Correlation of thermal degradation mechanisms: Polyacetylene and vinyl and vinylidene polymers

The thermal degradation of poly(vinyl bromide) (PVB), poly(vinyl chloride) (PVC), poly(vinyl alcohol) (PVA), poly(vinyl acetate) (PVAc), poly(vinyl fluoride) (PVF), poly(vinylidene chloride) (PVC₂), and poly(vinylidene fluoride) (PVF₂) has been studied by direct pyrolysis–mass spectrometry (DP-MS) and flash pyrolysis–gas chromatography–mass spectrometry techniques. Vinyl and vinylidene polymers exhibit two competitive thermal degradation processes: (1) HX elimination with formation of polyene sequences which undergo further moleculaar rearrangements, and (2) main-chain cleavage with formation of halogenated or oxigenated compounds. The overall thermal degradation process depends on the prevailing decomposition reaction in each polymer; therefore, different behaviors are observed. The thermal degradation of polyacetylene (PA) has also been studied and found important for the elucidation of the thermal decomposition mechanism of the title polymers.     

A study on correlation between physical properties and interfacial characteristics in highly loaded graphite–polymer composites

Highly loaded graphite–polymer composites for a bipolar plate of polymer electrolyte fuel cell are studied. One of the composites contains of polypropylene (PP), and graphite powder and the other contains of poly(vinylidene fluoride) (PVDF) and the graphite, respectively. The electrical and physical properties for the composites are determined. Inverse gas chromatography (IGC) measurements are carried out to characterize the surface of the graphite and the interface between the graphite and each polymer, following the Fowkes scheme. The IGC measurements show that the surface of graphite is nucleophilic and strongly attracts electrophiles by acid–base interaction. It is considered to be reasonable that the main chain carbon atoms to which electronegative fluorine atoms bond in PVDF are nucleophilic and has strong acid–base interaction with graphite. Such strong interaction causes high electric resistivity, high flexural properties, and high melt viscosity of the composite. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2568–2577, 2005     

Microhardness measurements of poly(methyl methacrylate) and poly(vinylidene fluoride) polyblends

The preparation of polymer blends of poly(methyl methacrylate) and poly(vinylidene fluoride) in different weight percentages is described. Vickers microhardness measurements have been made to study the effects of load and compositional ratio of the two polymers in polyblend. It is observed that poly(vinylidene fluoride) acts as a plasticizer for poly(methyl methacrylate). Evidence of increasing and decreasing strength of polyblends has been obtained for different compositional ratios of the two polymers.     

低头-头链含量的聚偏氟乙烯合成

研究了偏氟乙烯的聚合条件与其聚合物的头-头链含量的关系。实验表明聚合物的头-头链的含量与聚合温度有关,而与引发剂的种类无关。因而,可以在较低的聚合温度下聚合制得带有低的头-头结构(约3％)的聚偏氟乙烯。将聚合物链的A结构含量对其熔点作图,得一直线,可表示为方程式A=24.8+0.362T_m(％)。     

SYNTHESIS OF POLY(VINYLIDENE FLUORIDE) WITH LOW CONTENTS OF HEAD-TO-HEAD CHAIN

The relations between polymerization conditions of vinylidene fluoride and contents of head-tohead chain in the polymer have been studied. It shows that the contents of head-to-head chain of the polymer are related to its polymerization temperature, but are not related with the kinds of initiators used. Therefore, poly(vinylidene fluoride) with low contents of head-to-head chain (ca. 3%) can be prepared under lower polymerization temperature. Plot of the contents of A chains against melting points of the polymer is linear, which can be expressed by an equation: A=24.8 + 0.362 T_m(%).     

聚偏氟乙烯的辐射交联及其交联度的XPS表征

本文首次用XPS研究了聚偏氟乙烯的辐射交联机理,交联度的XPS表征。计算出聚偏氟乙烯的β值为0.7,发现聚偏氟乙烯的辐射交联的溶胶分数与辐照剂量的关系符合我们提出的通式^[1]。用XPS方法求得聚偏氟乙烯的凝胶化剂量为1.59mrad。     

Morphology control of poly(vinylidene fluoride) thin film made with electrospray

Thin polymer films of poly(vinylidene fluoride) were prepared with electrospray. Effects of solvent, initial spray concentration, temperature, solution conductivity, and polymer size on the film morphology were studied with AFM. The two main factors controlling polymer film morphology are the droplet size of the spray and the viscosity of the solution at deposition. These factors determine the flow of the polymer-solvent mixture over the substrate, the density of the film, and its smoothness. The solvent is a key parameter of the entire process. It affects spray stability, polymer solubility, droplet size of the spray, and viscosity of the solution at deposition. Solvents with a low vapor pressure provide a wider window for optimization of other parameters and are therefore preferred over solvents with high vapor pressure. The viscosity at deposition is mainly controlled with the initial spray concentration, polymer size, temperature, and droplet size. The droplet size is best controlled by the conductivity of the solution and the flow rate of the spray.     

