金纳米颗粒在等离子体共振光催化剂中的作用机理研究

金纳米颗粒在等离子体共振光催化剂中具有多种不同的作用机理。本文采用溶胶-凝胶法合成了氮/碳共掺杂超薄二氧化钛(D-TiO₂)包覆的SiO₂/Au/D-TiO₂三明治型及SiO₂/D-TiO₂核壳纳米结构材料,对金纳米颗粒在含有可见光响应型半导体的等离子体共振光催化剂光催化分解水制氢反应中的作用机理进行了探索。研究结果表明,在该等离子体共振光催化剂的光催化反应过程中,金纳米颗粒同时体现出肖特基效应和等离子体共振效应作用机理,且作用机理与光生载流子的多少以及金纳米颗粒的负载量有关。负载量较低时,金纳米颗粒的作用机理与光生载流子的多少有关。而在高负载量条件下,金纳米颗粒在可见光照射下主要表现出肖特基效应对光催化活性的影响。     

Gold-Titanium(IV) Oxide Plasmonic Photocatalysts Prepared by a Colloid-Photodeposition Method: Correlation Between Physical Properties and Photocatalytic Activities

Colloidal gold (Au) nanoparticles were prepared and successfully loaded on titanium(IV) oxide (TiO(2)) without change in the original particle size using a method of colloid photodeposition operated in the presence of a hole scavenger (CPH). The prepared Au nanoparticles supported on TiO(2) showed strong photoabsorption at around 550 nm due to surface plasmon resonance (SPR) of Au and exhibited a photocatalytic activity in mineralization of formic acid in aqueous suspensions under irradiation of visible light (>ca. 520 nm). A linear correlation between photocatalytic activity and the amount of Au loaded, that is, the number of Au nanoparticles, was observed, indicating that the activity of Au/TiO(2) plasmonic photocatalysts can be controlled simply by the amount of Au loading using the CPH method and that the external surface area of Au nanoparticles is a decisive factor in mineralization of formic acid under visible light irradiation. Very high reaction rates were obtained in samples with 5 wt % Au or more, although the rate tended to be saturated. The CPH method can be widely applied for loading of Au nanoparticles on various TiO(2) supports without change in the original size independent of the TiO(2) phase. The rate of CO(2) formation also increased linearly with increase in the external surface area of Au. Interestingly, the TiO(2) supports showed different slopes of the plots. The slope is important for selection of TiO(2) as a material supporting colloidal Au nanoparticles.     

Au Nanoparticles Loaded on Hollow TiO2 Microspheres with (001) Exposed Facets: a Strategy for Promoting Photocatalytic Performance

Au nanoparticles loaded TiO₂ hollow microspheres with exposed (001) facets(Au-HTFs) were synthesized through template-free hydrothermal process combined with a chemical reduction role. Au-HTFs displayed excellent photocatalytic activity in catalyzing oxidization reaction in organic pollutant system, which originates from the synergistic effect of the reactive (001) facets and Au nanoparticles with a wide range of absorption in visible region based on localized surface plasmon resonance effect. The unique synergistic effect could largely increase the photocatalytic performance resulting from the improvements of both the visible light aborption and the recombination of electron-hole pairs. Our findings revealed that among Au-HTFs with different Au loading percentages, Au-HTFs with 2%(mass fraction) Au loading possessed the superior photocatalytic activity.     

Electrodeposited Cu‐Au Alloy Nanoparticles for Uric Acid Electrochemical Biosensor with Quick Response

A uric acid (UA) electrochemical biosensor based on the Cu‐Au alloy nanoparticles (NPs) and uricase was developed. The electrodeposition technique of Cu‐Au alloy NPs was selected to be a convenient potentiostatic method at –0.8 V in a single solution containing both Au(III) and Cu²⁺. Cyclic voltammetry and scanning electron microscopy proved the successful deposition of Cu‐Au alloy NPs. EIS demonstrated the good conductivity of Cu‐Au alloy NPs. The enzyme was immobilized on the surface of Cu‐Au alloy NPs modified electrode by casting with chitosan solution. The ultimate biosensor showed linear amperometric response towards UA in the concentration range of 3.0 to 26.0 μM with a detection limit of 0.8 μM. The main feature of the biosensor was its short response time, which was attributed to the good conductivity of Cu‐Au alloy NPs. Furthermore, the biosensor could avoid the interference of ascorbic acid and oxygen.     

