Diacetylene–siloxane–carborane thermosets and ceramic precursors

Thermosets and ceramic chars were prepared and characterized from a diacetylene–siloxane–carborane polymer, DSCS, and a diacetylene–siloxane polymer, DS. The goal was to incorporate the known thermo‐oxidative stability found in the siloxane–carborane elastomers into high‐performance thermosets and ceramic chars. The DSCS thermoset had excellent thermo‐oxidative stability as determined by a low weight loss and tough residue after annealing for 100 h in air at 300 °C, but it had a low glass transition temperature (94 °C). The DS thermoset did not undergo a glass transition below 350 °C and had a low weight loss on thermo‐oxidative aging, but the residue was quite brittle. Two random copolymers were made to optimize the thermo‐oxidative stability and toughness of the DSCS thermoset and the higher glass transition of the DS thermoset. Significantly, the 50:50 DSCS/DS random copolymer when cured to a thermoset did not undergo a glass transition below 350 °C, yet retained much of the strength, toughness and thermo‐oxidative stability of the DSCS thermoset. Heat treatment of the poly‐DSCS to elevated temperatures resulted in a ceramic material with improved properties relative to the ceramic derived from poly‐DS. Both polymers had similar char yields to 800 °C, but the poly‐DSCS solidified to a 15% denser ceramic. Copyright © 2000 John Wiley & Sons, Ltd.     

Spatial,Hysteretic, and Adaptive Host–Guest Chemistry in a Metal–Organic Framework with Open Watson–Crick Sites

Biological and artificial molecules and assemblies capable of supramolecular recognition, especially those with nucleobase pairing, usually rely on autonomous or collective binding to function. Advanced site‐specific recognition takes advantage of cooperative spatial effects, as in local folding in protein–DNA binding. Herein, we report a new nucleobase‐tagged metal–organic framework (MOF), namely ZnBTCA (BTC=benzene‐1,3,5‐tricarboxyl, A=adenine), in which the exposed Watson–Crick faces of adenine residues are immobilized periodically on the interior crystalline surface. Systematic control experiments demonstrated the cooperation of the open Watson–Crick sites and spatial effects within the nanopores, and thermodynamic and kinetic studies revealed a hysteretic host–guest interaction attributed to mild chemisorption. We further exploited this behavior for adenine–thymine binding within the constrained pores, and a globally adaptive response of the MOF host was observed.     

Radiation effects on styrene–butadiene–ethylene–propylene diene monomer‐multiple walled carbon nanotube nanocomposites: vulcanization and characterization

Varying compositions of styrene–butadiene rubber (SBR) and ethylene–propylene diene monomer (EPDM) 50:50 blend containing multiple walled carbon nanotube (MWNT) as nanoparticulate filler (0.5–5%) were prepared and their efficacy for radiation vulcanization was analyzed by gel‐content, Charlesby‐Pinner parameter, and crosslinking density measurements. Radiation sensitivity of the nanocomposites increased with increase in the MWNT fraction and radiation dose in the dose range studied. The elastic modulus, tensile strength increased with the radiation dose, while elongation at break exhibited downward trend. The extent of reinforcement as assessed using Kraus equation suggested high reinforcement of blend on MWNT addition. The reinforcing mechanism of nanocomposites was studied by various micromechanics models which predicted higher modulus than the experimentally observed results, indicating agglomeration in the nanocomposites. The thermal stability of the composites increased with increase in MWNT loading has been attributed to the antioxidancy induced by nanotubes and higher crosslinking extent of the nanocomposites. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of MCM‐41‐Biurea‐Pd as a heterogeneous nanocatalyst and using its catalytic efficacy in C–C,C–N and C–O coupling reactions

MCM‐41‐Biurea‐Pd is introduced as a new, heterogeneous and reusable catalyst for C–C and C–heteroatom bond formation between various aryl halides, phenols and amines, in the presence of Ph₃SnCl (Stille reaction) in PEG‐400 as a green solvent at room temperature. The structure of the functionalized MCM‐41 was analysed using various techniques.     

