Titanium local structure in tektite probed by X‐ray absorption fine structure spectroscopy

The local structure of titanium in tektites from six strewn fields was studied by Ti K‐edge X‐ray absorption near edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS) in order to provide quantitative data on Ti—O distance and Ti coordination number. The titanium in tektites possessed different coordination environment types. XANES spectra patterns revealed resemblance to high‐temperature TiO₂–SiO₂ glass and TiO₂ anatase. All samples showed that the valence of Ti is 4+. Based on the Ti—O distances, coordination numbers and radial distribution function determined by EXAFS analyses, the tektites were classified into three types: type I, Ti occupies a four‐coordinated tetrahedral site with Ti—O distances of 1.84–1.79 Å; type II, Ti occupies a five‐coordinated trigonal bipyramidal or tetragonal pyramidal site with Ti—O distances of 1.92–1.89 Å; type III, Ti occupies a six‐coordinated octahedral site with Ti—O distances of 2.00–1.96 Å. Although Ti occupies the TiO₆ octahedral site in most titanium minerals under ambient conditions, some tektites have four‐ and five‐coordinated Ti. This study indicated that the local structure of Ti might change in impact events and the following stages.     

Sound velocities of compressed Fe3C from simultaneous synchrotron X‐ray diffraction and nuclear resonant scattering measurements

The applications of nuclear resonant scattering in laser‐heated diamond anvil cells have provided an important probe for the magnetic and vibrational properties of ⁵⁷Fe‐bearing materials under high pressure and high temperature. Synchrotron X‐ray diffraction is one of the most powerful tools for studying phase stability and equation of state over a wide range of pressure and temperature conditions. Recently an experimental capability has been developed for simultaneous nuclear resonant scattering and X‐ray diffraction measurements using synchrotron radiation. Here the application of this method to determine the sound velocities of compressed Fe₃C is shown. The X‐ray diffraction measurements allow detection of microscale impurities, phase transitions and chemical reactions upon compression or heating. They also provide information on sample pressure, grain size distribution and unit cell volume. By combining the Debye velocity extracted from the nuclear resonant inelastic X‐ray scattering measurements and the structure, density and elasticity data from the X‐ray diffraction measurements simultaneously obtained, more accurate sound velocity data can be derived. Our results on few‐crystal and powder samples indicate strong anisotropy in the sound velocities of Fe₃C under ambient conditions.     

Propagation of an X‐ray beam modified by a photonic crystal

A method of calculating the transmission of hard X‐ray radiation through a perfect and well oriented photonic crystal and the propagation of the X‐ray beam modified by a photonic crystal in free space is developed. The method is based on the approximate solution of the paraxial equation at short distances, from which the recurrent formula for X‐ray propagation at longer distances is derived. A computer program for numerical simulation of images of photonic crystals at distances just beyond the crystal up to several millimetres was created. Calculations were performed for Ni inverted photonic crystals with the [111] axis of the face‐centred‐cubic structure for distances up to 0.4 mm with a step size of 4 µm. Since the transverse periods of the X‐ray wave modulation are of several hundred nanometres, the intensity distribution of such a wave is changed significantly over the distance of several micrometres. This effect is investigated for the first time.     

Local structure of NiAl compounds investigated by extended X‐ray absorption fine‐structure spectroscopy

The local structures of pure NiAl and Ti‐, Co‐doped NiAl compounds have been obtained utilizing extended X‐ray absorption fine‐structure (EXAFS) spectroscopy. The results provide experimental evidence that Ni antisite defects exist in the Ni‐rich NiAl compounds. The site preference of Ti and Co has been confirmed. Ti occupies the Al sublattice, while Co occupies the Ni sublattice. The structure parameters obtained by EXAFS were consistent with the X‐ray diffraction results. Owing to the precipitation of α‐Cr, the local structure of NiAl‐Cr has not been obtained, making the site preference of Cr unclear.     

