational spectroscopy. PBMA surfaces in both air and water are dominated by the methyl groups of the ester side chains. The average orientation and orientation distribution of these methyl groups at the PBMA/air and PBMA/water interfaces are different, indicating that surface restructuring occurs when the PBMA sample contacts water. Analysis shows that the orientation distribution of side chain methyl groups on the PBMA surface is narrower in water than that in air, indicating that the PBMA surface can be more ordered in water. To our knowledge, this is the first time that quantitative comparisons between molecular surface structures of polymers in air and in water have been made. Two assumptions on the orientation distribution function, including a Gaussian distribution and a formula based on the maximum entropy approach, are used in the analysis. It has been found that the orientation angle distribution function deduced by the Gaussian distribution and the maximum entropy distribution are quite similar, showing that the Gaussian distribution is a good approximation for the angle distribution. The effect of experimental error on the deduced orientational distribution is also discussed.     

X-ray diffraction study of a polybutadiene, side chain, mesomorphic polymer

A side chain, mesomorphic polymer has been synthesized, starting from a commercial polybutadiene main chain. A preliminary X-ray diffraction study shows the influence of the degree of substitution and the spacer length on the interdigited S_A layer thickness, particularly for strongly polar alkoxycyanobiphenyl mesogens. Some hypotheses are deduced about the particular odd-even effect observed with this backbone and on the conformation of the main and side chains.     

Cis, cis-(3,5-dihydroxycyclohexyl) 3,4-bis(alkoxy)benzoates Thermal behaviour and water absorption

A homologous series of liquid crystalline cis, cis-(3,5-dihydroxycyclohexyl) 3,4-bis(alkoxy)-benzoates ('two chain' diols) is described. The formation of different mesophase structures by these compounds is influenced by the length of the alkoxy side chains; changes from smectic via cubic to hexagonal columnar mesophases have been established in a certain chain length range. The aggregation to 'supramolecular' structures via hydrogen bonding seems to be necessary for the different mesophases. Not only the behaviour of the freeze dried products, but also that of samples which had absorbed water, either from a saturated atmosphere or from direct contact, is described.     

多烷基苯磺酸钠水溶液的表面性质

研究了多烷基苯磺酸钠的结构, 特别是侧链碳原子数的增加, 对其表面活性的影响, 并与其它烷基苯磺酸钠进行了比较. 结果表明, 随着苯环上侧链碳原子数的增加, 多烷基苯磺酸钠的临界胶束浓度(cmc)降低, 但侧链上CH2降低cmc的程度远小于主链上CH2的作用. 当侧链碳原子数增加时, 多烷基苯磺酸钠的饱和吸附量(Γmax)降低, 表现出与主链不同的变化规律. 从多烷基苯磺酸钠的结构解释了cmc和Γmax的变化规律.     

Time-resolved EPR studies of main chain radicals from acrylic polymers. Effects of tacticity, solvent, and side group structure on chain stiffness

Main chain polymeric radicals from several acrylic polymers, produced by laser flash photolysis at 248 nm in liquid solution, have been studied using direct detection time-resolved electron paramagnetic resonance (TREPR) spectroscopy at 9.5 GHz. Highly isotactic poly(methyl methacrylate) (i-PMMA) shows a sharp, well-resolved spectrum at about 95 degrees C. Using synthetic methodology to disrupt the tacticity of i-PMMA, we observed different fast-motion hyperfine coupling constants for the main chain radicals. By raising the temperature of observation, we returned the coupling constants to the same value as those in the highly isotactic sample. This result is related qualitatively to the degree of stiffness of the polymer chains as a function of tacticity. The concept is tested further by comparison to two other acrylic polymers with bulky side chains: poly(fluorooctyl methacrylate) (PFOMA) and poly(adamantyl methacrylate) (PAMA), whose main chain radicals show significant line broadening even at 110 degrees C. Solvent effects on both spectral appearance (the alternating line-width effect) and kinetic decays (attributed to T1 relaxation) are also presented and discussed in terms of main chain conformational motion.     

