Indirect polarographic determination of tripolyphosphate ions in the presence of other polyphosphates, with octyltin chloride

Tripolyphosphate ions form a soluble complex with mono-octyltin cations, thus reducing the polarographic wave height ofthe octyltin. This provides a method for the determination of 2 x 10(-4)-4 x 10(-3)M tripolyphosphate in the presence of 2 x 10(-3)M ortho-, pyro-, trimeta-, and 10(-3)M tetrametaphosphate, together, or in any combination. The method is also insensitive to less than 2 x 10(-3)M magnesium or calcium and less than 10(-2)M sulphate.     

The uranium-Xylidyl Blue I complex and its application in linear sweep polarography

The linear sweep polarographic wave of the uranium-Xylidyl Blue I complex in ethylenediamine-1,10-phenanthroline-hydrochloric acid medium has been studied. The complex, corresponding to UO(2)(XBI)(2-)(2) with log beta' = 9.09 (by polarography), 8.81 (by spectrophotometry), is strongly adsorbed on the surface of the mercury electrode. The polarographic wave is attributed to the reduction of Xylidyl Blue I in the complex. The method is very sensitive with a detection limit of 3 x 10(-8)M. The wave height is proportional to the concentration of uranium over the range 8 x 10(-8)-7 x 10(-6)M. Solvent extraction is used to separate possible interferences. The recommended procedure has been applied to the determination of trace amounts of uranium in ores.     

Cyclopentanone thiosemicarbazone, a new complexing agent for copper determination in biological samples by adsorptive stripping voltammetry.

A selective and sensitive stripping voltammetric method for the determination of trace amounts of copper(II) with cyclopentanone thiosemicarbazone (CPTSC) is presented. The method is based on the adsorptive accumulation of the resulting copper-CPTSC complex on a hanging mercury drop electrode, followed by the stripping voltammetric measurements at the reduction current of the adsorbed complex at -0.37 V vs. Ag/AgCl. The optimal conditions for the stripping analysis of copper include pH 9.3, deposition time of 120 s, and a deposition potential of -0.1 V (vs. Ag/AgCl). The peak current is linearly proportional to the copper concentration over a range 3.14 x 10(-9) M to 1.57 x 10(-6) M with a limit of detection of 1.57 x 10(-9) M. The technique has been applied to the determination of copper in biological samples, like urine and whole blood.     

Electroanalytical characteristics of enoxacin and their analytical application

In a 0.050 M HCl solution containing 0.12 M KCl, enoxacin yields a sensitive polarographic wave at -1.05 V, which can be used to determine trace amounts of the drug, the linear range being from 1.6 x 10(-8) to 1.6 x 10(-5) M with a detection limit of 6.25 x 10(-9) M. The electrochemical characteristics of the drug were studied by normal polarography, cyclic voltammetry and potentiostatic coulometry. A single-sweep polarographic procedure for the determination of enoxacin has been worked out and applied to urine and serum samples.     

Polarographic determination of indium(III) after salting-out extraction of the bromide complex into acetonitrile

A simple and sensitive method has been developed for the polarographic determination of indium(III) after solvent extraction into acetonitrile, salted-out from aqueous solution with sodium bromide. The extracted indium(III)-bromide complex gives a well-defined d.c. wave with E(1 2 ) = -0.69 V vs. SCE. The wave-height is directly proportional to the concentration of indium(III) from 1.6 x 10(-6) to 3.0 x 10(-4)M with respect to the original aqueous solution. In the a.c. polarographic method, a linear calibration curve is obtained for indium(III) over the concentration range from 1.6 x 10(-6) to 1.5 x 10(-5)M, and interference from most foreign ions can be eliminated. In particular, 10.0 mg of Fe(III) and 2.5 mg of Tl(III) are tolerated when 1.0 g of ascorbic acid is added. The lower limit of determination is 8 x 10(-8)M indium(III) by the square-wave polarographic method.     

Polargraphic adsorptive waves of alkaline-earth metal complexes with thymolphthalexone

Sensitive derivative polarographic adsorption waves have been observed for alkaline-earth metal-TP complexes in 0.15M potassium hydroxide containing 3 x 10(-5)M thymolphthalexone (TP). The limit of detection for calcium, strontium and barium was 7.5 x 10(-7)M and for magnesium 4.0 x 10(-6)M. The proposed method has been used successfully for determining trace amounts of calcium in natural waters and hair samples. The composition of the complex has been shown to be 1:1 alkaline-earth metal:TP and various experiments have confirmed that the wave is an adsorption wave. The reaction mechanism has been studied by a number of methods.     

Differential pulse polarographic determination of trace selenium(IV) and molybdenum(VI) using the catalytic hydrogen wave

In the presence of selenium(IV) and molybdenum(VI) a new polarographic peak appears which corresponds to a hydrogen catalytic wave. By differential pulse polarography a single, sharp peak at about -1.1 V is obtained, allowing trace determination of selenium(IV) and molybdenum(VI) in the range 1x10(-6)-5.0x10(-9) M with a linear calibration and a detection limit of 1.5x10(-9) M. The optimum conditions are found to be 0.1 M KNO(3) and a pH of about 3.2 (Britton-Robinson buffer). There is no serious interference from some ions when present at 1.0-40 times that of molybdenum. At higher amounts of interfering ions the interference is eliminated by the addition of EDTA.     

