Effect of Functionalized Magnetite Nanoparticles and Diaminoxanthone on the Curing,Thermal Degradation Kinetic and Corrosion Property of Diglycidyl Ether of Bisphenol A-Based Epoxy Resin

To prepare a high-performance epoxy resin with excellent thermal, chemical and corrosion stability, diaminoxanthone（DAX） was used to cure diglycidylether of bisphenol-A（DGEBA）-based epoxy resin and blend of DGEBA with functionalized Fe3O4 nanoparticles. Kinetic parameters of curing and thermal degradation of epoxy resin systems were estimated by differential scanning calorimetry（DSC） and thermogravimetric analysis（TGA）, respectively. The 10% weight loss temperature has been increased from 340 °C to 366 °C and there was an increase in the char yield from 32.6% to 45.3% for the above systems. The corrosion performance of epoxy coated carbon steel was examined by potentiodynamic polarization, along with immersion test in 1.0 mol/L HCl solution. The results showed that epoxy resins cured with DAX had low tendency to corrosion. In addition, the cured epoxy resin containing 10% Fe3O4 had higher anticorrosion activity than bare DGEBA system. The results showed that functionalized Fe3O4 nanoparticles enhanced char formation and improved the thermal stability as well as anticorrosion activity of the resin.     

Preparation of cassava starch-based superabsorbent polymer using a twin-roll mixer as reactor

Cassava starch-based superabsorbent polymer was successfully synthesized using a new technology that based on modification of a Haake twin-roll mixer as reactor. The cassava starch was first gelatinized then modified by grafting under external shear stress in the reactor. The torque and temperature curves as a function of time can reflect the variations in the reactor and also offer some information about the copolymerization reaction. The advantages of this system include starch modification can be carried out(1) with high starch concentration,(2) under controlled time and(3) smaller amount of sample(60 g) required. The technology provides useful guides for reactive extrusion. The starch grafted composites were characterized by Fourier transform infrared spectroscopy(FTIR), nuclear magnetic resonance(NMR) and thermal gravimetric analysis(TGA). The TGA was also used for determining the percentage of grafting ratio. The results show that the cassava starch has been successfully grafted with acrylamide then crosslinked by N,N′-methylene-bisacrylamide using this reactor. The ultimate water absorbent capacity of the cassava-based superabsorbent polymer impacted by various pH values illustrated that the acid and basic solutions inhibit the ability of imbibing water. Additionally, gel properties of the cassava-based superabsorbent polymer were investigated. It can be concluded that the structure of cassava gel is stable, while the three dimensional network of cassava-based superabsorbent polymer is rigid but its structure could not resist external force effectively and everlastingly since G′ was decreased with increasing amplitude.     

Effect of Ni,Fe and Fe-Ni alloy catalysts on the synthesis of metal contained carbon nano-onions and studies of their electrochemical hydrogen storage properties

Three types of carbon nano-onions(CNOs) including Ni@CNOs.Fe_3C@CNOs and Fe_(0.64)Ni_(0.36)@CNOs nanoparticles have been synthesized by catalytic decomposition of methane at 850 ℃ using nickel,iron and iron-nickel alloy catalysts.Comparative and systematic studies have been carried out on the morphology,structural characteristics and graphitic crystallinity of these CNOs products.Furthermore,the electrochemical hydrogen storage properties of three types of CNOs have been investigated.Measurements show that the Ni@CNOs have the highest discharge capacity of 387.2 mAh/g,coiTesponding to a hydrogen storage of 1.42%.This comparison study shows the advantages of each catalyst in the growth of CNOs.enabling the controllable synthesis and tuning the properties of CNOs by mediating different metals and their alloy for using in the fuel cell system.     

