激光在近表面弹性性质梯度变化的材料中激发超声波的数值分析

激光激发超声波为评价材料近表面弹性性质提供了有效的手段. 考虑到由于冲击硬化、表面热处理、表面氧化等引起的金属材料近表面层弹性性质的变化，建立了一种激光在基底上的梯度材料中激发超声波的理论模型. 用有限元方法模拟了热弹条件下脉冲激光作用于材料上表面激发出的超声波及其传播过程，研究了近表面层离散的层数对超声波的产生和传播的影响，并分别讨论了表面层“变硬”和“变软”两种情况下声表面波的模式变化及用二维傅里叶变换得到各模式的色散曲线. 为进一步研究近表面层的弹性性质建立合理的计算模型及材料性质的反演提供了理论依 关键词： 超声波 有限元法 近表面弹性性质 色散     

激光热弹激发涂层/基底系统中声表面波的有限元数值模拟

激光激发声表面波提供了评价涂层或薄膜的弹性性质的有效手段。考虑激光作用过程中材料热物理参数随温度变化的实际情况,在研究网格大小和时间步长这二个重要参数和求解稳定性的基础上,建立了优化的有限元模型数值模拟两种典型涂层基底系统中声表面波的激光热弹激发和传播过程。数值模拟结果表明:除了掠面纵波外,在快基底慢涂层系统中得到了正常的色散表面波,而在慢基底快涂层系统中得到了反常色散表面波。进一步,采取减小激发激光光斑的办法,使激发出来的声表面波频率高于慢基底快涂层系统中的截止频率时,在慢基底快涂层系统中得到了伪表面波。     

近表面层黏性模量梯度变化的复合平板中激光热弹激发声表面波的传播特性

考虑复合平板近表面层的黏性模量变化特性,建立激光在复合平板中热弹激发声表面波的有限元模型,系统研究复合平板中声表面波的传播特性,并讨论近表面层的黏性模量、厚度与Lamé常数对声表面波衰减特性的影响,在此基础上,结合理论计算的色散与衰减曲线对声表面波传播特性进行验证.本研究为激光超声技术无损评估复合平板近表面层的力学性能提供理论指导,同时也为研究复合平板表面微裂纹问题提供可行性思路.     

由于表面粗糙引起的激光声表面波色散的实验和理论研究

表面粗糙是材料制造过程中必有的副产物, 粗糙表面会引起其中传播的声表面波的速度发生变化. 在利用激光声表面波对材料性质进行评估时, 常用宽带的激光声表面波速度频散特性对材料性质进行反演. 为了研究表面粗糙度是否能作为反演的特征参数之一, 本文建立了激光在表面粗糙样品中激发声表面波、聚偏氟乙烯换能器宽带接收声表面波的实验装置来研究不同粗糙度表面对声表面波速度的影响; 理论上建立了激光在粗糙表面中激发声表面波的计算模型, 利用有限元法得到声表面波的时域特征, 并进一步得到声表面波的速度色散曲线, 理论结果和实验结果能很好地拟合. 这为利用激光声表面波对表面粗糙的评估提供理论和实验依据. 关键词： 表面粗糙 激光声表面波 速度色散 聚偏氟乙烯传感器 有限元法     

利用激光超声研究功能梯度材料中声表面波的传播特性

利用有限元的方法建立了脉冲激光在功能材料中激发声表面波的理论模型,根据该理论模型分别分析了脉冲激光在不同空间调制下所激发的声表面波(SAWS)在功能梯度材料表面的传播特性,以及不同力学参量变化对所激发的声表面波传播特性的影响.模拟结果表明,线源激发的宽带声表面波在功能梯度材料表面传播时,声表面波会出现明显的色散效应;当...     

激光超声检测铝合金材料的残余应力分布

为了有效检测铝合金材料上的残余应力分布,研究了用激光超声技术来检测铝合金材料上的残余应力分布的方法。该方法用Nd:YAG脉冲激光激发声表面波,并用外差激光干涉仪接收。理论分析表明可通过测量表面波在不同位置上声速的相对变化,来确定试样的残余应力分布。并对无残余应力、有压缩残余应力、有拉伸残余应力的三个试样应力分布,进行了实验测定。结果证实了试样的残余应力分布可引发声表面波在不同位置上声速的相对变化,也证实了激光激发声表面波及其接收技术是一种无损检测材料内残余应力分布的有效方法。     

激光激发黏弹表面波有限元数值模拟

研究黏弹性材料中激光激发的Rayleigh波的传播特征. 考虑到黏弹性材料的黏性特征,在频域内建立黏弹性材料中激光激发Rayleigh波的有限元数值模型. 在验证有限元频域数值模型正确性的基础上,模拟脉冲激光作用在黏弹性材料上激发出Rayleigh波,进而讨论激光激发的黏弹Rayleigh波的传播特征,并比较黏弹性材料与弹性材料中激光激发的Rayleigh波差异,同时分析了材料的黏性劲度参量变化对Rayleigh波特征的影响. 关键词： 表面波 激光超声 有限元方法 黏弹性     

