Crystal structure,NMR study,dielectric relaxation and AC conductivity of a new compound [Cd3(SCN)2Br6(C2H9N2)2]n

The crystal structure, the ¹³C NMR spectroscopy and the complex impedance have been carried out on [Cd₃(SCN)₂Br₆(C₂H₉N₂)₂]_n. Crystal structure shows a 2D polymeric network built up of two crystallographically independent cadmium atoms with two different octahedral coordinations. This compound exhibits a phase transition at (T=355±2 K) which has been characterized by differential scanning calorimetry (DSC), X-rays powder diffraction, AC conductivity and dielectric measurements. Examination of ¹³C CP/MAS line shapes shows indirect spin–spin coupling (¹⁴N and ¹³C) with a dipolar coupling constant of 1339 Hz. The AC conductivity of this compound has been carried out in the temperature range 325–376 K and the frequency range from 10⁻² Hz to 10 MHz. The impedance data were well fitted to two equivalent electrical circuits. The results of the modulus study reveal the presence of two distinct relaxation processes. One, at low frequency side, is thermally activated due to the ionic conduction of the crystal and the other, at higher frequency side, gradually disappears when temperature reaches 355 K which is attributed to the localized dipoles in the crystal. Moreover, the temperature dependence of DC-conductivity in both phases follows the Arrhenius law and the frequency dependence of σ(ω,T) follows Jonscher's universal law. The near values of activation energies obtained from the conductivity data and impedance confirm that the transport is through the ion hopping mechanism.     

Dielectric and AC conductivity behavior of BaBi2Nb2O9 ceramics

The complex dielectric and AC conductivity response of BaBi₂Nb₂O₉ relaxor ferroelectric ceramics were studied as a function of frequency (100 Hz-10 MHz) at various temperatures. The observed dielectric behavior was characterized by two types of relaxation processes which were described by the ‘universal relaxation law’. The frequency dependence of conductivity which showed a classical relaxor behavior followed the Jonscher's universal law σ(ω)=σ₀+Aωⁿ. The exponent n exhibited a minimum in the vicinity of temperatures of dielectric anomaly while the pre-factor A showed a maximum. The temperature dependence of n followed the Vogel-Fulcher relation with activation energy of about 0.14 eV.     

Frequency dependence of ionic conductivity and dielectric relaxation studies in Na3H(SO4)2 single crystal

Electrical impedance measurements of Na₃H(SO₄)₂ were performed as a function of both temperature and frequency. The electrical conductivity and dielectric relaxation have been evaluated. The temperature dependence of electrical conductivity reveals that the sample crystals transformed to the fast ionic state in the high temperature phase. The dynamical disordering of hydrogen and sodium atoms and the orientation of SO₄ tetrahedra results in fast ionic conductivity. In addition to the proton conduction, the possibility of a Na⁺ contribution to the conductivity in the high temperature phase is proposed. The frequency dependence of AC conductivity is proportional to ω^s. The value of the exponent, s, lies between 0.85 and 0.46 in the room temperature phase, whereas it remains almost constant, 0.6, in the high-temperature phase. The dielectric dispersion is examined using the modulus formalism. An Arrhenius-type behavior is observed when the crystal undergoes the structural phase transition.     

Dielectric properties and relaxation behavior of [TMA]2Zn0.5Cu0.5Cl4 compound

The [TMA]₂Zn_0.5Cu_0.5Cl₄ hybrid material was prepared and its dielectric spectra were measured in the 10⁻¹ Hz-10⁶ Hz frequency range and 200-305 K temperature interval. The dielectric permittivity showed a ferroelectric-paraelectric phase transition at 293 K. Double relaxation peaks are observed in the imaginary part of the electrical modulus, suggesting the presence of grain and grain boundary in the sample. The frequency dependent conductivity was interpreted in term of Jonscher's law: σ(ω)=σ_dc+Aωⁿ. The temperature dependent of the dc conductivity (σ_dc) was well described by the Arrhenius equation: σ_dcT=σ_o×exp(−E_a/kT).     

Structural and impedance properties of Ca3Nb2O8 ceramics

Polycrystalline sample of Ca₃Nb₂O₈ was prepared by a high-temperature solid-state reaction technique. X-ray diffraction (XRD) analysis confirms the formation of single-phase compound of hexagonal (rhombohedral) crystal structure at room temperature. Scanning electron micrograph of the material showed uniform grain distribution on the surface of the sample. Detailed studies of dielectric properties of the compound, studied in a wide frequency range (10²-10⁶ Hz) at different temperatures (25-500 °C), exhibit a dielectric anomaly suggesting phase transition of ferroelectric-paraelectric and structural type at 300 °C. Electrical properties of the material were analyzed using a complex impedance technique. The Nyquists plot showed the presence of bulk effect in the material in the studied temperature range. Studies of electrical conductivity over a wide temperature range suggest that the compound has negative temperature coefficient of resistance behavior.     

