Utilization of 2,6-bis(2-benzimidazolyl)pyridine to detect toxic benzene metabolites

The tridentate ligand 2,6-bis(2-benzimidazolyl)pyridine has the ability to detect toxic benzene metabolites such as phenol, hydroquinone, resorcinol, catechol and p-benzoquinone by simple techniques like UV/vis and fluorescence spectroscopy. The formation of a stable supramolecular complex between 2,6-bis(2-benzimidazolyl)pyridine and hydroquinone was confirmed by X-ray analysis.     

Iron Incorporated Mesoporous Molecular Sieves Synthesized by a Microwave-Hydrothermal Process and Their Application in Catalytic Oxidation

Fe-FSM-16 and Fe-containing mesoporous materials (Fe-JLU-15) prepared by using semifluorinated surfactant as a template, have been synthesized by microwave-hydrothermal (M-H) process and characterized by several spectroscopic techniques. The catalytic activity of these materials was tested for the phenol hydroxylation and wet phenol oxidation with H₂O₂ under mild reaction conditions. The effect of pH, H₂O₂/PhOH molar ratio and stability of the catalyst on the oxidation process was also investigated. Phenol oxidation and H₂O₂ decomposition show that the Fe-JLU-15 is more active than Fe-FSM-16 and more stable in aqueous solution. The total amount of dissolved iron is less than 5 wt% of the iron initially contained in the catalyst. In phenol hydroxylation, these two solids can effectively catalyze the phenol hydroxylation. Catechol and hydroquinone were observed as the major products, with a difference in the product distribution for these solids. The Fe-JLU-15 has a high selectivity for catechol (63.5 % phenol conversion, CAT/HQ = 2.7) while the Fe-FSM-16 shows a high selectivity for hydroquinone (56.8 % phenol conversion, CAT/HQ < 1) under the same reaction conditions.     

A polymer-supported diacetatobis(2-quinolylbenzimidazole)copper(II) complex as an efficient catalyst for oxidation of alcohols with tert-butyl hydroperoxide

A polymer-supported diacetatobis(2-quinolylbenzimidazole)copper(II) complex [PS–(QBIM)₂Cu(II)] was synthesized by functionalization of chloromethylated polystyrene cross-linked with 6.5 % divinyl benzene with 2-(2′-quinolyl)benzimidazole and subsequent treatment with Cu(OAc)₂ in methanol. The complex was characterized by physical, analytical and spectroscopic techniques. Electronic and ESR spectra, together with magnetic susceptibility measurements, indicated that the complex was paramagnetic with distorted octahedral geometry around the copper. The complex was found to be active toward oxidation of various alcohols including phenol, benzyl alcohol and cyclohexanol using 70 % aqueous tert-butyl hydroperoxide under mild conditions. Under the optimized reaction conditions, cyclohexanol gave 100 % conversion to cyclohexanone, benzyl alcohol gave 98 % yield of benzaldehyde and phenol gave 89 % yield of catechol and 4 % of hydroquinone. The complex was recycled five times without much loss in catalytic activity.     

Optical fiber spectroelectrochemical device for detection of catechol at press-transferred single-walled carbon nanotubes electrodes

A new long-optical-pathway spectroelectrochemical cell for absorptometric measurements in the UV–Vis region was developed. This cell consists of two optical fibers brought face to face and fixed on the working electrode support. As a proof of concept, the spectroelectrochemical cell was applied to the determination of catechol using a press-transferred single-walled carbon nanotube film as the working electrode. Voltabsorptometry was demonstrated to be very helpful in understanding the mechanism of catechol oxidation. The experiments showed that the main oxidation product is o-benzoquinone, but other soluble side products are also observed. Multivariate calibration explains the selection of 390 nm as the best wavelength for the univariate absorptometric determination of catechol, avoiding the interference of oxidation side products. Catechol was quantified using both the electrochemical and the spectroscopic signal, demonstrating that this hybrid technique is an autovalidated analytical method. Dual detection of catechol was also carried out using amperometric spectroelectrochemistry. Finally, spectroelectrochemistry was used to quantify catechol in the presence of hydroquinone.     

