GM1 clustering inhibits cholera toxin binding in supported phospholipid membranes

The present studies explore multivalent ligand-receptor interactions between pentameric cholera toxin B subunits (CTB) and the corresponding membrane ligand, ganglioside GM1. CTB binding was monitored on supported phospholipid bilayers coated on the walls and floors of microfluidic channels. Measurements were made by total internal reflection fluorescence microscopy (TIRFM). Apparent dissociation constants were extracted by fitting the binding data to both the Hill-Waud and Langmuir adsorption isotherm equations. Studies of the effect of ligand density on multivalent CTB-GM1 interactions revealed that binding weakened with increasing GM1 density from 0.02 mol % to 10.0 mol %. Such a result could be explained by the clustering of GM1 on the supported phospholipid membranes, which in turn inhibited the binding of CTB. Atomic force microscopy (AFM) experiments directly verified GM1 clustering within the supported POPC bilayers.     

Glycopolymers Mimicking GM1 Gangliosides: Cooperativity of Galactose and Neuraminic Acid for Cholera Toxin Recognition

Glycopolymers mimicking GM1 gangliosides were synthesized by incorporating multiple types of carbohydrates into the polymer backbone. The glycopolymers were immobilized onto gold surfaces, and the interactions with the cholera toxin B subunit (CTB) were analyzed using surface plasmon resonance imaging. The glycopolymer containing both galactose and neuraminic acid showed enhanced recognition of CTB. The interaction was enhanced mainly because of an improvement in the dissociation process by the binding of the neuraminic acid group in the GM1 binding pocket. This cooperativity of galactose and neuraminic acid was achieved by incorporation into the same flexible polymer backbone, and the importance of the close placement of galactose and neuraminic acid groups was revealed. These results will be valuable in medical fields and also for the development of biofunctional materials.     

Affinity capillary electrophoresis for the assessment of binding affinity of carbohydrate‐based cholera toxin inhibitors

Developing tools for the study of protein carbohydrate interactions is an important goal in glycobiology. Cholera toxin inhibition is an interesting target in this context, as its inhibition may help to fight against cholera. For the study of novel ligands an affinity capillary electrophoresis (ACE) method was optimized and applied. The method uses unlabeled cholera toxin B‐subunit (CTB) and unlabeled carbohydrate ligands based on ganglioside GM1‐oligosaccharides (GM1os). In an optimized method at pH 4, adsorption of the protein to the capillary walls was prevented by a polybrene‐dextran sulfate‐polybrene coating. Different concentrations of the ligands were added to the BGE. CTB binding was observed by a mobility shift that could be used for dissociation constant (K_d) determination. The K_d values of two GM1 derivatives differed by close to an order of magnitude (600 ± 20 nM and 90 ± 50 nM) which was in good agreement with the differences in their reported nanomolar IC₅₀ values of an ELISA‐type assay. Moreover, the selectivity of GM1os towards CTB was demonstrated using Influenza hemagglutinin (H5) as a binding competitor. The developed method can be an important platform for preclinical development of drugs targeting pathogen‐induced secretory diarrhea.     

Atomic force microscopy study of cellulose surface interaction controlled by cellulose binding domains

Colloidal probe microscopy has been used to study the interaction between model cellulose surfaces and the role of cellulose binding domain (CBD), peptides specifically binding to cellulose, in interfacial interaction of cellulose surfaces modified with CBDs. The interaction between pure cellulose surfaces in aqueous electrolyte solution is dominated by double layer repulsive forces with the range and magnitude of the net force dependent on electrolyte concentration. AFM imaging reveals agglomeration of CBD adsorbed on cellulose surface. Despite an increase in surface charge owing to CBD binding to cellulose surface, force profiles are less repulsive for interactions involving, at least, one modified surface. Such changes are attributed to irregularity of the topography of protein surface and non-uniform distribution of surface charges on the surface of modified cellulose. Binding double CBD hybrid protein to cellulose surfaces causes adhesive forces at retraction, whereas separation curves obtained with cellulose modified with single CBD show small adhesion only at high ionic strength. This is possibly caused by the formation of the cross-links between cellulose surfaces in the case of double CBD.     

