Novel Fabrication of Conductive Polymers Contained Micro‐Array Gas Sensitive Films Using A Micromanipulation Method

A novel method for fabricating a micro gas sensor film on an indium tin oxide (ITO) electrode patterned using micro‐machining technology was developed. A micromanipulation system equipped with a counter electrode (Au; Ø10 μm) and a microsyringe, which was connected to a microinjection system, was first constructed. With this system, micro gas sensor arrays could be successfully prepared on ITO electrodes. Two kinds of micro gas sensor films were prepared, based on polythiophene (PTh) and poly(3‐n‐dodecylthiophene) (PD). The response behavior of conventional PTh and micro‐PTh films against NH₃ at three different operating temperatures (25, 40 and 60 °C) was investigated by measuring the resistance of the film. With the micro‐PTh film, a reversible response was observed against NH₃ when measured at 40 and 60 °C. In addition, the responsive characteristics of the microsensor films against different testing gases were examined at the three operating temperatures. The resistance of the microsensor films of PTh and PD changed considerably, depending on the type of testing gas, allowing these sensor films to be used for the detection of various gases. Furthermore, the microsensor films had a high stability compared with conventional films prepared from the same polymer.     

Surface‐confined photopolymerization of single‐ and mixed‐monomer systems to tailor the wettability of poly(L‐lactide) film

The major objective of this research was to modify the surface characteristics of poly(L ‐lactide) (PLA) by grafting a combination of hydrophilic polymers to produce a continuum of hydrophilicity. The PLA film was solvent cast, and the film surfaces were activated by ultra violet (UV) irradiation. A single monomer or combination of two monomers, selected from vinyl acetate (VAc), acrylic acid (AA), and acrylamide (AAm), were then grafted to the PLA film surface using a UV induced photopolymerization process. The film surfaces resulting from each reaction step were analyzed using ATR‐FTIR spectroscopy and contact angle goniometry. Results showed that AAm dominated the hydrophilicity of the film surface when copolymerized with VAc or AA, while the water contact angles for PLA films grafted with poly(vinyl acetate‐co‐acrylic acid) varied more gradually with feed composition. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6534‐6543, 2006     

Green synthesis of Cu/zirconium silicate nanocomposite by using Rubia tinctorum leaf extract and its application in the preparation of N‐benzyl‐N‐arylcyanamides

A simple and convenient protocol was established for the synthesis of the N‐benzyl‐N‐arylcyanamides through N‐benzylation of a wide variety of arylcyanamides using copper nanoparticles immobilized on natural zirconium silicate as a novel and green heterogeneous catalyst. In this study, we showed a novel, cost efficient, convenient and simple method for green synthesis of Cu/zirconium silicate nanocomposite by using Rubia tinctorum leaf extract as capping and reducing agent. The structure of the novel catalyst was successfully characterized using a number of micro/spectroscopic techniques such as XRD, FESEM, BET, EDS, TEM, FT‐IR and elemental mapping. TEM micrographs of obtaining biocatalyst revealed mostly spherical particles with an average diameter of about 15–25 nm on the surface of natural support. The prepared catalyst was used in the N‐benzylation of a variety of arylcyanamides with benzyl bromide and showed high activity and stability for the efficient synthesis of N‐benzylarylcyanamides in good yields. Remarkably, the catalyst can be easily recovered from the reaction medium and reused up to five runs without losing its catalytic activity.     

A Novel pH/Light‐Triggered Surface for DNA Adsorption and Release

A simple strategy for the immobilization of Cy3‐labeled single strand DNA (Cy3‐ssDNA) on a Si(001) surface and its release under control of both light and pH stimuli is presented. In order to prepare a dual pH/light‐triggered surface, positively chargeable azobenzene molecules are self‐assembled on the Si(001) surface. The surface wettability of this substrate can be changed under influence of both light and pH conditions. The substrates can be positively charged under mildly acidic conditions. The pH‐sensitive behavior of the film allows binding of Cy3‐ssDNA on the functionalized Si(001) surface through e?ective electrostatic interactions with the negatively charged polynucleotide backbone. Moreover, irradiation of the film with UVA light induces trans–cis isomerization of the azobenzene units on the surface. As a result, the binding a?nity for DNA decreases due to the changing surface hydrophilicity. In order to understand and control the reversible photoswitchable mechanism of this surface, water contact angles are measured after UVA and visible light irradiation. The release of DNA from a dual pH/light‐sensitive sample is performed using fluorescence microscopy. The results show that irradiation of the film with UVA light induces trans–cis isomerization of the photoresponsive azobenzene units; this leads to significant changes in the surface hydrophilicity and reduces the binding affinity for DNA.     

