Voltammetric determination of 17α-ethinylestradiol hormone in supply dam using BDD electrode

In this work, a simple method for electroanalytical determination of 17α-ethinylestradiol (EE2) hormone in natural waters was developed using a boron-doped diamond electrode (BDD). The analyses were performed using square wave voltammetry and the parameters were optimized. The results showed a well-defined irreversible oxidation peak (BR buffer 0.1 mol L^?1, pH 8.0) at +0.65 V (vs. Ag/AgCl). The voltammetric results showed also that the oxidation process is controlled by adsorption of species and indicated that there are two electrons involved. The obtained analytical curves for 17α-ethinylestradiol presented good linearity in the concentration range 9.9?×?10^?7 to 5.2?×?10^?6 mol L^?1 in utlrapure water and 7.9?×?10^?7 to 5.2?×?10^?6 mol L^?1 in natural water samples (supply dam). Detection limits (DL) obtained were between 2.4?×?10^?7 and 7.5?×?10^?7 mol L^?1 and quantification limits (QL) between 7.9?×?10^?7 and 2.5?×?10^?6 mol L^?1. The recovery experiments showed values between 86 and 114 % for spiked samples thus indicating the applicability of the electroanalytical methodology to quantify 17α-ethinylestradiol directly in natural water of supply Dam (Billings Dam in Diadema-SP. Brazil), without any preconcentration or derivatization.     

Simultaneous determination of eight antibiotics from distinct classes in surface and wastewater samples by solid-phase extraction and high-performance liquid chromatography–electrospray ionisation mass spectrometry

A reliable multiclass method has been developed and validated for the determination of eight antibiotics from distinct classes (sulfonamides, macrolides, fluoroquinolones, tetracyclines, cephalosporins and dihydrofolate reductase inhibitors) in wastewater – influent and effluent – and surface water from Porto Alegre, Brazil. The pre-concentration and clean-up was conducted with a simple and fast protocol using solid-phase extraction allowing a 100-fold concentration factor. The proposed method was validated by using spiked blank wastewater samples in terms of linearity, repeatability, reproducibility, recovery, matrix effects and limits of detection and quantification. Recovery was obtained in the range of 66–149%. Method limit of quantification ranged between 1.6 and 61.7 ng L^?1. Samples (n = 16) were taken from January to August 2011 in one wastewater treatment plant, which uses conventional biological treatment. Sulfamethoxazole and trimethoprim show higher concentration, ranging from >10 to <6500 ng L^?1, whereas erythromycin presented the lower amount. Differences between influent and effluent profiles were discussed. Surface water samples (n = 8) were collected in Arroio Diluvio, in four sampling points, in February 2012. From the eight antibiotics analysed, five were detected: sulfamethoxazole, trimethoprim, azythromicyn, ciprofloxacin and norfloxacin, in a concentration range of 376–572 ng L^?1, 27–94 ng L^?1, 24–40 ng L^?1, 16–66ng L^?1 and 30–54 ng L^?1, respectively.     

Application of ultra-performance liquid chromatography-tandem mass spectrometry for the determination of steroid oestrogens in wastewaters

An ultra-performance liquid chromatography method using a triple quadrupole mass spectrometer was developed and validated for the determination of steroid oestrogens in wastewater matrices. To date, analytical methods established in the literature for 17α-ethinylestradiol have been unable to achieve the proposed predicted no effect concentration of 0.1?ng?l^?1. The extensive sample pretreatment and analytical methodology proposed herein enable 17α-ethinylestradiol to be determined at very low background concentrations with a theoretical method detection limit of 0.06?ng?l^?1 which has been applied in real environmental matrices. During the validation process, a trickling filter wastewater treatment works was monitored to demonstrate the method's application. Oestrogen removal across the filters demonstrated good removals of natural free oestrogens (≥62.0%) with lower removals of the synthetic oestrogen 17α-ethinylestradiol (29.2%) from wastewaters at 10°C. The method's application illustrates its capability of detecting oestrogen concentrations in real wastewater samples comprising complex organics of comparatively high concentration. Furthermore, a complete process mass balance for 17α-ethinylestradiol is now attainable which has previously posed a challenge owing to the low environmental concentrations typically exhibited, but more significantly as a result of the lower sensitivity inherent in previously reported analytical methods.     