Preferential oxidation of CO in excess H2 over the CeO2/CuO catalyst： Effect of initial support

Three series of CeO2/CuO samples were prepared by impregnation method and characterized by XRD, N2adsorption-desorption, temperatureprogrammed reduction(TPR), XPS and TEM techniques. In comparison with the samples prepared with CuO as initial support, the samples with Cu(OH)2as initial support have higher reducibilities and smaller relative TPR peak areas, and also larger specific surface areas at calcination temperatures of 400℃–600℃. As a result, Cu(OH)2is better than CuO as initial support for preferential oxidation of CO in excess H2(CO-PROX). The best catalytic performance was achieved on the sample calcined at 600℃ and with an atomic ratio of Ce/Cu at 40%. XPS analyses indicate that more interface linkages Ce-O-Cu could be formed when it was calcined at 600℃. And the atomic ratio of Ce/Cu at 40%led to a proper reducibility for the sample as illustrated by the TPR measurements.     

Design,Synthesis and Antitumor Activity of Pyrrolopyrazinone-chalcone Hybrids

A series of pyrrolopyrazinone-chalcone hybrids（12a-12q） was designed,synthesized and screened for their antitumor activity against SKOV-3,A549 and HeLa cell lines in vitro.Compared with the pyrrolopyrazinone（10a） and 5-fluorouracil（5-FU）,nearly all the tested compounds showed significantly-improved antitumor activities.The most promising compounds 12e and 12k（IC50=0.25 and 0.88 μmol/L） respectively show activities of 123and 35 times that of compound 10a（IC50=30.74 μmol/L） against HeLa cell line.The result reveals that the presence of chalcone moiety is beneficial to their activity and selectivity.     

Influence of Reverse Pressure on the Shear Viscosity of Hydrophilic Poly（ethylene terephthalate） Melt

The effect of reverse pressure.on rheological behavior has been studied. The apparatus is a capillary rheometer with counter pressure chamber being held at a high reverse pressure by means of a cock. The results show that with the increase in temperature, the shear viscosity of hydrophilic PET is reduced. It is different that the effect of temperature on shear viscosity is varied under the condition of all shear rates or all pressures, and the effect is more prominent at 50 MPa or at 216 s-1. At the same time, the pressure coefficients decrease with increasing the shear rate and the temperature and tend to reach a constant value nearly at the temperature of 290 °C.     

Selective oxidation of ethane to aldehydes over SBA-15 supported molybdenum catalyst

SBA-15 supported Mo catalysts （Moy/SBA-15） were prepared by an ultrasonic assisted incipient-wetness impregnation method. The physical and chemical properties of the catalysts were characterized by means of N2-adsorption-desorption, XRD, TEM, UV-Vis, Raman, XANES and H2-TPR. The results showed that a trace amount of MoO3 was produced on high Mo content samples. Tum-over frequency （TOF） and product selectivity are dependent on the molybdenum content. Both Mo0.75/SBA-15 and Mo1.75/SBA-15 catalysts give the higher catalytic activity and the selectivity to the total aldehydes for the selective oxidation of C2H6. At the reaction temperature of 625℃, the maximum yield of aldehydes reached 4.2% over Mo0.75/SBA-15 catalyst. The improvement of the activity and selectivity was related with the state of MoOx species.     

Effect of ZSM-5 zeolite morphology on the catalytic performance of the alkylation of toluene with methanol

A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaCl and crystal seed. X-ray diffraction(XRD),scanning electron microscope(SEM), X-ray fluorescence(XRF) and temperature-programmed desorption of ammonia(NH3-TPD) were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified sample showed the best stability among the tested three modified samples.     

A Novel Sr2CuInO3S p-type semiconductor photocatalyst for hydrogen production under visible light irradiation

A novel Sr2CuInO3 S oxysulfide p-type semiconductor photocatalyst has been prepared by solid state reaction method and it exhibits intriguing visible light absorption properties with a bandgap of 2.3 eV. The p-type semiconductor character of the synthesized Sr2CuInO3 S was confirmed by Hall efficient measurement and Mott-Schottky plot analysis. First-principles density functional theory calculations(DFT) and electrochemical measurements were performed to elucidate the electronic structure and the energy band locations. It was found that the as-synthesized Sr2CuInO3 S photocatalyst has appreciate conduction and valence band positions for hydrogen and oxygen evolution, respectively. Photocatalytic hydrogen production experiments under a visible light irradiation(λ420 nm) were carried out by loading different metal and metal-like cocatalysts on Sr2CuInO3 S and Rh was found to be the best one among the tested ones.     