Detecting changes in arabidopsis cell wall composition using time‐of‐flight secondary ion mass spectrometry

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was previously used to characterize lignocellulosic materials, including woody biomass. ToF‐SIMS can acquire both rapid spectral and spatial information about a sample's surface composition. In the present study, ToF‐SIMS was used to characterize the cell walls of stem tissue from the plant model organism, Arabidopsis thaliana. Using principal component analyses, ToF‐SIMS spectra from A. thaliana wild‐type (Col‐0), cellulose mutant (irx3), and lignin mutant (fah1) stem tissues were distinguished using ToF‐SIMS peaks annotated for wood‐derived lignocellulose, where spectra from the irx3 and fah1 were characterized by comparatively low polysaccharide and syringyl lignin content, respectively. Spatial analyses using ToF‐SIMS imaging furthermore differentiated interfascicular fiber and xylem vessels based on differences in the lignin content of corresponding cell walls. These new data support the applicability of ToF‐SIMS peak annotations based on woody biomass for herbaceous plants, including model plant systems like arabidopsis. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetic micro‐solid‐phase extraction based on magnetite‐MCM‐41 with gas chromatography–mass spectrometry for the determination of antidepressant drugs in biological fluids

A new facile magnetic micro‐solid‐phase extraction coupled to gas chromatography and mass spectrometry detection was developed for the extraction and determination of selected antidepressant drugs in biological fluids using magnetite‐MCM‐41 as adsorbent. The synthesized sorbent was characterized by several spectroscopic techniques. The maximum extraction efficiency for extraction of 500 μg/L antidepressant drugs from aqueous solution was obtained with 15 mg of magnetite‐MCM‐41 at pH 12. The analyte was desorbed using 100 μL of acetonitrile prior to gas chromatography determination. This method was rapid in which the adsorption procedure was completed in 60 s. Under the optimized conditions using 15 mL of antidepressant drugs sample, the calibration curve showed good linearity in the range of 0.05–500 μg/L (r ² = 0.996–0.999). Good limits of detection (0.008–0.010 μg/L) were obtained for the analytes with good relative standard deviations of <8.0% (n  = 5) for the determination of 0.1, 5.0, and 500.0 μg/L of antidepressant drugs. This method was successfully applied to the determination of amitriptyline and chlorpromazine in plasma and urine samples. The recoveries of spiked plasma and urine samples were in the range of 86.1–115.4%. Results indicate that magnetite micro‐solid‐phase extraction with gas chromatography and mass spectrometry is a convenient, fast, and economical method for the extraction and determination of amitriptyline and chlorpromazine in biological samples.     

Synthesis and Molecular Structure of New S‐Nucleosides of 5‐(4‐Pyridyl)‐4‐Aryl‐4H‐1,2,4‐Triazole‐3‐Thiols

The synthesis of some new S‐nucleosides of 5‐(4‐pyridyl)‐4‐aryl‐4H‐1,2,4‐triazole‐3‐thiols ( 4a‐n ) is described. Direct glycosylation of ( 4a‐n ) with tetra‐O‐acetyl‐α‐D‐glucopyranosyl bromide in the presence of potassium hydroxide followed by deacetylation using dry ammonia in methanol gave the corresponding 3‐S‐(ñ‐D‐glucopyranosyl)‐5‐(4‐pyridyl)‐4‐aryl‐4H‐1,2,4‐triazoles ( 6a‐n ) in good yields. All the compounds were fully characterized by means of ¹HNMR, ¹³C NMR spectra and elemental analyses. To assist in the interpretation of the spectroscopic data, the crystal structure of 3‐S‐(2′,3′,4′,6′‐tetra‐O‐acetyl‐β‐D‐glucopyranosyl)‐5‐(4‐pyridyl)‐4‐phenyl‐4H‐1,2,4‐triazole ( 5a ) was determined by X‐ray diffraction.     

