Grafting of commercially available amines bearing aromatic rings onto poly(vinylidene‐co‐hexafluoropropene) copolymers

The grafting of poly(VDF‐co‐HFP) copolymers with different amines containing aromatic rings, such as aniline, benzylamine, and phenylpropylamine, is presented. ¹⁹F NMR characterization enabled us to show that the sites of grafting of aromatic‐containing amines were first difluoromethylene of vinylidene fluoride (VDF) in the hexafluoropropene (HFP)/VDF/HFP triad and then that of VDF adjacent to HFP. The kinetics of grafting of benzylamine, monitored by ¹H NMR spectroscopy, confirmed those sites of grafting and showed that all VDF units located between two HFPs were grafted in the first 150 min, whereas those adjacent to one HFP unit were grafted in the remaining 3000 min. Parameters such as the temperature or the molar percentage of HFP in the copolymer had an influence on the maximum rate of grafted benzylamine. The higher the temperature, the higher the molar percentage of grafted benzylamine. Furthermore, the higher the molar percentage of HFP in the copolymer, the higher the molar percentage of VDF in the HFP/VDF/HFP triad, and the higher the molar percentage of grafted benzylamine. The spacer length between the aromatic ring and the amino group had an influence on the kinetics of grafting: aniline (pK_a = 4.5) could not add onto the polymeric backbone, whereas phenylpropylamine was grafted in the first 150 min, and benzylamine required 3000 min to reach the maximum amount of grafting. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1855–1868, 2006     

Characterization and quantification of microstructures of a fluorinated terpolymer by both homonuclear and heteronuclear two‐dimensional NMR spectroscopy

Fluoropolymers are usually insoluble in organic solvents. Insolubility of fluoropolymers limits basic characterization such as microstructural investigations. In the family of fluoropolymers, terpolymer of tetrafluorethylene (TFE), hexafluoropropylene (HFP), and vinylidene fluoride (VDF), named THV is one of the newest members. There are nine grades of THV available. Among the nine grades, THV‐221 G is an ideal model polymer for basic characterization purposes. THV‐221 G is soluble in solvents such as acetone and ethyl acetate. In the current report, both homonuclear and heteronuclear 2D NMR experiments were employed in solution on THV‐221 G. The homonuclear gradient correlation spectroscopy NMR measurement revealed that THV has two adjacent TFE units in addition to TFE‐HFP sequence orders. The fraction of the microstructures is quantified by the analysis of 1D solution ¹⁹F NMR spectrum. Further, the gradient heteronuclear single quantum coherence experiment helped with the clarification of chemical environments of the units TFE, HFP, and VDF. The 1D solution ¹³C NMR spectrum was helpful in clarifying sequence assignments of VDF. It is concluded that THV is a random polymer with a limited fraction of TFE‐TFE and TFE‐HFP sequence orders in addition to head‐to‐tail polymerization of VDF unit. Copyright © 2014 John Wiley & Sons, Ltd.     

SEC with UV and ELSD detection for analysis of gamma-irradiated PS-radiation-grafted P(VDF/HFP) films

Summary Thin poly(vinylidene fluoride/hexafluoropropylene) (P(VDF/HFP)) films ahve been irradiated with gammarays to induce the initiation of styrene grafting by the indirect method. To obtain a better understanding of the radiation-grafting process we have used size exclusion chromatography (SEC) to study the effect of irradiation of this polymer and the evolution of the molecular weights of the polystyrene (PS) grafted chains as a function of the grafting time. Pristine, irradiated and PS radiation-grafted samples have been compared. We present evidence that the gamma irradiation induces both scission and crosslinking of the P(VDF/HFP) chains. We show that the average molecular weights of the PS grafted chains increase with grafting time and that the asymmetry of the chromatographic peak increases also. These grafted chains have molecular weights much higher than those of pristine P(VDF/HFP) and they cannot be confused with PS homopolymer chains, which have higher molecular weights as both, pristine and radiation-grafted P (VDF/HFP). Reversed-phase high-performance liquid chromatography (RPHPLC) has shown the absence of additives in pristine P(VDF/HFP) and has provided evidence of the presence of oligomers.     

