Vacancy‐Rich Monolayer BiO2−x as a Highly Efficient UV,Visible, and Near‐Infrared Responsive Photocatalyst

Vacancy‐rich layered materials with good electron‐transfer property are of great interest. Herein, a full‐spectrum responsive vacancy‐rich monolayer BiO_2−x has been synthesized. The increased density of states at the conduction band (CB) minimum in the monolayer BiO_2−x is responsible for the enhanced photon response and photo‐absorption, which were confirmed by UV/Vis‐NIR diffuse reflectance spectra (DRS) and photocurrent measurements. Compared to bulk BiO_2−x, monolayer BiO_2−x has exhibited enhanced photocatalytic performance for rhodamine B and phenol removal under UV, visible, and near‐infrared light (NIR) irradiation, which can be attributed to the vacancy V_Bi‐O′′′ as confirmed by the positron annihilation spectra. The presence of V_Bi‐O′′′ defects in monolayer BiO_2−x promoted the separation of electrons and holes. This finding provides an atomic level understanding for developing highly efficient UV, visible, and NIR light responsive photocatalysts.     

Room‐Temperature and Aqueous‐Phase Synthesis of Plasmonic Molybdenum Oxide Nanoparticles for Visible‐Light‐Enhanced Hydrogen Generation

A straightforward aqueous synthesis of MoO_3?x nanoparticles at room temperature was developed by using (NH₄)₆Mo₇O₂₄?4 H₂O and MoCl₅ as precursors in the absence of reductants, inert gas, and organic solvents. SEM and TEM images indicate the as‐prepared products are nanoparticles with diameters of 90–180 nm. The diffuse reflectance UV‐visible‐near‐IR spectra of the samples indicate localized surface plasmon resonance (LSPR) properties generated by the introduction of oxygen vacancies. Owing to its strong plasmonic absorption in the visible‐light and near‐infrared region, such nanostructures exhibit an enhancement of activity toward visible‐light catalytic hydrogen generation. MoO_3?x nanoparticles synthesized with a molar ratio of Mo^VI/Mo^V 1:1 show the highest yield of H₂ evolution. The cycling catalytic performance has been investigated to indicate the structural and chemical stability of the as‐prepared plasmonic MoO_3?x nanoparticles, which reveals its potential application in visible‐light catalytic hydrogen production.     

Unconventional Luminescent Centers in Metastable Phases Created by Topochemical Reduction Reactions

A low‐temperature topochemical reduction strategy is used herein to prepare unconventional phosphors with luminescence covering the biological and/or telecommunications optical windows. This approach is demonstrated by using Bi^III‐doped Y₂O₃ (Y_2?xBi_xO₃) as a model system. Experimental results suggest that topochemical treatment of Y_2?xBi_xO₃ using CaH₂ creates randomly distributed oxygen vacancies in the matrix, resulting in the change of the oxidation states of Bi to lower oxidation states. The change of the Bi coordination environments from the [BiO₆] octahedra in Y_2?xBi_xO₃ to the oxygen‐deficient [BiO_6?z] polyhedra in reduced phases leads to a shift of the emission maximum from the visible to the near‐infrared region. The generality of this approach was further demonstrated with other phosphors. Our findings suggest that this strategy can be used to explore Bi‐doped or other classes of luminescent systems, thus opening up new avenues to develop novel optical materials.     

Structural and Electrochemical Study of Vanadium‐Doped TiO2 Ramsdellite with Superior Lithium Storage Properties for Lithium‐Ion Batteries