Ultrathin polymer gate buffer layer for air‐stable,low‐voltage,n‐channel organic thin‐film transistors

An ultrathin poly(methyl methacrylate) (PMMA) buffer layer was developed to improve the performance of n‐channel organic thin‐film transistors (OTFTs). The 8 nm‐thick PMMA film, prepared by spin‐coating, provided a very smooth surface and a uniform coverage on SiO₂ surface reproducibly, which was confirmed by X‐ray reflectivity (XR) measurement. Then, we fabricated N,N′‐ditridecyl‐3,4,9,10‐perylenetetracarboxylic diimide (PTCDI‐C13) thin‐film transistors with and without this 8 nm‐thick PMMA insulating layer on SiO₂ gate insulators and achieved one‐order increase of field‐effect mobility (up to 0.11 cm²/(Vs) in a vacuum), one‐half decrease of threshold voltage, and reduction of current hysteresis with the PMMA layer. Only TFTs with the PMMA layer displayed n‐channel operation in air and showed field‐effect mobility of 0.10 cm²/(Vs). We consider that electrical characteristics of n‐channel OTFTs were considerably improved because the ultrathin PMMA film could effectively passivate the SiO₂ insulator surface and decrease interfacial electron traps. This result suggests the importance of the ultrathin PMMA layer for controlling the interfacial state at the semiconductor/insulator interface and the device characteristics of OTFTs. Copyright © 2009 John Wiley & Sons, Ltd.     

A Facile Synthesis of Aryl‐Substituted Hydrazono‐Pyrazolyl[1,2,4]triazolo[3,4‐b][1,3,4][thiadiazol]‐coumarin Derivatives

Some inimitable and therapeutic coumarin‐substituted fused[1,2,4]triazolo‐[3,4‐b][1,3,4]thiadizole derivatives were synthesized by the cyclocondensation reaction of 2‐oxo‐2H‐chromene‐3‐carboxylic acid ( 1 ) and 4‐amino‐5‐hydrazinyl‐4H‐[1,2,4]‐triazole‐3‐thiol ( 2 ) by using phosphorous oxychloride as a cyclizing agent. This cyclized intermediate 3‐(3‐hydrazino‐[1,2,4]triazolo[3,4‐b][1,3,4]thiadiazol‐6‐yl)‐chromen‐2‐one ( 3 ) later condensation with various ethyl 2‐(2‐arylhydrazono)‐3‐oxobutanoates ( 4 ) in NaOAc/MeOH under reflux conditions afforded the corresponding new series of aryl‐substituted hydrazono‐pyrazolyl‐[1,2,4]triazolo[3,4‐b][1,3,4][thiadiazol]‐coumarin derivatives ( 5 ) in good to excellent yields. The structures of newly synthesized compounds were established on the basis of elemental analysis, IR, ¹H NMR and mass spectroscopic studies.     

Environmental vapor induced self‐assembly of an amphiphilic block copolymer poly(styrene‐b‐acrylamide) onto the solid substrate

The chemical and micro‐structural changes at the top surface of the film of amphiphilic block copolymer poly(styrene‐b‐acrylamide) (PS₉₅₀‐b‐PAM₅₀) induced by different environmental conditions and temperature have been studied. Atomic force microscopy (AFM), Transmission electron microscopy (TEM), Scanning electron microscope (SEM), X‐ray Photoelectron Spectroscopy (XPS), and contact angle (CA) goniometry studies revealed that the roughness and the surface property in terms of hydrophilicity/hydrophobicity of the film strongly depend on the environmental conditions. Humidity, presence of solvent vapor and temperature at the time of film preparation have immense role in controlling surface properties. Hence, it is suggested that the surface properties of the amphiphilic block copolymer film can be tuned according to the requirement for its potential applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrostatic Layer‐by‐Layer Assembly of Polycation and DNA Multilayer Films by Real‐time Surface Plasmon Resonance Technique

The assembly of alternating DNA and positively charged poly‐(dimethyldiallylammonium chloride) (PDDA) multilayer films by electrostatic layer‐by‐layer adsorption has been studied. Real time surface plasmon resonance (BIAcore) technique was used to characterize and monitor the formation of multilayer films in solution in real time continuously. The results indicate that the uniform multilayer can be obtained on the poly‐(ethylenimine) (PEI) coated substrate surface. The kinetics of the adsorption of DNA on PDDA surface was also studied by real‐time BIAcore technique, and the observed rate constant was calculated using a Langmuir model (k_obs = (1.28 ± 0.08) × 10^?2s^?1).     

Structure‐Dependent Electronic Nature of Star‐Shaped Oligothiophenes,Probed by Ensemble and Single‐Molecule Spectroscopy