Completely dispersible PEGylated gold nanoparticles under physiological conditions: modification of gold nanoparticles with precisely controlled PEG-b-polyamine

A novel water-soluble, biocompatible polymer, poly(ethylene glycol)-block-poly((2-N,N-dimethylamino)ethyl methacrylate) (PEG-b-PAMA), possessing controlled molecular weight with a narrow molecular weight distribution, was synthesized by the atom-transfer radical polymerization (ATRP) method. PEG-b-PAMA having a short PAMA chain length was successfully synthesized under suitable polymerization conditions. Gold nanoparticles (GNPs) were modified using PEG-b-PAMA prepared under a variety of PEGylation conditions. Under alkaline conditions (pH >10) and an [N]/[GNP] ratio of more than 3300, the PEGylated GNPs (PEG-GNPs) showed complete dispersion stability, avoiding coagulation. The amino groups of the PAMA segment of the block copolymers were completely deprotonated above pH 10. This means that PEG-b-PAMA interacted with the GNP surface via multipoint coordination of the tertiary amino groups of PAMA, not electrostatically. The effect of the number of amino groups in the PAMA segment on GNP surface modifications was investigated by zeta potential and dynamic light scattering (DLS) measurements. When the PEG-GNPs were prepared in excess polymer solution, almost the same diameter was observed regardless of the PAMA chain length. After the PEG-GNPs were purified by centrifugation, the zeta potentials of all PEG-GNPs were shielded to almost 0 mV, indicating the effective modifications of the GNP surface by PEG-b-PAMA regardless of the chain length. However, the particle size and particle size distribution of the purified PEG-GNPs were strongly affected by the PAMA chain length. PEG-GNPs with longer PAMA segments underwent coagulation after purification, whereas PEG-GNPs with shorter PAMA segments increased their dispersion stability. The experimental results of the thermal gravimetric analysis confirmed that the PEG density on the GNP surface increased as the AMA units decreased to 3. Thus, the dispersion stability depended significantly on the PEG density on the GNP surface. GNPs modified with PEG-b-PAMA having short AMA units showed excellent dispersion stability under a variety of pH conditions. The excellent dispersion stability of the obtained PEG-GNP was also confirmed both in bovine serum albumin (BSA) solution and 95% human serum.     

Self‐Assembly of Photochromic Diarylethenes with Amphiphilic Side Chains: Core‐Chain Ratio Dependence on Supramolecular Structures

Photochromic diarylethene derivatives having different lengths and numbers of poly(ethylene glycol) side chains were synthesized and their photochromic property and self‐assembling behavior were investigated. The self‐assembling behavior of the derivatives strongly depends upon the ratio between the hydrophobic core and the amphiphilic side chain. According to UV/Vis absorption spectroscopy, CD spectroscopy, and dynamic light scattering experiments, these derivatives showed different size distribution of the assembled structures and different solubility in water. The intensity of the induced CD signal, which was observed in the closed‐ring isomer, was the largest for the molecule having two hexaethylene glycol side chains. The relationship between the core‐chain ratio and regularity of the self‐assembled structure has been investigated.     

Construction by molecular dynamics modeling and simulations of the porous structures formed by dextran polymer chains attached on the surface of the pores of a base matrix: characterization of porous structures