Titanium‐oxide‐based materials are considered attractive and safe alternatives to carbonaceous anodes in Li‐ion batteries. In particular, the ramsdellite form TiO₂(R) is known for its superior lithium‐storage ability as the bulk material when compared with other titanates. In this work, we prepared V‐doped lithium titanate ramsdellites with the formula Li_0.5Ti_1?xV_xO₂ (0≤x≤0.5) by a conventional solid‐state reaction. The lithium‐free Ti_1?xV_xO₂ compounds, in which the ramsdellite framework remains virtually unaltered, are easily obtained by a simple aqueous oxidation/ion‐extraction process. Neutron powder diffraction is used to locate the Li channel site in Li_0.5Ti_1?xV_xO₂ compounds and to follow the lithium extraction by difference‐Fourier maps. Previously delithiated Ti_1?xV_xO₂ ramsdellites are able to insert up to 0.8 Li⁺ per transition‐metal atom. The initial gravimetric capacities of 270 mAh g^?1 with good cycle stability under constant current discharge conditions are among the highest reported for bulk TiO₂‐related intercalation compounds for the threshold of one e^? per formula unit.     

Controlling the Self‐Assembly of a Mixed‐Metal Mo/V–Selenite Family of Polyoxometalates

Five mixed‐metal mixed‐valence Mo/V polyoxoanions, templated by the pyramidal SeO₃^2? heteroanion have been isolated: K₁₀[Mo^VI₁₂V^V₁₀O₅₈(SeO₃)₈]?18 H₂O ( 1 ), K₇[Mo^VI₁₁V^V₅V^IV₂O₅₂(SeO₃)]?31 H₂O ( 2 ), (NH₄)₇K₃[Mo^VI₁₁V^V₅V^IV₂O₅₂(SeO₃)(Mo^V₆V^V‐ O₂₂)]?40 H₂O ( 3 ), (NH₄)₁₉K₃[Mo^VI₂₀V^V₁₂V^IV₄O₉₉(SeO₃)₁₀]?36 H₂O ( 4 ) and [Na₃(H₂O)₅{Mo_18?xV_xO₅₂(SeO₃)} {Mo_9?yV_yO₂₄(SeO₃)₄}] ( 5 ). All five compounds were characterised by single‐crystal X‐ray structure analysis, TGA, UV/Vis and FT‐IR spectroscopy, redox titrations, and elemental and flame atomic absorption spectroscopy (FAAS) analysis. X‐ray studies revealed two novel coordination modes for the selenite anion in compounds 1 and 4 showing η,μ and μ,μ coordination motifs. Compounds 1 and 2 were characterised in solution by using high‐resolution ESI‐MS. The ESI‐MS spectra of these compounds revealed characteristic patterns showing distribution envelopes corresponding to 2? and 3? anionic charge states. Also, the isolation of these compounds shows that it may be possible to direct the self‐assembly process of the mixed‐metal systems by controlling the interplay between the cation “shrink‐wrapping” effect, the non‐conventional geometry of the selenite anion and fine adjustment of the experimental variables. Also a detailed IR spectroscopic analysis unveiled a simple way to identify the type of coordination mode of the selenite anions present in POM‐based architectures.     

Identification of the Active Sites on Metallic MoO2−x Nano-Sea-Urchin for Atmospheric CO2 Photoreduction Under UV,Visible, and Near-Infrared Light Illumination

We report an oxygen vacancy (V_o)-rich metallic MoO_2−x nano-sea-urchin with partially occupied band, which exhibits super CO₂ (even directly from the air) photoreduction performance under UV, visible and near-infrared (NIR) light illumination. The V_o-rich MoO_2−x nano-sea-urchin displays a CH₄ evolution rate of 12.2 and 5.8 μmol g_catalyst⁻¹ h⁻¹ under full spectrum and NIR light illumination in concentrated CO₂, which is ca. 7- and 10-fold higher than the V_o-poor MoO_2−x, respectively. More interestingly, the as-developed V_o-rich MoO_2−x nano-sea-urchin can even reduce CO₂ directly from the air with a CO evolution rate of 6.5 μmol g_catalyst⁻¹ h⁻¹ under NIR light illumination. Experiments together with theoretical calculations demonstrate that the oxygen vacancy in MoO_2−x can facilitate CO₂ adsorption/activation to generate *COOH as well as the subsequent protonation of *CO towards the formation of CH₄ because of the formation of a highly stable Mo−C−O−Mo intermediate.     