Degradation of substituted phenols with different oxygen sources catalyzed by Co(II) and Cu(II) phthalocyanine complexes

Research on substituted phenol degradations has received substantial attention. In this work, effective Co(II) and Cu(II) phthalocyanine complexes as catalysts were studied to degrade toxic phenols to harmless products. The effect of various process parameters, such as initial concentration of phenol, catalyst, oxygen sources, and temperature on the degradation reaction was investigated to achieve maximum degradation efficiency. The catalytic activities of Co(II) and Cu(II) phthalocyanines were evaluated for oxidation of phenolic compounds such as p-nitrophenol, o-chlorophenol, 2,3-dichlorophenol, and m-methoxyphenol. Co(II) phthalocyanine displayed good catalytic performance in degradation of 2,3-dichlorophenol to 2,3-dichlorobenzaldehyde and 2,3-dichloro-1,4-benzoquinone with the highest TON and TOF values within 3?h at 50?°C. The fate of catalyst during the degradation process was followed by UV–Vis spectroscopy.     

Electrochemical pyridination of hydroquinone in aqueous solution

Abstract  

Electrochemical oxidation of hydroquinone was studied in the presence of pyridine and 4-methylpyridine as nucleophiles in aqueous solution. The results indicate the participation of electrochemically generated p-benzoquinone in Michael addition reaction with pyridine and 4-methylpyridine, converting it to pyridinated compounds.     

The interaction between polymerization initiators and inhibitors in solution—IV: The reaction of benzoyl peroxide with hydroquinone in solution

The reaction between benzoyl peroxide and hydroquinone in a wide variety of solvents has been investigated by isolation and identification of the products. Benzoic acid, p-benzoquinone and benzoyloxy derivatives of p-benzoquinone are obtained under all conditions. Their relative amounts are largely determined by the molar ratios of the reactants and the nature of the solvent. In strongly polar solvents of high solvation power, p-benzoquinone is formed in preference to its derivatives. Nevertheless, the yield of 2,5-dibenzoyloxy p-benzoquinone reaches a maximum in acrylonitrile. Only in this solvent, at equal molar ratios of reactants, is full substitution in the hydroquinone nucleus achieved with the formation of tetrabenzoyloxy hydroquinone. These facts, together with the partial polymerization of acrylonitrile at room temperature at slightly higher peroxide/hydroquinone ratios and the complete suppression of the polymerization when perchloric acid is added, could be explained by a heterolytic mechanism involving the formation and controlled separation of ion pairs derived from the reactants.     

Ozonolysis of phenols in aqueous solution

In the ozonolysis of phenol in aqueous solution at pH 3, 7 and 10 the following products were quantified: catechol, hydroquinone, 1,4-benzoquinone, cis,cis-muconic acid, H2O2, 2,4-dihydroxybiphenyl and 4,4-dihydroxybiphenyl. At pH 10, material balance (products vs. phenol consumption) is obtained. Singlet dioxygen, O2(1 delta g), and .OH are formed as short-lived intermediates. The precursor of the latter, O3.-, and a phenoxyl radical is suggested to arise from electron transfer from phenol/phenolate to ozone. Addition of .OH to phenol gives rise to dihydroxycyclohexadienyl radicals which add dioxygen and eliminate HO2. thereby forming catechol/hydroquinone. In competition and catalysed by H+ and OH-, the dihydroxycyclohexadienyl radical eliminates water yielding a phenoxyl radical. At pH 10, they readily oxidize catechol and hydroquinone. This reforms phenol (accounting for the low phenol consumption) and yields higher-oxidised products, eventually 1,4-benzoquinone. cis,cis-Muconic acid can be accounted for by the Criegee mechanism, while O2(1 delta g) is released on the way to (some of the) catechol and hydroquinone. Similar reactions proceed with hydroquinone (products: 1,4-benzoquinone, 2-hydroxy-1,4-benzoquinone and H2O2, with high yields of O2(1 delta g) and .OH) and with catechol (products: 2-hydroxy-1,4-benzoquinone, cis,cis-muconic acid, H2O2 with high yields of O2(1 delta g) and .OH). Material balance is not obtained for these two systems. Pentachlorophenolate, pentabromophenolate and 2,4,6-triiodophenolate ions give rise to halide ions, O2(1 delta g) (58%/48%/10%) and .OH (27%/2%/0%). It is suggested that together with O2(1 delta g) the corresponding ortho- and para-quinones plus a halide ion are formed. Further halide ion is released upon the hydrolysis of these and other products. For pentachlorophenolate the material balance with respect to the short-lived intermediates is 85%. With the bromo- and iodophenolates the O2(1 delta g) yields are substantially lowered, most likely due to release of triplet (ground state) dioxygen induced by the heavy atom effect.     

