A facile route to hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization

In this article, we report a facile route to the preparation of hollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via inverse miniemulsion polymerization at room temperature and under ambient pressure. Water droplets act as a soft template for the formation of hollow structure. Meanwhile, the existence of amphipathic magnetite nanoparticles (MPs) which can assemble at the interface of W/O is favorable to the interfacial polymerization of styrene, ensuring the formation of hollow nanocomposite microspheres. The final products were thoroughly characterized by X‐ray powder diffraction (XRD), fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X‐ray photoelectron spectroscopy (XPS), which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic hysteresis loop measurements revealed that both MPs and hollow nanocomposite microspheres displayed superparamagnetism. The effects of the content of H₂O, sorbitan monooleate (Span 80) and styrene and the dose rate on the morphology of nanocomposite microspheres were studied. Furthermore, the mechanism of the formation of the hollow magnetic microspheres was also discussed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3900–3910, 2008     

A novel preparation of surface-modified paramagnetic magnetite/polystyrene nanocomposite microspheres by radiation-induced miniemulsion polymerization

A novel and facile approach to the preparation of paramagnetic magnetite/polystyrene nanocomposite microspheres by 60Co gamma-ray radiation-induced miniemulsion polymerization is reported. First, we modified the magnetite nanoparticles (MPs) with a Y-shaped surfactant: 12-hexanoyloxy-9-octadecenoic acid (HOA). Nanocomposite microspheres consisting of polystyrene-iron oxide nanoparticles then were prepared by the radiation-induced miniemulsion polymerization of styrene in the presence of HOA-modified MPs using HOA as stabilizer. The final products were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field-emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The effects of the dose rate, the amounts of added hexadecane (HD) and MPs, and the morphology of the final products were studied. We have also studied the polymerization kinetics to prove the miniemulsion polymerization mechanism of the nanocomposite microspheres.     

Nanocomposite particles with core-shell morphology IV: an efficient approach to the encapsulation of Cloisite 30B by poly (styrene-<Emphasis Type="Italic">co</Emphasis>-butyl acrylate) and preparation of its nanocomposite latex via miniemulsion polymerization

In this work, miniemulsion polymerization was applied for encapsulation of Cloisite 30B, an organically modified montmorillonite, inside poly (styrene-co-butyl acrylate) nanocomposite through an efficient and optimized procedure. The primary miniemulsions were prepared by dispersing Cloisite 30B in the monomers mixture (styrene and butyl acrylate) in the presence of sodium dodecyl sulfate and Span 80 as surfactants and hexadecane as costabilizer by using ultrasonication. The stability of both miniemulsion and the obtained latex depends on premixing procedures, time and pulsed cycle of ultrasonication, and more importantly on the applied surfactants. The synthesized products were characterized by dynamic light scattering, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, induced coupled plasma, and Zeta potential measurement. Its prepared film shows an excellent transparency, which is indicative of full exfoliation of Cloisite 30B platelets by poly (styrene-co-butyl acrylate) latex particles through miniemulsion polymerization technique with 73% efficiency. No armored latex particle was observed.     

Fabrication of novel multihollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via water-in-oil-in-water double emulsions

We herein present a novel and simple synthetic strategy for fabricating multihollow superparamagnetic magnetite/polystyrene nanocomposite microspheres via water-in-oil-in-water double emulsions. Amphipathic magnetite nanoparticles surface-modified with oleic acid act as an oil-soluble emulsifier and sodium dodecyl sulfate acts as a water-soluble surfactant in the system. The final products were thoroughly characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and field-emission scanning electron microscopy, which showed the formation of multihollow magnetite/polystyrene nanocomposite microspheres. Preliminary results of magnetic properties of multihollow magnetite/polystyrene microspheres were reported. The effect of the content of amphipathic magnetite nanoparticles on the morphology of nanocomposite microspheres was studied. Furthermore, the mechanism of formation of multihollow magnetic nanocomposite microspheres was also discussed.     