We have investigated the photophysical properties of star‐shaped oligothiophenes with three terthiophene arms (meta to each other, S3 ) or six terthiophene arms (ortho‐, meta‐, and para‐arranged, S6 ) connected to an ethynylbenzene core to elucidate the relationship between their molecular structure and electronic properties by using a combination of ensemble and single‐molecule spectroscopic techniques. We postulate two different conformations for molecules S3 and S6 on the basis of the X‐ray structure of hexakis(5‐hexyl‐2‐thienlyethynyl)benzene and suggest the coexistence of these conformers by using spectroscopic methods. From the steady‐state spectroscopic data of compound S6 , we show that the exciton is delocalized over the core structure, but that the meta‐linkage in compound S3 prevents the electronic communication between the arms. However, in single‐molecule spectroscopic measurements, we observed that some molecules of compound S3 showed long fluorescence lifetimes (about 1.4 ns) in the fluorescence‐intensity trajectories, which indicated that π electrons were delocalized along the meta linker. Based on these observations, we suggest that the delocalized exciton is intensely sensitive towards the dihedral angle between the core and the adjacent thiophene ring, as well as to the substituted position of the terthiophene arms. Our results highlight that the fluorescence lifetimes of compounds S3 and S6 are strongly correlated with the spatial location of their excitons, which is mainly affected by their conformation, that is, whether the innermost thiophene rings are facing each other or not. More interestingly, we observed that the difference between the degrees of ring‐torsional flexibility of compounds S3 and S6 results in their sharply contrasting fluorescence properties, such as a change in fluorescence intensity as a function of temperature.     

Selective Metal‐vapor Deposition on Organic Surfaces

Selective metal‐vapor deposition signifies that metal‐vapor atoms are deposited on a hard organic surface, but not on a soft (low glass transition temperature, low T_g) surface. In this paper, we introduce the origin, extension, and applications of selective metal‐vapor deposition. An amorphous photochromic diarylethene film shows light‐controlled selective metal‐vapor deposition, which is caused by a large T_g change based on photoisomerization, but various organic surfaces, including organic crystal and polymers, can be utilized for achieving selective metal‐vapor deposition. Various applications of selective metal‐vapor deposition, including cathode patterning of organic light‐emitting devices, micro‐thin‐film fuses, multifunctional diffraction gratings, in‐plane electrical bistability for memory devices, and metal‐vapor integration, have been demonstrated.     

Synthesis,Characterization and Crystal Structure of Some Novel 1‐(3,5‐Dimethyl‐1H‐pyrazol‐1‐yl)‐3‐(substituted anilino)propan‐1‐ones

Michael addition of some substituted anilines to methyl acrylate in acidic medium afforded the methyl 3-(substituted anilino)propionates (1a—1i), which on treatment with hydrazine hydrate in methanol were converted into corresponding 3-(substituted anilino) propionohydrazides (2a—2i) in good yields. Microwave irradiation of the latter with pentane-2,4-dione afforded 1-(3,5-dimethyl-1H-pyrazol-1-yl)-3-(substituted anilino)propan-1-ones (3a—3i) under solventless conditions. The structures were confirmed by spectroscopic data, elemental analyses and in case of the 3h by single crystal X-ray diffraction data.     

Super‐Hydrophobic PDMS Surface with Ultra‐Low Adhesive Force

Summary: Rough polydimethylsiloxane (PDMS) surface containing micro‐, submicro‐ and nano‐composite structures was fabricated using a facile one‐step laser etching method. Such surface shows a super‐hydrophobic character with contact angle higher than 160° and sliding angle lower than 5°, i.e. self‐cleaning effect like lotus leaf. The wettabilities of the rough PDMS surfaces can be tunable by simply controlling the size of etched microstructures. The adhesive force between etched PDMS surface and water droplet is evaluated, and the structure effect is deduced by comparing it with those own a single nano‐ or micro‐scale structures. This super‐hydrophobic PDMS surface can be widely applied to many areas such as liquid transportation without loss, and micro‐pump (creating pushing‐force) needless micro‐fluidic devices.

Etched PDMS surface containing micro‐, submicro‐, and nano‐composite structures shows a self‐cleaning effect with water CA as high as 162° and SA lower than 5°.     

Investigation of Some Functionalization Reactions of 4‐Benzoyl‐5‐phenyl‐1‐(4‐methoxyphenyl)‐1H‐pyrazole‐3‐carbonyl Chloride and Their Antimicrobial Activity

The 1H‐pyrazole‐3‐carboxylic acid 1 was converted via reactions of its acid chloride 3 with various asymmetrical disubstituted urea and alcohol derivatives into the corresponding novel 4‐benzoyl‐N‐(N′,N′‐dialkylcarbamyl)‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxamide 4a , b and alkyl 4‐benzoyl‐1‐(4‐methoxyphenyl)‐5‐phenyl‐1H‐pyrazole‐3‐carboxylate 7a‐c , respectively, in good yields (57%‐78%). Friedel‐Crafts reactions of 3 with aromatic compouns for 15 min.‐2 h led to the formation of the 4‐3‐diaroyl‐1‐(4‐hydroxyphenyl)‐5‐phenyl‐1H‐pyrazoles 9a‐c , 4‐benzoyl‐1‐(4‐methoxyphenyl)‐3‐aroyl‐5‐phenyl‐1H‐pyrazoles 10a , b and than from the acylation reactions of 9a‐c were obtained the 3,4‐diaroyl‐1‐(4‐acyloxyphenyl)‐5‐phenyl‐1H‐pyrazoles 13a‐d . The structures of all new synthesized compounds were established by NMR experiments such as ¹H, and ¹³C, as well as 2D COSY and IR spectroscopic data, and elemental analyses. All the compounds were evaluated for their antimicrobial activities (agar diffusion method) against eight bacteria and two yeasts.     

