二乙烯三胺衍生物对纤维素膜的增塑作用

用Ｎ－（２－胺基乙基）－Ｎ－正辛基－１，２－乙二胺和Ｎ－（２－胺基乙基）－Ｎ－正癸基－１，２－乙二胺增塑再生纤维素膜，并用红外光谱，差热分析以及力学性能测量研究了增塑后膜的结构与性能，实验表明，上述二种化合物对纤维素膜有良好的增塑作用，Ｎ－（２－胺基乙基）－Ｎ－正辛基－１，２－乙二胺水溶性大，和甘油增塑的情况相似，用水浸泡后，增塑效果基本丧失；而Ｎ－（２－胺基乙基）－正癸基－１，２－乙二胺用水浸包     

马来酸酐—醋酸乙烯酯梳状聚合物单阳离子导体的制备及表征

马来酸酐－醋酸乙烯酯交替共聚物以聚乙二醇单醚醇解，得到带有不同长度的聚醚氧侧链的羧酸型梳状聚合物，其碱金属盐在加入适当增塑剂成膜后，可作为聚合物单阳离子导体，其结构以非晶态为主，具有较低的玻璃化转变温度及较好的热稳定性，增塑后的室温电导率最高可达１０－５Ｓ／ｃｍ．研究发现，适当增加侧链的长度有利于提高聚合物膜的离子电导率．此外，还详细探讨了增塑剂、阳离子半径、温度及外加频率等因素对电导率的影响．     

新型热塑性淀粉的制备和性能

以二甲基亚砜(DMSO)为增塑剂, 通过熔融共混法制备了一种新型热塑性淀粉(TPS), 研究不同增塑剂含量对材料结构和性能的影响, 并与甘油及甘油/水复合增塑淀粉体系进行了比较. FTIR结果显示, DMSO能够与淀粉产生强烈而稳定的氢键相互作用. WAXD和SEM的研究结果表明, DMSO的加入破坏了淀粉的有序结构, 实现了淀粉的塑化, 形成均一的非晶连续相. 同甘油及甘油/水增塑体系相比, DMSO与淀粉的羟基形成更为稳定的氢键, 能够有效抑制淀粉的重结晶. 动态力学和拉伸力学性能测试结果表明, 经过DMSO的增塑, 有效降低了淀粉的玻璃化转变温度, 改善了材料的韧性, 增塑效率要好于甘油及甘油/水复合增塑体系.     

尿素/乙醇胺复配增塑聚乙烯醇性能的研究

采用尿素/乙醇胺为复合增塑剂,利用流延法制备了增塑改性的PVA膜.通过FTIR法研究了尿素/乙醇胺复合体系与PVA的相互作用,采用XRD、DSC考察了增塑改性PVA膜的结晶性能和热性能.研究结果表明,乙醇胺作为尿素的良溶剂,能有效抑制尿素从PVA基体中析出.由尿素、乙醇胺组成的复合增塑剂能破坏PVA分子中的氢键作用、降低PVA的结晶度和熔点,对PVA的增塑作用显著.增塑改性后的PVA膜在水中的溶胀率(DS)下降,溶失率(S)增加.力学性能测试表明增塑改性后的PVA膜拉伸强度(TS)降低,断裂伸长率(E%)提高.含30phr尿素/乙醇胺的PVA膜的拉伸强度、断裂伸长率分别为23.89MPa和542.88%.     

