调Q Nd:YAG环形腔外腔倍频技术研究

用磷酸氧钛钾(KTP)作为倍频晶体,对Nd：YAG声光调Q激光的环形腔外腔倍频技术进行了实验和理论的研究,利用最大平均功率50W、声光调Q、输出频率1005Hz、灯抽运Nd：YAG激光器做为基频光光源。在基频输入功率35W时,获得了大约为31．4％的光-光转换效率的绿光输出。从实验结果分析了环形腔倍频的特性,指出了该方法的优缺点。从光束质量和聚焦光斑直径方面,对基频光和二次谐波进行了比较,提供了利用CCD测得光斑的部分图片,分析了环形腔倍频的工作原理,解决了困扰倍频技术的转换效率问题和光束质量问题。     

PID调节器在氧碘化学激光器谐振腔调腔中的应用

 通过对由比例（P）、积分（I）和微分（D）三个单元组成的PID调节器基本原理的介绍，指出合理设定PID调节器的参数是消除扰动的影响并实现腔镜快速、准确而稳定地移动的关键。实验结果表明，在调腔过程中应用PID技术，提高了静态时谐振腔各腔镜的同心度，而且在一定程度上保证了出光过程中谐振腔内各个腔镜的同心度，使得减小远场光斑的漂移和变形成为可能。     

基于机器学习的开孔加载金属腔电磁屏蔽效能评估

利用全波分析方法计算了不同电路板加载、不同孔缝和尺寸的开孔金属腔在0!5GHz范围内的屏蔽效能(SE), 获得共计5250个样本。进而利用机器学习中的随机森林回归算法, 对其中4200个样本数据进行训练, 获得了可以根据开孔腔物理尺寸、加载物材料及电磁特性和位置、频率等共计16个输入参数快速评估开孔加载金属腔屏蔽效能的机器学习模型。利用其余的1050个样本进行模型验证, 结果表明该模型可以快速准确地计算加载腔的电磁屏蔽效能。该模型具有随时根据样本量增加不断训练提高其普适性的特点, 可为实际工程中加载开孔腔的屏蔽设计及SE评估提供高效途径。     

半腔靶辐射场研究中M带X光角分布测量

 在“神光Ⅱ”实验条件下，通过在半腔靶底部开大约200μm的小孔来模拟测量内爆靶丸附近的M带X光发射的角分布。介绍了实验中采用的诊断方法和实验方法，并给出了典型的实验结果。实验结果表明从半腔靶漏口所开200μm的小孔出射的M带X光不遵从cosθ分布。实验结果有助于对黑腔物理图像的理解，并为内爆实验设计提供实验依据。     

THz自由电子激光椭圆型耦合输出光腔

在对中国工程物理研究院高功率太赫兹（THz）自由电子激光（FEL）装置理论分析和设计的基础上,针对目前THz FEL光腔设计面临的主要难点,提出了椭圆型耦合输出光腔的设计方案,并对椭圆型耦合输出光腔代替传统FEL光腔的优势、光腔品质、耦合效率等进行了分析研究。研究表明,椭圆型耦合光腔的设计更适合目前THz FEL波导光腔的光斑特点,可使光腔输出功率提高33%以上,输出耦合效率即光腔品质可提高30%~70%;随着辐射频率的提高,椭圆孔耦合输出光腔的优势提高更为明显。     

调QNd∶YAG环形腔外腔倍频技术研究

用磷酸氧钛钾 (KTP)作为倍频晶体 ,对Nd∶YAG声光调Q激光的环形腔外腔倍频技术进行了实验和理论的研究 ,利用最大平均功率 5 0W、声光调Q、输出频率 10 0 5Hz、灯抽运Nd∶YAG激光器做为基频光光源 ,在基频输入功率 35W时 ,获得了大约为 31.4 %的光光转换效率的绿光输出。从实验结果分析了环形腔倍频的特性 ,指出了该方法的优缺点。从光束质量和聚焦光斑直径方面 ,对基频光和二次谐波进行了比较 ,提供了利用CCD测得光斑的部分图片 ,分析了环形腔倍频的工作原理 ,解决了困扰倍频技术的转换效率问题和光束质量问题     