Simultaneous determination of 15 steroidal oral contraceptives in water using solid-phase disk extraction followed by high performance liquid chromatography–tandem mass spectrometry

A rapid, accurate and sensitive method for simultaneous determination of 15 steroidal hormones including four estrogens (estrone, 17β-estradiol, 17α-ethynylestradiol, estriol) and eleven progestogens (17β-estradiol-3-benzoate, 19-norethindrone, gestodene, levonorgestrel, medroxyprogesterone, cyproterone acetate, megestrol-17-acetate, progesterone, norethindrone acetate, chlormadinone-17-acetate, and hydroxy progesterone caproate) in environmental waters was developed by coupling solid-phase disk extraction (SPDE) to ultra performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) with electrospray ionization. Among three types of extraction tested (C₈ SPDE, C₁₈ SPDE and C₁₈ SPE), the most satisfactory result was achieved using C₁₈ SPDE for its satisfactory recovery (75.6 to 101.4%) and short extraction time (15 min for 1 L deionised water). The validity of this method was investigated and good analytical performance for all the analytes was obtained, including low limits of method detection (0.5–3.4 ng/L) and excellent linear dynamic range (1.0–50.0 ng/L). The method was applied to determine the steroidal hormones in 10 environmental waters including tap water, river water, lake water and waste water in Beijing. No progestogen was detected in all samples and estrone, estriol, 17α-ethynylestradiol were found in most samples at levels between 1.8 and 127.9 ng/L.     

Development and optimisation of a GC-MS method for the evaluation of oestrogens and persistent pollutants in river and seawater samples

This paper describes the development and validation of a GC-MS method which allows the simultaneous quantification of 11 endocrine disrupting compounds (EDCs) in surface water samples from both estuary and sea. The analysed EDCs are oestrone (E1), 17β-estradiol (E2), 17α-ethynylestradiol (EE2), 4-tert-octylphenol, 4-n-octylphenol, 4-nonylphenol, bisphenol A and finally, mono and diethoxylates of 4-nonylphenol and 4-octylphenol. The method includes the pre-concentration of water samples, 1000-fold factor, in OASIS HLB cartridges by solid phase extraction, the derivatisation of all EDCs by N,O-bis(trimethylsilyl)trifluoroacetamide added with 1% trimethylchlorosilane and pyridine (at 65°C for 30?min) and, finally the stabilisation of the EDCs-silylated derivatives, in hexane, for 72?h. The validation parameters revealed that this method was highly specific for all target compounds using real samples. The linearity of the calibration curves (r ²) showed correlation factors higher than 0.990. The detection limits ranged from 0.10 to 1.45?ng?L^?1, depending on each analysed compound, and recoveries were satisfactory for most of the assayed EDCs (>60%). Analysis of samples from four polluted areas of Douro River estuary and from two points of the Atlantic Ocean (Portugal) showed high amounts of E1 (up to 1.96?ng?L^?1), E2 (up to 14.36?ng?L^?1) and EE2 (up to 2.76?ng?L^?1).     

Voltammetric study and electroanalytical determination of contraceptive levonorgestrel using silver solid amalgam electrode fabricated with nanoparticles

