Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni?N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

Electroreduction of CO2 on Single‐Site Copper‐Nitrogen‐Doped Carbon Material: Selective Formation of Ethanol and Reversible Restructuration of the Metal Sites

It is generally believed that CO₂ electroreduction to multi‐carbon products such as ethanol or ethylene may be catalyzed with significant yield only on metallic copper surfaces, implying large ensembles of copper atoms. Here, we report on an inexpensive Cu‐N‐C material prepared via a simple pyrolytic route that exclusively feature single copper atoms with a CuN₄ coordination environment, atomically dispersed in a nitrogen‐doped conductive carbon matrix. This material achieves aqueous CO₂ electroreduction to ethanol at a Faradaic yield of 55 % under optimized conditions (electrolyte: 0.1 m CsHCO₃, potential: ?1.2 V vs. RHE and gas‐phase recycling set up), as well as CO electroreduction to C₂‐products (ethanol and ethylene) with a Faradaic yield of 80 %. During electrolysis the isolated sites transiently convert into metallic copper nanoparticles, as shown by operando XAS analysis, which are likely to be the catalytically active species. Remarkably, this process is reversible and the initial material is recovered intact after electrolysis.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.     

Metal‐Doped Nitrogenated Carbon as an Efficient Catalyst for Direct CO2 Electroreduction to CO and Hydrocarbons

This study explores the kinetics, mechanism, and active sites of the CO₂ electroreduction reaction (CO2RR) to syngas and hydrocarbons on a class of functionalized solid carbon‐based catalysts. Commercial carbon blacks were functionalized with nitrogen and Fe and/or Mn ions using pyrolysis and acid leaching. The resulting solid powder catalysts were found to be active and highly CO selective electrocatalysts in the electroreduction of CO₂ to CO/H₂ mixtures outperforming a low‐area polycrystalline gold benchmark. Unspecific with respect to the nature of the metal, CO production is believed to occur on nitrogen functionalities in competition with hydrogen evolution. Evidence is provided that sufficiently strong interaction between CO and the metal enables the protonation of CO and the formation of hydrocarbons. Our results highlight a promising new class of low‐cost, abundant electrocatalysts for synthetic fuel production from CO₂.     

Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N-doped Carbon Catalysts

Ni,N-doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen-coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile-derived Ni,N-doped carbon electrocatalysts (Ni-PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X-ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square-planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

Highly Efficient CO2 Electroreduction on ZnN4‐based Single‐Atom Catalyst

The electrochemical reduction reaction of carbon dioxide (CO2RR) to carbon monoxide (CO) is the basis for the further synthesis of more complex carbon‐based fuels or attractive feedstock. Single‐atom catalysts have unique electronic and geometric structures with respect to their bulk counterparts, thus exhibiting unexpected catalytic activities. A nitrogen‐anchored Zn single‐atom catalyst is presented for CO formation from CO2RR with high catalytic activity (onset overpotential down to 24 mV), high selectivity (Faradaic efficiency for CO (FE_CO) up to 95 % at ?0.43 V), remarkable durability (>75 h without decay of FE_CO), and large turnover frequency (TOF, up to 9969 h^?1). Further experimental and DFT results indicate that the four‐nitrogen‐anchored Zn single atom (Zn‐N₄) is the main active site for CO2RR with low free energy barrier for the formation of *COOH as the rate‐limiting step.     

High‐Curvature Transition‐Metal Chalcogenide Nanostructures with a Pronounced Proximity Effect Enable Fast and Selective CO2 Electroreduction

A considerable challenge in the conversion of carbon dioxide into useful fuels comes from the activation of CO₂ to CO₂^.? or other intermediates, which often requires precious‐metal catalysts, high overpotentials, and/or electrolyte additives (e.g., ionic liquids). We report a microwave heating strategy for synthesizing a transition‐metal chalcogenide nanostructure that efficiently catalyzes CO₂ electroreduction to carbon monoxide (CO). We found that the cadmium sulfide (CdS) nanoneedle arrays exhibit an unprecedented current density of 212 mA cm^?2 with 95.5±4.0 % CO Faraday efficiency at ?1.2 V versus a reversible hydrogen electrode (RHE; without iR correction). Experimental and computational studies show that the high‐curvature CdS nanostructured catalyst has a pronounced proximity effect which gives rise to large electric field enhancement, which can concentrate alkali‐metal cations resulting in the enhanced CO₂ electroreduction efficiency.     