Significant increases in the separation of bioactive molecules by using ion-exchange chromatography are realized by utilizing porous adsorbent particles in which the affinity group/ligand is linked to the base matrix of the porous particle via a polymeric extender. To study and understand the behavior of such systems, the M3B model is modified and used in molecular dynamics (MD) simulation studies to construct porous dextran layers on the surface of a base matrix, where the dextran polymer chains and the surface are covered by water. Two different porous polymer layers having 25 and 40 monomers per main polymer chain of dextran, respectively, are constructed, and their three-dimensional (3D) porous structures are characterized with respect to porosity, pore size distribution, and number of conducting pathways along the direction of net transport. It is found that the more desirable practical implications with respect to structural properties exhibited by the porous polymer layer having 40 monomers per main polymer chain, are mainly due to the higher flexibility of the polymer chains of this system, especially in the upper region of the porous structure. The characterization and analysis of the porous structures have suggested a useful definition for the physical meaning and implications of the pore connectivity of a real porous medium that is significantly different than the artificial physical meaning associated with the pore connectivity parameter employed in pore network models and whose physical limitations are discussed; furthermore, the methodology developed for the characterization of the three-dimensional structures of real porous media could be used to analyze the experimental data obtained from high-resolution noninvasive three-dimensional methods like high-resolution optical microscopy. The MD modeling and simulations methodology presented here could be used, considering that the type and size of affinity group/ligand as well as the size of the biomolecule to be adsorbed onto the affinity group/ligand are known, to construct different porous dextran layers by varying the length of the polymeric chain of dextran, the number of attachment points to the base matrix, the degree of side branching, and the number of main polymeric chains immobilized per unit surface area of base matrix. After the characterization of the porous structures of the different porous dextran layers is performed, then only a few promising structures would be selected for studying the immobilization of adsorption sites on the pore surfaces and the subsequent adsorption of the bioactive molecules onto the immobilized affinity groups/ligands.     

Functional polythiiranes 7: Surface activity of polythiiranes with PEO side chains

 Some comb-like polythiiranes with PEO side chains were prepared from the corresponding macromonomers. These new materials are amphiphiles and act as surfactants. Their surface tension and interfacial tension are measured and studied in this paper on account of their structures. The lowering of surface tension measured in polymers bearing methyl terminal group in PEO side chains, are in the same range as these observed with polymers of identical structures but different main chains. An increase of the hydrophobic units in the main chain, obtained in copolymers with methylthiirane does not significantly modified the surface tensions. Better lowering is afforded with structures bearing large alkyl groups as terminal group of PEO side chains. On the contrary, some of these macro-molecules with an optimized EO content largely lower the water/xylene surface tension. The main interest of these new materials is their very low cmc and the stabilization of L₁-type microemulsions. Received: 20 May 1997 Accepted: 25 November 1997     

Miscibility and segregated structures in mixed Langmuir monolayers

The phase behavior and morphology of segregated structures are considered for mixed Langmuir monolayers, which comprise a type of supramolecular polymer having a complex internal structure mixed with a long chain fatty acid. We fabricated two different series of mixed monolayers from a polyglutamate (PG) copolymer having 30% octadecyl ester side chains and 70% methyl ester side chains and fatty acids. These mixed monolayers deposited on a solid substrate were studied by pressure-area diagram measurements, X-ray analysis, and atomic force microscopy. Stearic acid (STA) and hexacosanoic acid (HCA) with alkyl chain lengths of 17 and 25 carbon atoms, respectively, were used as low molecular weight components. For the mixture PG:STA, where the length of the STA molecules is comparable to the length of the PG side chains, we observed the formation of partially miscible monolayers. These mixtures exhibit a nanometer scale domain morphology formed by the STA molecules dissolved in the outer shell of the PG monolayer. In contrast, for the PG:HCA mixture we observed a strong tendency for microphase separation and the formation of well-defined submicron segregated structures in the monolayers. Lateral compression of the mixed monolayers to a point close to the collapse pressure promotes microphase separation in both types of mixed monolayers with the formation of anisotropic surface morphology and oriented domains.     

Conformational Aspects and Intramolecular Phase Separation of Alternating Copolymacromonomers: A Computer Simulation Study

Summary: Using the bond fluctuation model (BFM), simulations have been performed on molecular bottle brushes with two chemically different types of side chains. In the first part of this work, rigidity of the backbone is imposed. The influence of solvent quality and side chain length on the intramolecular phase separation of side chain material, leading to Janus cylinders, has been investigated and compared to theoretical predictions. In the second part of this work, the restriction of rigidity for the backbone is relaxed. In a poor solvent, the side chain material collapses into a globular state. Several globules containing each one type of side chain material are connected together by backbone material. When imposing different solvent conditions for both types of side chains, a bending of the backbone is found as predicted by theory and observed in very recent experiments.

Comparison between typical snapshots in θ solvent. The side chain length is 25 beads. Dark and light coloured side chains repel each other.     