Effect of Pb on the electrical properties of a-Ge20Se80 glasses

The present paper reports the effect of Pb impurity (low ∼2 at% and high ∼10 at%) on the ac conductivity (σ_ac) of a-Ge₂₀Se₈₀ glass. Frequency-dependent ac conductance and capacitance of the samples over a frequency range ∼100 Hz to 50 kHz have been taken in the temperature range ∼268 to 358 K. At frequency 2 kHz and temperature 298 K, the value of σ_ac increases at low as well as at higher concentration of Pb. σ_ac is proportional to ω^s for undoped and doped samples. The value of frequency exponent (s) decreases as the temperature increases. The static permittivity (ε_s) increases at both Pb concentrations. These results have been explained on the basis of some structural changes at low and higher concentration of Pb impurity.     

Relaxation and conductivity behaviour in the compounds: FeRGe2O7 (R=Pr,Tb)

AC measurements were performed on the thortveitite-like layered compounds, FeRGe₂O (R=Pr,Tb) in order to study their dielectric features, e.g. as a function of temperature. The main electrical response lies on impedance plots composed of two successive arcs with depressed centers. Bulk conductivity behavior is mostly Arrhenius for the measured temperatures. The associated bulk activation energies are close to 1 eV. Raw data were used to follow the temperature dependence of the dynamic parameters, ε′(ω) and σ′(ω). From logarithmic σ′(ω) vs. ω curves the dc component was obtained. ε′(ω) vs. log ω curves exhibit a dispersive behavior at low frequencies, reflecting blocking effects. E_dc and E_ac activation energies were also calculated, the last one obtained from σ′(ω) vs. 1000/T plots. Conductivity results suggest the occurrence of an extrinsic conducting mechanism. A structural instability was detected via the temperature dependence of permittivity, which has been ascribed to the presence of Ga-O-Ga bonds having associated angles different of 180°. Analyses of the results show that the interchange of Tb and Pr in the general formula FeRGe₂O₇ (R=Pr, Tb) involves only small differences in their global ac and dc behavior.     

High pressure behaviour of KHSO4 studied by electrical impedance spectroscopy

Measurements of the electrical conductivity were performed in KHSO₄ at pressures between 0.5 and 2.5 GPa and in the temperature range 120-350 °C by the use of the impedance spectroscopy. The temperatures of the α-β phase transition (T_Tr) and of the melting (T_m), determined from the Arrhenius plots ln(σT) vs. 1/T, increase with pressure up to 1.5 GPa having dT/dP∼+45 K/GPa. Above the pressure 1.5 GPa, the pressure dependencies of T_Tr and T_m are negative dT/dP∼−45 K/GPa. At pressures above 0.5 GPa, the reversible decomposition of KHSO₄ into K₃H(SO₄)₂+H₂SO₄ (and probably into K₅H₃(SO₄)₄+H₂SO₄) affects the electrical conductivity of KHSO₄, with the typical values of the protonic electrical conductivity, c. 10⁻¹ S/cm at 2.5 GPa.     

Electrical and thermal studies in the commensurate incommensurate phase region of (NH4)2ZnCl4 single crystal

DC electrical conductivity for a virgin and poled annealed (NH₄)₂ZnCl₄b-axis single crystal shows a defect controlled property. A Schottky mechanism is a probable mechanism of conduction in regions of strong structural transitions. The rise of conductivity in the incommensurate and paraelectric phases is linked to an increase in discommensurations density. The activation energies (ΔE) in the three phases region were calculated. DTA measurements shows that the crystal is stable up to 200 °C and the phase transition temperatures were observed at 42, 94.8 and 137 °C. The effective activation energy (E_e) was obtained using Kissinger and Mahadevan equations. It was found to be equal to 0.49 eV. This correlates with the value obtained through DC conductivity.     

Conduction behaviour and thermoelectric power of Agx (As0.4Se0.6) 100−x chalcogenide system

Chalcogenide bulk alloys of Ag_x (As_0.4Se_0.6) _100−x (x=5, 7.5, 10, 12.5, 15 and 17.5) system were prepared by the conventional melt-quench technique. The d.c. electrical conductivity (σ) and thermoelectric power (TEP) measurements were carried out in the temperature range from 83 to 373 K and from 253 to 373 K, respectively. Variations of both σ and TEP with ambient temperature proved the p-type semiconducting behaviour of these materials. The current density-electric field characteristics were found to be linear. The activation energies, calculated from both the electrical conductivity E_σ and thermoelectric power E_s, were found to be dependent on composition.     