Improving the Determination of Nitrovin in Feeds by Reversed-Phase LC with SPE

A simple reversed-phase liquid chromatographic method with ultraviolet detector (378 nm) for the determination of nitrovin in feeds was improved and validated. The mobile phase was a mixture of acetonitrile and 0.1% formic acid solution (v/v) in the ratio of 50:50 (v/v), and the flow rate was set at 1.2 mL min^?1. The extraction solution was a mixture of dimethyl formamide, acetonitrile and methanol (50:25:25, v/v), the sample was cleaned-up with reversed-phase solid phase extraction cartridge. The standard nitrovin was purified with crude nitrovin product by ethylene glycol monoethyl ether and identified by elemental analyzer. The limit of detection was 0.05 mg kg^?1 and the limit of quatification was 0.2 mg kg^?1 in feeds. The assay had satisfactory selectivity, recovery, linearity and precise repeatability and trueness.     

On-line trace enrichment of phenolic compounds from water using a pyrrole-based polymer as the solid-phase extraction sorbent coupled with high-performance liquid chromatography

A pyrrole-based conductive polymer was prepared and applied as new sorbent for on-line solid-phase extraction (SPE) of phenol and chlorophenols from water samples. Polypyrrole (PPy) was synthesized by chemical oxidation of the monomer in non-aqueous solution. The efficiency of this polymer for extraction of phenol and chlorophenols was evaluated using 35 mg of PPy as the sorbent in an on-line SPE system coupled to reversed-phase liquid chromatography with UV detection. The mobile phase were mixture of phosphate buffer-acetonitrile and compounds were eluted by the mobile phase using a six-port switching valve. High volumes of water, up to 160 ml, could be preconcentrated without the loss of phenols, except for the more polar ones. The R.S.D. for a river water sample spiked with phenol and chlorophenols at sub-ppb level was lower than 7% (n=5) and detection limits of 15-100 and 35-150 ng l⁻¹ for tap and river water were obtained, respectively.     

Solid + liquid phase diagrams,NMR and colorimetric measurements of mixtures

Solid+liquid equilibrium, NMR and colorimetric measurements have been made for the mixtures of o-phenylenediamine+phenol, p-phenylenediamine+hydroquinone, m-phenylenediamine+phenol, m-phenylenediamine+hydroquinone, p-phenylenediamine+phenol, and p-phenylenediamine+hydroquinone. The types and melting temperatures of the complexes formed in these mixtures were ascertained from phase diagrams. The nature of the complexes was ascertained from colorimetric and NMR data.     

Electrocatalytic activity and simultaneous determination of catechol and hydroquinone at mesoporous platinum electrode

The electrochemical oxidation of catechol and hydroquinone was investigated using cyclic and differential pulse voltammetries at nanostructured mesoporous platinum film electrochemically deposited from the hexagonal liquid crystalline template of C₁₆EO₈ surfactant. The mesoporous platinum electrode has shown an excellent electrocatalytic activity and reversibility towards the oxidation of catechol and hydroquinone redox isomers in 1.0 M HClO₄. The oxidation and reduction peak separation (ΔE) has been decreased from 485 to 55 mV for hydroquinone and from 430 to 75 mV vs. SCE for catechol at polished polycrystalline and mesoporous platinum electrodes, respectively. The differential pulse voltammograms in a mixture solution of catechol and hydroquinone have shown that the oxidation peaks became well resolved and are separated by about 100 mV, although the bare electrode gave a single broad oxidation peak. Moreover, the oxidation current of hydroquinone and catechol has been enhanced by a factor of two and four times, respectively, at mesoporous platinum electrode. Using differential pulse voltammetry, a highly selective and simultaneous determination of hydroquinone and catechol has been explored at mesoporous platinum electrode.     

