Surface properties of hen egg yolk low-density lipoproteins spread at the air–water interface

Hen egg yolk is largely used as food ingredient notably because of its exceptional emulsifying properties. Low-density lipoproteins (LDL) are the main egg yolk constituent. LDL and particularly apoLDL are thought to control largely emulsifying properties of egg yolk-based products. Nevertheless, few studies have concerned the interfacial behaviour of these lipoproteins at the oil–water interface and nothing has been published about the air–water interface. Controversies still remain about LDL adsorption mechanism at the oil–water interface even if a widely spread theory suggests their breaking at the interface, allowing then their constituents to spread. The Langmuir film balance and atomic force microscopy (AFM) were used in this study in the aim to characterise LDL surface behaviour in dynamic conditions at the air–water interface. The understanding of LDL adsorption mechanism and surface organisation at the air–water interface should provide useful information about LDL behaviour at the oil–water interface. LDL and lipids extracted from LDL—neutral lipids, phospholipids and total lipids (mixture of the two previous species)—were spread at the air–water interface to clarify the role of each constituent in the lipoprotein film. Results clearly show that LDL are disrupted at the interface to release notably neutral lipids from the lipoprotein core, enabling then their spreading. Each lipid class has been identified on the LDL film isotherm and seems to behave independently and individually at the interface within the lipoprotein film.     

Interfacial characteristics of β-casein spread films at the air–water interface

Casein is well known to be a good protein emulsifier and β-casein is the major component of casein and commercial sodium caseinate. This work studies the behaviour of β-casein at the interface. The interfacial characteristics (structure and stability) of β-casein spread films have been examined at the air–water interface in a Langmuir-type film balance, as a function of temperature (5–40°C) and aqueous phase pH (pH 5 and 7). From surface pressure–area isotherms (π–A isotherms) as a function of temperature we can draw a phase diagram. β-Casein spread films present two structures and the collapse phase. That is, there is a critical surface pressure and a surface concentration at which the film properties change significantly. This transition depends on the temperature and the aqueous phase pH. The film structure was observed to be more condensed and β-casein interfacial density was higher at pH 5. β-Casein films were stable at surface pressures lower than equilibrium surface pressure. In fact, no hysteresis was observed in π–A isotherms after continuous compression-expansion cycles or over time. The relative area relaxation at constant surface pressure (10 or 20 mN m⁻¹) and the surface pressure relaxation at constant area near the monolayer collapse, can be fitted by two exponential equations. The characteristic relaxation times in β-casein films can be associated with conformation–organization changes, hydrophilic group hydration and/or surface rheology, as a function of pH.     

Detachment of colloids from a solid surface by a moving air-water interface

Colloid attachment to liquid–gas interfaces is an important process used in industrial applications to separate suspended colloids from the fluid phase. Moving gas bubbles can also be used to remove colloidal dust from surfaces. Similarly, moving liquid–gas interfaces lead to colloid mobilization in the natural subsurface environment, such as in soils and sediments. The objective of this study was to quantify the effect of moving air–water interfaces on the detachment of colloids deposited on an air-dried glass surface, as a function of colloidal properties and interface velocity. We selected four types of polystyrene colloids (positive and negative surface charge, hydrophilic and hydrophobic). The colloids were deposited on clean microscope glass slides using a flow-through deposition chamber. Air–water interfaces were passed over the colloid-deposited glass slides, and we varied the number of passages and the interface velocity. The amounts of colloids deposited on the glass slides were visualized using confocal laser scanning microscopy and quantified by image analysis. Our results showed that colloids attached under unfavorable conditions were removed in significantly greater amounts than those attached under favorable conditions. Hydrophobic colloids were detached more than hydrophilic colloids. The effect of the air–water interface on colloid removal was most pronounced for the first two passages of the air–water interface. Subsequent passages of air–water interfaces over the colloid-deposited glass slides did not cause significant additional colloid removal. Increasing interface velocity led to decreased colloid removal. The force balances, calculated from theory, supported the experimental findings, and highlight the dominance of detachment forces (surface tension forces) over the attachment forces (DLVO forces).     

