Preparation and characterization of poly (N-isopropylacrylamide-co-dimethylaminoethyl methacrylate) microgel latexes

Monodisperse cationic thermosensitive latex microgels have been prepared by radical-initiated precipitation polymerization of N-isopropylacrylamide, methylene bisacrylamide using 2,2′-azobis(2-amidinopropane hydrochloride) as an initiator and dimethylaminoethyl methacrylate (DMAEMA) as a cationic monomer. The final microgel latexes were characterized with respect to water-soluble polymer formation, particle size and size distribution. Adding cationic monomer (DMAEMA) was found to drastically affect the particle size, but not the size distribution as observed both by transmission electron microscopy and quasielastic light scattering (QELS). However, too high a DMAEMA concentration in the feed composition led to enhanced formation of water-soluble polymer. The volume phase-transition temperature of cleaned microgels examined by QELS (particle size versus temperature) was found to be around 32 °C and was slightly dependent on the concentration of the cationic monomer. The volume phase-transition temperature range becomes broader with increasing cationic monomer concentration. In addition, the pH of the polymerization medium was found to affect the final particle size and amount of water-soluble polymer formed. Received: 29 March 2001 Accepted: 2 July 2001     

N‐vinylcaprolactam‐based microgels: Synthesis and characterization

Poly(N‐vinylcaprolactam) (PVCL) is well known for its thermoresponsive behavior in aqueous solutions. PVCL combines useful and important properties; it is biocompatible polymer with the phase transition in the region of physiological temperature (32–38 °C). This combination of properties allows consideration of PVCL as a material for design biomedical devices and use in drug delivery systems. In this work, PVCL based temperature‐sensitive crosslinked particles (microgels) were synthesized in a batch reactor to analyze the effect of the crosslinker, initiator, surfactant, temperature, and VCL concentration on polymerization process and final microgels characteristics. The mean particle diameters at different temperatures and the volume phase‐transition temperature of the final product were analyzed. To obtain information about the inner structure of microgel particles, semicontinuous polymerizations were carried out and the evolution of the hydrodynamic average particle diameters at different temperatures of the microgel synthesized was investigated. In the case of microgel particles obtained in a batch reactor the size and the swelling‐de‐swelling behavior as a function of the temperature of the medium can be tuned by modulating the reaction variables. When the microgel particles were synthesized in a semibatch reactor different swelling‐de‐swelling behaviors were observed depending on particles inner structure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2510–2524, 2008     

Optimized buffered polymerizations to produce N-vinylcaprolactam-based microgels

Temperature-sensitive N-vinylcaprolactam (VCL)-based microgel particles were synthesized by emulsion polymerization in a batch reactor. To avoid the hydrolysis of VCL, optimized buffered reactions were carried out by using VCL as main monomer, N,N′-methylenebisacrylamide (BA) as cross-linker and a sugar-based comonomer (3-O-methacryloyl-1,2:5,6-di-O-isopropylidene-α-d-glucofuranose, 3-MDG). The amounts of initiator, cross-linker, surfactant, comonomer, and reaction temperature were the reaction variables. The effects of these variables on the kinetic features of the different polymerizations were analyzed. The colloidal characterization of the microgel particles consists of the analysis of the evolution of the average hydrodynamic diameters as a function of the temperature of the medium. The results showed that in all cases BA reacted faster than VCL. All final microgel particles showed swelling-de-swelling behavior by changing the temperature of the medium in which they are dispersed. Initially formed microgel particles were not temperature-sensitive being necessary up to about 30% of VCL conversion for the onset of the swelling-de-swelling behavior. The final colloidal characteristics of these new microgels can be tuned by modulating the reaction variables.     

