Large Pore Mesoporous MCM-41 Templated from Cetyltriethylammonium Bromide

Following hydrothermal synthesis process, MCM-41 was synthesized by using cetyltfiethylammonium bromide as templating agent. The experimental results showed that MCM-41 with pore diameter in the range of 4-7 nm can be obtained by adjusting nSurf./nSi. It was proved that cetyltriethylammonium bromide is an effective templating agent for increasing pore diameter of molecular sieve MCM-41.     

模板剂对全硅MCM-41介孔分子筛结构的影响

分别采用十六烷基三甲基溴化铵和十六烷基三乙基溴化铵作为模板剂,硅溶胶为硅源,用水热晶化法在碱性（NaOH）介质中合成了MCM-41介孔分子筛样品.通过XRD、N2吸附-脱附、TG-DTA、IR等测试手段对这两种样品进行了对比表征分析.考察了两种不同模板剂对其晶体结构、比表面及孔径大小的影响.实验结果表明,相对于十六烷基三甲基溴化铵做模板剂,采用大头基的十六烷基三乙基溴化铵可以合成较大孔径和孔容（分别为4.72 nm和1.14 cm3•g-1）的MCM-41介孔分子筛,而且具有较窄的孔径分布,因此对于合成大孔径的介孔分子筛MCM-41,十六烷基三乙基溴化铵是一种很好的模板剂.     

辅助有机胺对介孔分子筛MCM-41合成及其性质的影响

采用阳离子表面活性剂十六烷基三甲基溴化铵为模板剂、硫酸铝为铝源、硅溶胶为硅源，分别使用中等链长的有机胺和正己烷作为辅助添加剂，用水热晶化法在碱性介质中合成了介孔分子筛MCM-41，通过XRD、N2吸附-脱附、SEM测试手段对得到的样品进行了对比表征分析。实验结果表明，除三乙胺外，向反应体系中加入适量的三正丙胺、三正丁基胺、三正辛胺和二异丁胺后，均能够使介孔 MCM-41的d100值和孔径增大，且具有较大的BET表面积（>1 000 m2/g）和孔容（>1 cm3/g）；加入正己烷后，也可以使得MCM-41孔径变大，但是和加入有机胺相比较，合成的样品具有较小的BET表面积（887.3 m2/g）和孔容（0.81 cm3/g）。     

A Novel Method for the Synthesis of Mesoporous Molecular Sieve MCM-41

Using glycerol, glycol and water as solvent, cetyltrimethylammonium bromide (CTAB) as template, tetraethyl orthosilicate (TEOS) as silica source, ethylenediamine (EDA) as base source, mesoporous molecular sieve MCM-41 has been synthesized at room temperature, characterized by X-ray power diffraction and N2 adsorption. Compared with the samples synthesized by glycol and water, the samples synthesized by glycerol have larger pore diameter and high surface areas. Thus glycerol is an efficient solvent for preparing larger pore mesoporous MCM-41.     

AlMCM-41介孔分子筛的合成及表征

以拟薄水铝石为铝源、水玻璃为硅源、十六烷基三甲基溴化铵为模板剂,在110℃时水热晶化合成了含Al的MCM-41介孔分子筛.采用X射线衍射(XRD)、N2吸附-脱附、固体29Si、27Al魔角旋转核磁共振技术(MASNMR)、扫描电镜(SEM)及吡啶吸附傅里叶变换红外(FTIR)光谱技术对AlMCM-41分子筛进行了表征.结果表明:AlMCM-41分子筛具有六方排列的孔道结构,同时具有很高的相对结晶度、比表面积和孔容,且孔分布单一;AlMCM-41分子筛中Si原子在骨架内键合的程度更高,使AlMCM-41分子筛具有更好的骨架晶化程度;同时具有四配位骨架铝,使AlMCM-41介孔分子筛具有适当的酸性.     

Synthesis and catalytic performance of ZSM-5/MCM-41 composite molecular sieve from palygorskite

ZSM-5/MCM-41 composite molecular sieve has been hydrothermally synthesized through a two-step crystallization process using palygorskite (PAL) as silicon and aluminum source. The products were characterized by various means and their catalytic properties for acetalization of cyclohexanone and esterification of acetic acid and n-butanol were also investigated. In the first step ZSM-5 zeolite could be formed from the acid-treated PAL after hydrothermal treatment using tetrapropylammonium bromide as template. XRD patterns, N₂ adsorption and desorption data, and TEM images show that the composite obtained in the secondary step had a well-ordered mesoporous MCM-41 phase and a microporous ZSM-5 zeolite phase. Compared with ZSM-5, ZSM-5/MCM-41 composite possessed more total acid amount, weak acid sites and large pore structure due to the formation of MCM-41 and exhibited higher catalytic activity for the acetalization and esterification reaction.     

