Facile synthesis of fluorescent quantum dot‐polymer nanocomposites via frontal polymerization

We report an available approach for quickly fabricating CdS QD‐polymer nanocomposites via frontal polymerization (FP). First, we synthesized (3‐mercaptopropyl)‐1‐trimethoxysilane (MPS)‐capped CdS quantum dots (QDs). With these MPS‐capped CdS QDs containing mercapto groups, MPS‐capped CdS QDs can be easily incorporated into a poly(N‐methylolacrylamide) (PNMA) matrix via FP. A variety of features for preparing QD‐polymer nanocomposites, such as initiator concentration and CdS concentration, were thoroughly investigated. The fluorescence properties of QD‐polymer nanocomposites prepared via FP are comparatively investigated on the basis of ultraviolet–visible (UV–vis) spectra and photoluminescence (PL) spectra. Results show that the PL intensity of QD‐polymer nanocomposites prepared via the FP method is superior to that obtained by the traditional batch polymerization (BP) method. In addition, by measuring the changes of PL intensity of the samples immersed in different concentrations of copper acetate solution, we found the QD‐polymer nanocomposites can be ultrasensitive to copper ions. This FP process can be exploited as a facile and rapid way for synthesis QD‐polymer nanocomposites on a large scale, avoiding the fluorescence quenching of nanocrystals during incorporation nanocrystals into polymer matrices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2170–2177, 2010     

Quenching of photoluminescence in conjugates of quantum dots and single-walled carbon nanotube

Development of quantum dot (QD) based device components requires controlled integration of QDs into different photonic and electronic materials. In this regard, introduction of methods for regular arrangement of QDs and investigation of properties of QD-based assemblies are important. In the current work we report (1) controlled conjugation of CdSe-ZnS QDs to sidewall-functionalized single-walled carbon nanotube (SWCNT) templates (2) and the effect of conjugation of QDs to SWCNT on the photoluminescence (PL) properties of QDs. We identified that PL intensity and lifetime of QDs are considerably reduced after conjugation to SWCNT. The origin of the quenching of the PL intensity and lifetime was discussed in terms of F?rster resonance energy transfer (FRET). FRET involves nonradiative transfer of energy from a photoexcited QD (energy donor) to a nearby SWCNT (energy acceptor) in the ground state. This was examined by varying the density of QDs on SWCNT and conjugating smaller and bigger QDs to the same SWCNT. We estimated the FRET efficiency in QD-SWCNT conjugates from the quenching of the PL intensity and lifetime and identified that FRET is independent of the density and type of QDs on SWCNT but inherent to QD-SWCNT conjugates.     

Pushing the band gap envelope: mid-infrared emitting colloidal PbSe quantum dots

Efficient mid-infrared sources are of considerable general interest for gas analysis, remote sensing, and atmospheric monitoring, but existing technologies are limited. Here, we report the synthesis of the first colloidal QDs having photoluminescence (PL) in the mid-infrared. We show particle-size-tunable mid-infrared emission for large (10-17 nm), but quantum-confined, colloidal PbSe QDs, with efficient, narrow-bandwidth PL at energies as low as 0.30 eV (4.1 mum). Applying two new synthetic routes, we have achieved fine control of QD size and size distribution, allowing us to provide the first systematic correlation of QD size with PL energy for PbSe QDs emitting at wavelengths longer than 2 mum, results which are compared with a literature model. For the entire spectral range reported, we provide measured quantum yields in emission, showing a marked decrease with increasing QD size, for which we include a possible explanation. Finally, we present very promising preliminary results for overcoating PbSe with CdSe, a wider-gap semiconductor. We show PL enhanced by approximately 6-fold for such core/shell samples.     

