Engineering Platinum–Oxygen Dual Catalytic Sites via Charge Transfer towards Highly Efficient Hydrogen Evolution

A dual‐site catalyst allows for a synergetic reaction in the close proximity to enhance catalysis. It is highly desirable to create dual‐site interfaces in single‐atom system to maximize the effect. Herein, we report a cation‐deficient electrostatic anchorage route to fabricate an atomically dispersed platinum–titania catalyst (Pt₁^O1/Ti_1?xO₂), which shows greatly enhanced hydrogen evolution activity, surpassing that of the commercial Pt/C catalyst in mass by a factor of 53.2. Operando techniques and density functional calculations reveal that Pt₁^O1/Ti_1?xO₂ experiences a Pt?O dual‐site catalytic pathway, where the inherent charge transfer within the dual sites encourages the jointly coupling protons and plays the key role during the Volmer–Tafel process. There is almost no decay in the activity of Pt₁^O1/Ti_1?xO₂ over 300 000 cycles, meaning 30 times of enhancement in stability compared to the commercial Pt/C catalysts (10 000 cycles).     

Effect of Li2O Addition on the Preparation of (Y2‐yLiy)Ti2O7‐y

A new series of (Y_2‐yLi_y)Ti₂O_7‐y having an ordered pyrochlore phase was prepared by a solid state reaction method with a solid solution range of 0.05 ≥ y ≥ 0.10. Unit cell parameters obtained by the Rietveld refinement method shows that the a‐axis decreases linearly with increasing the amount of Li ion addition, indicating the successful incorporation of the Li ion into unit cell. The average x‐fractional coordinate of the O(1) site depends on the ionic radius ratio of r(A³+)/r(Ti⁴⁺) in the A₂Ti₂O₇ with a pyrochlore phase. The Ti K‐edge XANES spectra of the (Y_2‐yLi_y)Ti₂O_7‐y show that the valence of the Ti ions is slightly less than 4 so that Ti is in the mixed valence state. Average particle size increases with increasing the amount of extra Li ion addition, which acts as a flux to lower the melting point of the materials.     

Synthesis and photocatalytic activity of Ti[1 ? x]VxO[2 ? y]Cy whiskers in hydroquinone oxidation in aqueous solutions

Ti_1−x V _x O_2−y C _y (0 ≤ x ≤ 0.10 and x = 0.50) whiskers having the anatase structure were synthesized via thermolysis of vanadium-doped titanium glycolate of composition Ti_1−x V _x (OCH₂CH₂O)₂ (0 ≤ x ≤ 0.10 and x = 0.50). The starting reagents used to prepare Ti_1−x V _x (OCH₂CH₂O)₂ were mixtures of coprecipitated titanium and vanadyl hydroxides, which were heated in ethylene glycol at T ≤ 200°C: (1 − x)TiO(OH)₂ + xVO(OH)₂ + 2HOCH₂CH₂OH = Ti_1−x V _x (OCH₂CH₂O)₂ + 3H₂O↑. Thermolysis of vanadium-doped titanium glycolate in various gas media over a wide range of temperatures is useful to prepare titania samples doped with both vanadium and carbon to form a phase of the general composition Ti_{1 − x} V _x O_{2 − y} C _y whiskers prepared by thermolyzing Ti_{1 − x} V _x (OCH₂CH₂O)₂ in air at 450°C were found to have a high photocatalytic activity in hydroquinone oxidation in aqueous solutions irradiated in the UV spectral range; the photocatalyst’s activity increases with increasing vanadium concentration. When hydroquinone was irradiated in the blue, the maximal catalytic activity was discovered in a sample of composition Ti_0.50V_0.50O_2−y C _y . Quantum-chemical calculations support experimental data that the double doping of titania (Ti_1−x V _x O_2−y C _y ) enhances its photocatalytic activity compared to undoped anatase or anatase doped in one sublattice: Ti_1−x V _x O₂ and TiO_2−y C _y .     