复合液腔高灵敏度水听器

探索新的换能器结构是提高换能器性能的主要途径之一。设计了一种利用液腔结构提高接收灵敏度的水听器,称为复合液腔水听器。该水听器用压电陶瓷圆管作为敏感材料,并将其放在一个底部开孔的金属圆桶内。在流体中,开孔圆桶形成两个频率不同的液腔谐振模态,并与压电陶瓷圆管的径向谐振模态衔接在一起,形成具有一定带宽的高接收灵敏度频段。采用有限元方法对水听器进行了优化设计并研制了水听器样机。水池测试结果表明,该水听器样机在1.5 k Hz～11.5 k Hz频率范围内灵敏度保持在-185 d B以上,比传统的压电陶瓷圆管水听器结构具有显著优势。     

腔内倍频调Q激光器中脉冲光场的时间不稳定性研究

以腔内倍频调Q激光器工作原理为基础,研究了多种形式抽运光分布的情况下倍频光的脉冲形状以及脉冲持续过程中光场分布的时间不稳定性,分析了倍频光光束质量随时间的变化规律.发现腔内倍频调Q激光器输出的倍频光光场分布在脉冲的持续过程中并不稳定,呈持续变化.对高斯型抽运的情况研究发现,减小腔长会使脉冲光场分布的不稳定性减小;而增加...     

对腔外原子操作时腔内原子的发射性质

考虑初始处于W态的三个双能级原子，将其中两个分别注入处于真空态的两个腔中，发生共振相互作用。通过对腔外原子进行适当的旋转及测量，可使腔场发射双模压缩光，并且当旋转角度发生变化时，压缩的程度也会发生变化。     

黑腔诊断孔堵口现象的数值模拟

 提出一个用一维数值模拟方法研究黑腔诊断孔的堵口现象模型。它被用来研究黑腔诊断孔的出射光透过率及其变化规律。计算结果表明,主要挡光区的径向运动尺度与靶宽度可比,因而一维平板模拟近似模拟诊断孔堵口现象是合理可行的;主要挡光区的密度基本上满足r >0.2 gcm^-3的规律;等离子体层的横向膨胀使得光透过率增大,在膨胀因子为0.8时计算得到在神光II激光条件下典型黑腔的加权平均透过率为0.75。     

Analysis of a right-angle conical reflector resonator by the transfer matrix method

A resonator with a right-angle conical reflector has been proposed to produce high-power CO₂ laser beams. To analyze eigenfields of the right-angle conical reflector resonator, this paper adopts and demonstrates the transfer matrix method. In this paper, the mode-fields and corresponding losses are described as eigenvectors and eigenvalues of a transfer matrix according to the self-reproducing principle of laser field. By solving the transfer matrix for eigenvectors and eigenvalues, we obtain field distributions and losses of the dominant eigenmodes. The calculation results reveal that the right-angle conical reflector resonator could be used for a high-power CO₂ laser to achieve low-order modes. However, the beam quality is reduced due to the residual blind-hole, which is in accord with the experimental result.     

High beam quality in a HyBrID copper laser operating with an unstable resonator made of a concave mirror and a plano-convex BK7 lens

This paper presents a very simple unstable resonator, made of a concave mirror (total reflector) and a bare plane–convex BK7 lens working as a convex coupling mirror, which is quite efficient for HyBrID copper laser. In addition to a good quality factor (M²=4.9), experimental results showed that it is possible to control the laser output power by introducing a variable aperture iris inside the cavity, close to the coupling lens, without spoiling beam quality. A rough theoretical model helped to explain these results as a combined effect of unstable resonator plus radial gain distribution.     

