Synergistic Ternary Composite (Carbon/Fe3O4@Graphene) with Hollow Microspherical and Robust Structure for Li‐Ion Storage

The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy‐storage systems. 2D graphene‐wrapped hollow C/Fe₃O₄ microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double‐shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one‐pot approach and then transformed into C/Fe₃O₄@G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS‐derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe₃O₄ nanoparticles embedded in it. In the rationally constructed architecture of C/Fe₃O₄@G, the strongly coupled C/Fe₃O₄ hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe₃O₄, and graphene. As an anode material of Li‐ion batteries (LIBs), C/Fe₃O₄@G manifests a high reversible capacity, excellent rate behavior, and outstanding long‐term cycling performance (1208 mAh g^?1 after 200 cycles at 100 mA g^?1).     

Booting the electrochemical properties of Fe-based anode by the formation multiphasic nanocomposite for lithium-ion batteries

Fe-based compounds with good environmental friendliness and high reversible capacity have attracted considerable attention as anode for lithium-ion batteries.But,similar to other transition metal oxides(TMOs),it is also affected by large volume changes and inferior kinetics during redox reactions,resulting in the destruction of the crystal structure and poor electrochemical performance.Here,Fe_3O_4/C nanospheres anchored on the two-dimensional graphene oxide as precursors are phosphated and sintered to build the multiphasic nanocomposite.XRD results confirmed the multiphasic nanocomposite composed of Fe_2O_3,Fe_3O_4 and Fe_3PO_7,which will facilitate the Li~+ diffusion.And the carbonaceous matrix will buffer the volume changes and enhance electron conduction.Consequently,the multiphasic Febased anode delivers a large specific capacity of 1086 mAh/g with a high initial Coulombic efficiency of 87% at 0.1 C.It also has excellent cycling stability and rate property,maintaining a capacity retention of～87% after 300 cycles and a high reversible capacity of 632 mAh/g at 10 C.The proposed multiphasic structure offers a new insight into improving the electrochemical properties of TMO-based anodes for advanced alkali-ion batteries.     

Multilayered structure of N-carbonenvelopediron oxide/graphene nanocomposites as an improved anode for Li-ion battery

Transition metal oxides with high capacity are considered a promising electrode material for lithium-ion batteries (LIBs). Nevertheless, the huge volume expansion and poor conductivity severely hamper their practical application. In this work, a carbon riveting method is reported to address the above issues by designing multilayered N-doped carbon (N-carbon) enveloped Fe₃O₄/graphene nanosheets. When evaluated as a negative electrode, the N-carbon/Fe₃O₄/graphene nanocomposites demonstrate greatly enhanced electrochemical properties compared with Fe₃O₄/graphene. The N-carbon/Fe₃O₄/graphene presents a superior reversible capacity (807 mAh/g) over Fe₃O₄/graphene (540 mAh/g). Furthermore, it affords a considerable capacity of 550 mAh/g at 1 A/g over 700 cycles, indicating superb cycling stability. The structure-property correlation studies reveal that the carbon riveting layer is essential for enhancing the lithium diffusion kinetics. The good electrochemical properties and effective structure design make the carbon riveting strategy quite general and reliable to manipulate high performance electrodes for future LIBs.     

静电自组装方法合成的具有多孔三维网络结构的Fe3O4/石墨烯复合材料作为高性能锂离子电池负极材料

采用静电自组装方法,分两步合成Fe（OH）₃/GO前驱体（GO：氧化石墨烯）,再通过水热反应和600 ℃高纯氮气气氛下煅烧,获得了Fe₃O₄/石墨烯复合材料. 通过X射线衍射（XRD）、扫描电镜（SEM）、高分辨透射电镜（HRTEM）、拉曼（Raman）光谱等多种分析,发现该复合材料具有三维多孔石墨烯网络结构. 把合成的这种Fe₃O₄/石墨烯复合材料作为锂离子电池负极材料,电化学测试结果表明其具有优良的电化学性能：首次放电容量为1390 mAh·g^-1,50次循环后容量为819 mAh·g^-1. 通过对比实验表明,三维石墨烯网络结构的形成对复合材料的电化学循环稳定性起着关键作用.     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

Fe3O4@C Nanotubes Grown on Carbon Fabric as a Free-Standing Anode for High-Performance Li-Ion Batteries