Gold nanoparticles on a thiol-functionalized silica network for ascorbic acid electrochemical detection in presence of dopamine and uric acid

A simple preparation methodology able to stabilize gold nanoparticles and to obtain an electrode which detects ascorbic acid, uric acid, and dopamine by different techniques is presented. A 3-mercaptopropyl-functionalized silica network was synthesized using the sol–gel method. Gold nanoparticles (nAu) were immobilized on the material at synthesis by adding a sol of these previously prepared particles to the reaction mixture. The electrochemical behavior of the SiO₂/MPTS/Au carbon paste electrode was studied using cyclic voltammetry in the presence of a hexacyanoferrate probe molecule. The presence of nAu in the functionalized silica network changes the electrochemical characteristics of the material, favoring the electron transfer process of this complex ion. The SiO₂/MPTS/Au electrode was proven to be an efficient tool in the simultaneous determination of ascorbic acid (H₂AA), dopamine (DA), and uric acid (UA) using square wave voltammetry techniques. With the nAu on the electrode, an increase in the peak current related to the redox process of the H₂AA, DA, and UA was observed. The separations of the anodic peak potentials between DA/H₂AA and UA/H₂AA were 310 and 442?mV, respectively. The results obtained show that the SiO₂/MPTS/Au electrode can be used in the simultaneous determination of H₂AA, DA, and UA.     

Titania supported gold nanoparticles as photocatalyst

This Perspective is focused on the photocatalytic activity of gold nanoparticles supported on titania (Au/TiO(2)). Titania is the most widely used photocatalyst, but its limited activity under visible light irradiation has motivated the quest for modified titania materials absorbing visible light. The review starts by justifying how doping with metallic elements is a related strategy, but different, to that leading to the use of Au/TiO(2) in photocatalysis. Data supporting and confirming the photoactivity of gold nanoparticles in colloidal solutions are briefly presented to justify the possibility of gold photosensitization of titania by electron injection into the conduction band. After describing the most common procedures used to prepare Au/TiO(2), the central part of this article is focused on the photocatalytic activity reported for Au/TiO(2) for hydrogen generation, dye decoloration, phenol decomposition and carboxylic acid degradation, among other processes. Emphasis is given to the role that parameters like Au loading, particle size, surface area, spatial structuring and others play on the photocatalytic activity. One important issue has been to distinguish those reports using visible light from those other in which direct titania excitation by UV light has been used. These Au/TiO(2) photocatalysts can find real applications in the near future for environmental remediation and for hydrogen generation.     

基于纳米CdS对尿酸的光催化氧化和铜(Ⅱ)配合物对氧的电催化还原的燃料电池性能

以纳米硫化镉薄膜修饰的铟锡氧化物电极(CdS/ITO)作光阳极, 铜(Ⅱ)配合物[Cu(phen)(L-Trp)·(H₂O)]⁺(phen=1,10-菲啰啉, L-Trp=L-色氨酸)修饰单壁碳纳米管(SWCNTs)电极作阴极, 构建了光催化尿酸(UA)燃料电池, 并研究了其性能及热处理温度的影响. 结果表明, 在40 ℃以下获得的纳米CdS修饰电极在320~550 nm波长区间显现明显的吸收和光伏响应, 在可见光辐射下能光催化氧化UA; 较高温度的热处理(200~300 ℃)却降低了纳米CdS对UA的光催化氧化活性. [Cu(phen)(L-Trp)(H₂O)]⁺/SWCNTs电极在-0.131 V电位下呈现一对准可逆的氧化还原峰, 并能电催化还原O₂和H₂O₂. 此外, 基于UA在CdS/ITO电极上的光催化氧化及O₂在[Cu(phen)(L-Trp)(H₂O)]⁺/SWCNTs电极上的电催化还原, 组装了UA(0.2 mmol/L)燃料电池, 其在可见光照射(0.18 mW/cm²)下产生0.52 V开路电压, 13.08 μA/cm²短路光电流, 在0.41 V下呈现的最大功率密度为4.10 μW/cm².     