杂原子介孔Ce-MCM-41分子筛的制备及其吸附脱除甲硫醚性能

以十六烷基三甲基溴化铵为模板剂,正硅酸乙酯(TEOS)为硅源,硝酸铈为铈源,采用水热法合成了杂原子介孔分子筛Ce-MCM-41。XRD和FT-IR表征结果表明,当加入的Ce/Si物质的量比小于0.04时合成了规整有序的介孔结构,并将Ce原子引入到MCM-41骨架中。N₂吸附-脱附测试获得MCM-41和Ce-MCM-41(Ce/Si物质的量比为0.04)的平均孔径分别为2.82和2.46 nm,孔容分别为0.762 1和 0.689 4 m³/g,BET比表面积分别为986.42和756.8 m²/g。NH₃-TPD表征结果表明,Ce-MCM-41的酸性要明显强于MCM-41,但两种分子筛的酸性均较弱。利用合成的MCM-41和Ce-MCM-41吸附脱除甲硫醚浓度为58 μg(甲硫醚)/g的甲硫醚/氮气混合气中的甲硫醚。甲硫醚分子尺寸的模拟结果为0.464 8 nm,可以很容易地进入分子筛的介孔孔道中。由于Ce-MCM-41分子筛具有较多的酸量,其硫吸附容量7.52 mg(S)/g明显高于MCM-41的4.57 mg(S)/g。MCM-41和Ce-MCM-41都具有较好的再生性能,再生3次后硫吸附容量仍可恢复到初始容量的80%,分别为3.52和 5.86 mg(S)/g。     

锌锡双金属掺杂MCM-41的合成及表征

以硅酸钠为硅源, 锡酸钠，硝酸锌为金属源，十六烷基三甲基溴化铵为模板剂，采用直接水热合成法合成出了锌锡双金属同时掺杂的介孔MCM-41。通过ICP﹑XRD、TG-DTA﹑FTIR﹑HRTEM以及BET等技术对材料的结构和性质进行了表征。结果表明，合成的材料具有典型的六方介孔结构，比表面高，孔分布窄，热稳定性较高，且锌锡可能进入介孔MCM-41骨架中。该材料对苯酚羟基化反应具有良好的催化性能，双金属修饰MCM-41催化活性明显优于单组分掺杂。     

以混合表面活性剂为模板可控合成MCM-48和MCM-41分子筛

利用阳离子和三嵌段共聚物混合表面活性剂为模板,在水热条件、碱性介质中可控合成出MCM-48和MCM-41分子筛。在固定P123(聚氧乙烯-聚氧丙烯-聚氧乙烯三嵌段共聚物):TEOS(正硅酸乙酯)(物质的量的比)为0.01875的体系中,调节CTAB(十六烷基三甲基溴化铵)∶TEOS(正硅酸乙酯)物质的量比值m,当m在0.12~0.13范围合成出MCM-48分子筛;当m在0.04~0.08范围合成出MCM-41分子筛。通过XRD,TEM,N2物理吸附,IR等方法进行了表征。结果表明:聚氧乙烯-聚氧丙烯-聚氧乙烯三嵌段共聚物(P123)的加入可以更大程度地降低合成介孔材料所需阳离子表面活性剂的用量;可控合成的介孔材料具有高比表面积、高度有序的孔道结构、较集中的孔径分布。     

MCM-41分子筛合成与模版剂回收新方法

研究了以溴代十六烷基吡啶（CPBr）为模板剂,正硅酸乙酯（TEOS）为硅源,在强酸性介质中形成MCM-41介孔分子筛六方晶相的过程中,HCI／TEOS对分子筛结构的影响．发现随HCI／TEOS提高,分子筛结晶度、晶胞参数、孔道壁厚明显增加,孔径呈减少趋势．同时还发现包结于分子筛孔道中的CPBr100％可以通过丙团／水混合溶剂萃取回收．据此,本文对MCM-41分子筛的“S X-I ”超分子组装机理及分子筛孔道内模板剂的存在状态进行了进一步探讨．     