高效液相色谱-高锰酸钾氧化化学发光法测定水中的痕量苯二酚

基于酸性介质中甲酸对高锰酸钾-苯二酚氧化发光反应的增敏作用建立了高效液相色谱-化学发光柱后检测苯二酚的新方法。优化了高锰酸钾-苯二酚氧化发光反应及高效液相色谱分离苯二酚的条件,用甲醇-0.1 mmol/L β-环糊精水溶液(体积比为30∶70) 作为流动相可实现对水中3种苯二酚异构体的分离,且能与高锰酸钾-苯二酚氧化化学发光反应条件很好地偶合。对所测定的苯二酚异构体,方法的线性范围达两个数量级;以信噪比为3测得邻、间、对苯二酚的检出限(n=3)分别为:5.2,4.7,3.2 μg/L,对质量浓度均为0.10 mg/L的3种苯二酚混合溶液连续测定11次,邻、间、对苯二酚的相对标准偏差分别为2.8%,3.4%,6.5%。将该方法与固相萃取技术相结合,对河水中的痕量苯二酚进行了测定,加标回收率为92.1%~95.4%。     

Selective determination of hydroquinone in the presence of catechol based on over-oxidized poly(hydroquinone)

Selective determination of hydroquinone (HQ) in the presence of catechol (CC) was developed at an over-oxidized poly(hydroquinone) (PHQ) electrode. The electrochemical polymerization of HQ was carried out by potentiostatic method on a glassy carbon electrode. The resulting PHQ was over-oxidized in 0.10?mol/L NaOH solution and thus poly(p-benzoquinone) was obtained. Two dihydroxybenzene isomers, HQ and CC, show different voltammetric behavior at the over-oxidized PHQ electrode. The peak current of HQ is much larger than that of CC with the same concentration, which is attributed to the different position of the hydroxyl groups in benzene ring of the two isomers. The results from electrochemical impedance spectroscopy also demonstrates that the over-oxidized PHQ electrode has a stronger affinity for HQ over CC.     

Determination of major phenolic compounds in water by reversed-phase liquid chromatography after pre-column derivatization with benzoyl chloride

A simple reversed-phase LC method capable of detecting ng/ml quantities of phenolic compounds in water is described. Pre-column derivatization with benzoyl chloride is used for the separation and determination o-cresol, m-cresol, p-cresol, phenol, resorcinol, catechol and hydroquinone in water. The benzoyl derivatives formed within in 15 min, were extracted with dietyl ether, and then analyzed by liquid chromatography with UV detection at 232 nm. With a mobile phase of acetonitrile-tetrahydrofuran-water (54:6:40, v/v) the seven derivatives were eluted in 15 min. The detection limits were between 0.05 and 0.50 ng/ml for 50 ml of a standard water sample. The method was applied to the analysis of phenols in wine and river water. The recovery of the derivatives from pure water was 81-94% with relative standard deviations of 2.5-5.0%.     

Pyridine-H_5PMo_(10)V_2O_(40) hybrid catalysts for liquid-phase hydroxylation of benzene to phenol with molecular oxygen

Pyridine(Py)-modified Keggin-type vanadium-substituted heteropoly acids(PynPMo10V2O40,n=1 to 5) were prepared by a precipitation method as organic/inorganic hybrid catalysts for direct hydroxylation of benzene to phenol in a pressured batch reactor and their structures were detected by FT-IR.Among various catalysts,Py3PMo10V2O40 exhibits the highest catalytic activity(yield of phenol,11.5%),without observing the formation of catechol,hydroquinone and benzoquinone in the reaction with 80 vol% aqueous acetic ...     