111In–L–LDL and 153Gd–L–LDL as radiotracers for detection of AR4‐2J rat pancreatic tumors

Pancreatic cancer has an extremely poor prognosis, due, in part, to lack of methods for early diagnosis. The present study was designed to evaluate the potential of labeling low‐density lipoprotein (LDL) with a radionuclide using a lipid chelating agent, bis(stearylamide) of diethylenetriaminepentaacetic acid (L), to detect pancreatic tumors by gamma‐scintigraphy. Previous studies indicated that the difficulty of visualization of pancreatic tumors was due to their poor vascularization. This study compares the ability of two radiotracers, ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL to target highly vascularized rat pancreatic tumors (AR4‐2J) implanted in nude mice. Biodistribution studies showed that the tumor uptake of ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL tracers was twofold and fivefold higher respectively than with the controls (¹¹¹In citrate and ¹⁵³Gd citrate respectively). These tracers would thus be suitable for scintigraphic imaging. We show here that LDL could be employed as a delivery system for tracers such as ¹¹¹In or ¹⁵³Gd when these two radionuclides are complexed by a lipid‐chelating anchor, and that ¹¹¹In–L–LDL and ¹⁵³Gd–L–LDL enabled better visualization of the pancreatic tumor tissues, with a better result with ¹⁵³Gd–L–LDL. Copyright © 2004 John Wiley & Sons, Ltd.     

Reversible Thermally Responsive and Luminescent Coil–Rod–Coil Triblock Copolymers

A functional coil–rod–coil triblock copolymer containing a terfluorene unit as the rigid segment and poly(N‐isopropylacrylamide) (PNIPAAm) as the flexible block was successfully synthesized via reversible addition–fragmentation chain‐transfer (RAFT) polymerization using terfluorene‐based dithioester as the RAFT agent. The temperature‐responsive optical properties were investigated with the aid of dynamic light scattering and fluorescence techniques. Additionally, the relationship between the optical properties and the reversible phase transition of the doping system formed by blending the copolymer with tetraphenylporphine tetrasulfonic acid was studied. Above the lower critical solution temperature, the energy transfer efficiency decreased as a result of the globule–to–coil transition from PNIPAAm segments. The result indicates that these copolymers have a potential to be used as responsive fluorescent probes in facile detection of dye‐labeled biopolymers.

     

Polyaniline‐anchored palladium catalyst‐mediated Mizoroki–Heck and Suzuki–Miyaura reactions and one‐pot Wittig–Heck and Wittig–Suzuki reactions

A polyaniline‐anchored palladium catalyst was prepared and screened for coupling reactions of aryl halides. The robust and recyclable catalyst was effective in Mizoroki–Heck and Suzuki–Miyaura reactions of aryl bromides and aryl iodides. The catalyst system was further employed for one‐pot Wittig–Heck and Wittig–Suzuki combinations to build conjugated compounds in good conversions. Copyright © 2014 John Wiley & Sons, Ltd.     

Pressure–volume–temperature of molten and glassy polymers

The pressure–volume–temperature (PVT) dependencies of several amorphous polymers (PS, PC, PPE, and PPE/PS 1:1 blend) in the glassy and molten state were studied. The Simha–Somcynsky (S–S) lattice‐hole equation of state (EOS) was used. Fitting the PVT data in the molten state to the EOS yielded the free volume quantity, h = h(T, P), and the characteristic reducing parameters, P*, V*, and T*. The data within the glassy region were interpreted assuming that the latter parameters are valid in the molten and vitreous state, than calculating h = h(T, P) from the experimental values of V = V(T, P). Next, the frozen free volume fraction in the glass was computed as FF = FF(P). The FF values of polystyrene (PS) resins at ambient pressure showed little scattering (FF_P=1 = 0.691 ± 0.008), while their P‐dependencies varied, reflecting the thermodynamic history of the glass formation as well as the PVT measurements protocol. The pressure gradient of T_g was compared with the Ehrenfest relation for the second‐order transition; here also agreement depended on the method of vitrification. The experimental values of FF at ambient pressure decreased with increasing values of the characteristic temperature reducing parameter, T*. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 270–285, 2007.     

Aluminum/Nitrogen Cycles and an Open Cage with Al–H and N–H Functions

The cyclic tert‐butyl‐amino alane dimer [tBu–N(H)AlH₂]₂ ( 1 ) was obtained from reaction between alane with tert‐butylamine and its boranate derivative [tBu–N(H)–Al(BH₄)₂)]₂ ( 2 ) subsequently from 1 by hydride/chloride exchange using PbCl₂ followed by reaction with LiBH₄. Both compounds form four‐membered Al₂N₂ cycles with typical Al–N bond lengths of 1.940(5) Å ( 1 ) and 1.945(5) Å ( 2 ) as found from X‐ray diffraction analysis. The tert‐butyl substituents at the nitrogen atoms may be situated at the same side of the ring (cis) or at opposite sides (trans). For compound 1 both isomers are present in solution, showing particular temperature dependent NMR shifts. In the solid both compounds 1 and 2 adopt the trans arrangement. When 1 is reacted with PbCl₂ in half of the molarity ratio used for 2 , surprisingly the novel compound 3 , a zwitterion, can be obtained: [(tBu–N)(Al–H)₃(tBu–N(H))₃Cl((H)N–tBu)₃(Al–H)₂(Al–Cl)(N–tBu)]⁺[(tBu–N)(tBu–N(H))(AlCl₂)₂]^–. X‐ray structure analysis reveals that the anion is made of a tert‐butyl amino aluminum dichloride dimer (central Al₂N₂ ring) with one of the two nitrogen atoms being deprotonated. The cationic counterpart consists of three entities: (i) There is a first seco‐norcubane like Al₃N₄ basket with tert‐butyl groups at the nitrogen atoms, two hydride and one chloride ligand at the aluminum atoms and three hydrogen atoms on the open side of the basket, all pointing in the same direction; (ii) There is a second similar Al₃N₄ basket with the same substituent pattern except that all aluminum atoms have exclusively hydrogen ligands; (iii) Both baskets coordinate a central chloride through the six protons at the open nitrogen face of the baskets in such a way that the chloride lies in the center of a H₆ trigonal anti‐prism [mean H–Cl–H = 56.1(9)°]. As each of the open cages has a positive charge the overall charge by combination with the chloride adds to +1. The structure of the cationic part of 3 is unprecedented in AlN polycycles.     