Correlations between microstructure and crystallization of the fluorinated terpolymer of tetrafluoroethylene,hexafluoropropylene, and vinylidene fluoride

Random THV terpolymers consisting of tetrafluoroethylene (TFE), hexafluoropropylene (HFP), and vinylidene fluoride (VDF) are viable alternatives to polytetrafluoroethylene (PTFE) combining excellent chemical stability and thermoplastic processability. Although the properties of THV may be modified by crystallization, little is known on how crystallization is influenced by the chain microstructure of THV. We analyzed the chain microstructure of THV‐221G by solid‐state ¹⁹F NMR spectroscopy under fast magic angle spinning, revealing that THV‐221G contains 43.8 mol % TFE, 46.0 mol % VDF, and 10.2 mol % HFP. Sequence analysis revealed that the TFE units are preferentially located next to other TFE units. The HFP units, which are obstacles to crystallization because of their bulky CF₃ side groups, are preferentially located next to VDF units. WAXS measurements correspondingly revealed the presence of THV‐221G crystals with PTFE‐like packing and of further THV‐221G crystal populations with widened d‐spacings caused by the incorporation of certain amounts of HFP units into the THV‐221G crystals. Under confinement imposed by the cylindrical nanopores of self‐ordered alumina, the THV‐221G melting point decreased with decreasing pore diameter. Although direct impingement of the growing THV‐221G crystals on the pore walls is unlikely, the geometric confinement limits the access of growing THV‐221G crystals to crystallizable THV‐221G chain segments. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1402–1408     

Fluorinated block copolymers containing poly(vinylidene fluoride) or poly(vinylidene fluoride‐co‐hexafluoropropylene) blocks from perfluoropolyethers: Synthesis and thermal properties

PFPE‐b‐PVDF and PFPE‐b‐poly(VDF‐co‐HFP) block copolymers [where PFPE, PVDF, VDF, and HFP represent perfluoropolyether, poly(vinylidene fluoride), vinylidene fluoride (or 1,1‐difluoroethylene), and hexafluoropropylene] were synthesized by radical (co)telomerizations of VDF (or VDF and HFP) with an iodine‐terminated perfluoropolyether (PFPE‐I). Di‐tert‐butyl peroxide (DTBP) was used and was shown to act as an efficient thermal initiator. The numbers of VDF and VDF/HFP base units in the block copolymers were assessed with ¹⁹F NMR spectroscopy. According to the initial [PFPE‐I]₀/[fluoroalkenes]₀ and [DTBP]₀/[fluoroalkenes]₀ molar ratios, fluorinated block copolymers of various molecular weights (1500–30,300) were obtained. The states and thermal properties of these fluorocopolymers were investigated. The compounds containing PVDF blocks with more than 30 VDF units were crystalline, whereas all those containing poly(VDF‐co‐HFP) blocks exhibited amorphous states, whatever the numbers were of the fluorinated base units. All the samples showed negative glass‐transition temperatures higher than that of the starting PFPE. Interestingly, these PFPE‐b‐PVDF and PFPE‐b‐poly(VDF‐co‐HFP) block copolymers exhibited good thermostability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 160–171, 2003     

Synthesis of functional polymers—Vinylidene fluoride based fluorinated copolymers and terpolymers bearing bromoaromatic side‐group

The radical co‐ and terpolymerization of 4‐[(α,β,β‐trifluorovinyl)oxy]bromo benzene (TFVOBB) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF, or VF₂), hexafluoropropene (HFP), perfluoromethyl vinyl ether (PMVE), and chlorotrifluroroethylene (CTFE) is presented. Although TFVOBB could be thermocyclodimerized, it could not homopolymerize under radical initiation. TFVOBB could be copolymerized in solution under a radical initiator with VDF or CTFE comonomers, while its copolymerization with HFP or PMVE were unsuccessful. The terpolymerization of TFVOBB with VDF and HFP, or VDF and PMVE, or VDF and CTFE also led to original fluorinated terpolymers bearing bromoaromatic side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature of the radical initiators, and of the nature of solvents (fluorinated or nonhalogenated). Various monomer concentrations in the co‐ and terpolymers were assessed by ¹⁹F and ¹H‐NMR spectroscopy. The thermal and physico chemical properties were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5077–5097, 2004     