Continuous-flow/stopped-flow system for determination of ascorbic acid using an enzymatic rotating bioreactor

The high sensitivity that can be attained using an enzymatic system and mediated by hydroquinone, has been verified by on-line interfacing of a rotating bioreactor and continuous flow/stopped-flow/continuous-flow processing. Horseradish peroxidase, HRP, [EC 1.11.1.7], immobilized on a rotating disk, in presence of hydrogen peroxide catalyses the oxidation of hydroquinone to p-benzoquinone, whose electrochemical reduction back to hydroquinone is detected on glassy carbon electrode (GCE) surface at −0.15 V. Thus, when l-ascorbic acid is added to the solution, this acid is reduced chemically (p-benzoquinone to hydroquinone) and acts as mediator of HRP, decreasing the peak current obtained proportionally to the increase of its concentration. The recovery of l-ascorbic acid from four samples ranged from 99.09 to 101.10%. This method could be used to determine l-ascorbic acid concentration in the range 12 nM-3.5 μM (r = 0.998). The determination of l-ascorbic acid was possible with a limit of detection of 6 nM in the processing of as many as 25 samples h⁻¹. The method was successfully applied for the analysis of l-ascorbic acid in pharmaceutical formulations.     

Comparison of preparation methods of N-arylsulfinyl-1,4-benzoquinone monoimines

Advantages and shortcomings were discussed of three procedures for preparation N-arylsulfinyl-1,4-benzoquinone imines: the reaction of arenesulfenyl chlorides with 1,4-benzoquinone oximes, the oxidation of N-arylthio-1,4-benzoquinone imines, and the reaction of arylsulfinyl chlorides with p-aminophenols followed by oxidation. A series of new N-arylsulfinyl-1,4-benzoquinone imines was obtained.     

Selective performance of sol-gel synthesised titanium dioxide photocatalysts in aqueous oxidation of various-type organic pollutants

Photocatalysts synthesized by sol-gel method inevitably incorporate carbon together with dopants. The objective of the research consists in the synthesis and testing of photocatalytic activity of carbon-containing titanium dioxide photocatalysts calcinated at various temperatures. The optical and structural properties of the catalysts were also studied. The activity was tested in visible light in aqueous photocatalytic oxidation of three various-type pollutants, methyl-tert-butyl ether, p-toluidine and phenol, where the divergent character of the C-TiO₂ catalysts was distinctively observed: methyl-tert-butyl ether and p-toluidine were oxidized with the efficiency close to or even surpassing that of UV-irradiated P25 (Evonik), whereas phenol was oxidized poorly. The observed photocatalytic activity, where quantum efficiency varied from 0.6 to 2.3 and from 0.1 to 1.2% for p-toluidine and phenol degradation respectively, may be explained by the different electrostatic properties of the catalysts’ surface and the tested substances, i.e. their interaction. This compromises the widespread usage of phenol as a reference substance for comparison of catalytic activities of catalysts.     

Investigation of electrochemically induced Michael addition reactions. Oxidation of some dihydroxybenzene derivatives in the presence of azide ion

In aqueous solution containing azide ion as a nucleophile, electrochemical oxidation of hydroquinone and some dihydroxybenzoic acids have been studied using cyclic voltammetry and controlled-potential coulometry. The voltammetric data show that electrochemically generated para and ortho-benzoquinones participate in Michael addition reactions with azide ions to form the corresponding diazido or diaminobenzoquinones. In this work, we have proposed various mechanisms for the electrode process and we report an efficient and one-pot method for the synthesis of 2,5-diazido-1,4-benzoquinone, 2,5-diamino-1,4-benzoquinone, 4,5-diamino-1,2-benzoquinone, and 2,3-diamino-5,6-dioxocyclohexa-1,3-dienecarboxylic acid based on the Michael reaction of electrochemically generated ortho and para-benzoquinones with azide ion in an undivided cell using an environmentally friendly reagent-less method in ambient conditions. An estimation of the observed homogeneous rate constant (k_obs) of the reaction of electrochemically generated para-benzoquinone with azide ion by the digital simulation method is also presented.