X‐ray absorption spectroscopy analysis of Ru in La2RuO5

The compound La₂RuO₅ was examined by the x‐ray absorption spectroscopy (XAS) methods, x‐ray absorption near edge structure (XANES) and extended x‐ray absorption fine structure (EXAFS). XANES technique was used to probe directly the average valence of Ru atoms in the compound. The energy shift of the Ru K‐edge in the XANES signal gave the average Ru valence state as 4.0 ± 0.1. EXAFS analysis provided, by yielding directly the interatomic distances and coordination numbers, the first information on the Ru atom neighborhood, on which the model for the Rietveld refinement of the unit cell of the new compound was devised. Finally, the local structure around the Ru atoms from the refinement was used in the FEFF6 code for a model EXAFS spectrum. The very good quantitative agreement with the measured spectrum proves that the refined crystal structure contains no systematic defects in the vicinity of Ru atoms. This result, together with the valence obtained from XANES, strongly confirms the proposed La₂RuO₅ stoichiometry. Copyright © 2007 John Wiley & Sons, Ltd.     

X‐ray magnetic spectroscopy at high pressure: performance of SPring‐8 BL39XU

An X‐ray magnetic circular dichroism experiment under multiple extreme conditions, 2 ≤T≤ 300 K, H≤ 10 T and P≤ 50 GPa, has been achieved at SPring‐8 BL39XU. A combination of the high‐brilliant X‐ray beam and a helicity‐controlled technique enabled the dichroic signal to be recorded with high accuracy. The performance is shown by the outcome of pressure‐induced ferromagnetism in Mn₃GaC and the pressure‐suppressed Co moment in ErCo₂. Two technical developments, a tiny diamond anvil cell inserted into a superconducting magnet and in situ pressure calibration using 90° Bragg diffraction from a NaCl marker, are also presented. X‐ray magnetic spectroscopy under multiple extreme conditions is now opening a new approach to materials science.     

Trifluoromethanesulfonamide: X‐ray single‐crystal determination and quantum chemical calculations

The X‐ray single‐crystal structure of 1,1,1‐trifluoromethanesulfonamide (triflamide) CF₃SO₂NH₂, which is the ancestor of a large family of its derivatives, has been determined. The crystal structure is composed of infinite layers with an interlayer distance of 3.4 Å. Geometry optimization at the Møller‐Plesset (MP2) and density functional theory (DFT) level showed the calculated bond distances to be, as a rule, longer than the experimental ones. A trial to simulate crystal packing effect on the geometrical parameters by calculating the dimer of triflamide in the gas phase failed – the starting X‐ray geometry of the ‘dimeric’ unit with one NH···O=S H‐bond – was optimized to the cyclic dimer with two H‐bonds. However, when the external (crystal) field effect was simulated using the polarizable continuum model, the experimental geometry of the ‘dimeric’ fragment was satisfactorily reproduced. Calculations of the heptamer cluster having the structure of the hexagon with six triflamide molecules in vertices and one in the middle nicely reproduce the X‐ray structure and brings the geometrical parameters closer to the experiment. Copyright © 2015 John Wiley & Sons, Ltd.     

Momentum‐resolved resonant inelastic X‐ray scattering on a single crystal under high pressure

A single‐crystal momentum‐resolved resonant inelastic X‐ray scattering (RIXS) experiment under high pressure using an originally designed diamond anvil cell (DAC) is reported. The diamond‐in/diamond‐out geometry was adopted with both the incident and scattered beams passing through a 1 mm‐thick diamond. This enabled us to cover wide momentum space keeping the scattering angle condition near 90°. Elastic and inelastic scattering from the diamond was drastically reduced using a pinhole placed after the DAC. Measurement of the momentum‐resolved RIXS spectra of Sr_2.5Ca_11.5Cu₂₄O₄₁ at the Cu K‐edge was thus successful. Though the inelastic intensity becomes weaker by two orders than the ambient pressure, RIXS spectra both at the center and the edge of the Brillouin zone were obtained at 3 GPa and low‐energy electronic excitations of the cuprate were found to change with pressure.     