Glycolate Ti1 − x Fe x (OCH2CH2O)2 − x/2 as a precursor for the preparation of quasi-one-dimensional (1D) solid solutions Ti1 − x Fe x O2 − 2x/2 (0 ≤ x ≤ 0.1)

Quasi-one-dimensional (1D) solid solutions Ti_{1 ? x} Fe _x (OCH₂CH₂O)_{2 ? x/2} (0 < x ≤ 0.1) with the structure of anatase were prepared by heating the glycolate Ti_{1 ? x} Fe _x (OCH₂CH₂O)_{2 ? x/2} in an atmosphere of air at a temperature of >450°C. The conditions of formation and the properties of the new glycolate Ti₃Fe₂(OCH₂CH₂O)₉ were described. It was found that the synthesized Ti_{1 ? x} Fe _x O_{2 ? 2x/2} solid solutions exhibit photocatalytic activity in the reaction of hydroquinone oxidation in an aqueous solution on irradiation with UV light. A correlation between the rate of oxidation of hydroquinone and the concentration of iron in the catalyst was established. A procedure for the preparation of titanium dioxide with the structure of anatase doped with iron and carbon (Ti_{1 ? x} Fe _x O_{(2 ? x/2) ? yCy)} and also composites on its basis, which contain an excess amount of carbon, was proposed.     

Magneli phase Ti n O2n − 1 as corrosion-resistant PEM fuel cell catalyst support

Magneli phase titanium suboxide, Ti _n O_{2n ? 1}, with Brunauer–Emmett–Teller surface area up to 25 m² g^?1 was prepared using the heat treatment of titanium oxide (rutile) mixed with polyvinyl alcohol in ratios from 1:3 to 3:1. XRD patterns showed Ti₄O₇ as the major phase formed during the heat treatment process. The Ti _n O_{2n ? 1} showed excellent electrochemical stability in the potential range of ?0.25 to 2.75 V vs. standard hydrogen electrode. The Ti _n O_{2n ? 1} was employed as a polymer electrolyte membrane fuel cell catalyst support to prepare 20 wt% platinum (Pt)/Ti _n O_{2n ? 1} catalyst. A fuel cell membrane electrode assembly was fabricated using the 20 wt% Pt/Ti _n O_{2n ? 1} catalyst, and its performance was evaluated using H₂/O₂ at 80 °C. A current density of 0.125 A?cm^?2 at 0.6 V was obtained at 80 °C.     

Regions of stability of variable-composition perovskite phases La1?xSrxMn1?yMyO3 (M = Ti, Ni)

The formation of the orthorhombic solid solution series LaMn_1−y Ti _y O₃ with 0.0 ≤ y ≤ 0.15 and LaMn_1−y Ni _y O₃ with 0.0 ≤ y ≤ 0.4 was observed. The stability boundaries of the La_1−x Sr _x Mn_1−y M _y O₃ (M = Ti, Ni) perovskite phases were determined. Fragments of isobaric-isothermal sections of the phase diagrams of the La₂O₃-SrO-Mn₃O₄-TiO₂ and La₂O₃-SrO-Mn₃O₄-NiO systems in air at 1100°C were suggested. Original Russian Text ? E.A. Filonova, A.N. Demina, A.N. Petrov, 2007, published in Zhurnal Fizicheskoi Khimii, 2007, Vol. 81, No. 10, pp. 1787–1790.     

Novel KF-TiO2catalysts for oxidative dehydrogenation of isobutane

A novel type of catalysts, KF-TiO₂, efficient for the oxidative dehydrogenation (ODH) of isobutane is presented. The effect of KF content and calcination temperature was studied. In the reaction conditions explored, the best performance (73 % selectivity to isobutene at 10.5 % conversion of isobutane) was observed over a catalyst with KF/TiO₂ = 0.2 (mol/mol). The surface properties of the catalysts were investigated by SPS (Surface Photo-voltage Spectroscopy) and XPS. The promotion effect of KF in the catalysts can be attributed to the formation of an oxyfluoro-compound, K₂Ti₄O₈F₂.     