Cocrystals of 6‐methyl‐2‐thiouracil: presence of the acceptor–donor–acceptor/donor–acceptor–donor synthon

The results of seven cocrystallization experiments of the antithyroid drug 6‐methyl‐2‐thiouracil (MTU), C₅H₆N₂OS, with 2,4‐diaminopyrimidine, 2,4,6‐triaminopyrimidine and 6‐amino‐3H‐isocytosine (viz. 2,6‐diamino‐3H‐pyrimidin‐4‐one) are reported. MTU features an ADA (A = acceptor and D = donor) hydrogen‐bonding site, while the three coformers show complementary DAD hydrogen‐bonding sites and therefore should be capable of forming an ADA/DAD N—H...O/N—H...N/N—H...S synthon with MTU. The experiments yielded one cocrystal and six cocrystal solvates, namely 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–1‐methylpyrrolidin‐2‐one (1/1/2), C₅H₆N₂OS·C₄H₆N₄·2C₅H₉NO, (I), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine (1/1), C₅H₆N₂OS·C₄H₆N₄, (II), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylacetamide (2/1/2), 2C₅H₆N₂OS·C₄H₆N₄·2C₄H₉NO, (III), 6‐methyl‐2‐thiouracil–2,4‐diaminopyrimidine–N,N‐dimethylformamide (2/1/2), C₅H₆N₂OS·0.5C₄H₆N₄·C₃H₇NO, (IV), 2,4,6‐triaminopyrimidinium 6‐methyl‐2‐thiouracilate–6‐methyl‐2‐thiouracil–N,N‐dimethylformamide (1/1/2), C₄H₈N₅⁺·C₅H₅N₂OS⁻·C₅H₆N₂OS·2C₃H₇NO, (V), 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–N,N‐dimethylformamide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₃H₇NO, (VI), and 6‐methyl‐2‐thiouracil–6‐amino‐3H‐isocytosine–dimethyl sulfoxide (1/1/1), C₅H₆N₂OS·C₄H₆N₄O·C₂H₆OS, (VII). Whereas in cocrystal (I) an R₂²(8) interaction similar to the Watson–Crick adenine/uracil base pair is formed and a two‐dimensional hydrogen‐bonding network is observed, the cocrystals (II)–(VII) contain the triply hydrogen‐bonded ADA/DAD N—H...O/N—H...N/N—H...S synthon and show a one‐dimensional hydrogen‐bonding network. Although 2,4‐diaminopyrimidine possesses only one DAD hydrogen‐bonding site, it is, due to orientational disorder, triply connected to two MTU molecules in (III) and (IV).     

Adsorption of glycidoxypropyl‐trimethoxy‐silane on α and β phases of titanium alloy Ti–6.5Al–1Mo–1V–2Zr

The adsorption of glycidoxypropyl‐trimethoxy‐silane (GTMS) on α and β phases of titanium alloy Ti–6.5Al–1Mo–1V–2Zr was studied. The morphology and composition of coated alloy were investigated by using field‐emission scanning electron microscopy, energy dispersive spectroscopy, and atomic force microscopy. The quantitative characterization of GTMS adsorption was carried out by using XPS. The results showed that the β phase particles exhibited better ability to adsorb GTMS molecules than the α phase, especially at lower concentrations of GTMS, which resulted in a relatively nonuniform silane coating. The differences in the adsorption ability between the α phase and β phase particles were attributed to the different alloying elements contained in them and different characteristics of the oxides formed on them. Uniform adsorption of GTMS on the overall metal surface was achieved by increasing the concentration of GTMS to 1 vol.%. Copyright © 2012 John Wiley & Sons, Ltd.