Here we describe the investigation of the electrochemical behaviour and the electroanalytical quantification of hormonal contraceptive levonorgestrel using solid amalgam electrode fabricated with silver nanoparticles. Until now, to the best of our knowledge, this is the first report of the use of solid working electrodes for levonorgestrel determination. Over this electrodic surface, the substance showed one cathodic peak at E_p = ?1.41 V. Moreover, the electrochemical reduction of levonorgestrel was defined as an irreversible and mainly adsorption-controlled process involving two protons and two electrons. Square-wave adsorptive stripping voltammetry (SWAdSV) was used for the quantification of levonorgestrel. The instrumental and experimental parameters were studied and optimized. The best conditions of analysis were observed when using 0.04 mol L^?1 Britton–Robinson (BR) buffer at pH 6.0. The analytical signal of levonorgestrel showed a linear dependence on the concentration range from 5.03 × 10^?7 mol L^–1 to 1.01 × 10^?5 mol L^–1. The LOD and LOQ obtained were 9.09 × 10^?8 mol L^?1 and 3.03 × 10^?7 mol L^?1, respectively. The voltammetric method was employed for the quantification of levonorgestrel in real pharmaceutical formulations and urine samples. The results provided good concordance with the expected values. It makes the working electrode used here an interesting and less toxic option for the analysis of reducible substances in comparison with the HMDE.     

Assessment of the occurrence and distribution of pharmaceuticals in a Mediterranean wetland (L'Albufera, Valencia, Spain) by LC-MS/MS

The distribution of 17 pharmaceuticals between water and the solid phase (sediments and soils) was studied by utilizing solid-phase extraction (SPE) and liquid chromatography?Ctandem mass spectrometry (LC-MS/MS). Two extraction procedures for soils and sediments, prior to the SPE, one based on pressurized liquid extraction (PLE) with hot water and the other on methanol/water ultrasonic extraction, were compared. Absolute recoveries were 71.2?C99.3% [relative standard deviation (RSD) <21.4%)] for water, and the method detection limits (MDLs) ranged from 0.3 to 10?ng?L^?1. Recoveries were 35.4?C105.3% (RSDs <19.1%) and 42.1?C97.8% (RSDs <14%) for soil and sediment samples, respectively, using PLE and 20.2?C86.5% (RSDs <25.1%) and 30.3?C97.4% (RSDs <19.1%) using ultrasonic extraction. Fifteen of the 17 pharmaceuticals were present in the L??Albufera water at concentrations up to 17???g?L^?1. Oxytetracycline and tetracycline were not detected. In sediments, only tetracycline, norfloxacin and diclofenac were not found. The other studied pharmaceuticals were present in the range from less than the method quantification limit (MQL) to 35.83?ng?g^?1. Among the 17 target compounds, ofloxacin, ciprofloxacin, norfloxacin, trimethoprim, clofibric acid and diclofenac were not detected in soil samples. The average concentrations ranged from less than the MQL for ibuprofen to 34.91?ng?g^?1 for tetracycline. These results indicate that pharmaceuticals could survive the wastewater treatment processes, which could lead to their dissemination in water environments.     

Quantitative determination of toluene,ethylbenzene, and xylene degradation products in contaminated groundwater by solid-phase extraction and in-vial derivatization

Benzylsuccinic acid (BSA) and methylbenzylsuccinic acids (mBSAs) are unambiguous indicators of anaerobic toluene and ethylbenzene/xylene degradation, and so the determination of these compounds in landfill leachates and contaminated groundwater is highly relevant. Samples were diluted to <0.8?mS?cm^?1 in order to reduce their ionic strength, and subsequently extracted through strong anion exchange disks, followed by simultaneous in-vial elution and methylation. A detection limit of 0.1?µg?L^?1 was obtained for 100?mL samples. Using this method, 19.3?µg?L^?1 of BSA was measured in a landfill leachate, and low µg?L^?1 levels of all of the mBSAs were measured in gasoline-contaminated groundwater. The results were compared with the findings of BSAs at 16 other contaminated sites, and BSAs as indicators of biodegradation were evaluated. The estimation of biodegradation rates based on parent hydrocarbons and BSA concentrations or ratios is questionable. However, the degradation products serve as good qualitative in situ indicators for anaerobic biodegradation in contaminated groundwater.     