Recently, Li-ion batteries (LIBs) have attracted extensive attention owing to their wide applications in portable and flexible electronic devices. Such a huge market for LIBs has caused an ever-increasing demand for excellent mechanical flexibility, outstanding cycling life, and electrodes with superior rate capability. Herein, an anode of self-supported Fe₃O₄@C nanotubes grown on carbon fabric cloth (CFC) is designed rationally and fabricated through an in situ etching and deposition route combined with an annealing process. These carbon-coated nanotube structured Fe₃O₄ arrays with large surface area and enough void space can not only moderate the volume variation during repeated Li⁺ insertion/extraction, but also facilitate Li⁺/electrons transportation and electrolyte penetration. This novel structure endows the Fe₃O₄@C nanotube arrays stable cycle performance (a large reversible capacity of 900 mA h g⁻¹ up to 100 cycles at 0.5 A g⁻¹) and outstanding rate capability (reversible capacities of 1030, 985, 908, and 755 mA h g⁻¹ at 0.15, 0.3, 0.75, and 1.5 A g⁻¹, respectively). Fe₃O₄@C nanotube arrays still achieve a capacity of 665 mA h g⁻¹ after 50 cycles at 0.1 A g⁻¹ in Fe₃O₄@C//LiCoO₂ full cells.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.     

Graphene-encapsulated Fe3O4 nanoparticles with 3D laminated structure as superior anode in lithium ion batteries

Fe₃O₄–graphene composites with three‐dimensional laminated structures have been synthesised by a simple in situ hydrothermal method. From field‐emission and transmission electron microscopy results, the Fe₃O₄ nanoparticles, around 3–15 nm in size, are highly encapsulated in a graphene nanosheet matrix. The reversible Li‐cycling properties of Fe₃O₄–graphene have been evaluated by galvanostatic discharge–charge cycling, cyclic voltammetry and impedance spectroscopy. Results show that the Fe₃O₄–graphene nanocomposite with a graphene content of 38.0 wt % exhibits a stable capacity of about 650 mAh g^?1 with no noticeable fading for up to 100 cycles in the voltage range of 0.0–3.0 V. The superior performance of Fe₃O₄–graphene is clearly established by comparison of the results with those from bare Fe₃O₄. The graphene nanosheets in the composite materials could act not only as lithium storage active materials, but also as an electronically conductive matrix to improve the electrochemical performance of Fe₃O₄.     

Highly Ordered Mesoporous Few‐Layer Graphene Frameworks Enabled by Fe3O4 Nanocrystal Superlattices

While great progress has been achieved in the synthesis of ordered mesoporous carbons in the past decade, it still remains a challenge to prepare highly graphitic frameworks with ordered mesoporosity and high surface area. Reported herein is a simple synthetic methodology, based on the conversion of self‐assembled superlattices of Fe₃O₄ nanocrystals, to fabricate highly ordered mesoporous graphene frameworks (MGFs) with ultrathin pore walls consisting of three to six stacking graphene layers. The MGFs possess face‐centered‐cubic symmetry with interconnected mesoporosity, tunable pore width, and high surface area. Because of their unique architectures and superior structural durability, the MGFs exhibit excellent cycling stability and rate performance when used as anode materials for lithium‐ion batteries, thus retaining a specific capacity of 520 mAh g^?1 at a current density of 300 mA g^?1 after 400 cycles.     

Regulating Lithium Plating and Stripping by Using Vertically Aligned Graphene/CNT Channels Decorated with ZnO Particles

Lithium (Li) metal is regarded as the ultimate anode material for use in Li batteries due to its high theoretical capacity (3860 mA h g⁻¹). However, the Li dendrites that are generated during iterative Li plating/stripping cycles cause poor cycling stability and even present safety risks, and thus severely handicap the commercial utility of Li metal anodes. Herein, we describe a graphene and carbon nanotube (CNT)-based Li host material that features vertically aligned channels with attached ZnO particles (designated ZnO@G-CNT-C) and show that the material effectively regulates Li plating and stripping. ZnO@G-CNT-C is prepared from an aqueous suspension of Zn(OAc)₂, CNTs, and graphene oxide by using ice to template channel growth. ZnO@G-CNT-C was found to be mechanically robust and capable of guiding Li deposition on the inner walls of the channels without the formation of Li dendrites. When used as an electrode, the material exhibits relatively low polarization for Li plating, fast Li-ion diffusion, and high Coulombic efficiency, even over hundreds of Li plating/stripping cycles. Moreover, full cells prepared with ZnO@G-CNT-C as Li host and LiFePO₄ as cathode exhibit outstanding performance in terms of specific capacity (155.9 mA h g⁻¹ at 0.5 C), rate performance (91.8 mA h g⁻¹ at 4 C), cycling stability (109.4 mA h g⁻¹ at 0.5 C after 800 cycles). The methodology described can be readily adapted to enable the use of carbon-based electrodes with well-defined channels in a wide range of contemporary applications that pertain to energy storage and delivery.     