环境友好型增塑剂增塑PVC体系的性能测试与分析

以传统增塑剂邻苯二甲酸二辛酯(DOP)为参比对象,研究了对苯二甲酸二辛酯(DOTP)、环己烷1,2-二羧酸二异壬酯(DINCH)、聚酯3种环境友好型增塑剂增塑PVC体系的效果,对其力学性能、低温性能、稳定性能与光学性能等做了全面对比与分析。结果表明:在力学性能上,DOTP增塑PVC的效果最佳;在低温性能上,DINCH增塑PVC的效果最佳;在稳定性能上,聚酯增塑PVC的效果最佳;在光学性能上,DINCH增塑PVC的效果最佳。由此可见,针对不同使用领域,DOTP、DINCH和聚酯可取代统增塑剂DOP。     

带液晶侧基的交联二阶非线性光学聚合物的合成和极化

对硝基氧化偶氮苯缩水甘油醚（４）经酸碱开环反应合成得对硝基氧化偶氮苯甘油单醚（５）．ＤＳＣ和偏光显微镜结果表明这两种低分子化合物都能形成液晶相。将（５）与六亚甲基二异氰酸酯的缩二脲进行电场极化交联反应，合成了交联型非线性光学聚合物，用交温ＦＴＩＲ和ＤＳＣ研究了交联反应过程。利用紫外可见吸收光谱研究了膜极化交联前后的取向及取向稳定性。     

再生纤维素／聚乙烯醇共混膜的研究

由纤维素铜氨溶液与不同体积比（１－１０％）的聚乙烯醇（ＰＶＡ）水溶液共混制备了一系列再生纤维素共混膜．扫描电镜结果表明ＰＶＡ含量大于８％时，该共混膜产生明显相分离．当ＰＶＡ低于５％时，共混膜相容性较好．膜的结晶度，抗张强度，直角撕裂强度，断裂伸长及耐热性均优于单独用钢氨液制备的再生纤维素膜．此外，用流动速率法和超滤法测定了膜的孔径，渗透性及纯水通量，结果表明共混膜的孔性没有明显变化．本文得出：再生纤维素与５％ＰＶＡ共混能改善力学性能，并且能保持其生物降解性．     

氧化偶氮液晶二阶非线性光学聚合物的研究

将４－［对硝基苯基氧化偶氮苯基］甘油单醚与六亚四基二异氰酸酯的缩二脲进行电场极化交联反应，合成交联型非线性光学聚合物，并用ＦＴ－ＩＲ光谱和ＤＳＣ对交联反应过程进行了详细研究。利用紫外可见吸收光谱对膜极化前后的取向以及在室温和温下取向膜的稳定性进行了研究，并对极化膜的非线性光学系数ｄ３３了推算。     

聚合物单阳离子导体的制备—羧酸型梳状单离子导体

本文报道一种制备聚合物单阳离子导体的新方法。马来酸酐－醋酸乙烯酯及马来酸酐－苯乙烯共聚物以聚乙二醇单甲醚醇解，使酸酐环打开而得到带有聚乙二醇侧链的羧酸型梳状聚合物，其锂盐在加入适当增塑剂成膜后，可作为聚合物单阳离子导体，其结构以非晶态为主，具有较低的玻璃化转变温度及较好的热稳定性，增塑后的室温电导率最高可达１０＾－６Ｓ／ｃｍ。此外还研究了聚合物结构、阳离子半径、增塑剂、温度及外加额率等因素对电导率     

革除或减少增塑剂的敏感膜离子选择电极

基于国内外最新研究工作,系统总结了离子选择电极膜中革除或减少外增塑剂的新膜基体,包括丙烯酸酯类聚合物、羟基功能化的乙烯基树脂、聚氨酯、硅橡胶以及导电聚合物,对其物理化学性能以及传感器检测等进行了全面归纳与讨论.指出该类革除外增塑剂的传感膜不仅避免了增塑剂的泄漏及其对生物样品的污染,而且较传统增塑聚氯乙烯(PVC)膜扩散系数降低了约3个数量级,有利于抑制过膜离子流,使其检测下限较传统增塑PVC下降了5个数量级,且选择系数也有不同程度的改善.另外,该类传感膜材料由于与固体支撑材料间优良的粘附性保证了电极的使用寿命,特别是在微型化固态电极中.以这类传感膜构建的电位型离子传感器将以其独特的优势在环境监测、食品卫生,尤其是在医疗诊断、生物物质检测中展示出不可替代的作用.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.