Synthesis of anionic core-shell poly(styrene-<Emphasis Type="Italic">co-N</Emphasis>-isopropylacrylamide) colloids by a two-step surfactant-free emulsion polymerization

The aim of the performed work is to produce anionic core-shell poly(styrene-co-N-isopropylacrylamide) colloids with an N-isopropylacrylamide (NIPAM) content in the range from 5 to 30 mol %. Different batches of poly(styrene-co-NIPAM) colloids (poly(ST-co-NIPAM) colloids) are produced with varying NIPAM mol %, and the produced poly(ST-co-NIPAM) colloids are characterized by dynamic light scattering and scanning electron microscopy. Results show that the produced colloids have a core-shell morphology with a poly(styrene) core and a poly(NIPAM) shell. The swelling ratio of the produced poly(ST-co-NIPAM) colloids is similar to the swelling ratio found for similar poly(ST-co-NIPAM) colloids produced by the two-step seeded polymerization process. The text was submitted by the author in English.     

Preparation of styrene/methacrylic acid copolymer microspheres and their composites with metal particles

 Poly(styrene-co-methacrylic acid) [P(St-co-MAA)] microspheres were prepared by emulsifier-free emulsion copolymerization of St with MAA. Fourier transform IR spectroscopy and elemental analysis were used to study the change in the content of MAA in the microspheres. The results of X-ray photoelectron spectroscopy measurements indicated the presence of carboxylic functionality on the surface of the microspheres. The P(St-co-MAA) metal composite particles were prepared by chemical metal deposition. Transmission electron microscopy observation and X-ray diffraction measurement were used to study the distribution and structure of the metal particles deposited. Received: 15 September 1999 Accepted: 24 December 1999     

Preparation of styrene/acrylonitrile copolymer microspheres and their composites with metal particles

 Monodispersed poly(styrene-co-acrylonitrile) [P(St-co-AN)] microspheres were prepared by emulsifier-free emulsion copolymerization of St with AN. Fourier transform IR spectroscopy and elemental analysis were used to measure the content of AN in the poly(St-co-AN) microspheres. X-ray photoelectron spectroscopy (XPS) measurements indicated the presence of an AN unit on the surface of the microspheres. The combined results of the elemental analysis and the XPS measurements showed that the copolymer on the surface of the P(St-co-AN) particles was rich in AN compared with that in the interior of the particles. P(St-co-AN)–metal composite particles were prepared by chemical metal deposition. The addition of nickel could improve the distribution of cobalt on surface of the polymer microspheres. The preparation of polymer–bimetal composite particles was tried. Transmission electron microscopy and XRD were used to study the distribution and structure of the deposited metal particles. Received: 30 June 1999/Accepted in revised form: 16 September 1999     

Synthesis of snowman‐like magnetic/nonmagnetic nanocomposite asymmetric particles via seeded emulsion polymerization initiated by γ‐ray radiation

We report on the synthesis of snowman‐like magnetic/nonmagnetic nanocomposite asymmetric particles (SMNAPs) via seeded emulsion polymerization initiated by γ‐ray radiation. In situ formation of magnetite in the presence of the emulsified poly(styrene‐divinylbenzene‐acrylic acid) microspheres affords raspberry‐like magnetic nanocomposite particles, which are used as seeds for further seeded emulsion polymerization induced by γ‐ray radiation. We study the effect of the kind of surfactant, the kind and content of second monomer, and the content of swelling agent on the morphologies of the final nanocomposite particles. It is found that SMNAPs can be fabricated in high yield using 12‐acryloxy‐9‐octadecenoic acid as the surfactant and styrene as the second monomer with the addition of 2‐butanone (a swelling agent). The as‐synthesized SMNAPs may serve as magnetically controllable solid surfactants to stabilize O/W immiscible mixtures, which preferentially orientated at the interface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Monodisperse thermosensitive particles prepared by emulsifier-free emulsion polymerization with microwave irradiation

