Novel octahedral nickel(II) dithiocarbamates with bi- or tetradentate N-donor ligands: X-ray structures of [Ni(Bzppzdtc)(phen)2]ClO4 · CHCl3 and [Ni(Bz2dtc)2(cyclam)]

A series of novel octahedral nickel(II) dithiocarbamate complexes involving bidentate nitrogen-donor ligands (phen = 1,10-phenanthroline, bpy = 2,2′-bipyridine) or a tetradentate ligand (cyclam = 1,4,8,11-tetraazacycloteradecane) of the composition [Ni(BzMetdtc)(phen)₂]ClO₄ (1), [Ni(Pe₂dtc)(phen)₂]ClO₄ (2), [Ni(Bzppzdtc)(phen)₂]ClO₄ · CHCl₃ (3), [Ni(Bzppzdtc)(phen)₂](SCN) (4), [Ni(BzMetdtc)(bpy)₂]ClO₄ · 2H₂O (5), [Ni(Pe₂dtc)(cyclam)]ClO₄ (6), [Ni(BzMetdtc)₂(cyclam)] (7), [Ni(Bz₂dtc)₂(cyclam)] (8) and [Ni(Bz₂dtc)₂(phen)] (9) (BzMetdtc = N,N-benzyl-methyldithiocarbamate(1-) anion, Pe₂dtc = N,N-dipentyldithiocarbamate(1-) anion, Bz₂dtc = N,N-dibenzyldithiocarbamate(1-) anion, Bzppzdtc = 4-benzylpiperazinedithiocarbamate(1-) anion), have been synthesized. Spectroscopic (electronic and infrared), magnetic moment and molar conductivity data, and thermal behaviour of the complexes are discussed. Single crystal X-ray analysis of 3 and 8 confirmed a distorted octahedral arrangement in the vicinity of the nickel atom with a N₄S₂ donor set. They represent the first X-ray structures of such type complexes. The catalytic influence of complexes 2, 3, 6, and 7 on graphite oxidation was studied and discussed.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.     

Structural characterization of [Fe(NO)(mnt)2] salts

The iron dithiolene compounds [Fe₂(mnt)₄]²⁻ [1]²⁻ and [Fe(NO)(mnt)₂]ⁿ (n = 1−, [2]¹⁻; n = 2−, [2]²⁻) ([mnt]²⁻ = maleonitriledithiolate = [(NC)₂C₂S₂]²⁻) have been characterized structurally by X-ray diffraction as their [Et₄N]⁺ salts at 100 K. Dianion [2]²⁻ is prepared from [2]¹⁻ by reduction with Na[Et₃BH] and is observed to have a bent Fe-NO angle at 149.9(5)° in contrast to the linear configuration of Fe-NO in [2]¹⁻ (180.0°). The change from linear to bent binding mode for NO, an increase of more than 0.1 Å in the Fe-N bond length, and the relative invariance of the Fe-S distances for [2]²⁻ versus [2]¹⁻ indicate that the NO ligand is the site of reduction. The [Et₃NH]⁺ complex of [2]¹⁻ was also identified by crystallography and found to have hydrogen bonding contacts between [Et₃NH]⁺ and the cyano nitrogen atom of an [mnt]²⁻ ligand. Furthermore, relatively close S?S contacts (3.602-3.615 Å) occur between [2]¹⁻ anions, which pack together in an offset, head-to-head fashion. These S?S contacts are absent in the structure of [Et₄N][2]. Infrared spectra show an energy decrease for, and a significant broadening of, the NO bond stretching absorption peak in [2]²⁻, which is consistent with a bent NO ligand sampling a range of conformations both by facile pivoting about the Fe-N axis and by a breathing of the Fe-NO angle.     