Interfacial and foaming properties of prolylenglycol alginates. Effect of degree of esterification and molecular weight

In the present work we have studied the characteristics of propylene glycol alginates (PGA) adsorption at the air–water interface and the viscoelastic properties of the films in relation to its foaming properties. To evaluate the effect of the degree of PGA esterification and viscosity, different commercial samples were studied—Kelcoloid O (KO), Kelcoloid LVF (KLVF) and Manucol ester (MAN). The temperature (20 °C) and pH (7.0) were maintained constant. For time-dependent surface pressure measurements and surface dilatational properties of adsorbed PGA at the air–water interface an automatic drop tensiometer was used. The foam was generated by whipping and then the foam capacity and stability was determined. The results reveal a significant interfacial activity for PGA due to the hydrophobic character of the propylene glycol groups. The kinetics of adsorption at the air–water interface can be monitored by the diffusion and penetration of PGA at the interface. The adsorbed PGA film showed a high viscoelasticity. The surface dilatational modulus depends on the PGA and its concentration in the aqueous phase. Foam capacity of PGA solutions increased in the order KO > MAN > KLVF, which followed the increase in surface pressure and the decrease in the viscosities of PGA solutions. The stability of PGA foams monitored by the drainage rate and collapse time follows the order MAN > KLVF > KO. The foam stability depends on the combined effect of molecular weight/degree of esterification of PGA, solution viscosity and viscoelasticity of the adsorbed PGA film.     

Self-Organization of Lipid-Porphyrin Conjugates at the Air/Water Interface

Lipid-porphyrin conjugates are versatile compounds which can self-assemble into liposome-like structures with multifunctional properties. Most of the conjugates that have been described so far, consisted in grafting pyropheophorbide-a (Pyro-a) or other porphyrin derivatives through the esterification of the hydroxyl group in the sn-2 position of a lysophosphatidylcholine. However, despite the versatility of these conjugates, less is known about the impact of the lipid backbone structure on their 2D phase behavior at the air/water interface and more precisely on their fine structures normal to the interface as well as on their in-plane organization. Herein, we synthesized a new lipid-porphyrin conjugate (PyroLSM) based on the amide coupling of Pyro-a to a lysosphingomyelin backbone (LSM) and we compared its interfacial behavior to that of Pyro-a and Pyro-a conjugated lysophosphatidylcholine (PyroLPC) using Langmuir balance combined to a variety of other physical techniques. Our results provided evidence on the significant impact of the lipid backbone on the lateral packing of the conjugates as well as on the shape and size of the formed domains. Compared to Pyro-a and PyroLPC monolayers, PyroLSM exhibited the highest lateral packing which highlights the role of the lipid backbone in controlling their 2D organization which in turn may impact the photophysical properties of their assemblies.     

New sights into the electrochemical interface provided by in situ X-ray absorption fine structure and surface X-ray scattering

Various important processes, such as electron transfer reactions, adsorption/desorption, solvation/desolvation, and formation/cleavage of chemical bonds, take place at electrolyte/electrode interfaces during electrocatalytic reactions. Those processes have been understood on the basis of changes in the surface composition, atomic arrangement, and molecular and electronic structures of the interfaces by using various in situ analysis techniques. To date, in situ analysis and observation of those interfacial processes at an ideal single-crystal surface are indispensable not only for fundamental understanding of the reaction mechanism but also for rational design of the highly efficient and durable electrocatalytic materials. Here, historical and recent progress of in situ studies on electrocatalytic reactions is briefly reviewed with a focus on two major techniques, X-ray absorption fine structure and surface X-ray scattering.     

Long-Range Lateral Correlation between Self-Assembled Domains of Fluorocarbon-Hydrocarbon Tetrablocks by Quantitative GISAXS

The structure and lateral correlation of fluorocarbon-hydrocarbon tetrablock di(F10Hm) domains at the air/water interface have been determined by quantitative analysis of grazing incidence small-angle X-ray scattering (GISAXS) data. The measured GISAXS signals can be well represented by the full calculation of the form and structure factors. The form factor suggests that di(F10Hm) domains take a hemiellipsoid shape. Both major and minor axes of the hemiellipsoids monotonically increased in response to the elongation of the hydrocarbon blocks, which can be explained by the concominant increase in van der Waals interaction. The structure factor calculated from the GISAXS signals suggests that the domains take an orthorhombic lattice. Remarkably, the lateral correlation can reach over a distance that is more than 14 times longer than the distance to the nearest neighbors. Our data suggest that quantitative GISAXS enables the optimal design of mesoscopic self-assemblies at the air/water interface by fine-tuning of the structures of molecular building blocks.     