Synthesis of an original poly(vinylidene fluoride-co-hexafluoropropylene)-g-perfluoropolyether graft copolymer

The synthesis of one original poly(vinylidene fluoride-co-hexafluoropropylene)-g-perfluoropolyether graft copolymer, achieved from the radical terpolymerization of vinylidene fluoride (VDF), hexafluoropropylene (HFP) and a perfluoropolyether (PFPE) bearing an ω-allylic group, is presented. This functional PFPE was synthesized from the condensation of an ω-carboxylic PFPE with an allyl amine. The terpolymerization was initiated by t-butyl peroxide in a perfluorohexane/acetonitrile mixture. NMR spectroscopy enabled the VDF, HFP and allyl amido PFPE base units contained in the terpolymer to be assessed, showing the good incorporation of VDF and the poor reactivity of HFP.     

Fluorinated copolymers and terpolymers based on vinylidene fluoride and bearing sulfonic acid side‐group

The radical co‐ and terpolymerization of perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride (PFSVE) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF or VF₂), hexafluoropropene (HFP), chlorotrifluoroethylene (CTFE), and bromotrifluoroethylene (BrTFE) is presented. Although PFSVE could not homopolymerize under radical initiation, it could be copolymerized in solution under a radical initiator with VDF, while its copolymerizations with HFP or CTFE led to oligomers in low yields. The terpolymerizations of PFSVE with VDF and HFP, with VDF and CTFE, or with VDF and BrTFE also led to original fluorinated terpolymers bearing sulfonyl fluoride side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature and the amount of the radical initiators, of the nature of solvents (fluorinated or nonhalogenated), and of the initial amounts of fluorinated comonomers. The different mol % contents of comonomers in the co‐ and terpolymers were assessed by ¹⁹F NMR spectroscopy. A wide range of co‐ and terpolymers containing mol % of PFSVE functional monomer ranging from 10 to 70% was produced. The kinetics of copolymerization of VDF with PFSVE enabled to assess the reactivity ratios of both comonomers: r_VDF = 0.57 ± 0.15 and r_PFSVE = 0.07 ± 0.04 at 120 °C. The thermal and physicochemical properties were also studied. Moreover, the glass transition temperatures (T_gs) of poly(VDF‐co‐PFSVE) copolymers containing different amounts of VDF and PFSVE were determined and the theoretical T_g of poly(PFSVE) homopolymer was deduced. Then, the hydrolysis of the ? SO₂F into ? SO₃H function was investigated and enabled the synthesis of fluorinated copolymers bearing sulfonic acid functions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1814–1834, 2007     

Synthesis and characterization of fluorinated telomers containing vinylidene fluoride and hexafluoropropene from 1,6‐diiodoperfluorohexane