Preparation of activated carbon with high surface area for high-capacity methane storage

Activated carbon （AC） was fabricated from corncob, which is cheap and abundant. Experimental parameters such as particle size of corncob, KOHlchar weight ratio, and activation temperature and time were optimized to generate AC, which shows high methane sorption capacity. AC has high specific surface area （3227 m^2/g）, with pore volume and pore size distribution equal to 1.829 cm^3/g and ca. 1.7-2.2 nm, respectively. Under the condition of 2℃ and less than 7.8 MPa, methane sorption in the presence of water （Rw = 1.4） was as high as 43.7 wt% methane per unit mass of dry AC. The result is significantly higher than those of coconut-derived AC （32 wt%） and ordered mesoporous carbon （41.2 wt%, Rw = 4.07） under the same condition. The physical properties and amorphous chaotic structure of AC were characterized by N2 adsorption isotherms, XRD, SEM and HRTEM. Hence, the corncob-derived AC can be considered as a competitive methane-storage material for vehicles, which are run by natural gas.

Key words     

Microstructure evolution and oxidation states of Co in perovskite-type oxide Ba_(1.0)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3-δ) annealed in CO_2 atmosphere

Ba1.0Co0.7Fe0.2Nb0.1O3-γ（BCFN） oxide with perovskite cubic structure was synthesized by solid state reaction method. COa corrosion of BCFN membrane was investigated by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, diffuse reflectance infrared Fourier- transformed spectroscopy （DRIFT） and X-ray absorption fine structure spectroscopy （XAFS）. Cobalt （Co） K-edge absorption spectra of BCFN annealed in COa reveal that the oxidation states of Co in all the samples were larger than ＋3 and they decreased with the increase of calcination time. At 800 ℃, 1% CO2 introduced into He could speed up the reduction of Co cations in comparison with pure He. In addition, sulfate ions in the bulk of BCFN membrane preferred to migrate to the surface under CO2 calcination and form monoclinic Ba（CO3）0.9（SO4）0.1 besides orthorhombic witherite. Moreover, SEM results indicate that the nucleation and growth of carbonates grains started at the grain boundary of the membrane.     

TiO2 nanocrystals/graphene hybrids with enhanced Li-ion storage performance

TiO_2 nanocrystals/graphene hybrids(TiO_2-G) with ultrafine TiO_2 nanocrystals(~7 nm in size) conformally coated on ultrathin graphene nanosheets(~ 2 layers thick) were successfully prepared via a facile one-pot solvothermal route under mediated conditions.With the feature of large surface area,abundant mesopores and high thermal stability,the TiOi-G nanohybrids exhibited large reversible Li-ion storage capacity with excellent cycling stability(629 mAh·g~(-1) after 400 cycles at a current of 60 mA·g~(-1)) and good rate capability(184 mAh·g~(-1) at a current density of 3 A·g~(-1)) due to the synergetic effects and strong interactions between the components,showing great promise in applications for advanced energy storage devices.     

Unique catalysis of Ni-Al hydrotalcite derived catalyst in CO_2 methanation: cooperative effect between Ni nanoparticles and a basic support

Ni-Al hydrotalcite derived catalyst （Ni-Al2O3-HT） exhibited a narrow Ni particle-size distribution with an average particle size of 4.0 nm. Methanation of CO2 over this catalyst initiated at 225℃ and reached 82.5% CO2 conversion with 99.5% CH4 selectivity at 350℃, which was much better than its impregnated counterpart. Characterizations by means of CO2 microcalorimetry and 27 Al NMR indicated that large amount of strong basic sites existed on Ni-Al2O3-HT, originated from the formation of Ni-O-Al structure. The existence of strong basic sites facilitated the activation of CO2 and consequently promoted the activity. The combination of highly dispersed Ni with strong basic support led to its unique and high efficiency for this reaction.