Energy/Hole Transfer Phenomena in Hybrid α‐Sexithiophene (α‐STH) Nanoparticle–CdTe Quantum‐Dot Nanocomposites

Considerable attention has been paid to hybrid organic–inorganic nanocomposites for designing new optical materials. Herein, we demonstrate the energy and hole transfer of hybrid hole‐transporting α‐sexithiophene (α‐STH) nanoparticle–CdTe quantum dot (QD) nanocomposites using steady‐state and time‐resolved spectroscopy. Absorption and photoluminescence studies confirm the loss of planarity of the α‐sexithiophene molecule due to the formation of polymer nanoparticles. Upon photoexcitation at 370 nm, a nonradiative energy transfer (73 %) occurs from the hole‐transporting α‐STH nanoparticles to the CdTe nanoparticles with a rate of energy transfer of 6.13×10⁹ s^?1. However, photoluminescence quenching of the CdTe QDs in the presence of the hole‐transporting α‐STH nanoparticles is observed at 490 nm excitation, which is due to both static‐quenching and hole‐transfer‐based dynamic‐quenching phenomena. The calculated hole‐transporting rate is 7.13×10⁷ s^?1 in the presence of 42×10^?8 M α‐STH nanoparticles. Our findings suggest that the interest in α‐sexithiophene (α‐STH) nanoparticle–CdTe QD hybrid nanocomposites might grow in the coming years because of various potential applications, such as solar cells, optoelectronic devices, and so on.     

Polyfluorenes minimally doped with 1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene chromophore: Their synthesis,characterization, and application to white‐light‐emitting materials

Copolyfluorenes ( PFR1 and PFR2 ), chemically doped with 0.1 and 0.025 mol % 2,5‐dihexyloxy‐1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene (MR chromophere) were synthesized by the Suzuki coupling reaction. The PFR s were used to fabricate white‐light‐emitting devices through incomplete energy transfer. Because of the low content of the MR chromophore, the optical, thermal, and electrochemical properties of the PFR s were almost identical to those of polyfluorene, except for their photoluminescent (PL) and electroluminescent (EL) properties. The copolymer films showed PL peaks at about 428 and 570 nm originating from fluorene segments and MR chromophores, respectively. Compared with the model compound ( MR ), the polymer chains extended the conjugation length of the MR chromophores and exhibited a 20–48 nm red‐shift in the emission band. In addition, the lower LUMO level of the MR (?3.27 eV) was expected to improve the electron injection. The EL devices [ITO/PEDOT:PSS/ PFR s/Ca (50 nm)/Al (100 nm)] showed a broad emission band, covering the entire visible region, with chromaticity coordinates of (0.36, 0.35) and (0.32, 0.30) for PFR1 and PFR2 devices, respectively. The emission color of the PFR2 device was very similar to that of a pure white light (0.33, 0.33); and the maximal brightness and current efficiency were 3011 cd/m² and 1.98 cd/A, respectively, which surpass those found for polyfluorene devices (1005 cd/m², 0.28 cd/A). A). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3703–3713, 2008     

3,4‐Dithiaphosphole and 3,3′,4,4′‐Tetrathia‐1,1′‐Biphosphole π‐Conjugated Systems: S Makes the Impact

Conjugated systems based on phospholes and 1,1′‐biphospholes bearing 3,4‐ethylenedithia bridges have been prepared using the Fagan–Nugent route. The mechanism of this organometallic route leading to intermediate zirconacyclopentadienes has been investigated by using theoretical calculations. This study revealed that the oxidative coupling leading to zirconacyclopentadienes is favored over oxidative addition within the S? C≡C bond both thermodynamically and kinetically. The impact of the presence of the S atoms on the optical and electrochemical behavior of the phospholes and 1,1′‐biphospholes has been systematically evaluated both experimentally and theoretically. A comparison with their “all‐carbon” analogues is provided. Of particular interest, this comparative study revealed that the introduction of S atoms has an impact on the electronic properties of phosphole‐based conjugated systems. A decrease of the HOMO–LUMO separation and a stabilization of the LUMO level were observed. These general trends are also observed with 1,1′‐biphospholes exhibiting σ–π conjugation. The P atom of the 3,4‐ethylenedithiaphospholes can be selectively oxidized by S₈ or O₂. These P modifications result in a lowering of the HOMO–LUMO separation as well as an increase of the reduction and oxidation potentials. The S atoms of the 3,4‐ethylenedithia bridge of the 2,5‐phosphole have been oxidized using m‐chloroperoxybenzoic acid. The resulting 3,4‐ethylenesulfoxide oxophosphole was characterized by an X‐ray diffraction study. Experimental and theoretical studies show that this novel chemical manipulation results in an increase of the HOMO–LUMO separation and an important decrease of the LUMO level. The electropolymerization of 2‐thienyl‐capped 3,4‐ethylenedithiathioxophosphole and 1,1′‐biphosphole is reported. The impact of the S substituents on the polymer properties is discussed.     