Multi-determination of organic pollutants in water by gas chromatography coupled to triple quadrupole mass spectrometry

A multi-determination method has been developed for the determination and confirmation of 68 organic pollutants in water samples by gas chromatography coupled to triple quadrupole mass spectrometry (GC-MS/MS). The following chemical families were determined in a chromatographic run of less than 26?min: polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenylethers (PBDEs), and pesticides (organochlorine, organophosphorus, triazine and others). The sample preparation involved a liquid-liquid extraction (LLE) procedure, obtaining recoveries ranging from 70 to 130% when dichloromethane was used as the extracting solvent. The detection limits of the proposed method were between 0.75 and 19.8?ng?L^?1. Samples from the Maipo River in central Chile were taken from 29 different points. Seven pesticides and two PAHs were detected in field collected samples with concentrations ranging from 10 to 95?ngL^?1. Concentrations of benzo[a]pyrene in environmental samples ranged from 25 to 33?ngL^?1 and were near the maximum levels established by the European Union Directives (50?ng?L^?1).     

Determination of biocides in different environmental matrices by use of ultra-high-performance liquid chromatography–tandem mass spectrometry

A sensitive and robust method using solid-phase extraction and ultrasonic extraction for preconcentration followed by ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC–MS–MS) has been developed for determination of 19 biocides: eight azole fungicides (climbazole, clotrimazole, ketoconazole, miconazole, fluconazole, itraconazole, thiabendazole, and carbendazim), two insect repellents (N,N-diethyl-3-methylbenzamide (DEET), and icaridin (also known as picaridin)), three isothiazolinone antifouling agents (1,2-benzisothiazolinone (BIT), 2-n-octyl-4-isothiazolinone (OIT), and 4,5-dichloro-2-n-octyl-isothiazolinone (DCOIT)), four paraben preservatives (methylparaben, ethylparaben, propylparaben, and butylparaben), and two disinfectants (triclosan and triclocarban) in surface water, wastewater, sediment, sludge, and soil. Recovery of the target compounds from surface water, influent, effluent, sediment, sludge, and soil was mostly in the range 70–120?%, with corresponding method quantification limits ranging from 0.01 to 0.31?ng?L^?1, 0.07 to 7.48?ng?L^?1, 0.01 to 3.90?ng?L^?1, 0.01 to 0.45?ng?g^?1, 0.01 to 6.37?ng?g^?1, and 0.01 to 0.73?ng?g^?1, respectively. Carbendazim, climbazole, clotrimazole, methylparaben, miconazole, triclocarban, and triclosan were detected at low ng?L^?1 (or ng?g^?1) levels in surface water, sediment, and sludge-amended soil. Fifteen target compounds were found in influent samples, at concentrations ranging between 0.4 (thiabendazole) and 372?ng?L^?1 (methylparaben). Fifteen target compounds were found in effluent samples, at concentrations ranging between 0.4 (thiabendazole) and 114?ng?L^?1 (carbendazim). Ten target compounds were found in dewatered sludge samples, at concentrations ranging between 1.1 (DEET) and 887?ng?g^?1 (triclocarban).     

Voltametric and Flow Injection Determination of Oxytetracycline Residues in Food Samples Using Carbon Fiber Microelectrodes

A voltammetric method for the determination of the antibiotic oxytetracycline (OTC) in food samples is reported. Carbon fiber microelectrodes (CFMEs), which allow voltammetric measurements to be performed in a small volume (1 mL) of the analyte extract from the samples, are employed. Repeatable electroanalytical responses were obtained with no need of applying cleaning treatments to the CFME. Under the optimized square‐wave conditions, a linear calibration plot for OTC was obtained in the 1.0×10^?6–1.0×10^?4 mol L^?1 range, with a detection limit of 2.9×10^?7 mol L^?1 (150 ng mL^?1) OTC. The determination of OTC by a flow‐injection method with amperometric detection using a homemade flow cell specially designed to work with CFMEs, was also evaluated using pure acetonitrile as the carrier. The SW voltammetric method was applied to the determination of OTC in spiked milk and eggs samples, at 100 ng mL^?1 and 200 ng g^?1 levels, respectively. The procedure involved the extraction of the analyte in ethyl acetate, evaporation of the solvent and reconstitution of the residue in acetonitrile ?5.0×10^?4 mol L^?1 tetrabutylammonium perchlorate medium. Recoveries of 96±8 and 91±8% were obtained for milk and eggs, respectively, by applying the standard additions method.     