角锥棱镜激光谐振腔的基本特性

 分析了角锥棱镜对光束的相位变换作用，带二面角误差的角锥棱镜可等效于6块光楔的组合，其楔角的大小和方向由二面角误差决定。对在腔内往返传输的光线在镜面上的位置进行了分析，结果表明：3个二面角误差相同且不为零的角锥棱镜构成的谐振腔为约束非稳腔。用Fox-Li迭代法数值模拟得到了不同棱镜二面角误差情况下的谐振模式。模拟结果表明：圆形镜腔情况下基本振荡模式接近于TEM₀₃模的拉盖尔高斯光束；当3个二面角误差不相同时，模式中各个区域的强度分布不对称。采用3个二面角误差基本接近且绝对值较小的棱镜可以提高光束质量。     

Design of a 2.5 THz submillimeter wave laser with optical pump beam guiding

A ring resonator design using the same set of mirrors for pump beam and submillimeter wave (SMMW) beam guiding is introduced. Optimal design is discussed on the example of a 2.5 THz methanol laser. It turns out that due to refocussing of the pump beam on the pinhole certain focal lengths of the focussing mirror, which mainly is responsible for the beam guiding, should be avoided. Diffraction losses and pinhole losses determine optimalg-parameters for which the pump beam guiding losses of the resonator are minimum, and optimal pump beam waist radii.The setup of an experimental laser with the optimized resonator and the experimental setup to measure laser performance are described, and results concerning laser output power, beam quality and efficiency are discussed.     

A New Resonator With A Non─misaligned FourMirorReflectorAndItsEfectOnBeamQualityImprovementOfHighAveragePowerNd：YAGLasers

ＡＮｅｗＲｅｓｏｎａｔｏｒＷｉｔｈＡＮｏｎ─ｍｉｓａｌｉｇｎｅｄＦｏｕｒＭｉｒｏｒＲｅｆｌｅｃｔｏｒＡｎｄＩｔｓＥｆｅｃｔＯｎＢｅａｍＱｕａｌｉｔｙＩｍｐｒｏｖｅｍｅｎｔＯｆＨｉｇｈＡｖｅｒａｇｅＰｏｗｅｒＮｄ：ＹＡＧＬａｓｅｒｓＣ．Ｍ．Ｚｈａｏ，Ｇ...     

激光辐照下非稳腔镜变形对激光模式的影响

 分析了正支虚共焦非稳腔中腔镜变形对激光模式的影响，采用时间离散化、快速傅里叶变换（FFT）和有限元分析(FEA)方法解决腔镜变形和激光模式两者之间的耦合问题。计算结果表明，随着激光器工作时间的增加，腔镜温升和变形相应增大，谐振腔模式变差，输出光场相位均匀性变差，呈现散焦现象，输出光束质量下降。实验验证了激光器输出光束质量随出光时间的延长而逐渐变坏。     

高光束质量、高功率稳定性激光器的设计及实验研究

高光束质量、高功率稳定性激光器在激光加工、激光测量等领域具有广泛的用途.为了实现激光器腔内光斑聚焦同时减少色散和体积,人们常常将曲面反射镜用在激光谐振腔中,但光束倾斜入射到曲面反射镜往往会引起像散,从而导致光斑质量恶化,并降低激光器的性能.另一方面,在高功率激光器或超短脉冲激光器中,激光增益介质热透镜焦距的起伏,是导致激光输出功率波动的主要原因之一.针对激光器的像散和功率波动这两个问题,本文提出了一套简单高效的解决方案,在考虑像散补偿和热透镜效应的基础上,基于传播变换圆理论,首次提出一种可实现高光束质量、高功率稳定性激光器谐振腔的设计方法,并对采用该方法所设计出的超短脉冲激光器进行理论与实验研究.研究结果表明,利用该方法设计的激光谐振腔,两端臂像散能够完全被补偿,实验上实现了基模高斯光束输出;当激光晶体热透镜焦距改变时,该方法所设计出的激光谐振腔内各关键位置光斑半径的变化,显著地小于普通谐振腔,在相同外界条件下,其输出激光功率稳定性明显优于普通激光器.     