Electron spin resonance spectra of polymers during fluorination

ESR spectra characteristic of peroxy radicals appeared rapidly in all of eleven hydrogen-containing polymers examined when treated with dilute fluorine. These radicals presumably result from the reaction of hydrocarbon and fluorocarbon radicals, existing at undetectably low steady-state concentrations, with the oxygen impurity content of commercial fluorine. In poly(vinylidene fluoride) films of thickness 11 and 58 μm the radical contents were nearly proportional to surface area rather than volume, in agreement with earlier reports of a shallow depth of penetration. Some polymers exhibited also or exclusively a broad spectral component, varying in character with the polymer; examples are polystyrene, polyethylene, poly (vinyl chloride), poly(vinylidene chloride), polyoctafluoropentadiene, polyhexafluoropropene, and a fluorinated graphite. The broad spectral component did not react with ordinary radical scavengers such as propylene and oxygen, and is probably not due to a fluorocarbon radical but to unknown transition metal fluorides.     

Electrochemical studies on PVC/PVdF blend-based polymer electrolytes

In recent years, special attention has been focused on the development of gel polymer electrolytes consisting of host polymers such as poly (acrylonitrile), PVC, poly (methyl methacrylate), poly (vinylidene fluoride) (PVdF), etc., as they may be found to have unique applications in consumer electronic and electric vehicle products. In the present study, blend-based polymer electrolytes composed of PVC, PVdF, NaClO₄, and propylene carbonate is prepared using the solvent casting technique. The thermal behaviors of PVC/PVdF polyblend films have been examined using differential scanning calorimetry and scanning electron microscopy. Miscibility studies were performed using X-ray diffraction and Fourier transform infrared. The role of interaction between polymer hosts on conductivity is discussed using the results of AC impedance studies.     

High breakdown strength and low loss binary polymer blends of poly(vinylidene fluoride‐trifluoroethylene‐chlorofluoroethylene) and poly(methyl methacrylate)

Dielectric materials with high breakdown strength and low loss are of crucial importance in capacitive energy storage electronics. Herein, a kind of polymer blend composed of poly(vinylidene fluoride‐trifluoroethylene‐chlorofluoroethylene) ferroelectric terpolymer and linear dielectric poly(methyl methacrylate) (PMMA) is presented. The polymer blend shows a breakdown strength of 733 MV/m and a charge‐discharge efficiency over 90% at 200 MV/m with optimized PMMA content, which are 101% and 28% higher than that of neat terpolymer. Moreover, microsecond discharge time of 2.26 μs, along with a power density that is 3.6 times that of the current commercially available biaxially oriented polypropylene, as well as great cyclic performance, has been achieved under an electric field of 200 MV/m. The findings of this research demonstrate that the incorporation of linear dielectric PMMA into poly(vinylidene fluoride)‐based ferroelectric polymer provides a new strategy in designing high breakdown strength low loss dielectric materials for reliable compact flexible film capacitors.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Review on gel polymer electrolytes for lithium batteries

This paper reviews the state-of-art of polymer electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on five polymer hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP) as electrolytes. Also the ionic conductivity, morphology, porosity and cycling behavior of PVdF-HFP membranes prepared by phase inversion technique with different non-solvents have been presented. The cycling behavior of LiMn₂O₄/polymer electrolyte (PE)/Li cells is also described.     

Structure and properties of nanocomposites based on zinc sulfide and poly(vinylidene fluoride)

The structure and properties of nanocomposites based on zinc sulfide and poly(vinylidene fluoride) were studied. The nanocomposite material was prepared by the matrix isolation technique: ZnS nanoparticles are formed by chemical reactions in a poly(vinylidene fluoride) powder of particle size 0.5–1.0 μm.     

Piezoelectricity,pyroelectricity, and the electrostriction constant of poly(vinylidene fluoride)

A new device for measuring the electrostriction constant of polymer films is described. Observed values for various polymers except poly(vinylidene fluoride) and poly(methyl methacrylate) agree well with those calculated from the Clausius-Mosotti equation. Elongational piezoelectricity, the pyroelectric current, and the electrostriction constant are measured for undrawn and roll-drawn poly(vinylidene fluoride) films. The piezoelectricity and pyroelectric current are attributed to space charges antisymmetrically distributed along thickness direction of the film for two reasons: (1) the polarity coincides between these two phenomena for all specimens, and (2) the piezoelectricity and the electrostriction constant have the same anisotropy for drawn films. Similarity of signs between piezoelectricity and pyroelectric current is observed also in poly(vinyl chloride) films. The electrical behavior of poly(vinylidene fluoride) is interpreted in terms of the ferroelectric nature of the β-form crystal.     