Gelation in free-radical terpolymerization of poly(allyl methacrylate) crosslinked polymer nanosphere with allyl benzoate and vinyl benzoate

Microgel-like poly(allyl methacrylate) (PAMA nanosphere) was prepared by the emulsion polymerization of AMA as the reactive crosslinked polymer nanosphere with abundant pendant allyl groups. The terpolymerization of PAMA nanosphere with allyl benzoate (ABz) and vinyl benzoate (VBz) was conducted in bulk using benzoyl peroxide as initiator at 80 °C. The gelation depended on the feed ABz/VBz molar ratio since the molecular weights of resulting poly(ABz-co-VBz)s that act as the bridges increased with an increase in the mole fraction of VBz in the feed monomer. Beyond the gel point, the sol was rapidly incorporated into the gel and the increasing tendency of the gel fraction became steeper from 70 to 95 mol% of VBz as a reflection of increased chain length of bridge between PAMA nanospheres. Moreover, the swelling ratio became lower with increasing the mole percentage of VBz in the feed monomer. These results would support the preferential incorporation of PAMA nanosphere into the gel and the longer bridge can capture more nanospheres to give a much shrunken gel.     

Effects of polymer chain length and stiffness on phase separation dynamics of semidilute polymer solution

Three-dimensional dissipative particle dynamics (DPD) simulations were performed to investigate the phase separation dynamics of semidilute polymer solutions with different polymer chain length and stiffness. For the polymer solution composed of shorter and more flexible chains, a crossover of the domain growth exponent from 1/3 to 2/3 was observed during the course of phase separation, indicating that the growth mechanism altered from diffusion to interfacial-tension driven flow. When the chain flexibility was kept the same but the chain was lengthened to allow for the chain entanglement to occur, the growth exponent changed to 1/4 in the diffusion-dominating coarsening regime while the growth exponent remained 2/3 in the flow-dominating regime. When the chain length was kept short but the stiffness was increased, the growth exponent became 1/6 in the diffusion-dominating regime and little effect was observed in the flow-dominating coarsening regime. The slow down of the phase separation dynamics in the diffusion-dominating coarsening could be explained by that the polymer chains could only perform wormlike movement when chain entanglements occurred or when the chain motion was limited by chain stiffness during phase separation. Moreover, when both the effects of chain length and stiffness were enhanced, polymer networks composed of longer and stiffer chains appeared and imposed an energy barrier for phase separation to occur. As a result, the polymer solution with stiffer and longer chains required a larger quench depth to initiate the phase separation and caused the delay in crossover of the coarsening mechanism from diffusion to flow.     

Vibrational spectroscopic studies on fibrinogen adsorption at polystyrene/protein solution interfaces: hydrophobic side chain and secondary structure changes

Structural changes of fibrinogen after adsorption to polystyrene (PS) were examined at the PS/protein solution interface in situ using sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). Different behaviors of hydrophobic side chains and secondary structures of adsorbed fibrinogen molecules have been observed. Our results indicate that upon adsorption, the hydrophobic PS surface induces fast structural changes of fibrinogen molecules by aligning some hydrophobic side chains in fibrinogen so that they face to the surface. Such structural changes of fibrinogen hydrophobic side chains are local changes and do not immediately induce significant changes of the protein secondary structures. Our research also shows that the interactions between adsorbed fibrinogen and the PS surface can induce significant changes of protein secondary structures or global conformations which occur on a much longer time scale.     

Influence of the chain composition on the thermodynamic properties of binary and ternary polymer solutions