The synthesis of original fluorinated (co)telomers containing vinylidene fluoride (VDF) or VDF and hexafluoropropene (HFP) was achieved by radical telomerizations and (co)telomerizations of VDF (or VDF and HFP) in the presence of 1, 6‐diiodoperfluorohexane via a semisuspension process. tert‐Butyl peroxypivalate (TBPPi) was used as an efficient thermal initiator. The numbers of VDF and VDF/HFP base units in the (co)telomers were determined by ¹⁹F and ¹H NMR spectroscopy. They ranged from 10 to 190 VDF base units. Fluorinated telomers of various molecular weights (1200–12,600 g/mol) were obtained by the alteration of the initial [1,6‐diiodoperfluorohexane]₀/[fluoroalkenes]₀ and [TBPPi]₀/[fluoroalkenes]₀ molar ratios. The thermal properties of these fluorinated (co)telomers, such as the glass‐transition temperature and melting temperature, were examined. As expected, these telomers exhibited good thermal stability. They were stable at least up to 350 °C. The compounds containing more than 30 VDF units were crystalline, whereas all those containing VDF‐co‐HFP were amorphous with elastomeric properties, whatever the number was of the fluorinated base units. The structures of I–(VDF)_n–R_F–(VDF)_m–I and I–(HFP)_x(VDF)_n–R_F–(VDF)_m(HFP)_y–I (co)telomers were obtained, and the defects of the VDF chain and the ? CH₂CF₂I and ? CF₂CH₂I functionalities were studied successfully (where R_F = C₆F₁₂). The functionality in the iodine atoms was modified: the higher the VDF content in the telomers, the lower the normal end functionality (? CH₂CF₂I) and the higher the reversed extremity (? CF₂CH₂I). In addition, the percentage of defects increased when the number of VDF units increased. The molecular weights and molecular weight distributions of different telomers and cotelomers were also studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1470–1485, 2006     

偏氟乙烯/六氟丙烯乳液共聚反应动力学

对气相含氟单体偏氟乙烯(VDF)/六氟丙烯(HFP)的乳液共聚反应动力学机理进行了研究.结果表明:在80℃下,上述两种单体共聚反应速率r对乳化剂浓度(S)、引发剂浓度(I)和反应总压力(p)分别呈0.05级、0.31级和1.59级反应,由此推导得乳液共聚的反应速率表达式为:r一1.11×10-4S0.05I0.31P1.59,其中速率常数k=1.11×10-4g-0.37L0.37(MPa)-0.59min-1.由上述动力学方程计算得到的乳液共聚反应速率与实验结果一致.同时对两种单体的竞聚率做了初步讨论.     

Homogeneous phase polymerization of vinylidene fluoride in supercritical carbon dioxide

For the first time, stabilizer‐free vinylidene fluoride (VDF) homopolymerizations were carried out in homogenous phase with supercritical CO₂ using the conventional initiator di‐tert butyl peroxide (DTBP). In‐line FT‐NIR spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size‐exclusion chromatography and polymer endgroup analysis by ¹H‐NMR spectroscopy. The number average molecular weights were below 10⁴ g mol^?1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. For allowing isothermal reaction, high CO₂ contents ranging from 61 to 83 wt % were used. The high‐temperature and high‐pressure conditions required for homogeneous polymerization did not alter the amount of defects in VDF chaining. Scanning electron microscopy indicated that regular stack‐type particles are obtained upon expansion of the homogeneous polymerization mixture. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5626–5635, 2007     

Titrations using an apparatus for recording the antilogarithm of pH or pM

A titration apparatus plotting either the concentration of sample ion or the concentration of titrant ion has been tested. An antilog apparatus, converting measured e.m.f. values into concentrations is connected to ordinary titration equipment. The instrument has been tested by means of acid—base titrations (titrations of mixtures of weak acids and of a weak and a strong acid), precipitation titrations (determination of the chloride concentration in tap-water, titration of mixtures of halides), titrations with ion-selective electrodes (determination of the fluoride content of toothpaste) and complexometric titrations (determination of copper with EDTA, using mercuric ion as indicator ion and amalgamated silver rod as indicator electrode, or using a copper-selective indicator electrode). The method considerably simplifies the evaluation of the results as compared to conventional potentiometric titrations.     

Interphase/interface modification on the dielectric properties of polycarbonate/poly(vinylidene fluoride‐co‐hexafluoropropylene) multilayer films for high‐energy density capacitors