阴离子Gemini表面活性剂在油/水界面行为的分子动力学模拟

采用分子动力学方法研究了磺酸盐型阴离子Gemini表面活性剂在油/水界面的吸附行为, 考察了不同长度的连接基(Spacer)对表面活性剂在界面的聚集形态及界面性质的影响. 密度分布和微观结构信息显示, Gemini表面活性剂能在油/水界面形成单层膜结构. Gemini表面活性剂能使油/水界面的厚度显著增大, 并使界面形成能降低. 当连接基为6个碳时, 此类磺酸盐型Gemini表面活性剂的界面厚度最大, 形成的界面最稳定. 连接基长度对Gemini表面活性剂单层膜周围的水分子和Na⁺的吸附结构影响不大, 但是能影响水分子的扩散行为.     

Surfactant-mediated formation of alginate layers at the water-air interface

The self-organization process of polysaccharide alginate with different cationic surfactants at the water-air interface was investigated over a wide concentration regime. The changes of surface properties determined by surface tension measurements, surface rheology, and X-ray reflectivity are correlated with changes of bulk properties measured by turbidity, light scattering, and zeta potential measurements. We demonstrate that the interactions between the alginate and cationic surfactants result in significant changes of bulk and interfacial properties. The results of surface shear experiments point to the existence of highly viscoelastic interfacial films. In combination with X-ray reflectivity, we demonstrate that these rheological features are related to polymer-surfactant associations at the interface. In the regime of high surfactant concentrations, we observed the existence of multilayer structures.     

Molecular Structure and Dynamics of Water at the Water–Air Interface Studied with Surface‐Specific Vibrational Spectroscopy

Water interfaces provide the platform for many important biological, chemical, and physical processes. The water–air interface is the most common and simple aqueous interface and serves as a model system for water at a hydrophobic surface. Unveiling the microscopic (<1 nm) structure and dynamics of interfacial water at the water–vapor interface is essential for understanding the processes occurring on the water surface. At the water interface the network of very strong intermolecular interactions, hydrogen‐bonds, is interrupted and the density of water is reduced. A central question regarding water at interfaces is the extent to which the structure and dynamics of water molecules are influenced by the interruption of the hydrogen‐bonded network and thus differ from those of bulk water. Herein, we discuss recent advances in the study of interfacial water at the water–air interface using laser‐based surface‐specific vibrational spectroscopy.     

Water density in the electric double layer at the insulator/electrolyte solution interface

I studied the spatial structure of the thick transition region between n-hexane and a colloidal solution of 7-nm silica particles by X-ray reflectivity and grazing incidence small-angle scattering. The interfacial structure is discussed in terms of a semiquantitative interface model wherein the potential gradient at the n-hexane/sol interface reflects the difference in the potentials of "image forces" between the cationic Na(+) and anions (nanoparticles) and the specific adsorption of surface charge at the interface between the adsorbed layer and the solution, as well as at the interface between the adsorbed layer and n-hexane. The X-ray scattering data revealed that the average density of water in the field approximately 10(9)-10(10) V/m of the electrical double layer at the hexane/silica sol interface is the same as, or only few percent higher (1-7%) than, its density under normal conditions.     

空气/水界面单分子膜的弹性

空气／水界面单分子膜的弹性是与膜应用有关的一个重要力学性质。本文对最近十几年来空气／水界面单分子膜的弹性的研究情况进行了综述,着重介绍X射线衍射法（XRD）、动态振动测量法、表面光散射法（SLS）、电生毛细波衍射法（ECWD）等空气／水界面单分子膜弹性的测量技术。     

Cryo‐XPS: probing intact interfaces in nature and life

Experimental studies of solid–aqueous solution interfaces are of great importance for reaching a better chemical understanding of interfacial phenomena at the molecular level. This perspective article presents a recently developed approach for investigation of intact interfaces, based on fast freezing of centrifuged wet pastes followed by traditional XPS measurements at liquid nitrogen temperatures. Sample preparation and handling protocols, applicable to any suspension or gel, are discussed in detail. For mineral suspensions, cryogenic XPS is an important complement to traditional analyses of supernatant solutions and dry solids that is capable of revealing novel insights of the electrical double layer in terms of structure and composition. It can be used to study changes in the biochemistry of bacterial cell walls as influenced by external stimuli, and interfacial features related to biocompatibility of implant materials. Herein we review how the technique has been applied to minerals in electrolyte solutions, intact bacterial surfaces, and biomaterial interfaces in biologically relevant media, and highlight some future requirements for development of interface analysis methodologies. Copyright © 2016 John Wiley & Sons, Ltd.     