Tin oxide-titanium oxide/graphene composited as anode materials for lithium-ion batteries

A tin oxide-titanium oxide/graphene (SnO₂-TiO₂/G) ternary nanocomposite as high-performance anode for Li-ion batteries was prepared via a simple reflux method. The graphite oxide (GO) was reduced to graphene nanosheet, and the SnO₂-TiO₂ nanocomposites were evenly distributed on the graphene matrix in the SnO₂-TiO₂/G nanocomposite. The as-prepared SnO₂-TiO₂/G nanocomposites were employed as anode materials for lithium-ion batteries, showing an outstanding performance with high reversible capacity and long cycle life. The composite delivered a superior initial discharge capacity of 1,594.6 mAh g^?1 and a reversible specific capacity of 1,500.3 mAh g^?1 at a current density of 100 mA g^?1. After 100 cycles, the reversible discharge capacity was still maintained at 1,177.4 mAh g^?1 at a current density of 100 mA g^?1 with a high retained rate of reversible capacity of 73.8 %. The addition of small amount of TiO₂ nanoparticles improved the cycling stability and specific capacity of SnO₂-TiO₂/G nanocomposite, obviously. The results demonstrate that the SnO₂-TiO₂/G nanocomposite is a promising alternative anode material for practical Li-ion batteries.     

Cobalt oxide–graphene nanocomposite as anode materials for lithium-ion batteries

Composites of Co₃O₄/graphene nanosheets are prepared and characterized by X-ray diffraction and scanning electron microscopy. Their electrochemical behavior as anode materials of lithium-ion rechargeable batteries is investigated by galvanostatic discharge/charge measurements and cyclic voltammetry. The composite is composed of Co₃O₄ nanorods (around 20–40 nm in diameter) and nanoparticles (around 10 nm in diameter) distributed within the graphene matrix. The specific capacity of the composite is higher than both Co₃O₄ and graphene nanosheets. The cycling stability of Co₃O₄ is obviously enhanced by compositing with graphene. After 100 cycles, the discharge and charge capacity of the composite is 1,005 and 975 mAh g⁻¹, respectively, and the irreversible capacity loss is less than 3%.

     

Cobalt oxide–graphene nanocomposite as anode materials for lithium-ion batteries

Composites of Co₃O₄/graphene nanosheets are prepared and characterized by X-ray diffraction and scanning electron microscopy. Their electrochemical behavior as anode materials of lithium-ion rechargeable batteries is investigated by galvanostatic discharge/charge measurements and cyclic voltammetry. The composite is composed of Co₃O₄ nanorods (around 20??0?nm in diameter) and nanoparticles (around 10?nm in diameter) distributed within the graphene matrix. The specific capacity of the composite is higher than both Co₃O₄ and graphene nanosheets. The cycling stability of Co₃O₄ is obviously enhanced by compositing with graphene. After 100 cycles, the discharge and charge capacity of the composite is 1,005 and 975?mAh g^??, respectively, and the irreversible capacity loss is less than 3%.     