Electrical properties of KTiOPO4 single crystal in the temperature range from −100 °C to 100 °C

The electrical property of a KTiOPO₄ single crystal was studied by means of a dielectric spectroscopy method in the temperature range from −100 to 100 °C. Dielectric dispersion began at a temperature, T_S=−80 °C. It is believed that this dielectric dispersion is related to the ionic hopping conduction, which arises mainly from the jumping of K⁺ ions. The activation energy concerned with hopping conduction is E_a∼0.20 eV above T_S. T_S=−80 °C can be the minimum temperature for the hopping K⁺ ion.     

Ionic to electronic dominant conductivity in Al2(WO4)3 at high pressure and high temperature

Electrical conduction and crystal structure of Al₂(WO₄)₃ at 400 °C have been studied as a function of pressure up to 5.5 GPa using impedance methods and synchrotron radiation X-ray diffraction, respectively. AC impedance spectroscopy and DC polarization measurements reveal an ionic to electronic dominant transition in electrical conductivity at a pressure as low as 0.9 GPa. Conductivity increases with pressure and reaches a maximum at 4.0 GPa, where the conductivity value is 5 orders of magnitude greater than the 1 atm value. Upon decompression, the conductivity retains the maximum value until the sample is cooled at 0.5 GPa. The high pressure-temperature X-ray diffraction results show that the lattice parameters decrease as pressure increases and the crystal structure undergoes an orthorhombic to tetragonal-like transformation at a pressure ∼3.0 GPa. The change of conduction mechanism from ionic to electronic may be explained by means of pressure-induced valence change of W⁶⁺→W⁵⁺, which results in electron transfer between W⁵⁺-W⁶⁺ sites at high pressure.     

Thermal, electrical, and electrochemical properties of Lanthanum-doped Ba0.5Sr0.5 Co0.8Fe0.2O3-δ

Crystal structure, thermogravimetry (TG), thermal expansion coefficient (TEC), electrical conductivity and AC impedance of (Ba_0.5Sr_0.5)_1-xLa_xCo_0.8Fe_0.2O_3-δ (BSLCF; 0.05?x?0.20) were studied in relation to their potential use as intermediate temperature solid oxide fuel cell (IT-SOFC) cathode. A single cubic pervoskite was observed by X-ray diffraction (XRD). The TEC of BSLCF was increasing slightly with the increasing content of La, and all the compounds showed abnormal expansion at high temperature. Proved by the TG result, it was associated with the loss of lattice oxygen. The electrical conductivity, which is the main defect of Ba_0.5Sr_0.5 Co_0.8Fe_0.2O_3-δ (BSCF), was improved by La doping, e.g., the compound of x=0.20 demonstrated a conductivity of σ=376 S cm⁻¹ at 392 °C. The increase of electrical conductivity resulted from the increased concentration of charge carrier induced by La doping. In addition, the AC impedance revealed the better electrochemical performance of BSLCF. For example, at 500 °C, the sample with composition x=0.15 yielded the resistance values of 2.12 Ω cm², which was only 46% of BSCF.     

Electrical properties of SrBi2(Nb0.5Ta0.5)2O9 ceramics

Aurivillius SrBi₂(Nb_0.5Ta_0.5)₂O₉ (SBNT 50/50) ceramics were prepared using the conventional solid-state reaction method. Scanning electron microscopy was applied to investigate the grain structure. The XRD studies revealed an orthorhombic structure in the SBNT 50/50 with lattice parameters a=5.522 Å, b=5.511 Å and c=25.114 Å. The dielectric properties were determined by impedance spectroscopy measurements. A strong low frequency dielectric dispersion was found to exist in this material. Its occurrence was ascribed to the presence of ionized space charge carriers such as oxygen vacancies. The dielectric relaxation was defined on the basis of an equivalent circuit. The temperature dependence of various electrical properties was determined and discussed. The thermal activation energy for the grain electric conductivity was lower in the high temperature region (T>303.6 °C, E_a−ht=0.47 eV) and higher in the low temperature region (T<303.6 °C, E_a−lt=1.18 eV).     

Manifestation of MnCl2 fillers incorporated into the polymer matrices in their dielectric properties

Polyethyl methacrylate (PEMA) films filled with different mass fractions of MnCl₂ were prepared using a casting method. The structural and electrical properties were studied. The filling content dependence of certain IR absorption bands was correlated with the obtained physical parameter characterizing the other properties. DC electrical resistivity (ρ) was measured in the temperature range 340-420 K for PEMA films filled with MnCl₂ fillers. An intrachain one-dimensional interpolaron hopping mechanism was assumed to interpret the electrical conduction. AC conductivity behavior of all the prepared samples was investigated over the frequency range (42-5M) Hz and under different isothermal stablilization in the temperature range 300-423 K. It suggested that the hopping mechanism might be playing an important role in the conduction process, in low temperature regime. The values of σ₀, A, and S satisfying the suitable fit of the conductivity data, as well as the corresponding (σ_DC).     