In situ X‐ray absorption spectroscopic studies of copper in a copper‐rich sludge during electrokinetic treatments

Speciation of copper in a copper‐rich chemical‐mechanical polishing sludge during electrokinetic treatment has been studied by in situ extended X‐ray absorption fine structure (EXAFS) and X‐ray absorption near‐edge structure (XANES) spectroscopy. The least‐squares‐fitted XANES spectra indicate that the main copper species in the sludge are Cu(OH)₂ (74%), nanosize CuO (20–60 nm) (13%) and CuO (>100 nm) (13%). The average bond distance and coordination number (CN) of Cu—O are 1.96 Å and 3.5, respectively. Under electrokinetic treatment (5 V cm^?1) for 120 min, about 85% of the copper is dissolved in the electrolyte, 13% of which is migrated and enriched on the cathode. Notably the copper nanoparticles in the sludge can also migrate to the cathode under the electric field. By in situ EXAFS, it is found that during the electrokinetic treatment the bond distance and CN of Cu—O are increased by 0.1 Å and 0.9, respectively.     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

An X‐ray Raman spectrometer for EXAFS studies on minerals: bent Laue spectrometer with 20 keV X‐rays

An X‐ray Raman spectrometer for studies of local structures in minerals is discussed. Contrary to widely adopted back‐scattering spectrometers using ≤10 keV X‐rays, a spectrometer utilizing ～20 keV X‐rays and a bent Laue analyzer is proposed. The 20 keV photons penetrate mineral samples much more deeply than 10 keV photons, so that high intensity is obtained owing to an enhancement of the scattering volume. Furthermore, a bent Laue analyzer provides a wide band‐pass and a high reflectivity, leading to a much enhanced integrated intensity. A prototype spectrometer has been constructed and performance tests carried out. The oxygen K‐edge in SiO₂ glass and crystal (α‐quartz) has been measured with energy resolutions of 4 eV (EXAFS mode) and 1.3 eV (XANES mode). Unlike methods previously adopted, it is proposed to determine the pre‐edge curve based on a theoretical Compton profile and a Monte Carlo multiple‐scattering simulation before extracting EXAFS features. It is shown that the obtained EXAFS features are reproduced fairly well by a cluster model with a minimal set of fitting parameters. The spectrometer and the data processing proposed here are readily applicable to high‐pressure studies.     

Sapphire hard X‐ray Fabry–Perot resonators for synchrotron experiments

Hard X‐ray Fabry–Perot resonators (FPRs) made from sapphire crystals were constructed and characterized. The FPRs consisted of two crystal plates, part of a monolithic crystal structure of Al₂O₃, acting as a pair of mirrors, for the backward reflection (0 0 0 30) of hard X‐rays at 14.3147 keV. The dimensional accuracy during manufacturing and the defect density in the crystal in relation to the resonance efficiency of sapphire FPRs were analyzed from a theoretical standpoint based on X‐ray cavity resonance and measurements using scanning electron microscopic and X‐ray topographic techniques for crystal defects. Well defined resonance spectra of sapphire FPRs were successfully obtained, and were comparable with the theoretical predictions.     