Synthesis and chemosensing behavior of fluorene‐based alternating copolymers containing ether side chains and Si–vinylene units in the main chain

Alternating copolymerization of 9,9‐bis(3,6,9‐trioxadecyl)‐2,7‐dibromofluorene (ODFl) or 9,9‐bis(3,6‐dioxaheptyl)‐2,7‐dibromofluorene with Si containing divinyl compounds, divinyldiphenylsilane (VPS), or divinyldimethylsilane (VMS) is investigated using the Mizoroki–Heck reaction with palladium(II) acetate. The corresponding alternating copolymer is obtained in the copolymerization of ODFl with VPS. The copolymerization of ODFl with VMS yields low molecular weight oligomers. Optical properties of the ODFl–VPS copolymer have been investigated with UV–vis absorption and photoluminescence (PL) spectroscopy. The ODFl–VPS copolymer shows absorption peaks due to π–π* transition and intramolecular charge transfer through σ–π moiety at around 330 and 360–400 nm, respectively. An emission peak is observed at 450 nm in the PL spectrum of the ODFl–VPS copolymer, and the PL quantum yield is 0.19. The PL spectroscopy of ODFl–VPS copolymer is investigated in the presence of Li⁺, Na⁺, and K⁺, and the intensity of emission peak is decreased by those metal cations, especially by Na⁺. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and optical properties of σ–π conjugated organic–inorganic hybrid gels

Organic–inorganic hybrid gels containing Si‐vinylene units have been synthesized by a hydrosilylation reaction of tri‐ or tetra‐ethynyl aryl compounds, 1,3,5‐triethynylbenzene (TEB), 3,3′,5,5′‐tetraethynylbiphenyl (TEBP), or tetrakis(4‐ethynylphenyl)methane (TEPM), and bisdimethylsilyl compounds, 1,1,3,3‐tetramethyldisiloxane (TMDS) or 1,4‐bisdimetylsilylbenzene (BDMSB), in toluene. Network structure of the resulting gels was quantitatively characterized by a scanning microscopic light scattering. The reactions yielded the gels having homogeneous network structure of 1.5–2.9 nm mesh size under the monomer concentrations that were relatively higher than the critical gelation concentration. The gels obtained from TEB showed broad absorption in the range from 340 to 370 nm, and emission in the range from 440 to 490 nm. The TEB–BDMSB gels showed remarkable red shift of the emission in comparison with that of the corresponding reaction solutions derived from the network formed by σ–π conjugation. The TEPM–TMDS, BDMSB gels exited by 280 nm showed not only the emission peak at around 360 nm derived from TEPM, but the broad peak at around 420 nm, which should be derived from interaction between phenyl groups of TEPM in the gels. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1360–1368     

DNA‐Templated Assembly of a Heterobivalent Quantum Dot Nanoprobe For Extra‐ and Intracellular Dual‐Targeting and Imaging of Live Cancer Cells

Quantum dots (QDs) hold great promise for the molecular imaging of cancer because of their superior optical properties. Although cell‐surface biomarkers can be readily imaged with QDs, non‐invasive live‐cell imaging of critical intracellular cancer markers with QDs is a great challenge because of the difficulties in the automatic delivery of QD probes to the cytosol and the ambiguity of intracellular targeting signals. Herein, we report a new type of DNA‐templated heterobivalent QD nanoprobes with the ability to target and image two spatially isolated cancer markers (nucleolin and mRNA) present on the cell surface and in the cell cytosol. Bypassing endolysosomal sequestration, this type of QD nanoprobes undergo macropinocytosis following the nucleolin targeting and then translocate to the cytosol for mRNA targeting. Fluorescence resonance energy transfer (FRET) based confocal microscopy enables unambiguous signal deconvolution of mRNA‐targeted QD nanoprobes inside cancer cells.     