声表面波渡越时间法检测黏弹性介质表面凹痕深度的研究

研究声表面波渡越时间法检测黏弹性介质表面凹痕的深度.基于频域动力学平衡方程,采用有限元方法分别在有表面凹痕的弹性和黏弹性介质中,建立激光激发声表面波的数值模型.研究材料的黏性引起的声表面波波速和频散的变化,对表面凹痕检测的影响,在此基础上,根据反射和透射声表面波的传播路径及到达时间,利用渡越时间法检测黏弹性介质中的表面...     

固体中脉冲激光激发声表面波的理论研究

本文运用本征函数展开的方法对固体材料中脉冲激光激发的声表面波进行了理论研究，在考虑热弹激发的条件下，利用三维的轴对称模型，得到了脉冲激光光源的脉冲宽度以及聚焦半径对固体材料中声表面波信号的时域及频域的影响，对进行超短脉冲激光激发超声的研究具有指导意义。     

利用PVDF传感器检测激光超声的实验研究

简要介绍了激光超声技术以及声表面波的基本特点、激光超声产生和接收的基本原理及激光超声技术的应用。概述了聚偏二氟乙烯（PVDF）压电薄膜材料的结构、性质和应用，以及薄膜压电性产生的机理。对PVDF换能器的设计思路和实验方法进行了简单讨论。具体实验采用脉冲激光器激发声表面波，利用PVDF传感器接收实验信号，调试实验信号，得出波形，并对实验现象作出初步分析。证实了该实验装置应用于激光超声无损检测的可行性与可靠性。     

Laser-induced ultrasonic waves in steels with gradient changes of elastic property

Taking account of the gradient changes of the near-surface elastic property, a model of multiple gradient layers on a semi-infinite substrate is established. A finite element method (FEM) model is developed to simulate the laser-induced thermo-elastic generation and propagation of acoustic waves in the system. The two-dimensional fast Fourier transform (2-D FFT) method has been used to analyze the ultrasonic signal. The phase velocity dispersion is obtained for a number of waves of different modes obtained and is analyzed in systems with different spatial variations of the material elastic properties and different affected layer depths. The model can be used to extract the elastic parameters of the near-surface regions in an effective way.     

Acoustoseismic wave fields generated by surface seismic vibrators

Results of experimental and theoretical studies of acoustoseismic wave fields generated by surface seismic vibrators are presented. In experiments with high-power seismic vibrators operating in a frequency range of 5–10 Hz, acoustic waves were recorded at distances up to 50 km from the source. The long-range sound propagation from seismic vibration sources was observed in a near-surface waveguide arising due to temperature inversion. The effect of the acoustoseismic induction, i.e., excitation of surface seismic waves by the acoustic wave arriving from the vibrator, was also detected. The results of mathematical modeling of the acoustoseismic field generation by an operating seismic vibrator are presented. They include the modeling of the radiation of a harmonic acoustic wave’s by the vibrator, its trapping by the near-surface waveguide, the long-range low-frequency acoustic wave propagation in the presence of the waveguide, and the induction of a surface seismic wave by the arriving harmonic acoustic wave. It is shown that a seismoacoustic wave propagating at the boundary between the elastic earth and the atmosphere is an analog of the Stonely wave that appears in the presence of a near-surface low-temperature layer in the atmosphere.     

Investigation of surface acoustic waves in laser shock peened metals

Laser shock peening is a well-known method for extending the fatigue life of metal components by introducing near-surface compressive residual stress. The surface acoustic waves (SAWs) are dispersive when the near-surface properties of materials are changed. So the near-surface properties (such as the thickness of hardened layers, elastic properties, residual stresses, etc.) can be analyzed by the phase velocity dispersion. To study the propagation of SAWs in metal samples after peening, a more reasonable experimental method of broadband excitation and reception is introduced. The ultrasonic signals are excited by laser and received by polyvinylindene fluoride (PVDF) transducer. The SAW signals in aluminum alloy materials with different impact times by laser shock peening are detected. Signal spectrum and phase velocity dispersion curves of SAWs are analyzed. Moreover, reasons for dispersion are discussed.     