X‐ray‐excited optical luminescence and X‐ray absorption fine‐structures studies of CdWO4 scintillator

X‐ray‐excited optical luminescence (XEOL) emission and excitation spectra as well as the EXAFS signal of CdWO₄ were measured in the energy region of the Cd and W absorption edges. From EXAFS refinement, structural parameters such as number of atoms, distance from the absorbing atom and width of coordination shells in the W neighborhood were determined. The role of W–O interactions on the intrinsic luminescence of CdWO₄ is discussed. The efficiencies of conversion, transfer and emission processes involved in the scintillation mechanism showed to be high when self‐trapped excitons are formed locally by direct excitation of W ions. Annihilation of these excitons provides the characteristic scintillation of CdWO₄, a broad band emission with maximum at 500 nm. The presence of two energetically different O positions in the lattice gives rise to the composite structure of the luminescence band, and no influence of extrinsic defects was noticed. A mismatch between the X‐ray absorption coefficient and the zero‐order luminescence curves corroborates that the direct excitation of Cd ions induces secondary electronic excitations not very effective in transferring energy to the luminescent group, WO₆.     

Alternative difference analysis scheme combining R‐space EXAFS fit with global optimization XANES fit for X‐ray transient absorption spectroscopy

Time‐resolved X‐ray absorption spectroscopy (TR‐XAS), based on the laser‐pump/X‐ray‐probe method, is powerful in capturing the change of the geometrical and electronic structure of the absorbing atom upon excitation. TR‐XAS data analysis is generally performed on the laser‐on minus laser‐off difference spectrum. Here, a new analysis scheme is presented for the TR‐XAS difference fitting in both the extended X‐ray absorption fine‐structure (EXAFS) and the X‐ray absorption near‐edge structure (XANES) regions. R‐space EXAFS difference fitting could quickly provide the main quantitative structure change of the first shell. The XANES fitting part introduces a global non‐derivative optimization algorithm and optimizes the local structure change in a flexible way where both the core XAS calculation package and the search method in the fitting shell are changeable. The scheme was applied to the TR‐XAS difference analysis of Fe(phen)₃ spin crossover complex and yielded reliable distance change and excitation population.     

The materials science X‐ray beamline BL8 at the DELTA storage ring

The hard X‐ray beamline BL8 at the superconducting asymmetric wiggler at the 1.5 GeV Dortmund Electron Accelerator DELTA is described. This beamline is dedicated to X‐ray studies in the spectral range from ～1 keV to ～25 keV photon energy. The monochromator as well as the other optical components of the beamline are optimized accordingly. The endstation comprises a six‐axis diffractometer that is capable of carrying heavy loads related to non‐ambient sample environments such as, for example, ultrahigh‐vacuum systems, high‐pressure cells or liquid‐helium cryostats. X‐ray absorption spectra from several reference compounds illustrate the performance. Besides transmission measurements, fluorescence detection for dilute sample systems as well as surface‐sensitive reflection‐mode experiments have been performed. The results show that high‐quality EXAFS data can be obtained in the quick‐scanning EXAFS mode within a few seconds of acquisition time, enabling time‐resolved in situ experiments using standard beamline equipment that is permanently available. The performance of the new beamline, especially in terms of the photon flux and energy resolution, is competitive with other insertion‐device beamlines worldwide, and several sophisticated experiments including surface‐sensitive EXAFS experiments are feasible.     

A combination of a Drickamer anvil apparatus and monochromatic X‐rays for stress and strain measurements under high pressure

A modified Drickamer anvil apparatus has been developed to combine with monochromatic synchrotron radiation for high‐pressure X‐ray diffraction and radiography in the GSECARS bending‐magnet station, 13‐BM‐D, at the Advanced Photon Source, Argonne, USA. Using this experimental set‐up, deformation experiments can be carried out at pressures in excess of 30 GPa at high temperatures. Differential stresses and total axial strains of polycrystalline platinum and Mg₂SiO₄ ringwoodite have been measured up to 32 GPa at room temperature using tungsten carbide anvils. The total axial strain of the platinum increases with pressure and reaches about 55% at the highest pressure. A test run using a composite sintered diamond anvil system was performed. The use of X‐ray‐tranparent anvils enables the entire Debye rings to be observed up to 10° 2θ. With high‐energy photons (65–70 keV), this allows a coverage in Q (= 2π sinθ/λ) to about 3 Å^?1, thus making it possible to evaluate hydrostatic pressure and differential stress in crystalline minerals using diffraction. This, coupled with the ability to determine axial strain, allows deformation studies to be performed to pressures above 30 GPa.     