Unique three‐component multilayer films with ATBTATBTA configuration were fabricated using forced assembly multilayer coextrusion for novel dielectric systems. The dielectric breakdown strength, displacement–electric field hysteresis, and dielectric spectroscopy of 65‐layer polycarbonate (PC)/tie/poly(vinylidene fluoride‐co‐hexafluoropropylene) (P(VDF‐HFP)) were investigated with various tie materials. Three different tie materials, poly(methyl methacrylate) (PMMA), styrene‐co‐acrylonitrile copolymer with 30% acrylonitrile content (SAN30), and poly(ethylene terephthalate‐co‐1,4‐cycohexanedimethylene terephthalate) (PETG) were chosen owing to their various degrees of interaction with either P(VDF‐HFP) or PC. The 65‐layer PC/PMMA/P(VDF‐HFP) films exhibited a 25% enhancement in breakdown properties, 50% higher energy density, 40% smaller hysteresis loop areas, and orders of magnitude slower ion migration relative to the 33‐layer PC/P(VDF‐HFP) control. These property improvements are mainly attributed to the localized interactions at PMMA/P(VDF‐HFP) and PMMA/PC interfaces, forming interphase regions. The modified PMMA/P(VDF‐HFP) interphase region can effectively hinder the migration of impurity ions in P(VDF‐HFP), reducing their mobility within the layer. Additionally, a small fraction of PMMA can lead to slightly increased dielectric constant of the composite films owing to strong interaction between PMMA and P(VDF‐HFP). The other two systems with PETG and SAN30 as tie layers exhibited marginal improvements in dielectric properties owing to their weaker interactions with the P(VDF‐HFP) layers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 978–991     

Radical solution copolymerisation of vinylidene fluoride with hexafluoropropene

The radical copolymerisation in solution of vinylidene fluoride (or 1,1-difluoroethylene (VDF)) with hexafluoropropylene (HFP) initiated by di-tert-butyl peroxide is presented. A series of eight copolymerisation reactions was investigated with initial [VDF]_o/[HFP]_o molar ratios ranging from 5.0/95.0 to 85.2/14.8. Both co-monomers copolymerised in this range of copolymerisation. Moreover, only VDF homopolymerised in these conditions. The copolymer compositions of these random-type copolymers were calculated by means of ¹⁹F NMR spectroscopy which allowed the respective amount of each monomeric unit in the copolymer to be quantified. The Tidwell and Mortimer method led to the assessment of the reactivity ratios, r_i, of both co-monomers showing a higher incorporation of VDF in the copolymer (r_HFP = 0.12 ± 0.05 and r_VDF = 2.9 ± 0.6 at 393 K). Alfrey-Price's Q and e values of HFP were calculated to be 0.002 (from Q_VDF = 0.008) or 0.009 (from Q_VDF = 0.015) and +1.44 (versus e_VDF = 0.40) or +1.54 (versus e_VDF = 0.50), respectively, indicating that HFP is an electron-accepting monomer. The thermal properties of these fluorinated copolymers were also determined. Except for those containing a high amount of VDF, they were amorphous. Each showed one glass transition temperature (T_g) only, and from known laws of T_g, that of the homopolymer of HFP was assessed. It was compared with that obtained from the literature after extrapolation and is discussed.     

Design of Interpenetrated Networks of Mesostructured Hybrid Silica and Nonconductive Poly(vinylidene fluoride)–Cohexafluoropropylene (PVdF–HFP) Polymer for Proton Exchange Membrane Fuel Cell Applications

Organic–inorganic hybrid membranes of poly(vinylidene fluoride)–cohexafluoropropylene (PVdF–HFP) and mesostructured silica containing sulfonic acid groups were synthesized by using the sol‐gel process. These hybrid membranes were prepared by in situ co‐condensation of tetraethoxysilane and an organically modified silane (ormosil) by a self‐assembly route using organic surfactants as templates for tuning the architecture of the hybrid organosilica component. In this paper, we describe the elaboration and characterization of hybrid membranes all the way from the precursor solution to the evaluation of the fuel cell performances. These hybrid materials were extensively characterized by using NMR and IR spectroscopy, electron microscopy, or impedance spectroscopy so as to determinate their physicochemical and electrochemical properties. Even though the ion‐exchange capacity (IEC) was quite weak, the first fuel cell tests performed with these hybrid membranes show promising results relative to optimized Nafion 112 thanks to great water management of the silica inside the hydrophobic polymer.     