金属有机框架衍生的高性能锂离子电池负极Co3O4/C复合材料

为克服Co_3O_4负极材料导电率低、循环稳定性差的缺点,选择Co_2(NDC)_2DMF_2(NDC=1,4-萘二甲酸根)为前驱体采用两步煅烧工艺,制备了具有高碳含量的Co_3O_4/C复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和拉曼光谱对样品进行了表征。采用热重分析法(TGA)测定了Co_3O_4/C中非晶态碳的含量。作为锂离子电池的负极材料,Co_3O_4/C具有高的可逆比容量、优异的循环性能(在200 m A·g~(-1)的电流密度下,循环200圈后放电比容量稳定保持在1 000 mAh·g~(-1))和良好的倍率性能(在100、200、500、1 000和2 000 mA·g~(-1)的电流密度下,放电比容量为分别1 076.3、976.2、872.9、783.6和670.1 mAh·g~(-1))。材料优异的电化学性能归结为有机配体衍生的高含量非晶态碳的导电和缓冲作用有利于电子的快速传递并有效减缓了金属氧化物充放电过程中的体积膨胀。     

Synthesis of Fe2+ Substituted High-Performance LiMn1−xFexPO4/C (x = 0, 0.1, 0.2, 0.3, 0.4) Cathode Materials for Lithium-Ion Batteries via Sol-Gel Processes

A series of carbon-coated LiMn_1−xFe_xPO₄ (x = 0, 0.1, 0.2, 0.3, 0.4) materials are successfully constructed using glucose as carbon sources via sol-gel processes. The morphology of the synthesized material particles are more regular and particle sizes are more homogeneous. The carbon-coated LiMn_0.8Fe_0.2PO₄ material obtains the discharge specific capacity of 152.5 mAh·g⁻¹ at 0.1 C rate and its discharge specific capacity reaches 95.7 mAh·g⁻¹ at 5 C rate. Iron doping offers a viable way to improve the electronic conductivity and lattice defects of materials, as well as improving transmission kinetics, thereby improving the rate performance and cycle performance of materials, which is an effective method to promote the electrical properties.     

三维连续结构Li4Ti5O12/石墨烯纳米复合材料：制备和其锂离子电池超长循环性能

利用具有三维连续纳米孔结构的热剥离石墨烯为骨架制备Li4Ti5O12/石墨烯纳米复合材料。通过乙醇挥发法在热剥离石墨烯的纳米孔道内引入前驱物,进一步高温热处理,在热剥离石墨烯的孔道内原位形成Li4Ti5O12纳米粒子。利用复合材料作为锂离子电池电极材料。电化学反应过程中,热剥离石墨烯的三维连续结构确保了Li4Ti5O12纳米粒子与石墨烯在长循环过程中的有效接触。因此,复合材料表现出优异的循环稳定性。在5C下,5 000次循环后,其容量保持率高达94%。     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.     

Sn Anodes Protected by Intermetallic FeSn2 Layers for Long-lifespan Sodium-ion Batteries with High Initial Coulombic Efficiency of 93.8 %

With a theoretical capacity of 847 mAh g⁻¹, Sn has emerged as promising anode material for sodium-ion batteries (SIBs). However, enormous volume expansion and agglomeration of nano Sn lead to low Coulombic efficiency and poor cycling stability. Herein, an intermetallic FeSn₂ layer is designed via thermal reduction of polymer-Fe₂O₃ coated hollow SnO₂ spheres to construct a yolk-shell structured Sn/FeSn₂@C. The FeSn₂ layer can relieve internal stress, avoid the agglomeration of Sn to accelerate the Na⁺ transport, and enable fast electronic conduction, which endows quick electrochemical dynamics and long-term stability. As a result, the Sn/FeSn₂@C anode exhibits high initial Coulombic efficiency (ICE=93.8 %) and a high reversible capacity of 409 mAh g⁻¹ at 1 A g⁻¹ after 1500 cycles, corresponding to an 80 % capacity retention. In addition, NVP//Sn/FeSn₂@C sodium-ion full cell shows outstanding cycle stability (capacity retaining rate of 89.7 % after 200 cycles at 1 C).     

Mesoporous MnCo2O4 with a Flake‐Like Structure as Advanced Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A mesoporous flake‐like manganese‐cobalt composite oxide (MnCo₂O₄) is synthesized successfully through the hydrothermal method. The crystalline phase and morphology of the materials are characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller methods. The flake‐like MnCo₂O₄ is evaluated as the anode material for lithium‐ion batteries. Owing to its mesoporous nature, it exhibits a high reversible capacity of 1066 mA h g^?1, good rate capability, and superior cycling stability. As an electrode material for supercapacitors, the flake‐like MnCo₂O₄ also demonstrates a high supercapacitance of 1487 F g^?1 at a current density of 1 A g^?1, and an exceptional cycling performance over 2000 charge/discharge cycles.