Keywords     

Excellent complete conversion activity for methane and CO of Pd/TiOz-Zro.sA10.5O1.75 catalyst used in lean-bum natural gas vehicles

Palladium catalysts are supported on TiO2, ZrO2, A12O3, Zro.sAlo.501.75 and TiO2-Zro.sAlo.501.75 prepared by co-precipitation method, re- spectively. Catalytic activities for methane and CO oxidation are evaluated in a gas mixture that simulated the exhaust from lean-burn natural gas vehicles （NGVs）. Pd/TiO2-Zro.sAlo.501.75 performs the best catalytic activity among the tested five catalysts. For CH4, the light-off temperature （Tso） is 254 ℃, and the complete conversion temperature （Tgo） is 280 ℃; for CO, Tso is 84 ℃, and Tgo was 96 ℃. Various techniques, including N2 adsorption-desorption, X-ray diffraction （XRD）, H2-temperature-programmed reduction （H2-TPR）, X-ray photoelec- tron spectroscopy （XPS）, and scanning electron microscopy （SEM） are employed to characterize the effect of supports on the physicochemical properties of prepared catalysts. N2 adsorption-desorption and SEM show that TiO2-Zro.5Al0.501.75 expresses uniform nano-particles and large meso-pore diameters of 26 nm. H2-TPR and XRD indicate that PdO is well dispersed on the supports and strongly interacted with each other. The results of XPS show that the electron density around PdO and the proportion of active oxygen on TiO2-Zro.sAl0.501.75 are maxima among the five supports.     

Performance of Co/MgO catalyst for C02 reforming of toluene as a model compound of tar derived from biomass gasification

Catalytic performances of the CO2 reforming of toluene on Co/MgO catalysts with different cobalt loadings were evaluated in a fluidized-bed reactor. The results showed that the conversion of toluene and the stability of Co/MgO increased, but the apparent reaction rate decreased at the initial stage with increasing the amount of metallic Co formed from the reduction of Co/MgO catalysts at 700 ~C. The deactivation of Co/MgO catalysts was mainly resulted from that a part of the metallic Co was oxidized by CO2 and could not be re-reduced by H2 at reaction temperature. Therefore, the excess metallic Co on the higher Co loading catalysts was beneficial to the catalyst stability.     

Synthesis,characterization, thermal stability and antibacterial activity of coumarin based methacrylate copolymers

Monomer of 7-methacryloyloxy-4-methylcoumarin(MAOMC) was synthesized and characterized by FTIR, 1H-NMR and 13C-NMR spectroscopy. Copolymers of MAOMC with butoxyethylmethacrylate(BOEMA) at different feed compositions were prepared by free radical solution polymerization at(70 ± 1) °C in ethylmethylketone(EMK) using benzyl peroxide(BPO) as an initiator. The copolymers were characterized by FTIR and 1H-NMR spectroscopy. Thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC) of the copolymers showed moderate thermal stability and higher Tg values. Gel permeation chromatography(GPC) was used to find out the molecular weights of the different copolymers. Antibacterial activities of the copolymers were also investigated against the selected pathogenic bacteria's. The antibacterial activity of the copolymer increases as the MAOMC content increases in the copolymer. This shows that coumarin moiety plays a very important role in the antibacterial activity.     

Resorcinarene-centered Amphiphilic Star-block Copolymers: Synthesis,Micellization and Controlled Drug Release

Eight-arm star-shaped poly（■-caprolactone）-block-poly（ethylene glycol）s（SPCL-b-PEG） have been prepared by a combination of controlled ring-opening polymerization（CROP） and coupling reaction. First, eight-arm star-shaped poly（■-caprolactone）s（SPCL） with a resorcinarene core were synthesized using octamethyl tetraundecylresorcinarene octaacetate as octa-initiator and yttrium tris（2,6-di-tert-butyl-4-methylphenolate） [Y（DBMP）3] as catalyst. Then the coupling reaction was carried out between SPCLs and carboxyl-terminated methoxy poly（ethylene glycol）s（mP EG-COOH） in the presence of N,N′-dicyclohexylcarbodiimide（DCC） and 4-dimethylaminopyridine（DMAP）, resulting in eight-arm star-shaped SPCL-b-PEGs with controlled molecular weight and well-defined architecture. Furthermore, these amphiphilic eight-arm SPCL-b-PEGs could self-assemble into micelles with low critical micellar concentrations（CMC）, which was characterized by fluorescent spectroscopy. Moreover, indomethacin loaded micelles with high drug loading content and high encapsulation efficiency can be prepared, which is probably due to the highly branched architecture. The morphologies of micelles were characterized by transmission electron microscopy（TEM）, which exhibited diverse nanostructures as the drug loading contents varied. In vitro drug release of indomethacin from SPCL-b-PEG micelles was carried out in PBS, from which a sustained release behavior was observed. SPCL-b-PEG micelles did not show significant cytotoxicity at copolymer concentrations up to 1000 mg/L, making them very promising for drug delivery.     