Ultrasound-Assisted Dispersive Liquid�CLiquid Microextraction Combined with Low Solvent Consumption for Determination of Polycyclic Aromatic Hydrocarbons in Seawater by GC�CMS

Ultrasound-assisted dispersive liquid?Cliquid microextraction (USA-DLLME) with low solvent consumption was demonstrated for gas chromatography-mass spectrometry (GC?CMS) determination of 16 typical polycyclic aromatic hydrocarbons (PAHs) in seawater samples. Factors affecting the extraction process, such as extraction and dispersive solvent, phase ratio, temperature, extraction and centrifugation time, were investigated thoroughly and optimized. The linear range was 20?C2,000 ng L^?1 except for acenaphthylene (Acy) at 10?C2,000 ng L^?1 and phenanthrene (Phe), fluoranthene (Flu) and pyrene (Py) all at 5?C2,000 ng L^?1. Enrichment factors (EFs) ranging from 722 to 8,133 were obtained, achieving limits of detection at 1.0?C10.0 ng L^?1. The method attained good precision (relative standard deviation, RSD) from 3.4 to 14.2% for spiked 50 ng L^?1 individual PAHs standards. Method recoveries were in the range 87?C124% and 70?C127% for spiked samples from simulated seawater and beach seawater, respectively. The proposed USA-DLLME helped to obtain about 1.1?C10 times higher EFs in a minimum amount of solvent and in less time than traditional DLLME.     

Determination of phosphate in freshwater samples by flow-injection with lucigenin chemiluminescence

Lucigenin chemiluminescence (CL) in conjunction with flow-injection analysis (FIA) is used for the determination of phosphate in freshwater samples. The procedure is based on the formation of molybdophosphoric heteropoly acid (MoP–HPA) by the reaction of phosphate and ammonium molybdate under acidic conditions. CL emission was observed as a result of oxidation of lucigenin in aqueous sodium hydroxide solution in the presence of MoP–HPA. Calibration was linear up to 500?µg?L^?1 (r ^2?=?0.9998; n?=?8), with a detection limit (S/N?=?3) of 0.95?µg?L^?1. An injection throughput of 120 h^?1, and relative standard deviation (RSD; n?=?4) of 1.3–3.2% were achieved in the concentration range studied. An on-line chelating column was used to remove interfering cations. The method was applied to freshwater samples, and the results (51?±?1.0 – 107?±?2.0?µg?L^?1) did not differ significantly from results obtained using a spectrophotometric method (52.5?±?1.0 – 102?±?2.0?µg?L^?1) at 95% confidence level (t-test).     

Cloud-point extraction,preconcentration, and spectrophotometric determination of palladium in water samples

The possibility of using Thio-Michler's Ketone (TMK), 4,4′-bis(dimethylamino) thiobenzophenone, for palladium(II) concentrated by micellar extraction at the cloud-point temperature, and later spectrophotometric determination, was investigated. Under the optimum conditions, preconcentration of 50?mL of water samples in the presence of 0.1% (w/v) octylphenoxy polyethoxy ethanol (Triton X-114), 2?×?10^?6?mol?L^?1?TMK and 1?×?10^–3?mol?L^?1 buffer solution (pH?=?3.0) gave the limit of detection of 0.47?ng?mL^?1, and the calibration graph was linear in the range of 2–50?ng?mL^–1. The recovery under optimum working conditions was higher than 97%. The proposed method has been applied to the spectrophotometric determination of palladium(II) in natural water samples after cloud-point extraction with satisfactory results.     