小波变换用于电位滴定法测定极弱酸

研究了用小波变换确定电位滴定终点方法测定硼酸和苯酚两种极弱酸,同经典方法及其它数学方法的结果进行比较,说明用小波变换电位滴定法测定极弱酸快速,准确,可为极弱酸的计算机联机测定提供一种新的途径。     

VO(OR)2Cl-Al(t-Bu)3催化丁二烯丙烯交替共聚机理的探讨

本文用电位滴定测定了钒的价态,与共聚合活性数据对照,认为活性中心主要是V⁺³离子;用IR测定了Al-O-V、Al→O和V-Cl后,提出活性中心为带Al-Cl-V、Al-O-V桥的钒中心正八面体结构。结合log[η]对1og(D₈₉₀/D₉₇₀)的线型关系推断交替共聚物的端基为β-甲基乙烯基,在此基础上提出了可能的引发、增长和终止机理。     

Polymethacrylate polymers with appended aluminum(III)-tetraphenylporphyrins: Synthesis, characterization and evaluation as macromolecular ionophores for electrochemical and optical fluoride sensors

The synthesis and characterization of a novel polymethacylate polymer with covalently linked Al(III)-tetraphenylporphyrin (Al(III)-TPP) groups is reported. The new polymer is examined as a potential macromolecular ionophore for the preparation of polymeric membrane-based potentiometric and optical fluoride selective sensors. To prepare the polymer, an Al(III) porphyrin monomer modified with a methacrylate functionality is synthesized, allowing insertion into a polymethacrylate block copolymer (methyl methacrylate and decyl methacrylate) backbone. The resulting polymer can then be incorporated, along with appropriate additives, into conventional plasticized poly(vinyl chloride) films for testing electrochemical and optical fluoride response properties. The covalent attachment of the Al(III)-TPP ionophore to the copolymer matrix provides potentiometric sensors that exhibit significant selectivity for fluoride ion with extended lifetimes (compared to ion-selective membrane electrodes formulated with conventional free Al(III)-TPP structure). However, quite surprisingly, the attachment of the ionophore to the polymer does not eliminate the interaction of Al(III)-TPP structures to form dimeric species within the membrane phase in the presence of fluoride ion. Such interactions are confirmed by UV/visible spectroscopy of the blended polymeric films. Use of the new polymer-Al(III)-TPP conjugates to prepare optical fluoride sensors by co-incorporating a lipophilic pH indicator (4′,5′-dibromofluorescein octadecyl ester; ETH7075) is also examined and the resulting optical sensing films are shown to exhibit excellent selectivity for fluoride, with the potential for prolonged operational lifetime.     

电位滴定法快速测定磷肥中的水溶性磷

建立了电位滴定法快速测定磷肥中水溶性磷含量的方法。用蒸饮水溶解磷肥中的水溶性磷,通过硝酸钡和阳离子交换树脂除去干扰离子,用六次甲基四胺-硝酸缓冲溶液制试液的酸度（pH=5.4),在乙醇体系中,用一定浓度的硝酸铅标准溶液进行电位滴定,用二阶微分法确定硝酸铅标准溶液的滴定终点体积。方法的RSD为0.66%-0.97%,回收率为100.00%-100.10%。     

On the E.S.R. spectra of intermediates generated during the electrochemical oxidation of triphenylacetic acid in acetonitrile

The acidity level and the fluoride ion activity are evaluated in anhydrous HF and in water+HF mixtures of HF content higher than 70% by means of R(H) and R(F) functions. For both functions, the potentials of the ferrocene/ferricinium or perylene⁺/perylene²⁺ systems are used as reference potentials. A hydrogen electrode is used for acidity level evaluation and it is shown that the R(H) function decreases (acidity increases) when HF content increases in the mixture; the value of R(H) is ?15.5 for anhydrous hydrogen fluoride (+KF 0.1 M). A lanthanum trifluoride monocrystal electrode is built and used for F^? activity evaluations and it is shown that the R(F) function increases (activity of fluoride ion decreases) when HF content increases, up to R(F)=13.6 for basic anhydrous HF (KF 0.1 M solution).