Salt effects on the dilational viscoelasticity of surfactant adsorption layers

Interfacial rheology of adsorbed layers of surfactants, demonstrating the response of the interface to interfacial deformations, plays a key role in formation and stability of foams and emulsions. It also provides insights into complex surfactant systems in different applications, in particular, medical treatments and diagnostics. The response of the interface is mainly determined by the composition of a surfactant system, the equilibrium and kinetic adsorption properties of the included surface-active compounds and their interaction within the adsorption layer. The subject of ongoing investigations is interfacial rheology of surfactant layers in the presence of inorganic ions. Although these ions have no surface activity, they can strongly influence the interfacial rheological properties owing to their interaction with the surface-active molecules.This work aims to present recent developments in the interfacial rheology of surfactant adsorbed layers at liquid–fluid interfaces in the presence and absence of salts, highlighting the state of the art of experimental and theoretical works in this area. We highlight drawbacks of recently developed techniques for measuring dilational interfacial properties of surfactant layers, compared with previous techniques. Moreover, this review shows the dearth of research on the ion-specific effect on the interfacial rheology of surfactant layers. This demonstrates the necessity of further investigation of the effect of ion specificity on interfacial viscoelasticity.     

Light scattering near and from interfaces using evanescent wave and ellipsometric light scattering

The broad range of interface light scattering investigations in recent years shows the power and the versatility of these techniques to address new and open questions in colloid and interface science and the soft condensed matter field. Structural information for polymers, liquid crystals, or colloids close to planar or spherical colloidal interfaces are either captured with long range light scattering resolution, or in a complementary approach by high resolution ellipsometric techniques. Of special interest is the dynamic behavior close to or in interfaces, since it determines material properties and responses to external fields. Due to the broad dynamical range and the high scattering contrast for visible light, interface light scattering is a key to elucidate soft matter interfacial dynamics. This contribution reviews experimental and related theoretical approaches for interface light scattering and further gives an overview of achievements based on such techniques.     

Polyelectrolyte/surfactant mixtures at the air–solution interface

This review presents some of the recent developments in our understanding of the behaviour of polyelectrolyte/surfactant mixtures at the air–solution interface. The existence of a strong surface polyelectrolyte/surfactant interaction results in a complex pattern of surface adsorption. Recent studies, using a range of surface sensitive techniques, which include ellipsometry, neutron and X-ray reflectivity, surface tension and interfacial rheology, have considerably enhanced the understanding of their surface behaviour, which can be rationalized in terms of the competition between the formation of surface active polymer/surfactant complexes and solution polymer/surfactant micelle complexes.     

Adsorption kinetics of some carotenoids at the oil/water interface

The kinetic analysis of the adsorption of two carotenoids (i.e., ethyl ester of β-apo-8′-carotenoic acid and β-carotene, all trans-isomers) from n-hexane solutions at the oil/water interface is presented for several carotenoid concentrations in the oil phase. A new kinetic approach is developed and it addresses the diffusion adsorption associated with a reversible interfacial reaction, which describes the reorientation of surfactant molecules between two conformations. This approach leads to a general analytical expression that contains four physical parameters and describes with high accuracy the experimental dynamic interfacial tensions for the two carotenoids, which independently adsorb from n-hexane phase to the n-hexane/water interface. The calculations give the characteristic times for the carotenoid adsorption at the oil/water interface in terms of diffusion relaxation and kinetic relaxation times. The results explain the long time effects on the adsorption of these carotenoids at the oil/water interface. The data are in substantial agreement with the molecular structure of these carotenoids and with the earlier data recorded for cholesterol adsorption at the n-heptane/water interface. Based on these findings, we propose a molecular mechanism for the interfacial transformation of carotenoid molecules at a hydrophobic/hydrophilic interface.     

