Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.     

铂-氢钨青铜电极的制备及对氢氧化的电催化

采用电化学还原法在表面改性的碳布上,通过改变催化剂沉积顺序及氢钨青铜沉积时间制备铂-氢钨青铜复合催化剂,所得电极作为质子交换膜燃料电池(PEMFC)阳极。利用X射线衍射(XRD)、热重分析(TG)、扫描电子显微镜(SEM)、循环伏安(CV)及单电池极化性能测试研究了催化剂的组成、沉积量、分散性及其对氢氧化的电催化活性。实验结果表明,氢钨青铜沉积时间及催化剂沉积顺序对电极催化性能有显著影响,当氢钨青铜沉积时间为10 min,先沉积氢钨青铜、后沉积铂所得Pt/HxWO3电极对氢氧化具有最佳的催化活性。适量的氢钨青铜才能与铂形成较好的协同催化效应。     

Formation and Oxidation of Hydrogen Molybdenum Bronze on Platinum Electrode in Sulfuric Acid Solution

Hydrogen molybdenum bronze (HxMoO3) can be electrodeposited on platinum and oxidized in two steps to the hydrogen molybdenum bronze with less amount of hydrogen HyMoO3 (y相似文献   

Selective skeletal isomerization of alkanes over partially reduced MoO<Subscript>3</Subscript>

The surface area and the pentane isomerization activity of Pt/MoO₃ were enlarged by H₂ reduction. The enlargements was observed only when the reduction proceeded through the formation of hydrogen molybdenum bronze, H_xMoO₃. The catalytic activities of H₂-reduced MoO₃ with different noble metals for pentane isomerization and 2-propanol dehydration depended on the ability of noble metal to produce the H_xMoO₃ phases. H₂-reduced Pt/MoO₃ was more active for pentane isomerization than Pt/H, and its activity was comparable to that of Pt/HZSM-5. In heptane isomerization, H₂-reduced Pt/MoO₃ exhibited a lower activity than Pt/H, although heptane was isomerized very selectively. Strong adsorption of heptane onto H₂-reduced Pt/MoO₃ is likely to be a reason for its lower heptane isomerization activity.     

Molybdenum‐tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non‐noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum‐tungsten bimetallic oxide (CTAB‐D‐W₄MoO₃) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^?2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^?1. The excellent electrocatalytic HER performance of CTAB‐D‐W₄MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.     

氢钼青铜对铂催化氧还原反应的促进作用

采用循环伏安法在玻碳电极上和硫酸溶液中电沉积制备出铂催化剂(Pt)及铂-氢钼青铜复合催化剂(Pt-HxMoO3), 用旋转圆盘电极研究并比较了它们对硫酸溶液中氧还原反应的催化活性. 研究结果表明, HxMoO3能明显地提高Pt对氧还原反应的电催化活性. 通过对静态电极上氧还原的峰电流与扫描速度的关系以及旋转圆盘电极上氧还原电流与旋转速度的关系的分析发现, HxMoO3提高了铂电极氧还原反应电荷传递步骤的传递系数, 因此加快了氧还原的动力学过程.     

Synthesis and Structure of the Supramolecular Adduct Formed by the [Mo3S4(H2O)7Cl22+ Cluster Complex with Cucurbituril: {[Mo3S4(H2O)7Cl2](C36H36N24O12)} Cl2·10H2O

Slow crystallization of an HCl solution containing cucurbituril (C₃₆H₃₆N₂₄O₁₂) and a triangular molybdenum cluster aqua complex [Mo₃S₄(aq)]⁴⁺ yielded a supramolecular adduct of { [Mo₃S₄(H₂O)₇Cl₂]×(C₃₆H₃₆N₂₄O₁₂₎Cl₂·10H₂O composition. The molecular and crystal structure of the adduct were established by single crystal X-ray diffraction. Monoclinic crystal system, space group P2₁/c, a = 21.4762(2) Å, b = 14.6853(1) Å, c = 24.6480(3) Å; β = 112.8366(5)°, V _cell = 7164.26(12) ų, Z = 4, ρ_calc = 1.725 g/cm³.Original Russian Text Copyright © 2004 by E. V. Chubarova, D. G. Samsonenko, J. H. Platas, M. N. Sokolov, and V. P. Fedin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 950–954, September–October, 2004.     

Preparation and studies of a new ammonium vanadium bronze, (NH4)xV2O5

A new bronze-type phase of composition (NH₄)_0.40±0.02V₂O₅ is obtained around 230°C during the thermal decomposition of NH₄VO₃ in hydrogen atmosphere. The bronze intermediate is characterized by X-ray diffraction, electrical conductivity, magnetic susceptibility, and ESR studies. It is found to be isostructural with other known β-type vanadium bronzes of general formula M_xV₂O₅, where M is usually a monovalent metal. Electrical conductivity and magnetic studies indicate the localized character of conduction electrons at V⁺⁴ sites. At high temperatures (>400°C), the bronze undergoes decomposition and subsequent reduction to V₂O₃ in hydrogen atmosphere.     