Direct measurement of hydrophobic particle–bubble interactions in aqueous solutions by atomic force microscopy: Effect of particle hydrophobicity

Direct measurements of the interaction forces between a spherical silica particle and a small air bubble have been conducted in aqueous electrolyte solutions by using an atomic force microscope (AFM). The silica particle was hydrophobized with a silanating reagent, and the interaction forces were measured by using several particles with different surface hydrophobicities. In the measured force curves, a repulsive force was observed at large separation distances as the particle moved towards the bubble. The origin of the repulsive force was attributed to an electrostatic double-layer force because both the particle and bubble were negatively charged. After the repulsive force, an extremely long-range attractive force acted between the surfaces. These results indicate that the intervening thin water film between the particle and bubble rapidly collapsed, resulting in the particle penetrating the bubble.

The instability of the thin water film between the surfaces suggests the existence of an additional attractive force. By comparing the repulsive forces of the obtained force curves with the DLVO theory, the rupture thickness was estimated. The hydrophobicity of the particle did not significantly change the rupture thickness, whereas the pH of the solution is considered to be a critical factor.     

Analysis of transmembrane dynamics of cholera toxin using photoreactive probes.

Using sodium dodecyl sulfate--polyacrylamide gel electrophoresis and autoradiography, we have shown that 125I-labeled cholera toxin binds to Newcastle disease virus. Pretreatment of Newcastle disease virus with "cold" cholera toxin (at 37 degrees C for 30 minutes) inhibits the binding of 125I-labeled toxin in a subsequent incubation (at 37 degrees C for 30 minutes). These results suggest that cholera toxin binds to Newcastle disease virus in a specific manner. The precise receptor for toxin is unknown in Newcastle disease virus but it is presumed to be the ganglioside GM1. We have previously shown that the photoreactive probe 12-(4-azido-2-nitrophenoxy)stearoylglucosamine[1-14C] labels the membrane proteins of Newcastle disease virus. Since the reactive group of the probe, ie, N3, resides within the membrane bilayer, studies were initiated to determined which, if any, of the subunits of cholera toxin cross the membrane of Newcastle disease virus and become radioactively labeled upon photoactivation of the probe at 360 nm. After a 15-minute incubation of cholera toxin with Newcastle disease virus containing the photoreactive probe, irradiation effected the 14C-labeling of the active A1 subunit of cholera toxin. Irradiation of cholera toxin in solution with an equivalent amount of probe but without virus resulted in no labeling of toxin subunits.     

Membrane properties of mixed ganglioside GM1/phosphatidylcholine monolayers

The interaction between ganglioside G_M1 (GM1) and --dipalmitoylphosphatidylcholine (DPPC) in mixed monolayers was investigated using surface pressure measurements and atomic force microscopy (AFM), and the effects of GM1, surface pressure and temperature on the properties of the membranes were examined. Mixed GM1/DPPC monolayers were deposited on mica using the Langmuir–Blodgett (LB) technique for AFM. GM1 and DPPC were miscible below the 0.2 mole fraction of GM1 and there was attractive interaction between GM1 and DPPC. The AFM images for the GM1/DPPC monolayers (X_GM1 < 0.2) at 30 mN m⁻¹ and 25 °C indicated a percolation pattern which means a micro phase separation: namely, the mixed film composed of GM1 and DPPC phase-separated from the DPPC liquid-condensed film. The AFM images for the mixed monolayers at 33 mN m⁻¹ indicated a specific morphology when the surface pressure was varied from 30 to 40 mN m⁻¹. The percolation pattern in the AFM image at 25 °C came to be destroyed with increasing temperature and completely disappeared at 45 °C. The change in the morphology of mixed GM1/DPPC monolayers on varying the surface pressure and temperature is thought to be related to signal transduction and a preventive mechanism against viral infections in the human body.     