Detection of Hg2+ and F− Ions by Using Fluorescence Switching of Quantum Dots in an Au‐Cluster–CdTe QD Nanocomposite

A single probe of an Au nanocluster–CdTe quantum dots nanocomposite has been developed by using tripeptide‐capped CdTe quantum dots (QD) and bovine serum albumin (BSA) protein‐conjugated Au₂₅ nanocluster (NC) for detection of both Hg²⁺ ion and F^? ion. The formation of Au‐NC–CdTe QD nanocomposite has been confirmed by TEM, steady state and time resolved spectroscopy, CD and FTIR studies. A significant signal off (74 % PL quenching at 553 nm) phenomenon of this nanocomposite is observed in presence of 6.56×10^?7 M Hg²⁺ ion, due to salt‐induced aggregation. However, a dramatic PL enhancement (128 %) of the Au‐NC–CdTe QD nanocomposite is observed in presence of 8.47×10^?7 M F^? anion. The calculated limit of detections (LOD) of Hg²⁺ ion concentration and F^? ion concentration are found to be 9 and 117 nM , respectively, which are within the safety range set by the United States Environment Protection Agency. Thus, the simple Au‐NC–CdTe QD optical‐based sensor is very useful to detect both toxic cations and anions.     

dl‐Aspartic Acid‐Mediated Hydrothermal Synthesis of β‐ZnS Microspheres and Their Optical Properties

ZnS hollow microspheres were synthesized by a dl ‐aspartic acid mediated hydrothermal route. dl ‐aspartic acid plays an important role as crystal growth soft template, which regulates the release of Zn²⁺ ions for the formation of ZnS hollow spheres. The formation of these hollow spheres was mainly attributed to an Ostwald ripening process. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), UV/Vis spectroscopy (UV), and photoluminescence (PL). The shells of the microspheres were composed of ZnS quantum dots (QDs) with the average size of 2.31 nm. The average microspheres diameter is 0.5–3.5 μm. The shell thickness of the hollow sphere is ≈?300 nm. The optical bandgap energy increased significantly compared to the bulk ZnS material due to the strong quantum confinement effect. Two strong emissions at ≈?425 nm and ≈?472 nm in the photoluminescence (PL) spectrum of ZnS hollow microspheres indicate strong quantum confinement because of the presence of QDs.     

Versatile route for tuning optical properties of poly(2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene)

In this contribution, we report a versatile method for tuning optical properties of poly(2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene) (MEH‐PPV) in its solution with 1,2‐dichloroethane, accomplished by reacting with pyridinium formate (PF), a volatile organic salt. We can systematically control the positions of absorption and photoluminescent (PL) spectra of MEH‐PPV by adjusting the concentration of PF in the solution. The addition of 10 vol % PF caused a blue‐shift in the absorption spectra by about 65 nm. When the concentration of PF decreased to 0.1 vol %, the blue‐shift occurred to a lesser extent, about 25 nm. The measurements of PL spectra showed similar behaviors. The λ_max shifted from 558 nm to 546 and 552 nm when 10 and 0.1 vol % of PF were added, respectively. The changes of PL colors from orange to yellow and green, respectively, were observed by naked eyes. Structural investigation by nuclear magnetic resonance and Fourier‐transformed infrared spectroscopy indicated that the changes of the optical properties were due to chemical modifications along the main chain and the side groups of MEH‐PPV. These results implied a simple route for engineering the HOMO–LUMO energy gap of MEH‐PPV, which could be utilized in advanced applications such as organic light‐emitting devices and solar cells. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 696–705, 2009     

The Application of Amine‐Terminated Silicon Quantum Dots on the Imaging of Human Serum Proteins after Polyacrylamide Gel Electrophoresis (PAGE)