Thermodynamic properties of binary and ternary polymer solutions (one or two uncharged polymers in one solvent) were studied. Poly(vinyl pyrrolidone) (PVP), fully hydrolyzed poly(vinyl alcohol) (PVA) homopolymers, and water-soluble poly(vinyl alcohol-co-vinyl acetal, -vinyl propional, and -vinyl butiral) copolymers with various acetal content and chain structure, respectively, were used in the experiments. The hydrophilic/hydrophobic character of the PVA-based macromolecules and their compatibility with the PVP homopolymer were systematically regulated by changing the chemical structure of the copolymers (acetal content and/or length of side chains). The water activities in binary and ternary solutions of the chemically different polymers were determined by a gel-deswelling method developed here for ternary solutions. On the basis of the Flory-Huggins theory, the relevant solvent-segment and segment-segment pair interaction parameters (chi) have been calculated. The chi12 segment-solvent interaction parameters proved to be sensitive indicators for changes in the chemical structure of the copolymers. With increase of either the acetal content or the length of side chains in the copolymer, chi12 approached the value characteristic of a theta condition. No significant differences could be revealed in the segment-segment interaction parameters obtained for the PVP-copolymer mixtures with various acetal derivatives, when the chi12 and chi13 interaction parameters determined in binary solutions were used in the calculations for chi23. Determination of the parameters chi1,23 as suggested by Panayiotou, however, showed that increasing the acetal content or the length of the hydrophobic side chains in the copolymer resulted in a reduction in the interaction between the PVA "acetals" and PVP molecules.     

Probing polymer/polymer interfaces

Infrared-visible sum frequency generation spectroscopy (SFG) has been used to study the interface between poly(vinyl-N-octadecylcarbamate-co-vinyl acetate) (Comb) and deuterated or hydrogenated polystyrene (dPS or hPS) films. Strong methyl symmetric and Fermi resonance bands associated with the alkyl side chains of the Comb polymer are observed in the SFG spectra. In addition, for Comb/hPS spectra, symmetric and asymmetric vibration modes of phenyl groups are observed. The presence of asymmetric modes indicates the phenyl rings are tilted with respect to the interface normal.     

Effects of polar group saturation on physical gelation of amphiphilic polymer solutions

Monte Carlo simulation on the basis of the comblike coarse grained nonpolar/polar (NP) model has been carried out to study the polar group saturation effect on physical gelation of amphiphilic polymer solutions. The effects of polar group saturation due to hydrogen bonding or ion bridging on the sol-gel phase diagram, microstructure of aggregates, and chain conformation of amphiphilic polymer solutions under four different solvent conditions to either the nonpolar backbone or the polar side chain in amphiphilic polymer chains have been investigated. It is found that an increase of polar group saturation results in a monotonically decreased critical concentration of gelation point, which can be qualitatively supported by the dynamic rheological measurements on pectin aqueous solutions. Furthermore, various solvent conditions to either the backbone or the side chain have significant impact on both chain conformation and microstructure of aggregates. When the solvent is repulsive to the nonpolar backbone but attractive to the polar side chain, the polymer chains are collapsed, and the gelation follows the mechanism of colloidal packing; at the other solvent conditions, the gelation follows the mechanism of random aggregation.     

Solvent response of mixed polymer brushes

We have performed classical density functional theory calculations to study the behavior of mixed polymer brushes tethered to a planar surface. We assume no lateral segregation of the polymer at the grafting density studied and consider an implicit solvent. For a binary mixture of short and long athermal polymer chains, the short chain is compressed while the long chain is stretched compared with corresponding pure polymer chains at the same grafting density, which is consistent with simulation. This results from configurational entropy effects. Furthermore, we add a mean-field interaction for each polymer brush to simulate their different response towards a solvent. The long chain is forced to dislike the solvent more than the short chain. Through the interplay between the solvent effects and configurational entropy effects, a switch of the polymer brush surface (or outer) layer is found with increasing chain length of the long chain. The transition chain length (long chain) increases with increasing the solvent selectivity, and decreases with increasing the grafting density of the long chain. These results can provide guidance for the design of smart materials based on mixed polymer brushes.     

Stoichiometric polyelectrolyte complexes as comb copolymers

The collapse behavior of a single comblike copolymer chain has been studied by Monte Carlo simulations. It has been supposed that the solvent is good for the side chains but the solvent quality for the backbone chain changes. It has been shown that depending on the structural parameters of the comb copolymer (the lengths of the backbone and side chains, grafting density of the side chains) various thermodynamically stable morphologies of the collapsed backbone chain can be realized. In addition to ordinary spherical globule we have observed elongated structures as well as necklace-like conformations. The proposed model can be used to describe conformational behavior of stoichiometric complexes between block copolymers with a polyelectrolyte short block and oppositely charged linear homopolymers.