Size‐Controlled Synthesis of Highly Monodisperse Gold Nanoparticles without a Size‐Selection and Long Range Ordered 2‐D Arrangement

A simple method is used to control the size of cetyltrimethylammoniumbromide‐protected Au nanoparticles by a reversal micelle in safe organic solvent. These Au nanoparticles can be evolved to highly monodisperse Au nanoparticles capped 1‐dodecanthiol in the 2, 3, and 5 nm diameter by refluxing at～160°C for 7 hours. Their ultraviolet visible spectroscopy (UV‐vis), x‐ray diffraction (XRD, transmission electron microscopy (TEM) showed that all the three different size gold nanoparticles(NPs) displayed high size homogenous properties and easy formed large areas of long ordered two‐dimensional arrangement at the air/solid interface.     

Interactions between water-soluble CdSe quantum dots and gold nanoparticles studied by UV-visible absorption spectroscopy.

The interaction of water-soluble CdSe quantum dots (QDs) with gold (Au) nanoparticles was investigated by ultraviolet visible absorption spectroscopy. The results showed that the aggregation of Au nanoparticles was induced by CdSe QDs. The influences of factors such as the size of Au nanoparticles, acidity, buffer concentration and the concentration ratio of the CdSe QDs to Au nanoparticles were each investigated. The comparison of two different particle sizes (16 and 25 nm) of Au nanoparticles that interact with CdSe QDs in the solution showed that the aggregation of small Au nanoparticles (16 nm) is easier than that of big Au nanoparticles (25 nm). At pH 7.0 phosphate buffer solution (0.02 M), the optimal molar ratio of CdSe:Au is about 3100:1 according to calculations.     

SPR effect of Au nanoparticles on the visible photocatalytic RhB degradation and NO oxidation over TiO2 hollow nanoboxes

Three-dimensional (3D) TiO₂ hollow structures have attracted much attention due to their unique properties. However, the large bandgap of (3.2 eV) results in the fact that anatase TiO₂ photocatalyst can only be excited by UV light, which only accounts for 3–5% of the solar energy. On considering that nobel metallatic nanomaterials can harvest visible light due to surface plasmon resonance (SPR) effect, in this paper, three kinds of Au nanoparticles with different morphologies, namely Au nanospheres (Au-NSs), Au nanorods (Au-NRs) and Au nanopentogons (Au-NPs) were prepared and used as photosensitizers to modified TiO₂ hollow nanoboxes (TiO₂-HNBs), aiming to explore high efficient visible-light-responsive photocatalyst. The photoreacitivty of Au/TiO₂-HNBs was evaluated by photoctalytic oxidation of Rhodamine B (RhB) and NO under visible irradiation (λ > 420 nm). It was found that the visible photoreactivity of TiO₂-HNBs was greatly enhanced after modified with Au nanoparticles, and TiO₂-HNBs loaded with Au-NRs exhibit the highest visible photocatalytic activity towards both RhB degradation and NO oxidation. Upon visible irradiation, SPR effect induces the production of hot electrons from the Au nanoparticles, which can further transfer to the conduction band of TiO₂-HNBs to produce superoxide radicals (O₂⁻), resulting in an efficient separation of photo-generated electron-hole pairs. The photoreactivity of Au-NRs/TiO₂-HNBs towards RhB degradation almost keeps unchanged even after recycling used for 5 times, indicating that it is promising to be use in practical applications.     