Composition optimization and UV‐annealing dependence on the electrical properties of Hf1−xSixO2/Si gate stacks

Hf_1?xSi_xO₂ gate dielectrics grown by UV‐photo‐induced chemical vapor deposition (UV‐CVD) using Hf(OBu^t)₂(mmp)₂ and tetraethoxysilane as precursors have been deposited on Si substrate. Composition dependence of the interfacial microstructure of the Hf_1?xSi_xO₂/Si gate stacks has been investigated via Fourier transform infrared spectroscopy (FTIR) systematically. It has been indicated that the physical properties of the Hf_1?xSi_xO₂ films can be effectively optimized by adjusting the silicon contents incorporated in the films. In order to evaluate its potential implementation as an alternative dielectric in future devices, detailed electrical characterization of Au/Hf_1?xSi_xO₂/Si capacitor has been performed as functions of the silicon contents and the UV‐annealing time. Copyright © 2010 John Wiley & Sons, Ltd.     

Solid Solubility,Raman Spectra and Electrical Property of the Solid Solutions Ce1‐xNdxO2‐δ by Sol‐gel Route

Ce_1‐xNd_xO_2‐δ (x = 0.05–0.55) solid solutions prepared by sol‐gel route were crystallized in a cubic fluorite structure. The solid limit was determined to be as high as x = 0.45. Raman spectra of the solid solutions with lower composition exhibited only one band, which was assigned to F_2g mode. Increasing composition produced broad and asymmetric F_2g mode with an appearance of low frequency tail. The new broad peak observed at higher frequency side of the F_2g mode associated with the oxygen vacancy in the lattice. The impedance spectra of the solid solutions showed definitely ionic conduction, and Ce_0.80Nd_0.20O_2‐δ solid solution possessed a maximum conductivity. At 500 °C, the conductivity and activation energy were 2.65 × 10^?3S/cm and 0.82 eV, respectively.     

A Blinking Mesoporous TiO2−x Composed of Nanosized Anatase with Unusually Long‐Lived Trapped Charge Carriers

A mesoporous TiO_2?x material comprised of small, crystalline, vacancy‐rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer‐derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO_2?x. When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red‐shift in their UV/Vis absorption and long‐lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO₂ reduction.     

Electrochemically Generated γ‐LixV2O5 as Insertion Host for High‐Energy Li‐Ion Capacitors

In this study, we explored the feasibility of using electrochemically generated γ‐Li_xV₂O₅ as an insertion‐type anode in the lithium‐ion capacitor (LIC) with activated carbon (AC) as a cathode. Along with the native form of V₂O₅, their carbon composites are also used as the electrode material which is prepared by high‐energy ball milling. The electrochemical pre‐lithiation strategy is used to generate the desired γ‐phase of V₂O₅ (γ‐Li_xV₂O₅). Under the optimized mass loading conditions, the LICs are assembled with γ‐Li_xV₂O₅ as anode and AC as a cathode in the organic medium. Among the different LICs fabricated, AC/γ‐Li_xV₂O₅‐BM50 configuration delivered an energy density of 33.91 Wh kg^?1 @ 0.22 kW kg^?1 with excellent capacity retention characteristics. However, a dramatic increase in energy density (43.98 Wh kg^?1@0.28 kW kg^?1) is noted after the electrolyte modification with fluoroethylene carbonate. The high temperature performance of the assembled LIC is also studied and found that γ‐Li_xV₂O₅ phase can be used as a potential battery‐type component to construct high‐performance hybrid charge storage devices.     