Synthesis,characterization, and influence of synthesis parameters on particle sizes of a new microgel family

Poly(p‐nitrophenylacrylate‐co‐methacrylamide) and poly(p‐Nitrophenylacrylate‐co‐N,N′‐isopropylacrylamide) reactive microgels were synthesized by precipitation polymerization. The process was followed qualitatively by infrared spectroscopy (ATR‐FTIR) and microgels composition was determined by nuclear magnetic resonance (¹H NMR). Scanning electron microscopy of obtained colloidal particles showed strictly spherical morphologies with a moderate polydispersity. The average hydrodynamic particle diameter and particle size distributions were measured by quasi‐elastic light scattering and the particle size distributions obtained ranged from 100 to 600 nm. Several synthetic parameters affect the particle size of these materials and thus, indirectly, their properties and future applications. In this article, we report the influence of different polymerization reaction conditions in the final microgel dimensions. For example, we observed that the different solvent‐comonomer affinity induced a significant change in swollen particle size of the copolymeric microgels. On the other hand, the crosslinking density limited the particle sizes, but an excess of crosslinker content in the reaction mixture resulted in the opposite effect. Finally, we also studied the influence of initiator content in the mean particle size. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3833–3842, 2007     

Effect of thiol-containing monomer on the preparation of temperature-sensitive hydrogel microspheres

The main objective of this study is to prepare, thermally, sensitive microgel particles bearing thiol groups via precipitation polymerization of N-isopropylacrylamide (NIPAM), methylenebisacrylamide (MBA) and vinylbenzylisothiouronium chloride (VBIC) using 2-2′-azobis(2-amidinopropane)-dihydrochloride (V50) as initiator. The influence of various parameters has been investigated as a systematic study to point out the role of each reactant on polymerization conversion, and consequently, on particles and water-soluble polymer formation. The final microgel particles were characterized with respect to particle size and swelling ability. The aim of this paper is to complete our first short communication; Macromolecular symposia, 2000. 150: p. 283–290.     

The influence of PEG macromonomers on the size and properties of thermosensitive aqueous microgels

We describe the preparation and thermal response of aqueous microgels based on poly(N-vinyl caprolactam) containing grafted poly(ethylene glycol) (PEG) chains. These microgels were synthesized by free radical copolymerization of vinyl caprolactam and acetoacetoxyethyl methacrylate in the presence of methoxy-capped poly(ethylene glycol)methacrylate macromonomers. We show that variation of the amount of PEG macromonomer or the length of the PEG chain provides effective control of the microgel diameter in the range 60–220 nm. The presence of the grafted PEG chains improves the colloidal stability of the microgels. The incorporation of the PEG macromonomers into microgel structure decreases the swelling degree and induces a shift of the volume phase transition to higher temperatures. This paper is dedicated to Professor Haruma Kawaguchi in honor of his many contributions to the field of polymer particle synthesis and applications.     

Photo‐triggered microgel aggregation using o‐nitrobenzaldehyde as aggregating power source

In this work, cationic and anionic microgels which are mainly formed from thermal responsive polymer, poly(N‐isopropylacrylamide), are prepared and mixed in water. These microgels interact with each other due to the electrostatic interaction, and aggregate voluntarily. By applying the microgel aggregating system, photo‐responsive aggregating system is constructed by using o‐nitrobenzaldehyde (NBA), which reacts and releases hydrogen triggered by photo stimuli. The microgel aggregates in an aqueous solution of NBA re‐disperse depending on the irradiation time of UV light. In addition, by masking the UV irradiated area, the resultant shapes of microgel aggregates are controlled. The aggregated microgel shows rapid and drastic volume changes in response to heat. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1317‐1322     

Poly (N-isopropylacrylamide) microgel based assemblies for organic dye removal from water: microgel diameter effects

Poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel based assemblies (aggregates) were synthesized from microgels of various diameters via polymerization of the crosslinker N,N′-methylenebisacrylamide (BIS) in the presence of microgels in solution. We investigated the ability of the respective aggregates to remove the organic, azo dye molecule 4-(2-hydroxy-1-napthylazo) benzenesulfonic acid sodium salt (Orange II) from water at both room and elevated temperatures. The results from the microgel aggregates made from 1.1-μm-diameter [Parasuraman and Serpe. ACS Applied Materials & Interfaces, 2011] microgels were compared to aggregates synthesized from 321-nm and 1.43-μm-diameter microgels. Aggregates made from the same size microgels showed increased uptake efficiency as the concentration of BIS in the aggregates was increased, while for a given BIS concentration, the uptake efficiency increased with increasing microgel size in the aggregate. We attribute this to the “nature” of the aggregates; aggregates have void space between the microgels that can serve as reservoirs for Orange II uptake—the void spaces are hypothesized to increase with larger diameter microgels. By exploiting the thermoresponsive nature of the microgels, and microgel based aggregates, 85.3 % removal efficiencies can be achieved. Finally, all uptake trends for the aggregates, at room temperature, were fit with a Langmuir sorption isotherm model.     

Selenium‐Modified Microgels as Bio‐Inspired Oxidation Catalysts

Active colloidal catalysts inspired by glutathione peroxidase (GPx) were synthesized by integration of catalytically active selenium (Se) moieties into aqueous microgels. A diselenide crosslinker (Se X‐linker) was successfully synthesized and incorporated into microgels through precipitation polymerization, along with the conventional crosslinker N,N′‐methylenebis(acrylamide) (BIS). Diselenide bonds within the microgels were cleaved through oxidation by H₂O₂ and converted to seleninic acid whilst maintaining the intact microgel microstructure. Through this approach catalytically active microgels with variable amounts of seleninic acid were synthesized. Remarkably, the microgels exhibited higher catalytic activity and selectivity at low reaction temperatures than the molecular Se catalyst in a model oxidation reaction of acrolein to acrylic acid and methyl acrylate.     

A new strategy to prepare temperature-sensitive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microgels

In this study, a new method was developed to prepare temperature-sensitive poly(N-isopropylacrylamide) microgels by free radical precipitation polymerization using siloxane coupling agent as the new crosslinker. Ammonium persulfate acted as the initiator for the radical copolymerization as well as the catalyst for the hydrolysis/condensation of the siloxane groups. The particle diameter and polydispersity of the microgels were measured by photon correlation spectroscopy and the results display that the microgels are monodisperse. The microgels exhibit temperature sensitivity and the phase transition temperature is approximately 31 °C. Furthermore, the diameter of the microgels changes upon heating and cooling processes. These were observed to be reversible. The novel crosslinking method described herein is the condensation of siloxane groups, which is totally different from the traditional double-vinyl crosslinkers. This innovative approach offers an alternative path to prepare functional core–shell particles and inorganic/organic hybrid materials.     

Thermosensitive phase behavior and drug release of in situ gelable poly(N-isopropylacrylamide-co-acrylamide) microgels

In situ gelable poly(N-isopropylacrylamide-co-acrylamide) microgels were prepared by precipitation polymerization in the presence of various amounts of N,N′-methlenebisacrylamide as a crosslinker. The diameters of microgels were in the range of 200–300 nm with narrow distributions as determined by photo correlation spectroscopy. The equilibrium swelling ratio and thermosensitive properties of the microgels increased with decreasing crosslinker content. The volume phase transition of microgels dispersions at high concentrations were investigated by phase diagrams. The microgels dispersions experienced four phases when the temperature was increased: semitranslucent swollen gel, clear flowable suspension, cloud flowable suspension, and white shrunken gel. The related phase transition temperatures were influenced by crosslinker content and the concentration of the microgel dispersions. Herein, the gelation temperature was changed by more than 20 °C, shrinking temperatures were slightly changed by about 3 °C, and cloud point temperatures showed almost no change. The three phase transition temperatures of microgels dispersed in phosphate-buffered saline solutions were lower than that in water. As drug carriers, the release rates of bleomycin from bleomycin-loaded microgel dispersions exhibited diffusion control at human body temperature.     