Alkanethiol-induced structural rearrangements in silica-gold core-shell-type nanoparticle clusters: an opportunity for chemical sensor engineering

Electrostatically bonded SiO2.Au nanoparticle clusters form by reaction of 3-aminopropylsilane-modified SiO2 spheres (470 nm) with citrate-coated gold nanoparticles (9.7 nm) in water. Reaction of the clusters with 0.01 M KBr or HCl solution induces desorption of the gold nanoparticles within minutes. Reaction of the clusters with alkanethiols CnH2n+1SH (n = 2-18) at 80 degrees C causes the gold nanoparticles to form stringlike gold nanoparticle structures for thiols with short alkane groups (n = 2, 3, 4) and hexagonally packed arrays of gold nanoparticles for thiols with long alkane groups (n = 5-18) on the silica surfaces. The structural changes indicate that the bonding between Au and SiO2 nanoparticles has changed from electrostatic to van der Waals. Elemental analyses show that the reaction with hexanethiol does not affect the Au/Si/O composition of the SiO2.Au cluster, and Raman spectra on the hexanethiol-reacted cluster indicate the formation of a thiol SAM on the gold nanoparticles. The thiol-reacted SiO2.Au clusters display characteristic shifts of the absorption maxima in the visible spectra, and there is an inverse relation between these shifts and the lengths of the alkyl groups in the thiols. This relationship can be understood in terms of the free electron model for metals. The use of SiO2.Au nanoparticle clusters as coulometric sensors for the qualitative detection of thiols is discussed.     

Supported noble metal nanoparticles as photo/sono-catalysts for synthesis of chemicals and degradation of pollutants

This review summarizes the utilization of supported noble metal nanoparticles (such as Au/TiO2, Au/ZrO2, Ag/AgCl) as efficient photo/sono-catalysts for the selective synthesis of chemicals and degradation of environmental pollutants. Supported noble metal nanoparticles could efficiently catalyze the conversion of solar energy into chemical energy. Under UV/visible light irradiation, important chemical transformations such as the oxidation of alcohols to carbonyl compounds, the oxidation of thiol to disulfid...     

憎水性三金属纳米粒子的合成、表征及磁性

以磺基琥珀酸二辛酯钠盐(AOT)为表面活性剂,采用反胶束法合成了憎水性CoFe/Au纳米粒子, 利用配体交换、水洗等去除AOT并使纳米粒子分级.采用紫外-可见光谱(UV-Vis)、透射电镜(TEM)、X射线衍射(XRD)、X射线电子能量散射(EDX)及等离子发射光谱 (ICP)等对产物进行了表征,通过超导量子干涉仪(SQIUD)研究了纳米粒子的磁性质.结果表明,反胶束法合成的CoFe/Au三金属纳米粒子具有较好的单分散性和稳定性,平均粒径约为4 nm.当外磁场强度为1.5×10⁴ A/m时,阻塞温度T_b为65 K,温度高于T_b时纳米粒子显示出超顺磁性,低于T_b时呈铁磁性,在5 K时其矫顽力(Hc)达4.67×10⁴ A/m.     

Photocatalytic Activity of Au/TiO2 Photocatalysts for H2 Evolution: Role of the Au Nanoparticles as a Function of the Irradiation Wavelength

An investigation of hydrogen production with a series of Au/TiO₂ photocatalysts reveals that the Au nanoparticles play different roles depending on the wavelength of the light irradiation. Under visible‐light irradiation, the photoactivity is primarily controlled by the intensity of the Au surface plasmon band, whereas under UV irradiation the Au nanoparticles act as co‐catalysts with TiO₂.     

Ag/Au Alloy LSPR Engineering by Co‐deposition of RF‐Sputtering and RF‐PECVD

Silver‐Gold alloy/diamond like carbon (Ag‐Au/DLC) nanocomposite films were prepared by co‐deposition of RF‐sputtering and RF‐PECVD on glass substrates by using acetylene gas and silver‐gold target. The deposition process was carried out at room temperature in one minute with the variable parameters of initial pressures and RF powers. X‐ray diffraction analysis demonstrated the formation of Ag/Au alloy nanoparticles with a face‐centered cubic (FCC) structure. Localized surface plasmon and optical properties of Ag‐Au alloy nanoparticles were studied by UV‐visible spectrophotometry which showed that increasing RF power and initial pressure cause a redshift in all samples. Moreover, the effect of RF power and initial pressure on the size and shape of nanoparticles were studied by 2D Atomic force microscopy images. Energy dispersive X‐ray spectroscopy revealed the formation of Ag‐Au/DLC nanoparticles and the percentages of C, Ag, Au and O in all samples. The applied method for Ag/Au alloy preparation is the one step and low‐cost method which makes the samples ready for sensing application.     