Gas‐Phase Reactions of Cationic Vanadium‐Phosphorus Oxide Clusters with C2Hx (x=4, 6): A DFT‐Based Analysis of Reactivity Patterns

The reactivities of the adamantane‐like heteronuclear vanadium‐phosphorus oxygen cluster ions [V_xP_4?xO₁₀]^.+ (x=0, 2–4) towards hydrocarbons strongly depend on the V/P ratio of the clusters. Possible mechanisms for the gas‐phase reactions of these heteronuclear cations with ethene and ethane have been elucidated by means of DFT‐based calculations; homolytic C? H bond activation constitutes the initial step, and for all systems the P? O^. unit of the clusters serves as the reactive site. More complex oxidation processes, such as oxygen‐atom transfer to, or oxidative dehydrogenation of the hydrocarbons require the presence of a vanadium atom to provide the electronic prerequisites which are necessary to bring about the 2e^? reduction of the cationic clusters.     

Synthesis of Bi2WO6/Bi2O3 Composite with Enhanced Photocatalytic Activity by a Facile One‐step Hydrothermal Synthesis Route

In this study, the characterization and photocatalytic activity of Bi₂WO₆/Bi₂O₃ under visible‐light irradiation was investigated in detail. The results suggested that Bi₂WO₆/Bi₂O₃ can be synthesized by a facile one‐pot hydrothermal route using a super big 200 mL Teflon‐lined autoclave with optimal sodium oleate/Bi molar ratio of 1.25. Through the characterization of Bi₂WO₆/Bi₂O₃ by X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy, Fourier transform infrared, UV‐vis diffuse reflectance spectra and Photoluminescence spectra, it was found that the as‐prepared composite possessed smaller crystallite size and higher visible‐light responsive than the pure Bi₂WO₆. Moreover, it was expected that the as‐prepared composites exhibited enhanced photocatalytic activity for the degradation of Rhodamine B under visible‐light irradiation, which could be ascribed to their improved light absorption property and the reduced recombination of the photogenerated electrons and holes during the photocatalytic reaction. In general, this study could provide a principle method to synthesize Bi₂WO₆/Bi₂O₃ with enhanced photocatalytic activity by one‐step hydrothermal synthesis route for environmental purification.     

Highly Efficient Low‐Temperature Plasma‐Assisted Modification of TiO2 Nanosheets with Exposed {001} Facets for Enhanced Visible‐Light Photocatalytic Activity

Anatase TiO₂ nanosheets with exposed {001} facets have been controllably modified under non‐thermal dielectric barrier discharge (DBD) plasma with various working gas, including Ar, H₂, and NH₃. The obtained TiO₂ nanosheets possess a unique crystalline core/amorphous shell structure (TiO₂@TiO_2?x), which exhibit the improved visible and near‐infrared light absorption. The types of dopants (oxygen vacancy/surface Ti³⁺/substituted N) in oxygen‐deficient TiO₂ can be tuned by controlling the working gases during plasma discharge. Both surface Ti³⁺ and substituted N were doped into the lattice of TiO₂ through NH₃ plasma discharge, whereas the oxygen vacancy or Ti³⁺ (along with the oxygen vacancy) was obtained after Ar or H₂ plasma treatment. The TiO₂@TiO_2?x from NH₃ plasma with a green color shows the highest photocatalytic activity under visible‐light irradiation compared with the products from Ar plasma or H₂ plasma due to the synergistic effect of reduction and simultaneous nitridation in the NH₃ plasma.     

Synthesis,Isolation, and Spectroscopic Characterization of Holmium‐Based Mixed‐Metal Nitride Clusterfullerenes: HoxSc3−xN@C80 (x=1, 2)

The synthesis, isolation and spectroscopic characterization of holmium‐based mixed metal nitride clusterfullerenes Ho_xSc_3?xN@C₈₀ (x=1, 2) are reported. Two isomers of Ho_xSc_3?xN@C₈₀ (x=1, 2) were synthesized by the reactive gas atmosphere method and isolated by multistep recycling HPLC. The isomeric structures of Ho_xSc_3?xN@C₈₀ (x=1, 2) were characterized by laser‐desorption time‐of‐flight (LD‐TOF) mass spectrometry and UV/Vis/NIR, FTIR and Raman spectroscopy. A comparative study of M_xSc_3?xN@C₈₀ (M=Gd, Dy, Lu, Ho) demonstrates the dependence of their electronic and vibrational properties on the encaged metal. Despite the distinct perturbation induced by 4f¹⁰ electrons, we report the first paramagnetic ¹³C NMR study on Ho_xSc_3?xN@C₈₀ (I; x=1, 2) and confirm I_h‐symmetric cage structure. A ⁴⁵Sc NMR study on HoSc₂N@C₈₀ (I, II) revealed a temperature‐dependent chemical shift in the temperature range of 268–308 K.     