The emulsifier-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAAm) was successfully carried out with microwave irradiation, and the monodisperse thermoresponsive poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAAm)) particles with diameters in the range 100–130 nm were prepared. The morphology, size and size distribution of the poly(St-co-NIPAAm) particles were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and photon correlation spectroscopy (PCS), respectively. The results showed that poly(St-co-NIPAAm) particles had spherical morphology, and the poly(St-co-NIPAAm) particles prepared by emulsifier-free emulsion polymerization with microwave irradiation were smaller, more uniform than those obtained with conventional heating. The hydrodynamic diameters of poly(St-co-NIPAAm) particles were decreased as the temperature increased from 25 °C to 40 °C, and poly(St-co-NIPAAm) particles collapsed remarkably at 32 °C, which is the lower critical solution temperature of the poly(N-isopropylacrylamide). The morphology of the assembled poly(St-co–NIPAAm) particles was observed by SEM, it was found that monodisperse poly(St-co-NIPAAm) particles could assemble to form the two-dimensional order structures.     

Further insight into the mechanism of poly(styrene‐co‐methyl methacrylate) microsphere formation

Polymeric microspheres have been used in a broad range of applications from chromatographic separation techniques to analysis of air flow over aerodynamic surfaces. The preparation of microspheres from many polymer families has consequently been extensively studied using a variety of synthetic approaches. Although there are a myriad of polymeric microsphere synthesis methods, free‐radical initiated emulsion polymerization is one of the most common techniques. In this work, poly(styrene‐co‐methyl methacrylate) microspheres were synthesized via surfactant‐free emulsion polymerization. The effects of co‐monomer composition and addition time on particle size distribution, particle formation, and particle morphology were investigated. Particles were characterized using dynamic light scattering and scanning electron microscopy to gain further insight into particle size and size distributions. Reaction kinetics were analyzed through consideration of characterization results. A particle formation mechanism for poly(styrene‐co‐methyl methacrylate) microspheres was proposed based on characterization results and known reaction kinetics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2249–2259     

ABA triblock copolymers with pendant hydroxyl groups prepared by controlled cationic polymerization and their use as delivery carrier for paclitaxel

To improve the hydrophilicity of poly(styrene-b-isobutylene-b-styrene) (SIBS), this study focuses on the synthesis of novel functional ABA triblock copolymer thermoplastic elastomers (TPEs) with polyisobutylene (PIB) as rubbery segments. The precursor poly{(styrene-co-4-[2-(tert-butyldimethylsiloxy) ethyl]styrene)-b-isobutylene-b-(styrene-co-4-[2-(tert-butyldimethylsiloxy)ethyl]styrene)}(P(St-co-TBDMES)-PIB-P(St-co-TBDMES)) triblock copolymer was first synthesized by living sequential cationic copolymerization of isobutylene (IB) with styrene (St) and 4-[2-(tert-butyldimethylsiloxy) ethyl]styrene (TBDMES) using 1,4-di(2-chloro-2-propyl)benzene (DiCumCl)/titanium tetrachloride (TiCl₄)/2,6-di-tert-butylpyridine (DtBP) as the initiating system. Then, P(St-co-TBDMES)-PIB-P(St-co-TBDMES) was hydrolyzed in the presence of tetra-butylammonium fluoride to yield poly{[styrene-co-4-(2-hydroxyethyl)styrene]-bisobutylene-b-[styrene-co-4-(2-hydroxyethyl)styrene]} (P(St-co-HOES)-PIB-P(St-co-HOES)) with pendant hydroxyl groups. P(St-co-HOES)-PIB-P(St-co-HOES) used as the paclitaxel carrier was also investigated in this study. Comparing with SIBS, P(St-co-HOES)-PIB-P(St-co-HOES) has exhibited better compatibility with paclitaxel and higher release rate.     

Preparation of hollow composite spheres with raspberry‐like structure based on hydrogen‐bonding interaction

The hollow composite spheres with a raspberry‐like structure were prepared by a self‐assemble heterocoagulation based on the inter‐particle hydrogen‐bonding interaction between the amide groups of hollow poly (N,N′‐methylenebisacrylamide‐co‐N‐isopropyl acrylamide) (P(MBA‐co‐NIPAAm)) microspheres and the carboxylic acid groups of poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA)) nanoparticles, in which P(EGDMA‐co‐MAA) nanoparticle acted as the corona and the hollow P(MBA‐co‐NIPAAm) microsphere behaved as the core. The control coverage of the corona particles on the surface of hollow core microspheres of P(MBA‐co‐NIPAAm)/P(EGDMA‐co‐MAA) hollow composite sphere was studied in detail through adjustment of the mass ratio between the core and corona particles. The effect of the pH on the stability of the raspberry‐like hollow spheres was investigated. The polymer particles and the resultant heterocoagulated raspberry‐like hollow spheres were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Copyright © 2008 John Wiley & Sons, Ltd.     