直接有机小分子燃料电池氢钼/钨青铜修饰铂电催化剂

减少铂用量和提高铂的抗中毒能力,是直接有机小分子燃料电池实用化过程期待解决的难题,由此而引发了广泛的研究,迄今已先后建立了许多的解决方案.作者也提出了基于氢钼/钨青铜(HxMo(W)O3,0相似文献   

Ultrasmall Cu7S4@MoS2 Hetero‐Nanoframes with Abundant Active Edge Sites for Ultrahigh‐Performance Hydrogen Evolution

Increasing the active edge sites of molybdenum disulfide (MoS₂) is an efficient strategy to improve the overall activity of MoS₂ for the hydrogen‐evolution reaction (HER). Herein, we report a strategy to synthesize the ultrasmall donut‐shaped Cu₇S₄@MoS₂ hetero‐nanoframes with abundant active MoS₂ edge sites as alternatives to platinum (Pt) as efficient HER electrocatalysts. These nanoframes demonstrate an ultrahigh activity with 200 mA cm^?2 current density at only 206 mV overpotential using a carbon‐rod counter electrode. The finding may provide guidelines for the design and synthesis of efficient and non‐precious chalcogenide nanoframe catalysts.     

Synthesis,structure and properties of eight novel molybdenum(VI) complexes of the types: [MoO2LD] and [{MoO2L}2D] (L = thiosemicarbazonato ligand,D = N-donor molecule)

Eight new molybdenum(VI) complexes with 4-(diethylamino)salicylaldehyde and 2-hydroxy-3-methoxybenzaldehyde thiosemicarbazones have been prepared. They were characterized as mononuclear [MoO₂LD] or dinuclear [{MoO₂L}₂D] complexes. In all the compounds the MoO₂²⁺ core is coordinated by a tridentate ONS thiosemicarbazonato ligand and by the N-donor molecule (imidazole, pyridine or γ-picoline). All the complexes were characterized by chemical analysis, IR spectroscopy and thermogravimetry. Three of the mononuclear complexes, dioxo[(2-hydroxy-3-methoxybenzaldehyde thiosemicarbazonato)(pyridine)]molybdenum(VI), dioxo[(2-hydroxy-3-methoxybenzaldehyde thiosemicarbazonato)(γ-picoline)]molybdenum(VI) and dioxo[(2-hydroxy-3-methoxybenzaldehyde thiosemicarbazonato)(imidazole)]molybdenum(VI) were also characterized by single-crystal X-ray structural analysis. A spectrophotometric method for the determination of molybdenum based on extraction of ion-pairs formed by the cationic surfactant and the [MoO(SCN)₄]⁻ anion is described.     

New high permittivity tetragonal tungsten bronze dielectrics Ba2LaMNb4O15: M=Mn, Fe

The new phases Ba₂LaMNb₄O₁₅: M=Mn, Fe were prepared by solid state reaction at 1100 °C. They have the tetragonal tungsten bronze structure, space group P4/mbm, at room temperature. The two octahedral sites show partial order of M and Nb with preferential occupancy of the smaller B(1) sites by M. Both phases have high permittivities 90±15 over the range 10-320 K. Ba₂LaFeNb₄O₁₅ is highly insulating with bulk conductivity ?10⁻⁸ ohm⁻¹ cm⁻¹ at 25 °C and tan δ?0.001 over the range 100-320 K and at 10⁵ Hz. Solid solutions between these new phases and the compositionally and structurally related relaxor ferroelectric Ba₂LaTi₂Nb₃O₁₅ show gradual loss of ferroelectric behaviour attributed to replacement of polarisable Ti⁴⁺ by a mixture of (Mn, Fe)³⁺ and Nb⁵⁺.     

RGO/g-C3N4/MoS2复合材料的制备及其光催化性能

通过热解-水热两步法制备了石墨烯/石墨相氮化碳/二硫化钼(RGO/g-C_3N_4/MoS_2)复合材料并使用多种分析表征手段对RGO/g-C_3N_4/MoS_2的结构、形貌及光催化性能进行分析。结果表明,具有异质结构的g-C_3N_4/MoS_2与RGO复合后,通过良好的界面接触和电荷的快速转移,增强了其光生电子-空穴的分离。经可见光照射120 min后,RGO/g-C_3N_4/MoS_2复合材料可降解97%亚甲基蓝。此外,循环实验表明RGO/g-C_3N_4/MoS_2复合材料具有良好的稳定性,经5次循环仍能保持93.2%的光催化活性。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