Spectrometer for hard X‐ray free‐electron laser based on diffraction focusing

X‐ray free‐electron lasers (XFELs) generate sequences of ultra‐short spatially coherent pulses of X‐ray radiation. A diffraction focusing spectrometer (DFS), which is able to measure the whole energy spectrum of the radiation of a single XFEL pulse with an energy resolution of ΔE/E? 2 × 10^?6, is proposed. This is much better than for most modern X‐ray spectrometers. Such resolution allows one to resolve the fine spectral structure of the XFEL pulse. The effect of diffraction focusing occurs in a single‐crystal plate due to dynamical scattering, and is similar to focusing in a Pendry lens made from a metamaterial with a negative refraction index. Such a spectrometer is easier to operate than those based on bent crystals. It is shown that the DFS can be used in a wide energy range from 5 keV to 20 keV.     

Flexible X‐ray detector based on sliced lead iodide crystal

A promising flexible X‐ray detector based on inorganic semiconductor PbI₂ crystal is reported. The sliced crystals mechanically cleaved from an as‐grown PbI₂ crystal act as the absorber directly converting the impinging X‐ray photons to electron hole pairs. Due to the ductile feature of the PbI₂ crystal, the detector can be operated under a highly curved state with the strain on the top surface up to 1.03% and still maintaining effective detection performance. The stable photocurrent and fast response were obtained with the detector repeated bending to a strain of 1.03% for 100 cycles. This work presents an approach for developing efficient and cost‐effective PbI₂‐based flexible X‐ray detector.

     

A setup for synchrotron‐radiation‐induced total reflection X‐ray fluorescence and X‐ray absorption near‐edge structure recently commissioned at BESSY II BAMline

An automatic sample changer chamber for total reflection X‐ray fluorescence (TXRF) and X‐ray absorption near‐edge structure (XANES) analysis in TXRF geometry was successfully set up at the BAMline at BESSY II. TXRF and TXRF‐XANES are valuable tools for elemental determination and speciation, especially where sample amounts are limited (<1 mg) and concentrations are low (ng ml^?1 to µg ml^?1). TXRF requires a well defined geometry regarding the reflecting surface of a sample carrier and the synchrotron beam. The newly installed chamber allows for reliable sample positioning, remote sample changing and evacuation of the fluorescence beam path. The chamber was successfully used showing accurate determination of elemental amounts in the certified reference material NIST water 1640. Low limits of detection of less than 100 fg absolute (10 pg ml^?1) for Ni were found. TXRF‐XANES on different Re species was applied. An unknown species of Re was found to be Re in the +7 oxidation state.     

SUT‐NANOTEC‐SLRI beamline for X‐ray absorption spectroscopy

The SUT‐NANOTEC‐SLRI beamline was constructed in 2012 as the flagship of the SUT‐NANOTEC‐SLRI Joint Research Facility for Synchrotron Utilization, co‐established by Suranaree University of Technology (SUT), National Nanotechnology Center (NANOTEC) and Synchrotron Light Research Institute (SLRI). It is an intermediate‐energy X‐ray absorption spectroscopy (XAS) beamline at SLRI. The beamline delivers an unfocused monochromatic X‐ray beam of tunable photon energy (1.25–10 keV). The maximum normal incident beam size is 13 mm (width) × 1 mm (height) with a photon flux of 3 × 10⁸ to 2 × 10¹⁰ photons s^?1 (100 mA)^?1 varying across photon energies. Details of the beamline and XAS instrumentation are described. To demonstrate the beamline performance, K‐edge XANES spectra of MgO, Al₂O₃, S₈, FeS, FeSO₄, Cu, Cu₂O and CuO, and EXAFS spectra of Cu and CuO are presented.