Stimuli‐responsive micelles of amphiphilic AMPS‐b‐AAL copolymers in layer‐by‐layer films

Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,Characterization and Crystal Structure of Some Novel 1‐Aryl‐2‐Thioxo‐2,3‐Dihydro‐1H‐Quinazolin‐4‐Ones

The base catalyzed intramolecular nucleophilic cyclization of 1‐(2‐haloaroyl)‐3‐aryl thioureas ( 1a‐i ), in the presence of DMF afforded the 1‐aryl‐2‐thioxo‐2,3‐dihydro‐1H‐quinazolin‐4‐ones ( 2a‐i ). The structures were confirmed by spectroscopic data, elemental analyses and in case of the 2c by single crystal X‐ray diffraction data. The mechanistic studies support an intramolecular nucleophilic substitution (S_NAr mechanism) rather than intramolecular aromatic substitution (S_RN1 mechanism).     

Computational design and fabrication of core–shell magnetic molecularly imprinted polymer for dispersive micro‐solid‐phase extraction coupled with high‐performance liquid chromatography for the determination of rhodamine 6G

A novel core–shell magnetic nano‐adsorbent with surface molecularly imprinted polymer coating was fabricated and then applied to dispersive micro‐solid‐phase extraction followed by determination of rhodamine 6G using high‐performance liquid chromatography. The molecularly imprinted polymer coating was prepared by copolymerization of dopamine and m‐aminophenylboronic acid (functional monomers), in the presence of rhodamine 6G (template). The selection of the suitable functional monomers was based on the interaction between different monomers and the template using the density functional theory. The ratios of the monomers to template were further optimized by an OA₉ (3⁴) orthogonal array design. The binding performances of the adsorbent were evaluated by static, kinetic, and selective adsorption experiments. The results reveal that the adsorbent possesses remarkable affinity and binding specificity for rhodamine 6G because of the enhanced Lewis acid‐base interaction between the B(Ш) embedded in the imprinted cavities and the template. The nano‐adsorbent was successfully applied to dispersive micro‐solid‐phase extraction coupled to high‐performance liquid chromatography for the trace determination of rhodamine 6G in samples with a detection limit of 2.7 nmol/L. Spiked recoveries ranged from 93.0–99.1, 89.5–92.7, and 86.9–105% in river water, matrimony vine and paprika samples, respectively, with relative standard deviations of less than 4.3%.     

Synthesis and polymerization of a new nitrogen‐containing bis‐ortho‐diynylarene monomer

This study focuses on the preparation, characterization, and optical properties of new bis(3,4‐diphenylethynylphenyl)phenylamine. This is the first nitrogen‐containing bis‐ortho‐diynylarene (BODA) monomer having a nitrogen atom as the spacer group. BODA monomers are usually prepared from common bisphenols, thereby providing great synthetic versatility and the opportunity to develop a wide array of novel polyarylene thermosets by varying the aromatic spacer group. The new bis(3,4‐bisphenylethynylphenyl)phenylamine was synthesized in five steps. This compound emits an intense blue color (λ = 438 nm) upon irradiation by UV light and may be suitable for use as an emitting layer in electroluminescent devices. Bis‐(3,4‐bisphenylethynylphenyl)phenylamine and its polymer have photoluminescence quantum yields 34 and 38%, respectively, and long excited‐state lifetimes of 3.2 and 3.6 ns, respectively. The structure of the monomer and its polymer were characterized using spectroscopic techniques including Ultraviolet–visible Spectrophotometer, Photoluminescence Spectrophotometer, Fourier Transform infrared spectroscopy, and Gel Permeation Chromatography. The polymerizations were studied by Differential Scanning Calorimeter. The amount of weight loss and the thermostability of the nitrogen‐containing polymer were determined from thermogravimetric analysis. The electrical conductivity of neat HCl‐doped BODA‐derived polymer film was measured according to the standard four‐point probe technique. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6988–6996, 2006