Transition metal complexes with thiosemicarbazide-based ligands. Part LIV. Nickel(II) complexes with pyridoxal semi- (PLSC) and thiosemicarbazone (PLTSC). Crystal and molecular structure of [Ni(PLSC)(H2O)3](NO3)2 and [Ni(PLTSC-H)py]NO3

This paper describes the synthesis of the first Ni(II) complexes with pyridoxal semicarbazone (PLSC), viz. Ni(PLSC)Cl₂ · 3.5H₂O (1), [Ni(PLSC)(H₂O)₃](NO₃)₂ (2), Ni(PLSC)(NCS)₂ · 4H₂O (3), [Ni(PLSC-2H)NH₃] · 1.5H₂O (4), as well as two new complexes with pyridoxal thiosemicarbazone (PLTSC), [Ni(PLTSC-H)py]NO₃ (5) and [Ni(PLTSC-H)NCS] (6). Complexes 1–3 are paramagnetic and have most probably an octahedral structure, for complex 2 this was proved by X-ray diffraction analysis. In contrast, complexes 4–6 are diamagnetic and have a square-planar structure, and in the case of complex 5 this was also confirmed by X-ray structural analysis. In all cases the Schiff bases are coordinated as tridentate ligands with an ONX (X = O, PLSC; X = S, PLTSC) set of donor atoms. With the complexes involving the neutral form of PLSC and the monoanionic form of PLTSC, the PL moiety is in the form of a zwitterion. In addition to the above-mentioned techniques, all the complexes were characterized by measuring their molar conductivities, UV–Vis and partial IR spectra.     

Unusual spin gap transition observed in two new molecular magnets based on [Ni(mnt)2] monoanion (mnt=maleonitriledithiolate)

Two new molecular magnets, [RBzPyN(CH₃)₂][Ni(mnt)₂] [mnt²⁻=maleonitriledithiolate; [RBzPyN(CH₃)₂]⁺=1-(4′-R-benzyl)-4-dimethylaminopyridinium; R=CN(1), F(2)], with unusual magnetic properties have been prepared and characterized. Both 1 and 2 form a 3D network structure in which the [Ni(mnt)₂]⁻ anions form a 1D magnetic chain for 1 and a stepwise stack for 2via weak π…π stacking interactions, C…C or C…N short interactions between the neighboring anions. Magnetic susceptibility measurements in the temperature range 1.8-300 K indicated that 1 and 2 show unusual spin gap transition around 30 K and 110 K, respectively. The transition for 1 and 2 is the second-order phase transition as determined by the capacity measurement.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Syntheses, crystal structures and DFT studies of [Me3EM(CO)5] (E = Sb, Bi; M = Cr, W), cis-[(Me3Sb)2Mo(CO)4], and [Bu3BiFe(CO)4]

Syntheses of [Me₃SbM(CO)₅] [M = Cr (1), W (2)], [Me₃BiM(CO)₅] [M = Cr (3), W (4)], cis-[(Me₃Sb)₂Mo(CO)₄] (5), [^tBu₃BiFe(CO)₄] (6), crystal structures of 1-6 and DFT studies of 1-4 are reported.     

Assembly molecular architectures based on structural variation of metalloligand [Cu(PySal)2] (PySal = 3-pyridylmethylsalicylideneimino)

A versatile neutral metalloligand [Cu(PySal)₂] (1) (PySal = 3-pyridylmethylsalicylidene-imino) was exploited as a building unit to construct five complexes {Cu[Cu(PySal)₂]₂}(ClO₄)₂ (2), {Cd[Cu(PySal)₂]₂(H₂O)₂]} (NO₃)₂ · 2H₂O · 4CH₃OH (3), {Zn[μ₂-Cu(PySal)₂]Cl₂}_n · nCH₃OH (4), {Hg[μ₂-Cu(PySal)₂]I₂}_n (5) and {Cd[μ₂-Cu(PySal)₂]Cl₂}_n · nCH₂Cl₂ (6). [Cu(PySal)₂] acts as a chelating ligand in discrete complexes 2 and 3 with unbound anions, but as a bis-monodentate bridging ligand in polymers 4, 5 and 6 when halogen anions coordinated cooperatively to metal cations. The coordination geometry of Cu²⁺ is well-defined square planar in bridging [Cu(PySal)₂], analogous to that in free metalloligand (1), but it is distorted square planar in chelating [Cu(PySal)₂].     