Evidences of a hydrolysis process in the synthesis of N-vinylcaprolactam-based microgels

The hydrolysis process suffered by vinylcaprolactam (VCL) monomer during polymerization and the way of avoiding it is a matter of considerable interest when the final material is used in biomedical applications. In this work, in order to study the hydrolysis process in the synthesis of VCL-based microgels, VCL was polymerized by emulsion polymerization in batch and semi-batch reactors by using N,N′-methylenebisacrylamide (BA) as cross-linker and potassium persulfate (KPS) as initiator. Moreover, the partial conversion evolutions of VCL and BA were analyzed by ¹H NMR. The colloidal characterization was carried out by measuring the final average diameters as a function of temperature. The results showed that there were two competitive reactions (hydrolysis and propagation) in the polymerizations carried out in the absence of a buffer. However, VCL did not suffer hydrolysis by adding a buffer in the recipes. A new reliable method for the determination of the partial conversions was developed using the quantitative NMR method. The final cross-linked colloidal particles (microgel particles) obtained in the buffered reaction presented the conventional swelling de-swelling behavior corresponding to temperature sensitive microgels.     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Dynamic control of volume phase transitions of poly(N‐isopropylacrylamide) based microgels in water using hydrazide‐aldehyde chemistry

We demonstrate that the volume phase transition temperature (VPTT) of copolymer microgel particles made from N‐isopropylacrylamide (NIPAm) and methacryloyl hydrazide (MH) can be tailored in a reversible manner upon the reaction of the hydrazide functional groups with aldehydes. The microgels were synthesized by precipitation polymerization in water. Due to the water‐soluble nature of the MH monomer, the VPTT at which the microgel particles contract shifts to higher values by increasing the incorporated amounts of methacryloyl hydrazide from 0 to 5.0 mol %. The VPTT of the copolymer microgel dispersions in water can be fine‐tuned upon addition of hydrophobic/hydrophilic aldehydes, which react with the hydrazide moiety to produce the hydrazone analogue. This hydrazone formation is reversible, which allows for flexible, dynamic control of the thermo‐responsive behavior of the microgels. The ability to “switch” the VPTT was demonstrated by exposing hydrophilic streptomycin sulfate salt incubated microgel particles to an excess of a hydrophobic aldehyde, that is benzaldehyde. The temperature at which these microgels contracted in size upon heating was markedly lowered in these aldehyde exchange experiments. Transformation into benzaldehyde hydrazone derivatives led to assembly of the microgel particles into small colloidal clusters at elevated temperatures. This control of supracolloidal cluster formation was also demonstrated with polystyrene particles which had a hydrazide functionalised microgel shell. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1745–1754     

Synthesis of thermo‐responsive microgels in supercritical carbon dioxide using ethylene glycol dimethacrylate as a cross‐linker

Herein, we report the preparation of thermo‐responsive polymers in a green medium. The white, dry, fine powders were obtained directly from the cross‐linking polymerization of N‐isopropylacrylamide (NIPA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 10 to 28 MPa utilizing ethylene glycol dimethacrylate (EGDMA) as a cross‐linker. The effects of reaction pressure, cross‐linker ratio, initiator concentration, and reaction time were investigated. In the presence of this cross‐linker (26.4% w/w), much smaller poly(N‐isopropylacrylamide) (PNIPA) microgels (<0.2 µm diameter) were formed, and it was shown that the particle size and the morphology of the polymer were strongly dependent on the cross‐linker ratio in scCO₂. Copyright © 2009 John Wiley & Sons, Ltd.     

N‐vinylcaprolactam‐based microgels for biomedical applications

Three types of poly(N‐vinylcaprolactam)‐based temperature‐sensitive microgel particles were synthesized by emulsion polymerization. The uptake of a model drug (calcein) into the particles was analyzed in terms of the amount of calcein absorbed and equilibrium–swelling degree. By incubating the microgels with primary neuronal cell cultures of embrionary rats, cell viability and biocompatibility tests were carried out. The results show that the driving force for the model drug to penetrate into the microgel particles is H‐bonding associations. On the other hand, cell death was microgel concentration and incubation period dependent. Microgels can be stored in a dried state and resuspended in water when necessary without changing their swelling–deswelling ability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1173–1181, 2010     

Separation of <Superscript>125</Superscript>IBZM and <Superscript>125</Superscript>ILIS using polyacrylamide-acrylic acid resin