Electrochemical Determination of Sunscreens Agents in Cosmetic Using Square Wave Voltammetry

Sunscreen agents and in particular UV filters are compounds added in different cosmetic formulations, that has the function of preventing damage caused by sun exposition. Therefore, this paper proposes the development of a simple, fast and reliable electroanalytical method utilizing square wave voltammetry (SWV) to the determination of Benzophenone‐3 (BZ‐3), camphor 4‐methylbenzylidene (MBC) and 2‐ethylhexyl‐4‐methoxycinnamate (OMC) in cosmetic samples. The electrochemical system consisted of a cell with three electrodes: work – gold electrode modified, reference – Ag/AgCl_(sat) and auxiliary – platinum, using as supporting electrolyte 4.0 mL of Britton Robinson Buffer 0.04 mol L^?1 (pH=4.0), 1.0 mL of methanol and 5.50×10^?4 mol L^?1 of cetyltrimethylammonium bromide (CTAB). The method was validated using three commercial sunscreen samples and the results showed recovery values between 83 and 98 %. The average values found for the analysed samples were 3.49 % m/m (728 mg L^?1) to BZ‐3, 0.56 % m/m (113 mg L^?1) to MBC and 0.99 % m/m (208 mg L^?1) to OMC. The detection (DL) and quantification (QL) limits were 0.47 mg L^?1 and 1.56 mg L^?1 to BZ‐3, 0.77 mg L^?1 and 2.58 mg L^?1 to MBC and 0.78 mg L^?1 and 2.59 mg L^?1 to OMC, respectively. The sunscreen protector samples were also evaluated by high‐performance liquid chromatography (HPLC) demonstrating a good correlation between the results and compared the results with allowed concentration.     

Ultra-trace determination of aquaculture chemotherapeutants and degradation products in environmental matrices by LC-MS/MS

Two of the most common products currently used to control parasitic sea lice in fin fish aquaculture, salmon in particular, are Slice® and AlphaMax®. Emamectin benzoate (EB) is the active ingredient in Slice® and deltamethrin is the active ingredient in AlphaMax®. Several analytical methods have been developed for the determination of the active ingredients in these products but these have been focused on specific matrices and lack the sensitivity and versatility required in environmental monitoring. Here we present a validated, versatile, and simple analytical method for the determination of EB, its desmethyl degradation product (AB), and deltamethrin in a wide range of environmental matrices (sea water, marine sediment, and tissue). Sediments and tissues were extracted by accelerated solvent extraction (ASE®) and sample cleanup was achieved by solid phase extraction (SPE) while sea water was extracted using SPE disks. Analyte identification and quantification was based on liquid chromatography tandem mass spectrometry (LC-MS/MS) instrumentation with electrospray ionization, and multiple reaction monitoring (MRM). Method detection limits for the target analytes was in the parts per trillion (pg?g^?1) level for tissue and sediment and parts per quadrillion (pg?L^?1) for water. Except for deltamethrin in sea water, method performance in terms of analyte recoveries was better than 60%, and the method precision was RSD<20%. The method was used to determine EB and AB concentrations in water, sediment and prawn tissue samples collected near salmon aquaculture sites treated with Slice®. A distinct concentration gradient was observed in the immediate vicinity (within 50 to 100?m radius) of the salmon aquaculture sites where EB was detected at low ng?g^?1 levels for tissue (EB ranged from 0.041 to 3.0?ng?g^?1) and sediment (EB ranged from 0.051 to 35?ng?g^?1) and pg?L^?1 levels (EB ranged from 3 to 209?pg?L^?1) for water samples.     

Determination of cadmium and lead in aqueous environmental samples after complexation and microextraction onto the surface of an empty solvent-impregnated polypropylene fibre coupled with electrothermal AAS

A procedure based on polypropylene hollow-fibre preconcentration coupled with electrothermal atomic absorption spectrometry (ETAAS) was developed for the determination of cadmium and lead in seawater, wastewater, tap water and lake water samples. The n-octanol was immobilised in the pores of the polypropylene hollow fibre, which was used as the liquid sorption membrane negating the need for acceptor liquid phase in the lumen. The metal ions were extracted from water samples onto the impregnated fibre, as ammonium pyrrolydine dithiocarbamate (APDC) complexes, and then back-extracted into a small volume of 0.1?mol?L^?1 HNO₃. The main extraction-related parameters were properly evaluated and an interference study was carried out. Linear regression lines were plotted and replicate analyses of real samples revealed that the proposed method is precise and accurate, able to be applied in routine analysis with detection limits of 4?ng?L^?1 and 12?ng?L^?1 for Cd and Pb, respectively.     