Exploring Multi-Subsite Binding Pockets in Proteins: DEEP-STD NMR Fingerprinting and Molecular Dynamics Unveil a Cryptic Subsite at the GM1 Binding Pocket of Cholera Toxin B

Ligand-based NMR techniques to study protein–ligand interactions are potent tools in drug design. Saturation transfer difference (STD) NMR spectroscopy stands out as one of the most versatile techniques, allowing screening of fragments libraries and providing structural information on binding modes. Recently, it has been shown that a multi-frequency STD NMR approach, differential epitope mapping (DEEP)-STD NMR, can provide additional information on the orientation of small ligands within the binding pocket. Here, the approach is extended to a so-called DEEP-STD NMR fingerprinting technique to explore the binding subsites of cholera toxin subunit B (CTB). To that aim, the synthesis of a set of new ligands is presented, which have been subject to a thorough study of their interactions with CTB by weak affinity chromatography (WAC) and NMR spectroscopy. Remarkably, the combination of DEEP-STD NMR fingerprinting and Hamiltonian replica exchange molecular dynamics has proved to be an excellent approach to explore the geometry, flexibility, and ligand occupancy of multi-subsite binding pockets. In the particular case of CTB, it allowed the existence of a hitherto unknown binding subsite adjacent to the GM1 binding pocket to be revealed, paving the way to the design of novel leads for inhibition of this relevant toxin.     

Protein heterodimerization through ligand-bridged multivalent pre-organization: enhancing ligand binding toward both protein targets

Structure-based design of a bifunctional ligand for two protein pentamers, cholera toxin B pentamer (CTB) and human serum amyloid P component (SAP), leads to multivalent dimerization of CTB and SAP in solution. This multivalent heterodimerization of proteins significantly enhances the affinity of the bifunctional ligand toward both target proteins.     

A model system to study the insertion of cholesterol into a phospholipid monolayer

Colloidal probe atomic force microscopy (AFM) was used to study the interaction between a surface bearing tethered cholesterol groups and an egg phosphatidylcholine (egg-PC) monolayer. The cholesterol bearing surface was comprised of a mixed self-assembled monolayer comprised of O-cholesteryl N-(8'-mecapto-3',6'-dioxaoctyl)carbamate (CPEO3) molecules and beta-mercaptoethanol formed on a 20 mum diameter gold-coated silica particle. The egg-PC monolayer was adsorbed onto an octadecylthiol monolayer formed on template-stripped gold. The force between the surfaces, as a function of separation, was measured for surface concentrations of CPEO3 from 0 to 100 mol %. At all concentrations there was a long-range repulsive double-layer force due to weak surface charges. At surface concentrations of CPEO3 from 1 to 29 mol % the interaction on the approach of the surfaces showed a maximum in the repulsive force, followed by a small (2-5 nm) jump into a force minimum corresponding to adhesion of the surfaces. On separation, a normalized pull-off force of 1.0-1.6 mN m(-1) was measured. Over the same concentration range, the calculated interaction energy per CPEO3 molecule decreased from 1.1 +/- 0.2 kT to 0.04 kT. At surface concentrations of 35 mol % and above there was no reproducible adhesion between the cholesterol-bearing surface and the phospholipid monolayer. We attribute the occurrence of short-range attraction and adhesion in the 1-29 mol % regime to the insertion of (some) cholesterol groups into the phospholipid monolayer. At higher surface concentrations the efficiency of insertion is reduced due to steric effects. We discuss the experimental results in the light of the energetics of the insertion of a cholesterol molecule into a lipid bilayer.     

Adhesion of spherical polyelectrolyte brushes on mica: an in situ AFM investigation

We demonstrate that the adsorption of cationic spherical polyelectrolyte brushes (SPB) on negatively charged mica substrates can be controlled in situ by the ionic strength of the suspension. The SPB used in our experiments consist of colloidal core particles made of polystyrene. Long cationic polyelectrolyte chains are grafted onto these cores that have diameters in the range of 100 nm. These particles are suspended in aqueous solution with a fixed ionic strength. Atomic force microscopy (AFM) in suspension as well as in air was used for surface characterization. In pure water the polymer particles exhibit a strong adhesion to the mica surface. AFM investigations of the dry samples show that the particles occupy the identical positions as they did in liquid. They were not removed by the capillary forces within the receding water front during the drying process. The strong interaction between the particles and the mica surface is corroborated by testing the adhesion of individual particles on the dried surface by means of the AFM tip: after a stepwise increase of the force applied to the surface by the AFM tip, the polymer particles still were not removed from the surface, but they were cut through and remained on the substrate. Moreover, in situ AFM measurements showed that particles which adsorb under liquid in a stable manner are easily desorbed from the surface after electrolyte is added to the suspension. This finding is explained by a decreasing attractive particle-substrate interaction, and the removal of the particles from the surface is due to the significant reduction of the activation barrier of the particle desorption. All findings can be explained in terms of the counterion release force.     