Novel amine‐terminated silicon (Si) quantum dots (QDs) were synthesized and applied for the detection of human serum proteins on gels directly after polyacrylamide gel electrophoresis (PAGE). The diameter of these stable amine‐terminated Si QDs was in the range of 0.5–2.0 nm. In this study, the fluorescent imaging conditions, such as the buffer solution, pH value, buffer concentration and quantity of Si QDs, were optimized and the possible mechanisms of Si QDs–protein interaction were analyzed. The mode of Si QDs and human serum albumin association was found to occur by hydrogen bond interactions; this was probably attributed to the interaction between the amino group of amine‐terminated Si QDs and the carboxyl group of proteins. Meanwhile, human serum proteins separated by native 1D and native 2D electrophoresis were detected by Si QD‐based fluorescent imaging. Some proteins, such as isoform 1 of α‐1‐antitrypsin, complement C3 (Fragment) and hemopexin, which were identified by mass spectrometry (MS), were easily detected by using Si QDs, but not with CBB‐R250 staining. The Si QDs‐based fluorescent imaging technique with high resolution is a sensitive and dependable method for direct detection of human serum proteins, and has enormous potential in clinical diagnosis.     

Role of the Polymer Matrix on the Photoluminescence of Embedded CdSe Quantum Dots

The photoluminescence (PL) of CdSe quantum dots (QDs) that form stable nanocomposites with polymer liquid crystals (LCs) as smectic C hydrogen‐bonded homopolymers from a family of poly[4‐(n‐acryloyloxyalkyloxy)benzoic acids] is reported. The matrix that results from the combination of these units with methoxyphenyl benzoate and cholesterol‐containing units has a cholesteric structure. The exciton PL band of QDs in the smectic matrix is redshifted with respect to QDs in solution, whereas a blueshift is observed with the cholesteric matrix. The PL lifetimes and quantum yield in cholesteric nanocomposites are higher than those in smectic ones. This is interpreted in terms of a higher order of the smectic matrix in comparison to the cholesteric one. CdSe QDs in the ordered smectic matrix demonstrate a splitting of the exciton PL band and an enhancement of the photoinduced differential transmission. These results reveal the effects of the structure of polymer LC matrices on the optical properties of embedded QDs, which offer new possibilities for photonic applications of QD–LC polymer nanocomposites.     

Compact,Polyvalent Mannose Quantum Dots as Sensitive,Ratiometric FRET Probes for Multivalent Protein–Ligand Interactions

A highly efficient cap‐exchange approach for preparing compact, dense polyvalent mannose‐capped quantum dots (QDs) has been developed. The resulting QDs have been successfully used to probe multivalent interactions of HIV/Ebola receptors DC‐SIGN and DC‐SIGNR (collectively termed as DC‐SIGN/R) using a sensitive, ratiometric Förster resonance energy transfer (FRET) assay. The QD probes specifically bind DC‐SIGN, but not its closely related receptor DC‐SIGNR, which is further confirmed by its specific blocking of DC‐SIGN engagement with the Ebola virus glycoprotein. Tuning the QD surface mannose valency reveals that DC‐SIGN binds more efficiently to densely packed mannosides. A FRET‐based thermodynamic study reveals that the binding is enthalpy‐driven. This work establishes QD FRET as a rapid, sensitive technique for probing structure and thermodynamics of multivalent protein–ligand interactions.     

Compact,Polyvalent Mannose Quantum Dots as Sensitive,Ratiometric FRET Probes for Multivalent Protein–Ligand Interactions

A highly efficient cap‐exchange approach for preparing compact, dense polyvalent mannose‐capped quantum dots (QDs) has been developed. The resulting QDs have been successfully used to probe multivalent interactions of HIV/Ebola receptors DC‐SIGN and DC‐SIGNR (collectively termed as DC‐SIGN/R) using a sensitive, ratiometric Förster resonance energy transfer (FRET) assay. The QD probes specifically bind DC‐SIGN, but not its closely related receptor DC‐SIGNR, which is further confirmed by its specific blocking of DC‐SIGN engagement with the Ebola virus glycoprotein. Tuning the QD surface mannose valency reveals that DC‐SIGN binds more efficiently to densely packed mannosides. A FRET‐based thermodynamic study reveals that the binding is enthalpy‐driven. This work establishes QD FRET as a rapid, sensitive technique for probing structure and thermodynamics of multivalent protein–ligand interactions.     