Enhanced Electrocatalytic N2 Reduction via Partial Anion Substitution in Titanium Oxide–Carbon Composites

The electrochemical conversion of N₂ at ambient conditions using renewably generated electricity is an attractive approach for sustainable ammonia (NH₃) production. Considering the chemical inertness of N₂, rational design of efficient and stable catalysts is required. Therefore, in this work, it is demonstrated that a C‐doped TiO₂/C (C‐Ti_xO_y/C) material derived from the metal–organic framework (MOF) MIL‐125(Ti) can achieve a high Faradaic efficiency (FE) of 17.8 %, which even surpasses most of the established noble metal‐based catalysts. On the basis of the experimental results and theoretical calculations, the remarkable properties of the catalysts can be attributed to the doping of carbon atoms into oxygen vacancies (OVs) and the formation of Ti?C bonds in C‐Ti_xO_y. This binding motive is found to be energetically more favorable for N₂ activation compared to the non‐substituted OVs in TiO₂. This work elucidates that electrochemical N₂ reduction reaction (NRR) performance can be largely improved by creating catalytically active centers through rational substitution of anions into metal oxides.     

Zr0.5Ti0.5O2的添加对超临界裂解RP-3催化剂性能的影响

采用共沉淀法制备了Zr_0.5Ti_0.5O₂载体材料,将其掺杂在CeO₂-Al₂O₃ (CA)基催化剂中, 并对其催化活性进行了超临界裂解测试, 采用全自动吸附仪、X射线衍射(XRD)、透射电镜(TEM)、程序升温脱附(TPD)等方法对催化剂进行了表征. 实验结果表明, 催化剂能够明显降低裂解反应的温度, 600 ℃ CA基催化剂产气率是热裂解的2.8倍, 掺杂Zr_0.5Ti_0.5O₂载体材料的CA基催化剂是热裂解的4.0倍, 650 ℃时, 掺杂Zr_0.5Ti_0.5O₂载体材料的CA基催化剂热沉提高了0.55 MJ·kg^-1. BET结果表明, 掺杂Zr_0.5Ti_0.5O₂载体后催化剂出现双孔结构, 部分小孔的出现使得乙烯的选择性提高; NH₃-TPD结果表明, 掺杂Zr_0.5Ti_0.5O₂载体材料后, 催化剂强酸位的酸量增加了4.0倍,催化剂表现出更强的表面酸性和更集中的强酸酸中心密度, 有利于裂解多产烯烃.     

Absorption Spectra of CrIII in some lattices of spinel and pseudo-brookite Type

Spinel mixed crystals ZnCr_xAl_2?xO₄, Cd_yZn_1?yCrAlO₄, Cd_0.5Zn_0.5Cr_0.4Ga_1.6O₄ and pseudo-brookite compounds Al_2?xGe_yCr_xTi_1?yO₅ were synthesized and x-rayed. The reflectance spectra were measured. The Δ-dependent absorption band was shifted towards IR-region in case of the spinels, whereas it remains nearly unshifted in pseudo-brookite. Generally, the results are discussed with the help of the ligand field parameters Δ and B.     

Synthesis and spectral properties of titanium(iv) polynuclear hydroxo complexes stabilized in solution by the [PW11O39]7− heteropolyanion

Unsaturated heteropolyanions (HPA) [PW₁₁O₃₉]⁷⁻ stabilize Ti^IV hydroxo complexes in aqueous solutions (Ti: PW₁₁ [PW₁₁O₃₉]⁷⁻⪯12, pH 1–3). Spectral studies (optical,¹⁷O and³¹P NMR, and IR spectra) and studies by the differential dissolution method demonstrated that Ti^IV hydroxo complexes are stabilized through interactions of polynuclear Ti^IV hydroxo cations with heteropolyanions [PW₁₁TiO₄₀ ⁵⁻ formed. Depending on the reaction conditions, hydroxo cations Ti _n−1O _x H _y ^m+ either add to oxygen atoms of the W−O−Ti bridges of the heteropolyanions to form the complex [PW₁₁TiO₄₀·Ti _n−1O _x H _y ] ^k− (at [HPA]=0.01 mol L⁻¹) or interact with Ti^IV of the heteropolyanions through the terminal o atom to give the polynuclear complexes [PW₁₁O₃₉Ti−O−Ti _n−1O _x H _y ]^q− (at [HPA]=0.2 mol L⁻¹). When the complexes of the first type were treated with H₂O₂, Ti^IV ions added peroxo groups. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 914–920, May, 1997.     