Ion adsorption at the rutile-water interface: linking molecular and macroscopic properties

A comprehensive picture of the interface between aqueous solutions and the (110) surface of rutile (alpha-TiO2) is being developed by combining molecular-scale and macroscopic approaches, including experimental measurements, quantum calculations, molecular simulations, and Gouy-Chapman-Stern models. In situ X-ray reflectivity and X-ray standing-wave measurements are used to define the atomic arrangement of adsorbed ions, the coordination of interfacial water molecules, and substrate surface termination and structure. Ab initio calculations and molecular dynamics simulations, validated through direct comparison with the X-ray results, are used to predict ion distributions not measured experimentally. Potentiometric titration and ion adsorption results for rutile powders having predominant (110) surface expression provide macroscopic constraints of electrical double layer (EDL) properties (e.g., proton release) which are evaluated by comparison with a three-layer EDL model including surface oxygen proton affinities calculated using ab initio bond lengths and partial charges. These results allow a direct correlation of the three-dimensional, crystallographically controlled arrangements of various species (H2O, Na+, Rb+, Ca2+, Sr2+, Zn2+, Y3+, Nd3+) with macroscopic observables (H+ release, metal uptake, zeta potential) and thermodynamic/electrostatic constraints. All cations are found to be adsorbed as "inner sphere" species bonded directly to surface oxygen atoms, while the specific binding geometries and reaction stoichiometries are dependent on ionic radius. Ternary surface complexes of sorbed cations with electrolyte anions are not observed. Finally, surface oxygen proton affinities computed using the MUSIC model are improved by incorporation of ab initio bond lengths and hydrogen bonding information derived from MD simulations. This multitechnique and multiscale approach demonstrates the compatibility of bond-valence models of surface oxygen proton affinities and Stern-based models of the EDL structure, with the actual molecular interfacial distributions observed experimentally, revealing new insight into EDL properties including specific binding sites and hydration states of sorbed ions, interfacial solvent properties (structure, diffusivity, dielectric constant), surface protonation and hydrolysis, and the effect of solution ionic strength.     

The metal–solution interface

This article reviews our present understanding of the metal–solution interface, drawing comparisons between it and the metal–gas interface. The chief difference between these two systems is the solvent, which has a profound effect on the physics and chemistry of the interface. The solvent is never entirely inert, and if polar, as water is, will adsorb on the metal surface and stabilise ions in solution. However, the presence of ions in solution allows a current to be passed between two electrodes inserted in the solution, and one of these electrodes can be the metal under investigation. This is the field of electrochemistry, and much of our knowledge of the metal–solution interface is derived from electrochemical measurements. Complementary information is gained from many of the techniques used to study the metal–gas interface. The first type of electrochemical system to be considered is one in which the application of a potential across the interface does not lead to charge transfer. Such a system behaves as a capacitance due to the formation of a complex double layer. The effects of various types of adsorption is then described. The deposition of metals on the electrode surface is next considered, and this is followed by a discussion of the reverse metal dissolution reaction. The final section concerns the formation of films on the metal surface, a reaction which has its parallel in metal–gas reactions.     

Composition and solution properties of fluorinated block copolymers and their surface structures in the solid state

A series of diblock copolymers composed of methyl methacrylate and 2-perfluorooctylethyl methacrylate (PMMA₁₄₄-b-PFMA _n ) with various PFMA block lengths were prepared by atom transfer radical polymerization (ATRP). The surface structures and properties of these polymers in the solid state and in solution were investigated using contact angle measurement, X-ray photoelectron spectroscopy (XPS), sum frequency generation (SFG) vibrational spectroscopy, surface tension and dynamic laser light scattering (DLS). It was found that with increasing PFMA block length, water and oil repellency decreased, the ratio of F/C increased with increasing film depth, and the degree of ordered packing of the perfluoroalkyl side chains at the surface decreased. When the number of PFMA block units reached 10, PMMA segments were detected at the copolymer surface, which was attributed to the PFMA block length affecting molecular aggregation structure of the copolymer in the solution and the interfacial structure at the air/liquid interface, which in turn affects surface structure formation during solution solidification. The results suggest that copolymer solution properties play an important role in structure formation on the solid surface. Supported by the National Natural Science Foundation of China (Grant Nos. 50573069 and 20704038) and Program for Changjiang Scholars and Innovative Research Team in University (Grant No.IRT 0654)