Preparation of MCM-41 silica using the cationic surfactant blend

A series of samples of MCM-41 silica was synthesized using surfactant blends of 1-alkyl-3-methylimidazolium and alkyltrimethylammonium salts or blends of two different 1-alkyl-3-methylimidazolium salts (alkyl denotes octyl or hexadecyl) as structure-directing agents. The precipitation of solid particles from a homogeneous water solution of sodium metasilicate and surfactant blend was achieved by lowering the pH due to the hydrolysis of ethyl acetate added. The molecular sieves were characterized by scanning as well as transmission electron microscopy, X-ray powder diffraction, and nitrogen adsorption using a proper nonlocal density functional theory approach for calculations of the textural parameters. All the prepared silicas were of MCM-41-type; they differ in the integral breadth of the pore size distribution curve and the presence of secondary mesopores. The best quality MCM-41 silica of spherical particle morphology was synthesized by using of optimized blend of hexadecyltrimethylammonium bromide and 1-methyl-3-octylimidazolium chloride. The results obtained showed that spherical particles are composed of domains of perfectly ordered hexagonal porous structure. Some samples prepared by using 1-alkyl-3-methylimidazolium salts featured a narrow pore size distribution. However, they contained a small volume of secondary mesopores.     

以离子液体为结构导向剂合成有序超微孔二氧化硅

在酸性条件下, 以1-十六烷基-3-甲基溴化咪唑为表面活性剂合成了具有有序超微孔结构的二氧化硅材料, 所合成的材料具有较高的比表面积和二维六方有序的孔结构, 样品的孔径尺寸为1.8 nm.     

Cerium modified MCM-41 nanocomposite materials via a nonhydrothermal direct method at room temperature

Ce-containing MCM-41 materials were prepared via a direct, nonhydrothermal method at room temperature from tetra-ethoxysilane, n-hexadecyl trimethyl ammonium bromide, ammonia solution, and cerium(IV) ammonium nitrate precursors. Composite materials containing the nominated ratios of 5 and 10% (w/w) CeO2/MCM-41 were targeted. The obtained materials were investigated by TGA, DSC, FTIR, diffuse reflectance UV-vis, XRD, N2 adsorption/desorption isotherms, and SEM. Results indicated the insertion of cerium ions in tetrahedral environment in the framework of MCM-41. BET surface area amounting to 824 and 726 m2/g; total pore volume amounting to 0.427 and 0.515 cm3/g; and narrow pore size distribution maximizing at 22.5 and 23.7 A, respectively were obtained for the 5 and 10% CeO2/MCM-41 calcined composites. SEM showed a spherical type morphology for the composites which is rather similar to their blank MCM-41, and no clear ceria aggregates were observed on the external surfaces of composites spherical particles. Thus, the adopted method allows the persistence of MCM-41 texture with cerium inserts in the framework of MCM-41 and/or forms finely divided ceria nanoparticles on the wall of MCM-41 materials. Moreover, stabilization of any formed ceria nanoparticles was attributed to the short nonintersecting porous nature of MCM-41 matrix, which hinders their aggregation upon calcinations.     

Characterization of V-MCM-41 Mesoporous Materials

A series of vanadosilicate V-MCM-41 mesoporous materials with various compositions have been synthesized using vanadium sulfate as the source of vanadium. Hexadecyltrimethylammonium bromide was used as a surfactant in the synthesis. The samples were characterized with nitrogen sorption, X-ray diffraction, framework FTIR, diffuse reflectance UV-visible spectroscopy, differential thermal analysis, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The results show that the solid products had the MCM-41 structure and contained only atomically dispersed vanadium consistent with framework vanadium in V-MCM-41. N₂ sorption measurements and TEM demonstrated the high mesoporosity of V-MCM-41. The incorporation of vanadium into MCM-41 decreased the surface area to some extent. The morphology of V-MCM-41 was plate with stepped and smooth surfaces. TEM reveals a regular hexagonal array of uniform channels with curved and rectilinear morphologies. The hexagonal array structure of uniform pore size was observed by TEM. It is proved that the pores were highly aligned.     

Template transformations in preparation of MCM-41 silica

Template transformation in MCM-41 material during thermal treatment under different conditions was investigated on the basis of thermogravimetry (TG-DTA), X-ray diffraction (XRD) and positron annihilation lifetime spectroscopy (PALS). Micelle templated silica was prepared using C18 trimethylammonium bromide. The pore structure of MCM-41 samples obtained after removal of the surfactant in air, argon flow and vacuum was analyzed on the basis of the adsorption isotherms of nitrogen at 77 K and XRD experiments. The TG-DTA experiments confirm the mechanism of the template removal known from literature. However, the sequence of the processes during thermal treatment of as-synthesized sample and temperature of transformations depended strongly on the presence of oxygen and the heating rate. The main template degradation took place below 573 K and was independent of the kind of atmosphere above the sample. Residual carbonaceous species are removed from pores and the external surface of MCM-41 silica upon heating to 823 K by combustion or evaporation. The latter process as well as translocation of liquid-like products of template degradation from the pore interior to external surface was confirmed by PALS experiment in vacuum.     