Luminescent and structural properties of the series Ba6−xEuxTi2+xTa8−xO30 and Ba4−yKyEu2Ti4−yTa6+yO30

The series Ba_6−xEu_xTi_2+xTa_8−xO₃₀ and Ba_4−yK_yEu₂Ti_4−yTa_6+yO₃₀ have been synthesized at 1400°C in air. They exhibit efficient excitation at about 400 nm and typical emission of Eu³⁺ at about 580-620 nm, form solid solutions within 0.0?x?2.0 and 0?y?4 respectively, and crystallized in P4/mbm at room temperature with Eu atoms occupied at centrosymmetric site (0, 0, 0). Their conductivity is very low (2.8×10⁻⁶ Ω⁻¹ cm⁻¹ at 740°C for Ba₆Ti₂Ta₈O₃₀).     

Gas‐Phase Reaction of CeV2O7+ with C2H4: Activation of CC and CH Bonds

The reactivity of metal oxide clusters toward hydrocarbon molecules can be changed, tuned, or controlled by doping. Cerium‐doped vanadium cluster cations CeV₂O₇⁺ are generated by laser ablation, mass‐selected by a quadrupole mass filter, and then reacted with C₂H₄ in a linear ion trap reactor. The reaction is characterized by a reflectron time‐of‐flight mass spectrometer. Three types of reaction channels are observed: 1) single oxygen‐atom transfer , 2) double oxygen‐atom transfer , and 3) C?C bond cleavage. This study provides the first bimetallic oxide cluster ion, CeV₂O₇⁺, which gives rise to C?C bond cleavage of ethene. Neither Ce_xO_y^± nor V_xO_y^± alone possess the necessary topological and electronic properties to bring about such a reaction.     

Theoretical study on the interaction of neutral and charged Tin (n = 1–7) clusters with one oxygen molecule

The interactions between the neutral and charged (?2, ?1, +1, and +2) Ti_n (n = 1–7) clusters and one O₂ molecule were investigated by density functional theory. The calculated results show that the oxygen molecule is dissociative on the neutral Ti_n clusters. Geometrically, the two O atoms are distributed at the two sides across the neutral Ti_n cluster for n = 1–4 and the oxygen atom favors the three‐fold hollow site for n = 5, 6, and 7. The binding energy per atom (E_b) and energy gap (E_gap) show higher stability and lower chemical activity of the neutral Ti_nO₂ (n = 1–7) systems compared with the corresponding Ti_n clusters. The adsorption energies (E_ad) exhibit a continuously ascending tendency except for n = 4. The results of the addition of different charges (?2, ?1, +1, and +2) on the most stable neutral Ti_nO₂ (n = 1–7) systems indicate that their geometries are usually perturbed. The stabilities of the neutral Ti_nO₂ systems are enhanced by adding one negative charge. The strongest interaction of the charged Ti_n clusters (?2, ?1, +1, and +2) with O₂ molecule is found at charge +2. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Three-step macrokinetic model of butane and propane steam conversion to methane-rich gas