Polarographic determination of trace amounts of thorium

A sensitive linear-sweep polarographic method for the determination of thorium is described. It is based on the thorium complex with Xylidyl Blue I (XBI) in a medium containing ethylenediamine, 1,10-phenanthroline, oxalic acid and ninhydrin, at pH 10.5-11.5. The complex has been proved to be Th(XBI)(2), with log beta' = 9.6. The method can be used to determine trace amounts of thorium over the range 3.5 x 10(-8)-3 x 10(-6)M. The detection limit is 1 x 10(-8)M. A solvent extraction procedure is necessary to eliminate interference from several cations. The method has been applied to determination of traces of thorium in minerals, with good results.     

The polarographic and voltammetric behaviour of the copper(II) mitoxantrone complex and its analytical application

The polarographic and voltammetric behaviour of the copper(II)-mitoxantrone complex have been studied. A well-defined linear sweep voltammetric peak was obtained at -0.275 V (vs. Ag AgCl ) or -0.325 V (vs. SCE) in ammonia-ammonium chloride (20 mmoll(-1), pH 9.0). The characteristics of the peak have been examined in detail. The experimental results show that the reduction of the copper(II) mitoxantrone complex is irreversible and the peak displays adsorption characteristics at the dropping mercury electrode. A mechanism is proposed for the reduction of the complex, comprising one-electron reduction of the copper(II) of the complex, is reduced directly in the complex form. A single-sweep oscillopolarographic method was develped for the determination of copper(II). The peak current is proportional to the concentration over the range 5 x 10(-8)-2 x 10(-5) mol l(-1). The method reported here has the advantage that the interference of many common metal ions is small.     

Differential pulse polarographic determination of dicrotophos, crotoxyphos and chlorfenvinphos in grains and soils

A simple, sensitive and rapid differential pulse polarographic method has been developed for the quantitative determination of organophosphorus pesticides such as dicrotophos, crotoxyphos and chlorfenvinphos in agricultural formulations in universal buffers of a pH range 2.0-12.0. The sample is treated with ethanol to facilitate the dissolution of these pesticides. Both standard addition and calibration methods can be used for the analyses. The lower detection limits are 1.25x10(-9), 1.05x10(-9) and 1.0x10(-9) M, respectively. The method can be applied successfully to determination of these pesticides in grains and soil.     

Indirect polarographic determination of arsenic

A method for determination of arsenic(V) in the range between 1 x 10(-7) and 1.2 x 10(-6)M has been developed. These levels are reached by means of the multiplication factor yielded by use of 12-molybdoarsenic acid and the great sensitivity of polarographic determination of the Mo(VI) in the heteropoly acid. The procedure has been successfully applied to determination of arsenic in copper alloys, after selective extraction of phosphorus.     

Acetylacetone as chelating reagent, extracting solvent, and electrolysis medium: Polarographic determination of uranium(VI) and iron(III)

The chelating reagent acetylacetone has been examined as a polarographic medium; a method for its purification has been developed and it is found that the specific conductance is 4.2 x 10(-8) mho/cm, the accessible potential ranges are from -0.16 to -2.26 V vs. Ag/0.1M AgClO(4) for the pure solvent and from -0.35 to -2.20 V in the solvent after extraction. In pure solvent ferric acetylacetonate exhibits one wave and the uranyl complex gives two waves. After extraction from aqueous solution at pH 6.8-7.0, both metal acetylacetonates are reduced more reversibly and at more positive potential than in the pure solvent. Calibration curves are linear in the range 10(-5) -10(-3)M metal ion in the extract. The direct polarographic determination of uranium and iron in acetylacetone after extraction of the chelate from aqueous solution has been developed.     

Determination of nitrite in foods by single-sweep polarography

In an acid medium, nitrite diazotized with p-rosaniline and then coupled with 8-hydroxyquinoline in a weak alkaline medium produces azo compounds. The azo compounds produce a very sensitive polarographic wave at -0.70 V (versus the saturated calomel electrode). The height of the peak is linear with the concentration of nitrite in the range of 5 x 10(-9) to 5 x 10(-7) g/mL. The detection limit is 3 x 10(-9) g/mL. The electrochemical characteristics of the polarographic wave are also discussed. The method was used to determine nitrite in sausage. The results agree well with those obtained by spectrophotometry.     

Determination of copper with neocuproine by thermal-lens spectrometry

Conditions for the spectrophotometric determination of copper with 2,9-dimethyl-l,10-phenan-throline (neocuproine) in the presence of ascorbic acid in a water-ethanol solution (9 : 1) at pH 4.5–5.0 have been found. The detection limit is 3 x 10^-6 M. The concentration range is from 4.4 x 10^-6 to 3 x 10^-4 M. Conditions for the determination of copper(I) with neocuproine by thermal lens spectrometry have been proposed. The detection limit is 4 x 10^-7 M. The concentration range is from 7 x 10^-7 to 6 x 10^-5 M. Iron(II) at concentrations as high asn x 10^-4 M does not interfere with the determination of copper. Changes in the conditions for the photometric reaction associated with passing from spectrophotometric measurements to thermal lensing are discussed.     