Effect of auxiliary chemicals on preparation of silica MCM-41

Silica MCM-41 materials were prepared hydrothermally by using 1,3,5-trimethylbenzene (MS) or 1,3,5-triisopropylbenzene (TI) as an auxiliary chemical. The BJH poressize of MCM-41 increased up to 12 nm with increasing amounts of MS. However, MCM-41 materials prepared with MS displayed irregular pore arrangements and a half of these materials exhibited low thermal and hydrothermal stabilities. On the other hand, MCM-41 materials prepared with TI as an auxiliary chemical displayed regular pore arrangements and high thermal and hydrothermal stabilities, but their BJH pore sizes did not go over 4.0 nm (intrinsic value; ca. 5 nm). MCM-41 prepared with TI together with a small amount of MS (TI/MS/SiO₂=1.5/0.5/1) displayed regular pore arrangements and high thermal and hydrothermal stabilities. Its BJH pore size was 4.7 nm (intrinsic value; ca. 6 nm).     

YOx -MCM-41介孔分子筛的合成与表征

以十六烷基三甲基溴化铵为模板剂,偏硅酸钠为硅源,硝酸钇为钇源,用水热法合成了YOx-MCM-41介孔分子筛,经X射线粉末衍射法,FT-IR,热重分析,紫外漫反射法及N2吸附-脱附法表征。结果表明,该分子筛具有热稳定性好、比表面积大、孔道均一等典型的MCM-41介孔分子筛的特征。     

Siliceous mesoporous material templated with hexadecyltrimethylammonium bromide–sodium dehydrocholate mixed micelles

A mixture of sodium dehydrocholate (NaDHC) and hexadecyltrimethylammonium bromide (HDTAB) was employed as a template to produce mesoporous silica. The obtained material shows the same structure as common MCM-41 sieves, but the pore radius distribution is narrower than that of the material produced with the same concentration of pure HDTAB. The average pore radius is also larger than that of the pure HDTAB-templated material.     

Study of the Adsorption Properties of MCM-41 Molecular Sieves Prepared at Different Synthesis Times

The variation of surface properties of SiMCM-41 and AlMCM-41 nanoporous materials as function of synthesis time was examined. The main properties studied were: surface area, pore diameter, pore volume, mesoporous parameter, and wall thickness. Siliceous MCM-41 molecular sieves were synthesized starting from hydrogels with the following molar compositions: 4.58SiO₂:0.435Na₂O:1 CTMABr:200 H₂O for SiMCM-41, and 4.58SiO₂:0.485 Na₂O:1 CTMABr:0.038 Al₂O₃:200 H₂O, for AlMCM-41. Cetyltrimethylammonium bromide (CTMABr) was used as the structural template. The crystallographic parameters were obtained from XRD data and by nitrogen adsorption using the BET and BJH methods. The results obtained showed a significant variation of the surface properties of the MCM-41 materials as a function of the synthesis time reaching silica wall thickness of ca. 2 nm on the fourth day.     

氮气在MCM－41分子筛中的吸附：实验和分子模拟

用美国Micromeritics公司生产的ASAP2010物理吸附仪测定了低温（77 K） N_2在MCM-41分子筛中的吸附等温线，获得了表征MCM-41特征的BET比表面、BJH孔 容和平均孔径。同时用巨正则Monte Carlo（GCMC）模拟方法考究了N_2在MCM-41中 的吸附，得到了N_2在MCM-41中的模拟吸附等温线，分析了流体在MCM-41分子筛中 的微观结构。GCMC模拟中MCM-41介孔材料模型化为圆柱孔，N_2模型化为Lennard- Jones（LJ）球。N_2和MCM-41介孔墙壁间的相互作用采用Tjatjopoulos-Feke- Mann（TFM）势能模型进行表征。通过使模拟和实验结果有一个好的吻合，确定了 一组有效的MCM-41分子筛的势能参数（σ_(ww) = 0.265 nm，∈_(ww)/k = 190 K ）。这为以后其他吸附质在MCM-41中吸附的预测奠定了基础、提供了依据。