Microscopic origin of the humidity dependence of the adhesion force in atomic force microscopy

Water condenses between an atomic force microscope (AFM) tip and a surface to form a nanoscale bridge that produces a significant adhesion force on the tip. As humidity increases, the water bridge always becomes wider but the adhesion force sometimes decreases. The authors show that the humidity dependence of the adhesion force is intimately related to the structural properties of the underlying water bridge. A wide bridge whose width does not vary much with tip-surface distance can increase its volume as distance is increased. In this case, the adhesion force decreases as humidity rises. Narrow bridges whose width decreases rapidly with increasing tip-surface distance give the opposite result. This connection between humidity dependence of the adhesion force and the structural susceptibility of the water bridge is illustrated by performing Monte Carlo simulations for AFM tips with various hydrophilicities.     

Intramolecular carbohydrate-aromatic interactions and intermolecular van der Waals interactions enhance the molecular recognition ability of GM1 glycomimetics for cholera toxin

The design and synthesis of two GM1 glycomimetics, 6 and 7, and analysis of their conformation in the free state and when complexed to cholera toxin is described. These compounds, which include an (R)-cyclohexyllactic acid and an (R)-phenyllactic acid fragment, respectively, display significant affinity for cholera toxin. A detailed NMR spectroscopy study of the toxin/glycomimetic complexes, assisted by molecular modeling techniques, has allowed their interactions with the toxin to be explained at the atomic level. It is shown that intramolecular van der Waals and CH-pi carbohydrate-aromatic interactions define the conformational properties of 7, which adopts a three-dimensional structure significantly preorganized for proper interaction with the toxin. The exploitation of this kind of sugar-aromatic interaction, which is very well described in the context of carbohydrate/protein complexes, may open new avenues for the rational design of sugar mimics.     

Probing the validity of the Derjaguin approximation for heterogeneous colloidal particles

The Derjaguin approximation states that the interaction force between two curved surfaces is proportional to their effective radius, whereby the inverse effective radius is the arithmetic mean of the inverse curvature radii of the surfaces involved. The present study investigates the validity of this approximation with an atomic force microscope (AFM) by measuring interaction forces between colloidal particles of different sizes, but of identical composition. Forces were measured between silica particles of 2.0, 4.8 and 6.8 microm in diameter in KCl electrolyte solution with and without adsorbed poly(amido amine) (PAMAM) dendrimers. The Derjaguin approximation could be confirmed at all distances investigated, including those comparable with the characteristic length scales of the surface roughness or the surface charge heterogeneities. For the conditions investigated, the Derjaguin approximation turns out to be surprisingly robust.     

Adsorption of ions onto polymer surfaces and its influence on zeta potential and adhesion phenomena

 The adhesion behavior that governs many technologically and biologically relevant polymer properties can be investigated by zeta potential measurements with varied electrolyte concentration or pH. In a previous work [1] it was found that the difference of the adsorption free energies of Cl^- and K⁺ ions correlates with the adhesion force caused by van der Waals interactions, and that the decrease of adhesion strength by adsorption layers can be elucidated by zeta potential measurements. In order to confirm these interrelations, zeta potential measurements were combined with atomic force microscopy (AFM) measurements. Force–distance curves between poly(ether ether ketone) and fluorpolymers, respectively, and the Si₃N₄ tip of the AFM device in different electrolyte solutions were measured and analysed. The adsorption free energy of anions calculated from the Stern model correlates with their ability to prevent the adhesion between the polymer surface and the Si₃N₄ tip of the AFM device. These results demonstrate the influence of adsorption phenomena on the adhesion behavior of solids. The results obtained by AFM confirm the thesis that the electrical double layer of solid polymers in electrolyte solutions is governed by ion adsorption probably due to van der Waals interactions and that therefore van der Waals forces can be detected by zeta potential measurements. Received: 18 November 1997 Accepted: 19 January 1998     

Interaction between dissimilar double layers with like signs under charge regulation on the basis of the Gouy-Chapman-Stern-Grahame model

The force of interaction between two flat double layers with dissimilar surface potentials but of the same signs, in contact with 1-1 electrolyte solutions (0.001, 0.01, and 0.1 M), was calculated as a function of the surface separation. The calculation was carried out on the basis of the Gouy-Chapman-Stern-Grahame double-layer model, incorporating the site-dissociation and site-binding model used previously for many oxide studies. The results demonstrated that the interaction force under surface charge regulation was always repulsive, increasing progressively with decreasing surface separation. This result is in contrast to the predictions of previous theories that are based on the Gouy-Chapman (GC) double-layer model. Dependence of surface potentials and surface charge densities on the surface separation is also presented.     