Visible light-excited surface plasmon resonance charge transfer significantly improves the photocatalytic activities of ZnO semiconductor for pollutants degradation

To effectively address environmental pollution, we synthesized Au-loaded ZnO nanocomposites and applied for the photocatalytic degradation of 2-chlorophenol (2-CP) under visible light irradiation. The as-prepared nanophotocatalysts delivered much improved photocatalytic degradation activities as compared to the bare ZnO nanoparticles and 32% of the pollutant was degraded with 2AuZnO in 1 hr. These improved photoactivities are attributed to the extended visible light absorption due to the surface plasmon resonance property of the loaded Au nanoparticles. Moreover, Au nanoparticles played important role in charge separation by inducting excited electrons to the conduction band of ZnO photocatalyst and surface catalysis as confirmed from photoluminescence spectra and amount of the generated hydroxyl radicals. The trapping experiments confirmed that positive holes were the major degrading species during the photocatalytic degradation of 2-CP. This work provides a feasible way to improve the photocatalysis by introducing a proper amount of noble metals over the surface of semiconductor photocatalysts.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Study of Aggregation of Gold Nanoparticles in Chitosan

In this work it is reported the synthesis of gold nanoparticles supported in situ in chitosan by solvated metal atom dispersion technique in order to study the inclusion of Au nanoparticles in the biopolymer matrix. To study their aggregation along time and compare with the synthesis of Au/2-propanol colloid by chemical liquid deposition technique. Studies of Au nanoparticles aggregation along time, supported nanoparticles and colloidal nanoparticles morphology were also carried out. The characterization of Au nanoparticles was performed by transmission electron microscopy, field-emission and scanning electron microscopy, infrared spectroscopy, X-ray diffraction, light scattering and ultraviolet–visible spectroscopy. Metal colloid showed fractal agglomeration type and delay time after the synthesis, the agglomeration size increased to flocculate. Au nanoparticles supported in chitosan showed the same shape as colloids and fractal aggregation was mostly distributed on the matrix.     

Crystalline metallic Au nanoparticle-loaded α-Bi(2)O(3) microrods for improved photocatalysis

Crystalline metallic Au nanoparticles were loaded on α-Bi(2)O(3) microrods (Au/α-Bi(2)O(3)) using an Au deposition-precipitation method. The prepared samples were characterized by scanning electron and transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectroscopy. Upon visible light irradiation, the Au/α-Bi(2)O(3) exhibits much higher photocatalytic activities than the pure α-Bi(2)O(3) for the degradation of Rhodamine B and 2,4-dichlorophenol in aqueous solution. The role of the Au and the paths of electron transport in the photocatalysis of the Au/α-Bi(2)O(3) were investigated and discussed in detail based on the analysis of the photo-generated hydroxyl radicals (˙OH) and hydrogen peroxide (H(2)O(2)) in the visible light irradiated suspension of pure α-Bi(2)O(3) and Au/α-Bi(2)O(3). The result reveals that the Au loaded on α-Bi(2)O(3) plays a critical role in the separation of the electron and hole pairs by accumulating the electrons from the excited α-Bi(2)O(3), which is responsible for the enhanced photocatalytic activity.     

尿酸在聚亚甲基蓝修饰金电极上的电化学及电化学动力学性质

尿酸(Uric acid,UA)是人体内嘌呤核苷酸分解代谢过程中的最终产物.体液中尿酸的含量变化可以充分反映出人体新陈代谢、免疫等机能状况,同时也可间接反映出与嘌呤代谢的有关疾病[1].