A Hybrid Co Quaterpyridine Complex/Carbon Nanotube Catalytic Material for CO2 Reduction in Water

Associating a metal‐based catalyst to a carbon‐based nanomaterial is a promising approach for the production of solar fuels from CO₂. Upon appending a Co^II quaterpyridine complex [Co(qpy)]²⁺ at the surface of multi‐walled carbon nanotubes, CO₂ conversion into CO was realized in water at pH 7.3 with 100 % catalytic selectivity and 100 % Faradaic efficiency, at low catalyst loading and reduced overpotential. A current density of 0.94 mA cm^?2 was reached at ?0.35 V vs. RHE (240 mV overpotential), and 9.3 mA cm^?2 could be sustained for hours at only 340 mV overpotential with excellent catalyst stability (89 095 catalytic cycles in 4.5 h), while 19.9 mA cm^?2 was met at 440 mV overpotential. Such a hybrid material combines the high selectivity of a homogeneous molecular catalyst to the robustness of a heterogeneous material. Catalytic performances compare well with those of noble‐metal‐based nano‐electrocatalysts and atomically dispersed metal atoms in carbon matrices.     

Molecular Modification of Single Cobalt Sites Boosts the Catalytic Activity of CO2 Electroreduction into CO

Electroreduction of CO₂ into carbonaceous fuels or industrial chemicals using renewable energy sources is an ideal way to promote global carbon recycling. Thus, it is of great importance to develop highly selective, efficient, and stable catalysts. Herein, we prepared cobalt single atoms (Co SAs) coordinated with phthalocyanine (Co SAs-Pc). The anchoring of phthalocyanine with Co sites enabled electron transfer from Co sites to CO₂ effectively via the π-conjugated system, resulting in high catalytic performance of CO₂ electroreduction into CO. During the process of CO₂ electroreduction, the Faradaic efficiency (FE) of Co SAs-Pc for CO was as high as 94.8 %. Meanwhile, the partial current density of Co SAs-Pc for CO was −11.3 mA cm⁻² at −0.8 V versus the reversible hydrogen electrode (vs RHE), 18.83 and 2.86 times greater than those of Co SAs (−0.60 mA cm⁻²) and commercial Co phthalocyanine (−3.95 mA cm⁻²), respectively. In an H-cell system operating at −0.8 V vs RHE over 10 h, the current density and FE for CO of Co SAs-Pc dropped by 3.2 % and 2.5 %. A mechanistic study revealed that the promoted catalytic performance of Co SAs-Pc could be attributed to the accelerated reaction kinetics and facilitated CO₂ activation.     

Cobalt Single‐Atom Catalysts with High Stability for Selective Dehydrogenation of Formic Acid

Metal–organic framework (MOF)‐derived Co‐N‐C catalysts with isolated single cobalt atoms have been synthesized and compared with cobalt nanoparticles for formic acid dehydrogenation. The atomically dispersed Co‐N‐C catalyst achieves superior activity, better acid resistance, and improved long‐term stability compared with nanoparticles synthesized by a similar route. High‐angle annular dark‐field–scanning transmission electron microscopy, X‐ray photoelectron spectroscopy, electron paramagnetic resonance, and X‐ray absorption fine structure characterizations reveal the formation of Co^IIN_x centers as active sites. The optimal low‐cost catalyst is a promising candidate for liquid H₂ generation.     