The study of guided waves in surfaces and thin supported films using surface Brillouin scattering and acoustic microscopy

This paper reviews the use of surface Brillouin scattering (SBS) and acoustic microscopy (AM) in studying the surface dynamics of solids in order to obtain information about the near-surface elastic properties of solids and thin supported films. The vibrational modes that are probed by these means include Rayleigh surface and pseudo-surface acoustic waves, longitudinal lateral waves (surface skimming bulk longitudinal waves) and various thin film guided modes, such as Sezawa and Love waves. SBS is the inelastic scattering of light, mediated by thermodynamic fluctuations in the surface elevation and near surface elastic strains. The scattering cross-section is conveniently expressed in terms of Fourier domain elastodynamic Green's functions. AM depends on the insonification of a surface through a coupling fluid, and the resulting excitation and subsequent decay of the various surface modes. The complex reflectivity of the fluid-loaded surface, and the line and point force surface Green's functions are invoked in the interpretation of different modalities of AM, yielding much the same information about the surface dynamics. The focus in this paper is on the Green's function approach. A number of illustrative examples, drawn from the authors' research, are provided.     

A Green's function method for surface acoustic waves in functionally graded materials

Acoustic wave propagation in anisotropic media with one-dimensional inhomogeneity is discussed. Using a Green's function approach, the wave equation with inhomogeneous variation of elastic property and mass density is transformed into an integral equation, which is then solved numerically. The method is applied to find the dispersion relation of surface acoustic waves for a medium with continuously or discontinuously varying elastic property and mass density profiles.     

研究激光激发的声表面波与材料近表面缺陷的振荡效应

根据激光激发声表面波的热弹运动方程及热传导方程, 采取有限元技术对方程进行求解, 得到声表面波传播波形图. 当声表面波经过近表面缺陷时, 声表面波与近表面缺陷之间产生一种振荡效应, 通过近表面缺陷的振荡波形幅值存在一个逐渐增加后又逐渐减小的过程. 当声表面波经过不同深度的近表面缺陷时, 振荡信号中心频率存在一定的变化规律. 数值仿真结果表明: 当近表面缺陷深度从0.1 mm到0.5 mm变化时, 振荡效应产生的振荡信号中心频率从0.4 MHz到0.76 MHz变化, 振荡信号中心频率与近表面缺陷深度呈近似线性关系, 这为近表面缺陷的定量检测提供了一种理论基础.     

声表面波在圆弧处反射及透射的数值研究*

为了研究直达表面波在圆弧过渡面处传播性能的变化,采用有限元方法模拟了热弹机制下,线性脉冲激光辐照金属铝块表面时激发的表面波在近表面传播过程中,在不同曲率半径的圆弧处发生的反射及透射现象,建立了圆弧半径与反射表面波以及透射表面波时域信号特征之间的联系。计算结果表明:曲率半径与表面波中心波长的数值关系对表面波在圆弧处的传播有显著的影响;同时证明了根据透射表面波信号的到达时间可以反演圆弧半径的大小,为之后利用表面波信号定量检测材料表面圆弧凹痕的深度提供了理论依据。     

High-frequency volume and boundary acoustic backscatter fluctuations in shallow water

Volume and boundary acoustic backscatter envelope fluctuations are characterized from data collected by the Toroidal Volume Search Sonar (TVSS), a 68 kHz cylindrical array capable of 360 degrees multibeam imaging in the vertical plane perpendicular to its axis. The data are processed to form acoustic backscatter images of the seafloor, sea surface, and horizontal and vertical planes in the volume, which are used to attribute nonhomogeneous spatial distributions of zooplankton, fish, bubbles and bubble clouds, and multiple boundary interactions to the observed backscatter amplitude statistics. Three component Rayleigh mixture probability distribution functions (PDFs) provided the best fit to the empirical distribution functions of seafloor acoustic backscatter. Sea surface and near-surface volume acoustic backscatter PDFs are better described by Rayleigh mixture or log-normal distributions, with the high density portion of the distributions arising from boundary reverberation, and the tails arising from nonhomogeneously distributed scatterers such as bubbles, fish, and zooplankton. PDF fits to the volume and near-surface acoustic backscatter data are poor compared to PDF fits to the boundary backscatter, suggesting that these data may be better described by mixture distributions with component densities from different parametric families. For active sonar target detection, the results demonstrate that threshold detectors which assume Rayleigh distributed envelope fluctuations will experience significantly higher false alarm rates in shallow water environments which are influenced by near-surface microbubbles, aggregations of zooplankton and fish, and boundary reverberation.     

Combining Brillouin spectroscopy and laser-SAW technique for elastic property characterization of thick DLC films

Surface Brillouin spectroscopy (SBS) has been widely used for elastic property characterization of thin films. For films thicker than 500 nm, however, the wavelength of surface acoustic wave in the frequency range available for SBS is smaller than film thickness, and the SBS measures only the Rayleigh wave of the film. The laser-SAW technique, on the other hand, measures only the low-frequency portion of the surface acoustic wave dispersion and can estimate only one elastic modulus of the film (typically Young's modulus). In this work, we have combined the two methods to determine both Young's modulus and Poisson's ratio of a diamond-like carbon (DLC) film. It was found that reasonable estimates can be obtained for the longitudinal wave velocity, shear wave velocity, and Young's modulus of the film. The Poisson's ratio, however, still has a relatively large measurement error.