Adsorption of poly(N-isopropylacrylamide-co-4-vinylpyridine) onto core-shell poly(styrene-co-methylacrylic acid) microspheres

Adsorption of the thermoresponsive copolymer of poly(N-isopropylacrylamide-co-4-vinylpyridine) (PNIPAM-co-P4VP) onto the core-shell microspheres of poly(styrene-co-methylacrylic acid) (PS-co-PMAA) is studied. The core-shell PS-co-PMAA microspheres are synthesized by one-stage soap-free polymerization in water. The copolymer of PNIPAM-co-P4VP is synthesized by free radical polymerization of N-isopropylacrylamide and 4-vinylpyridine in the mixture of DMF and water using K₂S₂O₈ as initiator. Adsorption of PNIPAM-co-P4VP onto the core-shell PS-co-PMAA microspheres results in formation of the composite microspheres of PS/PMAA-P4VP/PNIPAM. The driven force to adsorb the copolymer of P4VP-co-PNIPAM onto the core-shell PS-co-PMAA microspheres is ascribed to hydrogen-bonding and electrostatic affinity between the P4VP and PMAA segments. The resultant composite microspheres of PS/PMAA-P4VP/PNIPAM with surface chains of PNIPAM are thermoresponsive in water and show a cloud-point temperature at about 33 °C.     

One‐stage synthesis of narrowly dispersed polymeric core‐shell microspheres

A method of one‐stage soap‐free emulsion polymerization to synthesize narrowly dispersed core‐shell microspheres is proposed. Following this method, core‐shell microspheres of poly(styrene‐co‐4‐vinylpyridine), poly(styrene‐co‐methyl acrylic acid), and poly[styrene‐co‐2‐(acetoacetoxy)ethyl methacrylate‐co‐methyl acrylic acid] are synthesized by one‐stage soap‐free emulsion polymerization of a mixture of one or two hydrophobic monomers and a suitable hydrophilic monomer in water. The effect of the molar ratio of the hydrophobic monomer to the hydrophilic one on the size, the core thickness, and the shell thickness of the core‐shell microspheres is discussed. The molar ratio of the hydrophobic and hydrophilic monomers and the hydrophilicity of the resultant oligomers of the hydrophilic monomer are optimized to synthesize narrowly dispersed core‐shell microspheres. A possible mechanism of one‐stage soap‐free emulsion polymerization to synthesize core‐shell microspheres is suggested and coagglutination of the oligomers of the hydrophilic monomers on the hydrophobic core is considered to be the key to form core‐shell microspheres. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1192–1202, 2008     

Synthesis of monodisperse hydroxyl-containing polystyrene via chemical modification

A facile synthesis of linear monodisperse hydroxyl-containing polystyrene, poly{styrene-co-[p-(1-hydroxyethyl)styrene]} and poly{styrene-co-[p-(2-hydroxypropan-2-yl)styrene]}, was carried out via chemical modification of polystyrene by a two-step procedure, i. e. monodisperse polystyrene was acetylated under mild conditions, followed by processes of reduction with LiAlH₄ and addition with CH₃MgBr, respectively. ¹H NMR and FTIR spectra showed that in both cases, the reaction of acetyl to hydroxyl is complete. Sizeexclusion chromatography demonstrated that both molecular weight and monodispersity of the final products were basically unchanged.     