Dielectric relaxation in single crystal NH4H2PO4 in the high-temperature regime

The dispersion curves of the dielectric response in single crystal NH₄H₂PO₄ were obtained in the radio frequency range and below the high-temperature transition at T_p−160 °C. The results reveal dielectric relaxation at low frequency, which is about 10⁵ Hz at 70 °C, and it shifts to higher frequencies (∼3×10⁶ Hz) as the temperature increases. The relaxation frequency was determined from the peak obtained in the imaginary part of the permittivity as well as from the derivative of the real part of the permittivity. The activation energy E_a=0.55 eV, obtained from the relaxation frequency is very close to that derived from the dc conductivity. We suggest that this dielectric relaxation could be due to the proton jump and phosphate reorientation that cause distortion and change the local lattice polarizability inducing dipoles like      

AC conductivity and dielectric properties of bulk tungsten trioxide (WO3)

AC conductivity and dielectric properties of tungsten trioxide (WO₃) in a pellet form were studied in the frequency range from 42 Hz to 5 MHz with a variation of temperature in the range from 303 K to 463 K. AC conductivity, σ_ac(ω) was found to be a function of ω^s where ω is the angular frequency and s is the frequency exponent. The values of s were found to be less than unity and decrease with increasing temperature, which supports the correlated barrier hopping mechanism (CBH) as the dominant mechanism for the conduction in WO₃. The dielectric constant (ε′) and dielectric loss (ε″) were measured. The Cole–Cole diagram determined complex impedance for different temperatures.     

Electrical properties of TlGaTe2 single crystals under hydrostatic pressure

The effect of hydrostatic pressure (up to 0.82 GPa) on the electric properties of chain TlGaTe₂ single crystals has been investigated in the temperature range 77-296 K. It has been shown that pressure leads to a considerable increase of conductivity (σ_⊥) across the chains of TlGaTe₂ single crystals. Parameters of localized states in the band gap of TlGaTe₂ single crystal according to the low-temperature electrical measurements were obtained at various pressures.     

Electrical behaviour of Li2O-ZnO-SiO2 glass and glass-ceramics system

Sealing quality lithium zinc silicate (LZS) glasses of compositions (wt.%) (a) LZSL- Li₂O: 12.65, ZnO: 1.85, SiO₂: 74.4, Al₂O₃: 3.8, K₂O: 2.95, P₂O₅: 3.15, B₂O₃: 1.2 (low ZnO), and (b) LZSH- Li₂O: 8.9, ZnO: 24.03, SiO₂: 53.7, Na₂O: 5.42, P₂O₅: 2.95, B₂O₃: 5 (high ZnO) were prepared by conventional melt-quench technique and converted to glass-ceramics by controlled crystallization process. The electrical properties of these samples were measured using ac impedance spectroscopy technique over a frequency range of 10 Hz-15 MHz at several temperatures in the range of 323-673 K. The ac conductivity, dc conductivity, dielectric constant and loss factor were obtained from these measurements. The dc conductivity (σ_dc) follows the Arrhenius behaviour with temperature. It is observed that σ_dc in LZSL glass is significantly higher than in the LSZH glass and the activation energies for σ_dc for LZSL and LZSH glasses are 0.59 and 1.08 eV, respectively. It further observed that the conductivity value decreases nearly one order of magnitude on conversion to glass-ceramics. The behaviour is explained on the basis of distributions and nature of alkali ions and network structures in these samples.     

Immiscibility in the NiFe2O4-NiCr2O4 spinel binary

The solid solution behavior of the Ni(Fe_1−nCr_n)₂O₄ spinel binary is investigated in the temperature range 400-1200 °C. Non-ideal solution behavior, as exhibited by non-linear changes in lattice parameter with changes in n, is observed in a series of single-phase solids air-cooled from 1200 °C. Air-annealing for 1 year at 600 °C resulted in partial phase separation in a spinel binary having n=0.5. Spinel crystals grown from NiO, Fe₂O₃ and Cr₂O₃ reactants, mixed to give NiCrFeO₄, by Ostwald ripening in a molten salt solvent, exhibited single-phase stability down to about 750 °C (the estimated consolute solution temperature, T_cs). A solvus exists below T_cs. The solvus becomes increasingly asymmetric at lower temperatures and extrapolates to n values of 0.2 and 0.7 at 300 °C. The extrapolated solvus is shown to be consistent with that predicted using a primitive regular solution model in which free energies of mixing are determined entirely from changes in configurational entropy at room temperature.