Performance of a 80 W copper vapor laser with “alignment free” unstable CAT-EYE resonator and other configurations using intra-cavity apertures

Performance of a kinetically enhanced copper vapor laser (KE-CVL) with various stable/unstable “alignment free” CAT-EYE resonator configurations are presented here in this paper. The laser used in the experiment was a 45 mm bore (∼2 l discharge volume) kinetically enhanced copper vapor laser developed in our laboratory and capable of generating maximum power of ∼80 W (at ∼9.8 kHz). The efficiency of the laser was ∼1.4% and beam divergence of ∼3.5 mrad in a plane-plane standard multimode cavity. For the first time performance of unstable CAT-EYE resonator is demonstrated with a CVL/KE-CVL. On using unstable CAT-EYE resonator the divergence of the laser beam reduced to ∼0.22 mrad (∼20-fold reduction as compared to conventional plane-plane cavity), ∼40 W output power and with excellent misalignment tolerance. The laser output power was found to be within ∼5% drift/decline with misalignment angle of about 4 mrad between the mirrors. This is a significant improvement in comparison to standard conventional unstable resonator (M ∼ 50) CVL where ∼0.5 mrad divergence is achieved with power drift/decline of about 45% at ∼4 mrad misalignment angle.Off-axis unstable CAT-EYE unstable resonator was also demonstrated for the first time with further reduction in beam divergence to ∼0.13 mrad and with output power of ∼28 W. The misalignment tolerance was found to be highest in case of off-axis unstable CAT-EYE resonator with decline/drift in laser power of only ∼10% for misalignment angle as high as ∼8 mrad. Performance with intra-cavity apertures in plane-plane type CAT-EYE resonator for transverse mode control is also presented for the first time in CVLs. It is observed that the laser beam divergence reduces significantly to 1.25 mrad (a factor of 2) on using an aperture of ∼3.5 mm at the CAT-EYE reflector as compared to its normal (R = F = d) configuration without aperture. In case of stable CAT-EYE resonator the average beam divergence reduces from 8 mrad to 4 mrad (factor of 2) on using intra-cavity aperture of about 3 mm. It was also observed that high misalignment tolerance was retained on using intra-cavity apertures in almost all the CAT-EYE resonators. Use of intra-cavity mesh was also demonstrated for the first time with stable CAT-EYE resonator for improving the beam focus-ability. Average beam divergence was reduced by a factor of 2.5 (from 8 mrad to 3 mrad) on using intra-cavity mesh. These new configurations in CAT-EYE resonators in KE-CVLs are found to be effective in improving and controlling the laser beam divergence significantly with additional characteristic of high misalignment tolerance.     

相位共轭谐振腔改善激光器波前像差特性研究

在高功率激光器中采用相位共轭谐振腔技术可以补偿动态波前像差,在校正畸变的输出光束方面有极其重要的应用。分析了相位共轭腔的模式结构特性及稳定性,在实际高功率激光器中采用相位共轭谐振腔,使得激光系统的光束质量得到了极大改善。通过实验数据分析,提出在激光器系统中描述光束质量只用PV值和RMS值来量度是不足的,并利用结合光束环围能量分布图像和平均离焦系数来评价系统光束质量。实验结果表明,采用相位共轭谐振腔使得焦平面环围能量更为集中,同时平均离焦系数更接近零,结合上述方法评价系统光束质量更具实际意义。     

高斯光束与谐振腔基模模式光路谐振匹配的分析与校准

为了降低高斯光束与谐振腔耦合过程中失调量和失配量对基于无源谐振腔测量技术精度的影响, 采用高斯光束变换规律、模式耦合有关理论以及光束传播坐标变换等相关理论, 就失调量和失配量对基模耦合效率的影响分别进行分析和模拟, 并据此给出了一般情况下两个参考量同时存在时基模耦合效率的表达式. 分析表明: 失配量的存在主要影响激光器与谐振腔的耦合效率, 而对高阶模式的激发影响较小, 因此对谐振腔的衰减线型影响较小; 失调量的存在对谐振腔高阶模式的激发起主要作用, 给测量带来严重误差. 该结论为利用腔出射光信号来确定误调参量值的实验方案提供了依据. 因此, 在考虑光源光谱线宽的情况下, 就光源光谱线宽的特性提出两种装调校准方案: 基于法布里-珀罗干涉仪法和基于多维象限探测器探测谐振腔出射光的调节回路, 这将为分析基于无源谐振腔的相关技术测量误差来源以及实现测量系统的高精度装调提供理论指导.