Improved electrochemical hydrogen storage properties of Mg-Y thin films as a function of substrate temperature

Pd-capped Mg_(78)Y_(22) thin films have been prepared by direct current magnetron co-sputtering system at different substrate temperatures and their electrochemical hydrogen storage properties have been investigated.It is found that rising substrate temperature to 60 ℃ can coarsen the surface of thin film,thus facilitating the diffusion of hydrogen atoms and then enhancing its discharge capacity to ~1725 mAh·g~(-1).Simultaneously,the cyclic stability is effectively improved due to the increased adhesion force between film and substrate as a function of temperature.In addition,the specimen exhibits a very long and flat discharge plateau at about —0.67 V,at which nearly 60%of capacity is maintained.The property is favorable for the application in metal hydride/nickel secondary batteries.The results indicate that rising optimal substrate temperature has a beneficial effect on the electrochemical hydrogen storage of Mg-Y thin films.     

Co（Ⅱ）-salen complex encapsulated into MIL-100（Cr） for electrocatalytic reduction of oxygen

Co(II)-salen was encapsulated in MIL-100(Cr) metal organic framework by "ship in a bottle" to synthesize a new electrocatalyst, Cosalen@MIL-100(Cr). The material was characterized by XRD, FT-IR, UV-Vis and N2-adsorption. The Cosalen@MIL-100(Cr) modified glassy carbon electrode exhibits a well-defined reduction peak at the potential of –0.21 V toward the oxygen reduction reaction(ORR) by cyclic voltammetry(CV) in pH = 6.84 phosphate buffer. Almost 400 mV positive shift of potential at Cosalen@MIL-100(Cr) modified electrode for ORR compared with that at bare glassy carbon, indicates that Cosalen@MIL-100(Cr) possesses excellent electrocatalytic activity. The transferred number of electrons for ORR was determined by chronocoulometry. The result suggests that the introduction of Co(II)-salen complex into MOF increases the electrocatalytic activity via a four-electron reduction pathway. Furthermore, this electrocatalyst exhibits good stability and reproducibility.     

Graphene Oxide Doped Poly（hydroxymethylated-3,4- ethylenedioxythiophene）： Enhanced Sensitivity for Electrochemical Determination of Rutin and Ascorbic Acid

A novel graphene oxide doped poly(hydroxymethylated-3,4-ethylenedioxythiophene)(PEDOT-MeOH/GO) composite film was synthesized and utilized as an efficient electrode material for simultaneous detection of rutin and ascorbic acid(AA). PEDOT-MeOH/GO films were synthesized on glassy carbon electrode(GCE) by a facile one-step electrochemical approach and were characterized by scanning electron microscopy, UV-Vis spectroscopy, FTIR spectra and electrochemical methods. Then the PEDOT-MeOH/GO/GCE was applied successfully in the simultaneous detection of rutin and AA. The results showed that the oxidation peak currents of rutin and AA obtained at the PEDOT-MeOH/GO/GCE were much higher than those at the traditional conducting polymer PEDOT/GO/GCE, PEDOT-MeOH/GCE, PEDOT/GCE and bare GCE. Under optimized conditions, the linear ranges for rutin and AA are 20 nmol/L-10 μmol/L and 8 μmol/L-1 mmol/L, respectively. The detection limit is 6 nmol/L for rutin and 2 μmol/L for AA(S/N = 3), which are lower than those of the reported electrochemical sensors.