Low-temperature steam conversion (LTSC) of a methane-butane mixture (95% methane and 5% butane) into a methane-rich gas over an industrial Ni-based catalyst has been studied with the following reaction conditions: temperature 200–320°C, pressure 1 bar, gas hour space velocity 1200–3600 h^–1, and steam to carbon ratio 0.64. A three-step macrokinetic model has been suggested based on the kinetic parameters found. The model includes the following reactions: (1) irreversible steam reforming; (2) CO₂ methanation, which occurs in a quasi-equilibrium mode at temperatures above 260°C; (3) hydrogenolysis of propane and butane, which is essential at temperatures below 260°C. Steam reforming was shown to limit the overall reaction rate, whereas hydrogenolysis and CO₂ methanation determined the product distribution in low- and high-temperature regions, respectively. Temperature dependencies of the product distribution for the LTSC of a model ternary methane-propane-butane mixture (85% methane, 10% propane, and 5% butane) have been successfully simulated using the three-step model suggested.     

Engineering Platinum–Oxygen Dual Catalytic Sites via Charge Transfer towards Highly Efficient Hydrogen Evolution

A dual-site catalyst allows for a synergetic reaction in the close proximity to enhance catalysis. It is highly desirable to create dual-site interfaces in single-atom system to maximize the effect. Herein, we report a cation-deficient electrostatic anchorage route to fabricate an atomically dispersed platinum–titania catalyst (Pt₁^O1/Ti_1−xO₂), which shows greatly enhanced hydrogen evolution activity, surpassing that of the commercial Pt/C catalyst in mass by a factor of 53.2. Operando techniques and density functional calculations reveal that Pt₁^O1/Ti_1−xO₂ experiences a Pt−O dual-site catalytic pathway, where the inherent charge transfer within the dual sites encourages the jointly coupling protons and plays the key role during the Volmer–Tafel process. There is almost no decay in the activity of Pt₁^O1/Ti_1−xO₂ over 300 000 cycles, meaning 30 times of enhancement in stability compared to the commercial Pt/C catalysts (10 000 cycles).     

Physicochemical characteristic of neodymium oxide-based catalyst for in-situ CO2/H2 methanation reaction

Carbon dioxide emission to the atmosphere is worsened as all the industries emit greenhouse gases (GHGs) to the atmosphere, particularly from refinery industries. The catalytic chemical conversion through methanation reaction is the most promising technology to convert this harmful CO₂ gas to wealth CH₄ gas for the combustion. Thus, supported neodymium oxide based catalyst doped with manganese and ruthenium was prepared via wet impregnation route. The screening was initiated with a series of Nd/Al₂O₃ catalysts calcined at 400?°C followed by optimization with respect to calcination temperatures, based ratios loading and various Ru loading. The Ru/Mn/Nd (5:20:75)/Al₂O₃ calcined at 1000?°C was the potential catalyst, attaining a complete CO₂ conversion and forming 40% of CH₄ at 400?°C reaction temperature. XRD results revealed an amorphous phase with the occurrence of active species of RuO₂, MnO_2, and Nd₂O₃, and the mass ratio of Mn was the highest among other active species as confirmed by EDX. The ESR resulted in the paramagnetic of Nd³⁺ at the g value of 2.348. Meanwhile nitrogen adsorption (NA) analysis showed the Type IV isotherm which exhibited the mesoporous structure with H3 hysteresis of slit shape pores.     

Electrical, electrochemical, and thermomechanical properties of perovskite-type (La1?x Sr x )1?y Mn0.5Ti0.5O3?δ (x?=?0.15–0.75, y?=?0–0.05)