Synthesis and Studies of the Visible‐Light Photocatalytic Properties of Near‐Monodisperse Bi‐Doped TiO2 Nanospheres

Near‐monodisperse Bi‐doped anatase TiO₂ nanospheres with almost uniform diameters in the range of 117 to 87 nm were prepared simply by introducing different amounts of bismuth nitrate pentahydrate into the reaction system and subsequent calcinations. X‐ray diffraction, UV‐visible diffuse reflectance spectra, and X‐ray photoelectron spectroscopy confirm that the doped ions substitute some of the lattice titanium atoms, and furthermore, Bi³⁺ and Bi⁴⁺ ions coexist. All the Bi‐doped TiO₂ samples show much better photocatalytic activity than pure TiO₂ in the degradation of rhodamine B (RhB) under the irradiation of visible light (λ>420 nm), and, interestingly, it was found that the degradation mechanism is different from the conventional one, which has already been reported elsewhere. The detailed mechanism is discussed in this article.     

Crystal structure of the thortveitite‐related M phase, (MnxZn1–x)2V2O7 (0.75 < x < 0.913): a combined synchrotron powder and single‐crystal X‐ray study

The determination of the crystal structure of the M phase, (Mn_xZn_1–x)₂V₂O₇ (0.75 < x < 0.913), in the pseudobinary Mn₂V₂O₇–Zn₂V₂O₇ system for x ≃ 0.8 shows that the previously published triclinic unit‐cell parameters for this thortveitite‐related phase do not describe a true lattice for this phase. Instead, single‐crystal X‐ray data and Rietveld refinement of synchrotron X‐ray powder data show that the M phase has a different triclinic structure in the space group P with Z = 2. As prior work has suggested, the crystal structure can be described as a distorted version of the thortveitite crystal structure of β‐Mn₂V₂O₇. A twofold superstructure in diffraction patterns of crystals of the M phase used for single‐crystal X‐ray diffraction work arises from twinning by reticular pseudomerohedry. This superstructure can be described as a commensurate modulation of a pseudo‐monoclinic basis structure closely related to the crystal structure of β‐Mn₂V₂O₇. In comparison with the distortions introduced when β‐Mn₂V₂O₇ transforms at low temperature to α‐Mn₂V₂O₇, the distortions which give rise to the M phase from the β‐Mn₂V₂O₇ prototype are noticeably less pronounced.     

A Mixed‐Valent Uranium Phosphonate Framework Containing UIV,UV, and UVI

It is shown that U^VO₂⁺ ions can reside at U^VIO₂²⁺ lattice sites during mild reduction and crystallization process under solvothermal conditions, yielding a complicated and rare mixed‐valent uranium phosphonate compound that simultaneously contains U^IV, U^V, and U^VI. The presence of uranium with three oxidation states was confirmed by various characterization techniques, including X‐ray crystallography, X‐ray photoelectron, electron paramagnetic resonance, FTIR, UV/Vis‐NIR absorption, and synchrotron radiation X‐ray absorption spectroscopy, and magnetism measurements.     