稀土元素的电分析化学研究 IX:铽-8-羟基喹啉——-高氯酸钠的极谱配合附波

In this paper the polarographic behavior of terbium-oxine(Ox)- sodium perchlorate system has been studied. In the solution of NaClO4, Ox has a well defined single-sweep polarographic wave P1. After the addition of Tb3+ a new wave P2 appears at more negative potential. A linear calibration curve of the decrease of P1 is obtained in Tb3+ concentration range from 1.0X10-6M to 1.0X10-5M under the optimun conditions of pH4.0-4.5, 0.1M NaClO4-8X10-5M Ox. The wave height of P2 increases linearly with Tb3+ concentration from 3.0X10-6M to 3.0X10-5M in 0.1M NaClO4-2.0X10-4M Ox. It has been shown by applying a number of polarographic techniques that the wave is an adsorptive complex wave. We proposed the reduction processes of the complex and determined the dissocation constants of Ox.     

Polarographic determination of traces of zirconium in ores by use of complex-forming compounds adsorbable at the dropping mercury electrode

A polarographic method is proposed for the determination of trace zirconium down to the 5 x 10(-9)M level, based on the adsorption of the complex of zirconium with oxalic acid + cupferron + diphenylguanidine at the dropping mercury electrode in sodium acetate-acetic acid solution (pH 5.7). Under optimum conditions the wave-height is proportional to the concentration of zirconium in the range from 0 to 0.4 mug ml . The serious interference from titanium(IV) can be effectively eliminated by solvent extraction with 3% tri-n-octylamine from lN sulphuric acid and stripping with 0.1 M perchloric acid-lM hydrochloric acid-2M nitric acid mixture. The mechanism giving rise to the wave for the zirconium complex has been investigated. The method has been applied to the determination of trace zirconium in ores and ceramics.     

Polarographic analysis of the mixed-ligand system Cu(II)-glycine-glycinate

The polarographic method has been applied to the study of the mixed-ligand system Cu(II)-glycine-glycinate, in aqueous medium, at I = 1.0M (NaClO(4)) and 25 -/+ 0.1 degrees . The stabilization of the mixed complex [CuG(G(-))](+) has been made clear and its stability constant (beta(11) = 1 x 10(9)) has been determined. The stability constants of the complexes [CuG]I(2+) (beta(10) = 17), [CuG(2)](2+) (beta(20) = 230), [Cu(G(-))](+) (beta(01) = 2.1 x 10(8)) and [Cu(G(-))(2)] (beta(02) = 1.7 x 10(15)) have also been calculated.     

Investigations on adsorption potentiometry-part VIII. Determination of ultratrace copper in food by derivative adsorption chronopotentiometry

An electroanalytical method, based on derivative chronopotentiometry of the copper complex with 4-[(4-diethylamino-2-hydroxyphenyl) azo]-5-hydroxy-naphthalene-2,7-disulphonic acid (Beryllon III) accumulated on the surface of a hanging mercury drop electrode, for determining trace copper in food has been developed. The dependence of the peak height of reduction of the copper complex on the preconcentration time and preconcentration potential are discussed. Optimum experimental conditions include 0.01 M HOAc, 0.01M NaOAc, 1.0 x 10(-6) Beryllon III and a preconcentration potential of 0.10 V (vs. SCE). Under these conditions the detection limit and the linear range are 4 x 10(-11)M and 6 x 10(-11) -4 x 10(-7)M, respectively. The method was applied to samples of digested rice.     

Polarographic determination of osmium with the osmium(VIII)-cerium(IV)-arsenic(III) system

A highly sensitive and novel polarographic method has been developed for determination of ultratrace amounts of osmium, based on the catalysis of the cerium(IV)-arsenic(III) reaction by osmium(VIII). The reaction rate is monitored by measuring the arsenic(III) with a single-sweep oscillopolarograph. Osmium concentrations from 7.0 x 10(-11) to 5.0 x 10(-9)M can be determined by the initial rate method. The method has been applied to determination of osmium in refined ore and chlorination residues with satisfactory results.     

Differential pulse polarographic determination of ofloxacin in pharmaceuticals and biological fluids

A sensitive method is described for the determination of ofloxacin in its pure form, dosage forms and biological fluids. The proposed method depends upon the polarographic activity of ofloxacin in Britton Robinson buffers, whereby a well-defined cathodic wave is produced over the pH range 4.1-10.3. The wave was characterized as being irreversible, diffusion-controlled with limited adsorption properties. The current-concentration relationship was found to be rectilinear over the range 5x10(-5)-5x10(-4) M and 1x10(-5)-5x10(-4) M using the DC(t) and DPP modes respectively, with a minimum detectability (S/N=3) of 3x10(-7) M. The proposed method was successfully applied to the determination of ofloxacin in tablets and biological fluids. The results obtained were found to be in agreement with those obtained by a reference method.