Strontium additions in (La_1?x Sr _x )_1?y Mn_0.5Ti_0.5O_3?δ (x?=?0.15–0.75, y?=?0–0.05) having a rhombohedrally distorted perovskite structure under oxidizing conditions lead to the unit cell volume contraction, whilst the total conductivity, thermal and chemical expansion, and steady-state oxygen permeation limited by surface exchange increase with increasing x. The oxygen partial pressure dependencies of the conductivity and Seebeck coefficient studied at 973–1223?K in the p(O₂) range from 10^?19 to 0.5?atm suggest a dominant role of electron hole hopping and relatively stable Mn³⁺ and Ti⁴⁺ states. Due to low oxygen nonstoichiometry essentially constant in oxidizing and moderately reducing environments and to strong coulombic interaction between Ti⁴⁺ cations and oxygen anions, the tracer diffusion coefficients measured by the ¹⁸O/¹⁶O isotopic exchange depth profile method with time-of-flight secondary-ion mass spectrometric analysis are lower compared to lanthanum–strontium manganites. The average thermal expansion coefficients determined by controlled-atmosphere dilatometry vary in the range 9.8–15.0?×?10^?6?K^?1 at 300–1370?K and oxygen pressures from 10^?21 to 0.21?atm. The anodic overpotentials of porous La_0.5Sr_0.5Mn_0.5Ti_0.5O_3?δ electrodes with Ce_0.8Gd_0.2O_2-δ interlayers, applied onto LaGaO₃-based solid electrolyte, are lower compared to (La_0.75Sr_0.25)_0.95Cr_0.5Mn_0.5O_3?δ when no metallic current-collecting layers are introduced. However, the polarization resistance is still high, ~2 Ω?×?cm² in humidified 10?% H₂–90?% N₂ atmosphere at 1073?K, in correlation with relatively low electronic conduction and isotopic exchange rates. The presence of H₂S traces in H₂-containing gas mixtures did not result in detectable decomposition of the perovskite phases.     

Synthesis and characterization of A-site deficient rare-earth doped BaZrxTi1−xO3 perovskite-type compounds

A-site deficient rare-earth doped BaZr_xTi_1?xO₃ (BZT) ceramics were prepared from a soft-chemistry route and by solid-state reaction (SSR). Perovskite-like single-phase diagrams for the BaTiO₃–La_2/3TiO₃–BaZrO₃ system were constructed for each method of synthesis. Infrared spectroscopy on (Ba_1?yLa_2y/3)Zr_xTi_1?xO₃ solid solution revealed a dramatic stress on the M–O (M = Ti, Zr) bonds due to the combined effect of A-site vacancies and the lower ionic radius of La³⁺ than that of Ba²⁺. A relationship between the M–O stretching vibration (υ) and the tolerance factor (t) was determined. (Ba_1?yLn_2y/3)Zr_0.09Ti_0.91O₃ (Ln = La, Pr, Nd) samples synthesized by SSR were selected for detailed studies. X-ray diffraction data were refined by the Rietveld method. Scanning electron microscopy on sintered compacts detected abnormal crystal growth and grain sizes in the range of about 1 μm up to 10 μm when the dopant concentration is 6.7 at. %. Impedance measurements exhibited that ferroelectric to paraelectric phase-transition temperature shifted to lower values as increasing rare-earth content. (Ba_1?yLn_2y/3)Zr_0.09Ti_0.91O₃ system showed a diffuse phase transition with a relaxor-like ferroelectric behaviour. Furthermore, the dielectric constant was enhanced with respect to non-doped BZT system.     

Nitridated mesoporous Li4Ti5O12 spheres for high-rate lithium-ion batteries anode material

Nitridated mesoporous Li₄Ti₅O₁₂ spheres were synthesized by a simple ammonia treatment of Li₄Ti₅O₁₂ derived from mesoporous TiO₂ particles and lithium acetate dihydrate via a solid state reaction in the presence of polyethylene glycol 20000. The carbonization of polyethylene glycol could effectively restrict the growth of primary particles, which was favorable for lithium ions diffusing into the nanosized TiO₂ lattice during the solid state reaction to form a pure phase Li₄Ti₅O₁₂. After a subsequent thermal nitridation treatment, a high conductive thin TiO _x N _y layer was in situ constructed on the surface of the primary nanoparticles. As a result, the nitridated mesoporous Li₄Ti₅O₁₂ structure, possessing shorter lithium-ion diffusion path and better electrical conductivity, displays significantly improved rate capability. The discharge capacity reaches 138 mAh?g^?1 at 10 C rate and 120 mAh?g^?1 at 20 C rate in the voltage range of 1–3 V.