Layer-by-layer enriching active Ni-N3C sites in nickel-nitrogen-carbon electrocatalysts for enhanced CO2-to-CO reduction

Transition metal and nitrogen co-doped carbons (M-N-C) have proven to be promising catalysts for CO₂ electroreduction into CO because of the high activity and selectivity. Effective enrichment of the active transition metal coordinated nitrogen sites is desirable but is challenging for a practical volumetric productivity. Herein, we report four kinds of model electrocatalysts to unveil this issue, which include the NC structures with surface N-functionalities, Ni-N-C_I with one layer of surface Ni-N₃C sites, NC@Ni-N-C_I with surface N-functionalities and underneath Ni-N₃C sites as well as Ni-N-C_II with doubled surface Ni-N₃C sites. The X-ray absorption spectroscopy indicates the coordination configuration of Ni-N₃C. For NC catalysts, when N-doping level increased from 3.5 at% to 8.4 at%, the CO partial current density increased from below 0.1 mA/cm² to 3 mA/cm². Introducing one layer of Ni-N₃C onto the NC structures leads to a 54 times higher CO partial current density than that of NC, in the meantime the FE_CO is 66 times higher. Furthermore, doubling the density of surface Ni-N₃C sites by a layer-by-layer method doubles the CO partial current density (j_CO), indicating its potential to achieve a high density of active coordinated sites and current densities.     

Economizing on Precious Metals in Three‐Way Catalysts: Thermally Stable and Highly Active Single‐Atom Rhodium on Ceria for NO Abatement under Dry and Industrially Relevant Conditions**

We show for the first time that atomically dispersed Rh cations on ceria, prepared by a high‐temperature atom‐trapping synthesis, are the active species for the (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh^I complexes capable of catalyzing the dry (CO+NO) reaction. The thermally stable Rh cations in 0.1 wt % Rh₁/CeO₂ achieve full NO conversion with a turn‐over‐frequency (TOF) of around 330 h^?1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N₂ with N₂O being the minor product. The presence of water promotes low‐temperature activity of 0.1 wt % Rh₁/CeO₂. In the wet stream, ammonia and nitrogen are the main products above 120 °C. The uniformity of Rh ions on the support, allows us to detect the intermediates of (CO+NO) reaction via IR measurements on Rh cations on zeolite and ceria. We also show that NH₃ formation correlates with the water gas shift (WGS) activity of the material and detect the formation of Rh hydride species spectroscopically.     

Atomic‐Level Insight into Optimizing the Hydrogen Evolution Pathway over a Co1‐N4 Single‐Site Photocatalyst

Knowledge of the photocatalytic H₂ evolution mechanism is of great importance for designing active catalysts toward a sustainable energy supply. An atomic‐level insight, design, and fabrication of single‐site Co₁‐N₄ composite as a prototypical photocatalyst for efficient H₂ production is reported. Correlated atomic characterizations verify that atomically dispersed Co atoms are successfully grafted by covalently forming a Co₁‐N₄ structure on g‐C₃N₄ nanosheets by atomic layer deposition. Different from the conventional homolytic or heterolytic pathway, theoretical investigations reveal that the coordinated donor nitrogen increases the electron density and lowers the formation barrier of key Co hydride intermediate, thereby accelerating H–H coupling to facilitate H₂ generation. As a result, the composite photocatalyst exhibits a robust H₂ production activity up to 10.8 μmol h⁻¹, 11 times higher than that of pristine counterpart.     

Electroreduction of CO2 to Formate with Low Overpotential using Cobalt Pyridine Thiolate Complexes

Electrocatalytic CO₂ reduction to value‐added products provides a viable alternative to the use of carbon sources derived from fossil fuels. Carrying out these transformations at reasonable energetic costs, for example, with low overpotential, remains a challenge. Molecular catalysts allow fine control of activity and selectivity via tuning of their coordination sphere and ligand set. Herein we investigate a series of cobalt(III) pyridine‐thiolate complexes as electrocatalysts for CO₂ reduction. The effect of the ligands and proton sources on activity was examined. We identified bipyridine bis(2‐pyridinethiolato) cobalt(III) hexaflurophosphate as a highly selective catalyst for formate production operating at a low overpotential of 110 mV with a turnover frequency (TOF) of 10 s^?1. Electrokinetic analysis coupled with density functional theory (DFT) computations established the mechanistic pathway, highlighting the role of metal hydride intermediates. The catalysts deactivate via the formation of stable cobalt carbonyl complexes, but the active species could be regenerated upon oxidation and release of coordinated CO ligands.     