Hetero-metallic frameworks of [Pd(CN)4] and Cu(II) with triamines: A rare example of a tetracyanometallate bridged 2D coordination polymer

Four cyano bridged Cu(II)–Pd(II) heterometallic complexes, [Cu(dpt)Pd(CN)₄]_n (1), {[Cu₂(medpt)₂Pd(CN)₄](ClO₄)₂ · 3H₂O}_n (2), {[Cu₂(dien)₂Pd(CN)₄](ClO₄)₂ · 2CH₃OH}_n (3) and {[Cu₂(iPrdien)₂Pd(CN)₄](ClO₄)₂ · 2H₂O}_n (4) [dpt = 3,3′-iminobispropylamine; medpt = 3,3′-diamino-N-methyldipropylamine; dien = diethylenetriamine and iprdien = N′-isopropyldiethylenetriamine] have been synthesized and characterized by single crystal X-ray diffraction analysis, magnetic measurement and thermal study. Complexes 1, 2 and 3 are 1D coordination polymers, while 4 presents a 2D network. In 1, the cis-directed cyanide ligands of [Pd(CN)₄]²⁻ anions link two Cu(dpt) units to form a neutral coordination polymer, whereas in 2, 3 and 4, all the cyanide groups of [Pd(CN)₄]²⁻ take part in bonding with four adjacent Cu(II) ions, resulting in cationic coordination polymers counterbalanced by perchlorate anions. The structures are compared with those of analogous [Ni(CN)₄]²⁻ derivatives. The magnetic behavior shows antiferromagnetic interactions in all the complexes.     

New Cu(II)4 and Zn(II)4 complexes: Synthesis, characterization and magnetic and biological studies

Two new isomorphous tetranuclear complexes [Cu₄L₂(4,4′-bipy)₂]·(ClO₄)₄·2CH₃CN·2H₂O (1) and [Zn₄L₂(4,4′-bipy)₂]·(ClO₄)₃·CH₃O·4H₂O (2) have been obtained and fully characterized (where bipy = bipyridine, H₂L = macrocycle is the [2+2] condensation product of 2,6-diformyl-4-fluoro-phenol and 1,4-diaminobutane). They exhibit wheel-like configuration in which two 4,4′-bipy molecules connect two dinuclear [M₂L]²⁺ units. The interactions of the complexes with calf thymus DNA were studied by UV-Vis and CD spectroscopic techniques. The binding constants of 1 and 2 are 2.27 × 10⁶ and 3.89 × 10⁵ M⁻¹, respectively. The magnetic measurement of 1 reveals that there are strong antiferromagnetic coupling (J = -272.6 cm⁻¹) between two Cu(II) ions in the macrocyclic unit and ferromagnetic interaction (j′ = 41.7) between the Cu(II) ions in two adjacent macrocyclic units. Furthermore, the cyclic voltammogram of 1 shows that it undergoes two quasi-reversible processes with the half wave potentials -0.232 and -0.606 V, respectively.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Polymorphism in [Co(SCN)4(ppz-H)2] (ppz,piperazine)

A one-pot reaction of [Co(NO₃)₂ · 6H₂O and piperazine] with NH₄SCN/NaSCN in water–methanol (1:1) solvent leads to two polymorphs of [Co(SCN)₄(ppz-H)₂] (ppz, piperazine) (I and II). X-ray crystal structure reveals both have same space group but the differences in the alignment of pendant SCN⁻ leads to two polymorphs. In I, trifurcated N–H?S hydrogen bonding plays a prominent role in crystal packing leading to S?S interactions between SCN fragments but in II, no such trifurcation arises and thereby the crystal packing occurs through hydrogen bonding interactions only leading to a distinctly different network topology. TG/DSC and FT-IR study reveal they are enantiotropically related.     

Mononuclear Fe(III) and tetranuclear [Fe(III)Gd(III)]2 complexes with a Schiff-base ligand derived from the o-vanillin: Synthesis, crystal structures and magnetic properties