Fluorination of polyhydrofluoroethylenes. II. Formation of perfluoroalkyl carboxylic acids on the surface region of poly(vinylidene fluoride) film by oxyfluorination,fluorination, and hydrolysis

Oxyfluorination and postfluorination behaviors of poly(vinylidene fluoride) films, as well as hydrolysis of the films treated so far, have been studied by infrared (IR) spectrometry. By exposing the polymer film to a mixture of oxygen and fluorine at about 90°C acyl fluoride groups attendant on the scission of the polymer chains were formed. The oxyfluorinated molecules could be further perfluorinated with fluorine alone at about 90°C, leaving many of the acyl fluoride groups. When the properly oxyfluorinated and postfluorinated film was further treated with a hot 6M sodium hydroxide solution the opaque layer of perfluoroalkyl sodium carboxylate of high molecular weight was formed on the surface of the film, to about 3 μm in thickness, which behaved as a cation exchanger. This new type of cation exchanger of perfluoroalkyl carboxylic acid was significantly more acidic than the usual methacrylic acid exchanger. It was able to adsorb the sodium ions from a neutral sodium chloride solution up to about 70% of the exchange capacity and to keep the ions stable while washing them with water, though it could be regenerated to the hydrogen form with a dilute acetic acid solution. The nature of the new ion exchanger has been examined in some detail by IR spectrometry with Li⁺, Na⁺, and Cs⁺ ions.     

Sorption and swelling of semicrystalline polymers in supercritical CO2

The equilibrium sorption and swelling behavior of four different polymers—poly(methyl methacrylate), poly(tetrafluoroethylene), poly(vinylidene fluoride), and the random copolymer tetrafluoroethylene–perfluoromethylvinylether–in supercritical CO₂—are studied at different temperatures (from 40 to 80 °C) and pressures (up to 200 bar). Swelling is measured by visualization, and sorption through a gravimetric technique. From these data, the behavior of amorphous and semicrystalline polymers can be compared, particularly in terms of partial molar volume of CO₂ in the polymer matrix. Both poly(methyl methacrylate) and the copolymer of tetrafluoroethylene exhibit a behavior typical of rubbery systems. On the contrary, polymers with a considerable degree of crystallinity, such as poly(tetrafluoroethylene) and poly (vinylidene fluoride), show larger values of partial molar volume. These can be related to the limited mobility of the polymer chains in a semicrystalline matrix, which causes the structure to “freeze” during the sorption process into a nonequilibrium state that can differ significantly from the actual thermodynamic equilibrium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1531–1546, 2006     

Penetration of pores in membranes by plasma polymer forming species

Penetration of low‐temperature plasma polymer forming species through a microporous polycarbonate membrane was indicated by advancing contact angle measurement and scanning electron microscopoy of the membrane surface. No penetration of plasma polymer forming species was found in nylon and poly(vinylidene fluoride) membranes. This is attributed to the tortuous pore shapes of the nylon and poly‐(vinylidene fluoride) membranes compared to the straight cylindrical pore shape of the polycarbonate membrane.     

VISCOMETRIC STUDY OF POLY(METHYL METHACRYLATE) AND POLYSTYRENE BLENDS IN DIFFERENT SOLVENTS

The intermolecular interaction between poly(methyl methacrylate) (PMMA) and polystyrene (PS) intetrahydrofuran (THF) and N,N'-dimethyl formamide (DMF) solvents was studied at 28℃ using a dilute solution viscometrymethod. Solvent is believed to play a key role in characterizing the viscosity behavior of the polymer solution. The intrinsicviscosity and viscosity interaction parameter were experimentally measured for the binary (solvent/polymer) and for theternary systems in two solvents. The compatibility of the polymer mixture was discussed in terms of the sign of △b_m. Theresults show that the compatibility of PMMA/PS blend in DMF is larger than that in THF.     

Effect of poly(ethylene glycol) on the dielectric properties of poly(vinylidene fluoride)/BiFeO<Subscript>3</Subscript>/poly(ethylene glycol) composite films for electronic applications

In the present work a series of poly(vinylidene fluoride)/BiFeO₃/poly(ethylene glycol) composite films were prepared by solvent casting method with poly(vinylidene fluoride) as polymer matrix, bismuth ferrite as ceramic filler and poly(ethylene glycol) as binding agent as well as enhancer. The structural analysis of the composite films by X-ray diffraction confirms that the composites have a distorted rhombohedral structure. The micro-structural analysis shows that the use of poly(ethylene glycol)in the composite films enhances the homogeneity as well as compatibility of BiFeO₃ particles within the poly(vinylidene fluoride) matrix. The dielectric and electrical study done by impedance analyzer reveals that with an increase in poly(ethylene glycol) concentration, there is a subsequent increase in dielectric constant as well as AC electrical conductivity. Finally, the ferroelectric behavior of the composite confirms that the ferroelectric properties of the composites are enhanced by the addition of BiFeO₃ with an increase in poly(ethylene glycol) concentrations. These preliminary results give an idea for possible applications of this type of composites in the field of electronic applications.     

Thermal and ionic conductivity studies of plasticized PMMA/PVdF blend polymer electrolytes

Poly(methylmethacrylate) (PMMA)/poly(vinylidene fluoride) (PVdF) blend based electrolyte films containing different lithium salt concentrations are prepared using solvent casting technique. The complexation has been confirmed using XRD and FTIR spectral studies. Ionic conductivity and thermal behaviour of PMMA/PVdF complexes were studied with various salt concentrations, temperature and plasticizer content. The network structure of the polymer complexes are also investigated using SEM. The maximum value of conductivity 4.2×10⁻³ S/cm is obtained for the PMMA(7.5)-PVdF(17.5)-LiClO₄(8)-DMP(67) polymer complex at 303 K.