An Enzyme‐Mimicking Single‐Atom Catalyst as an Efficient Multiple Reactive Oxygen and Nitrogen Species Scavenger for Sepsis Management

Sepsis, characterized by immoderate production of multiple reactive oxygen and nitrogen species (RONS), causes high morbidity and mortality. Despite progress made with nanozymes, efficient antioxidant therapy to eliminate these RONS remains challenging, owing largely to the specificity and low activity of exploited nanozymes. Herein, an enzyme‐mimicking single‐atom catalyst, Co/PMCS, features atomically dispersed coordinatively unsaturated active Co‐porphyrin centers, which can rapidly obliterate multiple RONS to alleviate sepsis. Co/PMCS can eliminate O₂^.? and H₂O₂ by mimicking superoxide dismutase, catalase, and glutathione peroxidase, while removing ^.OH via the oxidative‐reduction cycle, with markedly higher activity than nanozymes. It can also scavenge ^.NO through formation of a nitrosyl–metal complex. Eventually, it can reduce proinflammatory cytokine levels, protect organs from damage, and confer a distinct survival advantage to the infected sepsis mice.     

Low‐Coordinated Edge Sites on Ultrathin Palladium Nanosheets Boost Carbon Dioxide Electroreduction Performance

Electrochemical conversion of carbon dioxide (CO₂) to value‐added products is a possible way to decrease the problems resulting from CO₂ emission. Thanks to the eminent conductivity and proper adsorption to intermediates, Pd has become a promising candidate for CO₂ electroreduction (CO₂ER). However, Pd‐based nanocatalysts generally need a large overpotential. Herein we describe that ultrathin Pd nanosheets effectively reduce the onset potential for CO by exposing abundant atoms with comparatively low generalized coordination number. Hexagonal Pd nanosheets with 5 atomic thickness and 5.1 nm edge length reached CO faradaic efficiency of 94 % at ?0.5 V, without any decay after a stability test of 8 h. It appears to be the most efficient among all of Pd‐based catalysts toward CO₂ER. Uniform hexagonal morphology made it reasonable to build models and take DFT calculations. The enhanced activity originates from mainly edge sites on palladium nanosheets.     

Densely Packed,Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlling the selectivity in electrochemical CO₂ reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO₂ electroreduction, most Sn‐based catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO₂ reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultra‐small size of the nanoparticles (2.6 nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix.     

Densely Packed,Ultra Small SnO Nanoparticles for Enhanced Activity and Selectivity in Electrochemical CO2 Reduction

Controlling the selectivity in electrochemical CO₂ reduction is an unsolved challenge. While tin (Sn) has emerged as a promising non‐precious catalyst for CO₂ electroreduction, most Sn‐based catalysts produce formate as the major product, which is less desirable than CO in terms of separation and further use. Tin monoxide (SnO) nanoparticles supported on carbon black were synthesized and assembled and their application in CO₂ reduction was studied. Remarkably high selectivity and partial current densities for CO formation were obtained using these SnO nanoparticles compared to other Sn catalysts. The high activity is attributed to the ultra‐small size of the nanoparticles (2.6 nm), while the high selectivity is attributed to a local pH effect arising from the dense packing of nanoparticles in the conductive carbon black matrix.     

Enhanced Carbon Dioxide Electroreduction to Carbon Monoxide over Defect‐Rich Plasma‐Activated Silver Catalysts

Efficient, stable catalysts with high selectivity for a single product are essential if electroreduction of CO₂ is to become a viable route to the synthesis of industrial feedstocks and fuels. A plasma oxidation pre‐treatment of silver foil enhances the number of low‐coordinated catalytically active sites, which dramatically lowers the overpotential and increases the activity of CO₂ electroreduction to CO. At −0.6 V versus RHE more than 90 % Faradaic efficiency towards CO was achieved on a pre‐oxidized silver foil. While transmission electron microscopy (TEM) and operando X‐ray absorption spectroscopy showed that oxygen species can survive in the bulk of the catalyst during the reaction, quasi in situ X‐ray photoelectron spectroscopy showed that the surface is metallic under reaction conditions. DFT calculations reveal that the defect‐rich surface of the plasma‐oxidized silver foils in the presence of local electric fields drastically decrease the overpotential of CO₂ electroreduction.