Speciation analysis of thallium in water samples after separation/preconcentration with the Empore™ chelating disk

A simple, reliable and novel solid phase extraction procedure using the Empore? chelating disk has been developed for determination of Tl(I) and Tl(III) in environmental water samples by electrothermal atomic absorption spectrometry (ETAAS). The influence of humic acids on separation/preconcentration of thallium species with the Empore? chelating disk is investigated. The preconcentration factor and detection limit are 500 and 5?ng?L^?1, respectively. The recoveries are in the range 93–103% for mineral, pond, sea, snowmelt, waste waters at 28–500?ng?L^?1 Tl and in the range 82–112% for river waters at 18–28?ng?L^?1 Tl.     

Sensitive Simultaneous Determination of o-Nitrophenol and p-Nitrophenol in Water by Surfactant-Mediated Differential Pulse Voltammetry

A simple, low-cost and sensitive electroanalytical method was developed for the simultaneous determination of p-nitrophenol and o-nitrophenol isomers in water samples at a glassy carbon electrode (CGE) in the presence of cationic surfactant. The electrochemical behavior of p-nitrophenol and o-nitrophenol was studied by cyclic voltammetry (CV) in 0.1?mol L^?1 acetate/acetic acid buffer (pH 3.70) in the presence and absence of cetylpyridinium bromide. The resolution of overlapped cathodic peaks potentials (E_pc) of isomers was successfully improved in the presence of 100.0?µmol L^?1 cetylpyridinium bromide, thus making this approach ideal for the simultaneous determination of isomers. Under the optimized conditions in 0.05?mol L^?1 HEPES buffer at pH 7.0 using differential pulse voltammetry (DPV) at a scan rate of 45?mV s^?1, pulse amplitude of 220?mV and modulation time of 10?ms, limits of detection 0.59?µmol L^?1 for p-nitrophenol and 1.14?µmol L^?1 for o-nitrophenol were obtained with linear ranges from 2.0 to 60.0?µmol L^?1 and 3.0 to 60.0?µmol L^?1, respectively. The intraday precision was assessed as relative standard deviation (%) for 20.0 and 40.0?µmol L^?1 concentrations were 4.30% and 2.41% for p-nitrophenol and 4.87% and 2.20% for o-nitrophenol, respectively. The developed method was applied for the determination of the isomers in lake water samples. The accuracy was attested by comparison with high-performance liquid chromatography with diode array detection (HPLC-DAD) as a reference analytical technique. Recovery values ranging from 90.3% to 111.8% also attested to the accuracy of method for analysis of real samples.     

Determination of monohydroxylated metabolites of polycyclic aromatic hydrocarbons (OH-PAHs) from wastewater-treatment plants

A high-performance liquid chromatography separation coupled with mass spectrometry via an electrospray interface is proposed for the determination of the hydroxylated derivatives of polycyclic aromatic hydrocarbons (OH-PAHs) in treated and untreated wastewaters and suspended solids from sewage treatment plants (STPs). The developed SPE procedure was applied to spiked wastewater samples, with recovery yields (1000?mL; 100?ng?L^?1 spiking level) in the 65–87% (RSD: 6–12%) range for the selected OH-PAHs. The limits of detections ranged between 0.3 and 3.2?ng?L^?1, depending on the selected compound and on the investigated matrix. The proposed method was applied to the determination of the selected analytes in real samples from a sewage-treatment plant (STP). The investigated OH-PAHs were detected mainly in the particulate fraction. The exhibited mean concentrations of positive samples (as the sum of dissolved and particulate matter) in the STP final effluent ranged from 15 to 68?ng?L^?1.