纳米多孔Ni、Ni3S2/Ni复合电极的制备及其电催化析氢性能

采用脱合金化和水热合成的方法制备纳米多孔Ni和纳米多孔Ni₃S₂/Ni复合电极。通过N₂吸附-脱附测试、XRD、SEM、TEM等方法表征电极的孔径分布、物相和微观结构。在1 mol·L^-1的NaOH溶液中,运用线性扫描伏安（LSV）曲线、交流阻抗（EIS）谱图、恒电流电解法等测试电极的电催化析氢性能。结果表明：在电流密度为50 mA·cm^-2时,与纳米多孔Ni相比,Ni₃S₂/Ni合金具有更低的析氢过电位以及更高的析氢活性,同时纳米多孔Ni₃S₂/Ni复合电极具有更低表观活化能和电子转移阻抗,进一步明确了过渡金属硫化物对电催化析氢性能的特殊贡献。     

纳米多孔Ni、Ni3S2/Ni复合电极的制备及其电催化析氢性能

采用脱合金化和水热合成的方法制备纳米多孔Ni和纳米多孔Ni₃S₂/Ni复合电极。通过N2吸附-脱附测试、XRD、SEM、TEM等方法表征电极的孔径分布、物相和微观结构。在1 mol·L^-1的NaOH溶液中,运用线性扫描伏安(LSV)曲线、交流阻抗(EIS)谱图、恒电流电解法等测试电极的电催化析氢性能。结果表明:在电流密度为50 mA·cm^-2时,与纳米多孔Ni相比,Ni₃S₂/Ni合金具有更低的析氢过电位以及更高的析氢活性,同时纳米多孔Ni₃S₂/Ni复合电极具有更低表观活化能和电子转移阻抗,进一步明确了过渡金属硫化物对电催化析氢性能的特殊贡献。     

氧化铬柱层状三氧化钼的合成

采用醋酸铬[Cr(OAc)~3]水溶液与具有层状结构的钼青铜{[Na(H~2O)~5]~0~.~2~5MoO~3]进行离子交换瓜制得铬齐聚体柱撑的层状氧化钼化合物。经350℃焙烧后,首次得到了多孔高比表面积的氧化铬柱层状氧化钼材料。通过XRD,TEM,DTA和BET测试手段对其进行了表征,并考察了350℃时不同的焙烧气氛对产物层间距和表面积等的影响。结果表明,在不同气氛中焙烧,产物层间距相同(1.092nm),但比表面积有很大的变化,其中,在含4%(体积分数)氧气的氮氧混合气中焙烧,获得的样品比表面积(BET)最大,达82.4m^2·g^-^1,平均孔径为6.42nm。     

Large‐scale Two‐dimensional MoSx Catalyst Prepared under Mild Conditions for Enhancing Electrocatalytic Hydrogen Evolution Reaction

As an electrocatalyst with abundant resources and great potential, molybdenum disulfide is regarded as one of the most likely alternatives to expensive noble‐metals catalysts. However, it is still a challenge to achieve large scale production of few‐layer MoS₂ with enhancing activity of electrocatalytic hydrogen reaction at ambient conditions. Herein, we developed a simple environmentally friendly two‐step method, which included intercalation reaction and a subsequent electrochemical reduction reaction for mass preparation of defect‐rich desulfurized MoS_x (D?MoS_x) nanosheets with plentiful sulfur vacancies. The ratio of sulfur‐molybdenum atoms can be adjusted from 2 : 1 to 1.4 : 1 by regulating the desulfurization voltage. It was found that the HER catalytic activity of the D?MoS_x was enhanced compared with that of pristine MoS₂ (P?MoS₂), the current density of D?MoS_x (desulfurization at ?1.0 V) at ?0.3 V versus RHE was about 169% of the P?MoS₂, and the Tafel slope decreased to 136 mV dec^?1. This method can be widely applied to large‐scale preparation of other two‐dimensional materials.     

Synthesis and crystal structure of [Th2(μ-SO4)2(DMSO)12]{[Mo3S7Br5(DMSO)]Br}2·2DMSO·PhCN

Crystallization from a ThBr₄/DMSO/(Et₄N)₂Mo₃S₇Br₆ mixture in benzonitrile gave [Th₂(µ-SO₄)₂×(DMSO)₁₂]{[Mo₃S₇Br₅(DMSO)]Br}₂·2DMSO·PhCN. The complex has an ionic structure. In the [Th₂(µ-SO₄)₂(DMSO)₁₂]⁴⁺ centrosymmetric binuclear cation, the metal atoms are bound by two sulfate bridges and are coordinated by DMSO oxygen atoms, the coordination polyhedron of thorium(IV) being a tricapped trigonal prism (c.n. 9). The [Mo₃S₇Br₅(DMSO)]^–cluster anion and the bromide ion form an ion pair with S_ax...Br^– short contacts, and the DMSO molecule is coordinated to one of the molybdenum atoms via the oxygen atom. The voids of the structure are filled with DMSO and PhCN solvate molecules, the latter being disordered over two positions related by an inversion center.Original Russian Text Copyright © 2004 by M. N. Sokolov, O. A. Gerasko, S. F. Solodovnikov, and V. P. FedinTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 516–521, May–June 2004.