Synthesis,Biological Evaluation,WAC and NMR Studies of S‐Galactosides and Non‐Carbohydrate Ligands of Cholera Toxin Based on Polyhydroxyalkylfuroate Moieties

The synthesis of several non‐carbohydrate ligands of cholera toxin based on polyhydroxyalkylfuroate moieties is reported. Some of them have been linked to D ‐galactose through a stable and well‐tolerated S‐glycosidic bond. They represent a novel type of non‐hydrolyzable bidentate ligand featuring galactose and polyhydroxyalkylfuroic esters as pharmacophoric residues, thus mimicking the GM1 ganglioside. The affinity of the new compounds towards cholera toxin was measured by weak affinity chromatography (WAC). The interaction of the best candidates with this toxin was also studied by saturation transfer difference NMR experiments, which allowed identification of the binding epitopes of the ligands interacting with the protein. Interestingly, the highest affinity was shown by non‐carbohydrate mimics based on a polyhydroxyalkylfuroic ester structure.     

Residence time, loading force, pH, and ionic strength affect adhesion forces between colloids and biopolymer-coated surfaces

Exopolymers are thought to influence bacterial adhesion to surfaces, but the time-dependent nature of molecular-scale interactions of biopolymers with a surface are poorly understood. In this study, the adhesion forces between two proteins and a polysaccharide [Bovine serum albumin (BSA), lysozyme, or dextran] and colloids (uncoated or BSA-coated carboxylated latex microspheres) were analyzed using colloid probe atomic force microscopy (AFM). Increasing the residence time of an uncoated or BSA-coated microsphere on a surface consistently increased the adhesion force measured during retraction of the colloid from the surface, demonstrating the important contribution of polymer rearrangement to increased adhesion force. Increasing the force applied on the colloid (loading force) also increased the adhesion force. For example, at a lower loading force of approximately 0.6 nN there was little adhesion (less than -0.47 nN) measured between a microsphere and the BSA surface for an exposure time up to 10 s. Increasing the loading force to 5.4 nN increased the adhesion force to -4.1 nN for an uncoated microsphere to a BSA surface and to as much as -7.5 nN for a BSA-coated microsphere to a BSA-coated glass surface for a residence time of 10 s. Adhesion forces between colloids and biopolymer surfaces decreased inversely with pH over a pH range of 4.5-10.6, suggesting that hydrogen bonding and a reduction of electrostatic repulsion were dominant mechanisms of adhesion in lower pH solutions. Larger adhesion forces were observed at low (1 mM) versus high ionic strength (100 mM), consistent with previous AFM findings. These results show the importance of polymers for colloid adhesion to surfaces by demonstrating that adhesion forces increase with applied force and detention time, and that changes in the adhesion forces reflect changes in solution chemistry.     

Colloidal forces between bitumen surfaces in aqueous solutions measured with atomic force microscope

Colloidal forces between bitumen surfaces in aqueous solutions were measured with an atomic force microscope (AFM). The results showed a significant impact of solution pH, salinity, calcium and montmorillonite clay addition on both long-range (non-contact) and adhesion (pull-off) forces. Weaker long-range repulsive forces were observed under conditions of lower solution pH, higher salinity and higher calcium concentration. Lower solution pH, salinity and calcium concentration resulted in a stronger adhesion forces. The addition of montmorillonite clays increased long-range repulsive forces and decreased adhesion forces, particularly when co-added with calcium ions. The measured force profiles were fitted with extended DLVO theory to show the repulsive electrostatic double layer and attractive hydrophobic forces being the dominant components in the long-range forces between the bitumen surfaces. At a very short separation distance (less than 4–6 nm), a strong repulsion of steric origin was observed. The findings provide a fundamental understanding of bitumen emulsion stability and a mechanism of bitumen “aeration” in bitumen recovery processes from oil sands.