Radioiodination of both S(−)BZM and LIS was carried out using n-bromosuccimide(NBS) as a mild oxidizing agent. The factors affecting on the radiochemical yield such as pH, reaction time, substrate concentration and oxidizing agent have been studied. The chromatographic separation of both ¹²⁵IBZM and ¹²⁵ILIS was carried out using HPLC and poly(acrylamide-acrylic acid) resin P(AAm-AA). The copolymer was prepared by a template polymerization of AA in aqueous solution on PAAm as a template polymer and in the presence of N,N-methylenebisacrylamide (NMBA) as a crosslinker using gamma rays as initiator. The purifications of tracers were carried out using prepared resin compared with TLC and HPLC. The effects of pH buffer, variable elution volumes, flow rate and temperature on the separation process of the resin efficiency have been studied.     

Glucose sensitive poly (<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microgel based etalons

Thermoresponsive microgels have been shown to be an excellent platform for designing sensor materials. Recently, poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel based etalon materials have been described as direct sensing materials that can be designed to have a single, unique color. These color tunable materials show immense promise for sensing due to their spectral sensitivity and bright visual color. Here, we describe a proof-of-concept for etalon sensing of glucose. We found that aminophenylboronic acid (APBA)-functionalized pNIPAm-co-AAc microgels in an etalon respond to 3 mg/mL glucose concentrations by red shifting their reflectance peaks by 110 nm up to 150 nm. Additionally, APBA-functionalized pNIPAm-co-AAc microgels have a depressed volume phase transition temperature at 18–20 °C, which shifts to 24–26 °C after glucose binding. We also demonstrate that these materials show a marked visual color change, which is a first step towards developing direct read-out sensor devices.     

Equilibrium and kinetic aspects of the pH-dependent swelling of poly(2-vinylpyridine-co-styrene) microgels

 Monodisperse, cationic microgels were synthesized by surfactant-free emulsion copolymerization of 2-vinylpyridine and styrene, using the cationic initiator 2,2′-azobis(2-amidinopropane) dihydrochloride. Low levels of divinylbenzene were employed as a cross-linking agent. The particle morphologies and diameters were characterized by a combination of TEM and photon correlation spectroscopy. At styrene contents less than 40% by weight, the particles were spherical with diameters of approximately 200 nm. The diameter decreased with increasing styrene content and the morphology changed from spherical to irregular. The pH-dependent swelling of the microgel particles was studied in constant ionic strength acetate buffers, as a function of styrene content and cross-link density. Particle diameters increased sharply below pH 4.6 due to ionization of the 2-vinylpyridine residues. At higher styrene levels, the transition pH is shifted to lower values and the extent of swelling is reduced. The pH at which swelling occurred was identical for the three cross-linker levels (0.25, 0.50 and 1.5 wt%), but the extent of swelling decreased in this order as expected. The rate of swelling of the particles was investigated by stopped-flow spectrophotometry; as microgels swell the turbidity of the dispersions decreases and this was followed as a function of time. Higher styrene contents not only reduce the extent of swelling, but also the rate at which maximum swelling is reached, whereas the level of cross-linker employed in this study has no effect on the rate of swelling. Received: 26 May 1997 Accepted: 16 July 1997     

Temperature‐Modulated Water Filtration Using Microgel‐Functionalized Hollow‐Fiber Membranes

In the present work, we investigate the potential of aqueous polymer microgels in membrane technology, especially for filtration applications. The poly(N‐vinylcaprolactam)‐based microgels exhibit thermoresponsive behavior and were employed to coat hollow‐fiber membranes used for micro‐ and ultrafiltration. We discuss the preparation of microgel‐modified membranes (by “inside‐out” as well as “outside‐in” filtration in dead‐end mode). The clean‐water permeability and stability of these membranes was studied not only as a function of time, but also of temperature. The microgel‐modified membranes exhibit a reversible thermoresponsive behavior whereby both the resistance and the retention increased with decreasing temperature.