A new one‐dimensional strontium vanadium tellurite,Sr7V4Te12O41

Vanadium tellurites display a rich structural chemistry with interesting physical properties, such as second harmonic generation (SHG). Tellurites, i.e. Te⁴⁺O_x, are often observed in unusual structures and form various structural motifs, including isolated clusters, chains, layers, and three‐dimensional networks. Similarly, vanadates, i.e. V⁵⁺O_x, show rich structural features, such as VO₄ tetrahedra, VO₅ square pyramids or trigonal bipyramids, and VO₆ octahedra. Strontium vanadium tellurite, Sr₇V₄Te₁₂O₄₁, was obtained from the melt of the solid‐state reaction of SrTeO₄ and VO₂ in a sealed quartz tube as it cooled from 973 K. The crystal structure exhibits a one‐dimensional latticework along the a axis comprised of paired Sr₃Te₃O_x units, namely Sr₆Te₆O_2x+1, with corner‐shared TeO₄ polyhedra – and specifically the Te lone‐pair electrons – facing outward in the bc plane. The Sr₆Te₆O_2x+1 latticework is helical and is layered in the b‐axis direction against sheets of corner‐shared VO₄ tetrahedra, and is linked in the c‐axis direction via individual corner‐shared SrO₈ square prisms.     

Visible‐Light‐Activated C−C Bond Cleavage and Aerobic Oxidation of Benzyl Alcohols Employing BiMXO5 (M=Mg,Cd, Ni,Co, Pb,Ca and X=V,P)

The synthesis, structure, optical and photocatalytic studies of a family of compounds with the general formula, BiMXO₅; M=Mg, Cd, Ni, Co, Pb, Ca and X=V, P is presented. The compounds were prepared by regular solid‐state reaction of constituents in the temperature range of 720–810 °C for 24 h. The compounds were characterized by powder X‐ray diffraction (PXRD) methods. The Rietveld refinement of the PXRD patterns have been carried out to establish the structure. The optical absorption spectra along with the colors in daylight have been explained employing the allowed d‐d transition. In addition, the observed colors of some of the V⁵⁺ containing compounds were explained using metal‐to‐metal charge transfer (MMCT) from the partially filled transition‐metal 3d orbitals to the empty 3d orbitals of V⁵⁺ ions. The near IR (NIR) reflectivity studies indicate that many compounds exhibit good NIR reflectivity, suggesting that these compounds can be employed as ‘cool pigments’. The experimentally determined band gaps of the prepared compounds were found to be suitable to exploit them for visible light activated photocatalysis. Photocatalytic C?C bond cleavage of alkenes and aerobic oxidation of alcohols were investigated employing visible light, which gave good yields and selectivity. The present study clearly demonstrated the versatility of the Paganoite family of compounds (BiMXO₅) towards new colored inorganic materials, visible‐light photocatalysts and ‘cool pigments’.     

A new linear bismuth coordination polymer based on 1,10‐phenanthroline‐2,9‐dicarboxylic acid: ionothermal synthesis,crystal structure and fluorescence properties

A new linear bismuth(III) coordination polymer, catena‐poly[[chloridobismuth(III)]‐μ₃‐1,10‐phenanthroline‐2,9‐dicarboxylato‐κ⁶O²:O²,N¹,N¹⁰,O⁹:O⁹], [Bi(C₁₄H₆N₂O₄)Cl]_n, has been obtained by an ionothermal method and characterized by elemental analysis, energy‐dispersive X‐ray spectroscopy, IR spectroscopy, thermal stability studies and single‐crystal X‐ray diffraction. The structure is constructed by Bi(C₁₄H₆N₂O₄)Cl fragments in which each Bi^III centre is seven‐coordinated by one Cl atom, four O atoms and two N atoms. The coordination geometry of the Bi^III cation is distorted pentagonal–bipyramidal (BiO₄N₂Cl), with one bridging carboxylate O atom and one Cl atom located in the axial positions. The Bi(C₁₄H₆N₂O₄)Cl fragments are further extended into a one‐dimensional linear polymeric structure via subsequent but different centres of symmetry (bridging carboxylate O atoms). Neighbouring linear chains are assembled via weak C—H...O and C—H...Cl hydrogen bonds, forming a three‐dimensional supramolecular architecture. Intermolecular π–π stacking interactions are observed, with centroid‐to‐centroid distances of 3.678 (4) Å, which further stabilize the structure. In addition, the solid‐state fluorescence properties of the title coordination polymer were investigated.