The mononuclear high-spin iron(III) complexes [Fe(3-MeOsalpn)Cl(H₂O)] (1) and [Fe(3-MeOsalpn)(NCS)(H₂O)]·0.5CH₃CN (2) and the tetranuclear oxo-bridged compound [{Fe(3-MeOsalpn)Gd(NO₃)₃}₂(μ-O)]·CH₃CN (3) [3-MeOsalpn²⁻ = N,N′-propylenebis(3-methoxysalicylideneiminate)] have been prepared and magneto-structurally characterised. The iron(III) ion in 1 and 2 is six-coordinated in a somewhat distorted octahedral surrounding with the two phenolate-oxygens and two imine-nitrogens from the Schiff-base building the equatorial plane and a water (1 and 2) and a chloro (1)/thiocyanate-nitrogen (2) in the axial positions. The neutral mononuclear units of 1 and 2 are assembled into centrosymmetric dinuclear motifs through hydrogen bonds between the axially coordinated water molecule of one iron centre and methoxy-oxygen atoms from the Schiff-base of the adjacent iron atom. The values of the intradimer metal-metal distance within the supramolecular dimers are 4.930 (1) and 4.878 Å (2). The tetranuclear of 3 can be described as two {Fe^III(3-MeOsalpn)} units connected through an oxo-bridge, each one hosting a [Gd^III(NO₃)₃] entity in the outer cavity defined by the two phenolate- and two methoxy-oxygen atoms. The values of the intramolecular Fe?Fe and Fe?Gd distances in 3 are 3.502 and 3.606 Å, respectively. The analysis of the magnetic data of 1-3 in the temperature range 1.9-300 K shows the occurrence of weak intermolecular antiferromagnetic interactions in 1 and 2 [J = −0.76 (1) and −0.75 cm⁻¹ (2) with the Hamiltonian defined as H = −JS_Fe1·S_Fe1] whereas two intramolecular antiferromagnetic interactions coexist in 3, one very strong between the two iron(III) ions (J₁) through the oxo bridge and the other much weaker between the iron(III) and the Gd(III) ions (J₂) across the double phenoxo oxygens [J₁ = −275 cm⁻¹ and J₂ = −3.25 cm⁻¹, the Hamiltonian being defined as H=-J₁S_Fe1·S_Fe1^′-J₂(S_Fe1·S_Gd1+S_Fe1^′·S_Gd1^′)]. These values are analysed in the light of the structural data and compared with those of related systems.     

Mixed-metal single-molecule magnets: Syntheses, structure, and magnetic properties of [Mn8Fe4O12(O2CR)16(H2O)4] (R = CH2Cl, CH2Br, CHCl2)

Three mixed-metal single-molecule magnets containing [Mn₈Fe₄O₁₂]¹⁶⁺ cores are synthesized and characterized. The reaction of FeCl₂·4H₂O with KMnO₄ and RCOOH (R = CH₂Cl, CH₂Br) in H₂O gives [Mn₈Fe₄O₁₂(O₂CR)₁₆(H₂O)₄] (R = CH₂Cl (1), CH₂Br (2)) in yields of 43% and 40%, respectively. Treatment of complex 1 with an excess of CHCl₂COOH in CH₂Cl₂ gives [Mn₈Fe₄O₁₂(O₂CCHCl₂)₁₆(H₂O)₄]·CH₂Cl₂·10H₂O (3·CH₂Cl₂·10H₂O) in a yield of 83%. The X-ray structure analysis reveals that all three complexes consist of a trapped-valence dodecanuclear core comprising 4Mn^III, 4Fe^III, and 4Mn^IV ions. DC magnetic susceptibility and magnetization measurements indicate that all three complexes exhibit intramolecular antiferromagnetic interaction, resulting in an S = 4 ground state. In addition, frequency-dependent out-of-phase AC magnetic susceptibility signals at low temperature for complexes 1, 2, and 3 are indicative of their single-molecule magnetism behavior.     

Solvothermal synthesis and crystal structure of Sb(III) and Sb(V) thioantimonates: [Mn(en)3]2Sb2S5 and [Ni(en)3(Hen)]SbS4

Thioantimonate compounds of [Mn(en)₃]₂Sb₂S₅ (1) and [Ni(en)₃(Hen)]SbS₄ (2) (en=ethylenediamine) were prepared by reaction of transition metal chloride with Sb and S₈ powders under solvothermal conditions. Compound 1 consists of discrete [Sb₂S₅]⁴⁻ anion, which is formed by corner-sharing SbS₃ trigonal pyramids. Compound 2 is composed of discrete tetrahedral [SbS₄]³⁻ anion. The compounds 1 and 2 are charge compensated by [M(en)₃]²⁺ cations, whereas in the crystal of 2 there is another counter ion of [Hen]⁺. The results of the synthesis suggest that the temperature, the concentration and the existing states of the starting materials and so on are important for the structure and composition of the final products. In addition, the oxidation-state of antimony might be related to the molar ratio of the reactants. Excess amount of elemental S is beneficial to the higher oxidation-state of thioantimonate (V). Compound 1 decomposes from 150°C to 350°C, while compound 2 decomposes from 200°C to 350°C remaining Sb₂S₃ and NiSbS as residues.     