Synthesis and characterization of poly(styrene-co-methyl methacrylate)/layered double hydroxide nanocomposites via in situ polymerization

Intercalated poly(styrene-co-methyl methacrylate)/layered double hydroxide nanocomposites (PS-PMMA/LDH-B) have been synthesized by the in situ bulk multistep polymerization of styrene and methyl methacrylate in the presence of the Ca-Al layered double hydroxide, previously modified by the incorporation of benzoate anions [Ca₄Al₂(OH)₁₂(C₆H₅COO)₂·xH₂O, LDH-B]. Nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). XRD and TGA results pointed to the successful incorporation of the LDH-B within the copolymer matrix. XRD results indicated that the characteristic layered structure of the LDH-B had disappeared due to disordering. TEM analysis confirmed that LDH-B was partially dispersed within the matrix forming a structure with alternating matrix-particle regions, where particles appear in a form of intercalated nanocomposite structure. TGA results showed improved thermal properties in comparison to the neat PS-PMMA copolymer.     

“Living” free radical copolymerization of styrene and N-vinylcarbazole

Poly[styrene-co-(N-vinylcarbazole)] copolymers with controlled molecular weights and narrow polydispersities were synthesized by nitroxide-mediated “living” free radical copolymerization using an initiator/capping agent system consisting of benzoyl peroxide (BPO) and the stable nitroxyl radical 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO). The copolymerization behaves in a “living” fashion and allows the synthesis of poly[styrene-co-(N-vinylcarbazole)]/polystyrene block copolymers via a controlled chain-extension reaction of the prepared copolymers with styrene.     

Novel one-step route for synthesizing CdS/polystyrene nanocomposite hollow spheres

CdS/polystyrene nanocomposite hollow spheres with diameters between 240 and 500 nm were synthesized under ambient conditions by a novel microemulsion method in which the polymerization of styrene and the formation of CdS nanoparticles were initiated by gamma-irradiation. The product was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA), which show the walls of the hollow spheres are porous and composed of polystyrene containing homogeneously dispersed CdS nanoparticles. The quantum-confined effect of the CdS/polystyrene nanocomposite hollow spheres is confirmed by the ultraviolet-visible (UV-vis) and photoluminescent (PL) spectra. We propose that the walls of these nanocomposite hollow spheres originate from the simultaneous synthesis of polystyrene and CdS nanoparticles at the interface of microemulsion droplets. This novel method is expected to produce various inorganic/polymer nanocomposite hollow spheres with potential applications in the fields of materials science and biotechnology.     

Fast reversed‐phase liquid chromatographic separation of proteins by flow‐through poly(styrene‐co‐divinylbenzene) microspheres

With the explosive growth of the bioscience and biopharmaceuticals, the demand for high efficient analysis and separation of proteins is urgent. High‐performance liquid chromatography is an appropriate technology for this purpose, and the stationary phase is the kernel to the separation efficiency. In this study, flow‐through poly(styrene‐co‐divinylbenzene) microspheres characteristic of the binary pores, i.e. flow‐through pores and mesopores, were synthesized; this special porous structure would benefit the convective mass transfer while guarantee the high specific surface area. Owing to the hydrophobic nature, poly(styrene‐co‐divinylbenzene) microspheres were suitable as the reversed‐phase stationary phase for separation of proteins. For the high permeability of the poly(styrene‐co‐divinylbenzene) microspheres packed column, fast separation of the studied six proteins in ～2 min was achieved. The recoveries of studied proteins were acceptable in the range of 79.0–99.4%. The proposed column had good pH stability of 1–13 and repeatability. Moreover, the column was applied for egg white fast separation, further demonstrating its applicability for complex bio‐sample separation. The flow‐through poly(styrene‐co‐divinylbenzene) microspheres were promising for fast separation of large molecules.     

Synthesis of SiO2/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres via miniemulsion polymerization

A series of SiO₂/poly(styrene‐co‐butyl acrylate) nanocomposite microspheres with various morphologies (e.g., multicore–shell, normal core–shell, and raspberry‐like) were synthesized via miniemulsion polymerization. The results showed that the morphology of the composite latex particles was strongly influenced by the presence or absence of the soft monomer (butyl acrylate), the particle sizes of the silica, and the emulsifier concentrations. The incorporation of the soft monomer helped in forming the multicore–shell structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3202–3209, 2006