New effective reagent [Cp2ZrH2 · ClAlEt2]2 for alkene hydrometallation

New bimetallic complex [Cp₂ZrH₂ · ClAlEt₂]₂ (1) was synthesized, and its reactivity in hydrometallation reaction with the following alkenes was studied: hept-1-ene, okt-1-ene, α-methylstyrene, (1S)-β-pinene, (+)-camphene. Complex 1 shows the highest reactivity among the other known Al,Zr-bimetallic complexes: [Cp₂ZrH₂ · ClAlBuⁱ₂]₂ (2), [Cp₂ZrH₂ · AlEt₃]₂ (3), [Cp₂ZrH₂ · AlBuⁱ₃]₂ (4) and [Cp₂ZrH₂ · HAlBuⁱ₂] (5) as well as organoaluminium compounds (OAC): ⁱBu₂AlH, ⁱBu₃Al and ⁱBu₂AlCl in presence of Zr catalysts. Chlorine containing complexes 1 and 2 appear to be more effective in alkene hydrometallation, and relative hydrometallation rates are (1S)-β-pinene ? (+)-camphene < α-methylstyrene < oct-1-ene < hept-1-ene. Hydrometallation of (1S)-β-pinene and its subsequent oxidation with I₂ run with high diastereoselectivity and yield trans-myrtanol. However, the diastereoselectivity of (+)-camphene hydrometallation is less than that for (1S)-β-pinene, and the reaction gives predominately endo-camphanol.     

Synthesis and characterisation of [AlMen{Si(SiMe3)3}3−n(thf)] (n = 1 or 2)

The crystalline compounds [AlMe_n{Si(SiMe₃)₃}_3−n(thf)] [n = 2 (1) or 1 (2)] were prepared from the lithium sisyl [Li{Si(SiMe₃)₃}(thf)₃] (A) and the appropriate methylaluminium chloride [AlCl_3−nMe_n] in thf. The X-ray structure of 1 is reported. Unlike A or a magnesium sisyl [Mg{Si(SiMe₃)₃}₂(thf)₂] (B), neither 1 nor 2 underwent an insertion reaction with an α-H-free nitrile.     

4,5-Bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R3Sn)2(dmit), 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R3Sn)2(dmio), compounds: Crystal structures of (cyclohexyl3Sn)2(dmio), (Ph3Sn)2(dmit) and (Ph3Sn)2(dmio)

The synthesis and crystal structures of 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-thione, (R₃Sn)₂(dmit), 1, and 4,5-bis[(triorganotin)thiolato]-1,3-dithiole-2-one, (R₃Sn)₂(dmio), 2, compounds are reported. Compounds, (1 or 2: R = Ph or cyclohexyl, Cy), have been obtained from reaction of R₃SnCl with Cs₂dmit or Na₂dmio. The presence of the two tin centres in (2: R = Ph) is shown in the ¹³C NMR spectrum by the couplings of both Sn atoms to the dmio olefinic carbons with J values of 29.4 and 24.7 Hz. The δ¹¹⁹ Sn values for (1: R = Ph) and (2: R = Ph) differ by about 30 ppm, values being −20.7 and −50.1 ppm, respectively, in CDCl₃ solution. X-ray structure determinations for (1: R = Ph) and (2: R = Ph or Cy) reveal the compounds to have 4-coordinate, distorted tetrahedral tin centres. The dithiolato ligands, dmit and dmio, act as bridging ligands, in contrast to their chelating roles in R₂Sn(dmit) and R₂Sn(dmio). A further difference between R₂Sn(dmit) and R₂Sn(dmio), on one hand, and 1 and 2 on the other, is that intermolecular Sn-S and Sn-O interactions are absent in 1 and 2. However, weak intermolecular hydrogen bonding interactions are found in (1: R = Ph) [C-H?π] and in (2: R = Ph) [C-H?π and C-H?O].