Enhancement of color purity in blue light emitting poly(fluorene)s and poly(p‐phenylene)s with 2,6‐distyrylpyridine kinked segments along the backbone

2,6‐bis(4‐Distyrylpyridine) ( 1 ) was synthesized by the condensation of 2,6‐dimethylpyridine with 4‐bromobenzaldehyde. Two new series of soluble random or alternating polyfluorenes ( PF‐Py ) and poly‐p‐phenylenes ( PP‐Py ) with various compositions were prepared by Suzuki coupling utilizing 1 as a comonomer. These polymers showed optical band gaps of 3.00–3.07 eV and photoluminescence (PL) quantum yields in solution of 0.37–0.91 for PF‐Py and 0.29–0.38 for PP‐Py . Polymers PF‐Py emitted blue light with PL maximum at 410–424 nm in solution and 406–428 nm in thin films that was red shifted with increasing distyrylpyridine content. Polymers PP‐Py behaved as blue emitters both in solution and in solid state, with PL maximum at 416–436 nm. The optical properties of these polymers could be tuned by the reversible protonation–deprotonation process of the pyridine ring. The emitted color of the polymers in solution and thin film could be changed continuously between blue and green (PL maximum up to about 520 nm) by exposing the polymers to the acid or base environment. Thin films of PF‐Py displayed excellent color stability with a small red shift of 10 nm but without additional emission band in the long wave region of the spectrum, even after being annealed at high temperature for a long time. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4486–4495, 2005     

Sensing Chiral Drugs by Using CdSe/ZnS Nanoparticles Capped with N‐Acetyl‐L‐Cysteine Methyl Ester

Chiral quantum dots (QDs), differing in their core or shell size and, consequently, in their optical properties, were synthesized by the treatment of commercially available amine‐capped quantum dots with methyl ester N‐acetyl‐L ‐cysteine (CysP). Interestingly, their colloidal methanol solutions remain stable for several months. Their NMR and IR spectra were in accordance with CysP binding to the QD surface through two anchoring groups; its thiolate (strongly bound) and the carbonyl group of its ester (weaker bound) group, whereas their circular dichroism (CD) spectra showed a new broad redshifted band, suggesting that the attachment to the QD surface modified the conformational equilibrium towards conformer(s) with optical activity in this region. These QDs were sufficiently fluorescent to perform studies of the chiral recognition of drugs, in particular the aryl propionic acids (APAs) ketoprofen (KP), naproxen (NP), flurbiprofen (FP), and ibuprofen (IP). We used different drug concentration ranges, depending on the QD solubility. All the assayed drugs quenched the QD emission in a concentration‐dependent mode. Quenching fluorescence assays with the chiral QDs (CS@CysP) showed their extraordinary capacity for the chiral recognition of KP, NP, and FP, and particularly in the case of KP and FP, a remarkable positive allosteric effect was detected for the R enantiomer. By using a drug/CS@CysP molar ratio of 5000:1 and 2500:1, the changes of intensity and the sign of the CD spectrum of the drug evidenced the dissociation of the drug carboxylic group in the presence of the QD.     

Multidentate surface ligand exchange for the immobilization of CdSe/ZnS quantum dots and surface quantum dot-oligonucleotide conjugates

A method for synthesizing multidentate thiol ligands on fused silica surfaces (e.g., optical fibers) was developed for the immobilization of CdSe/ZnS quantum dots (QDs) capped with hydrophilic or hydrophobic ligands. This work was motivated by the poor stability of QDs immobilized via monodentate thiol ligands and the need for stable immobilization strategies in the development of sensor technologies based on QDs. Multi-dentate immobilization was able to withstand washing protocols, and surface ligand exchange occurred via self-assembly through the zinc-metal affinity interaction. Atomic force and scanning electron microscopy images suggested that the QDs were immobilized at high density, approximately 2-4 x 10 (13) cm (-2). It was possible to immobilize one, two, or three colors of QD. Upon immobilization, 1-2 nm bathochromic shifts in the PL spectra were observed. This was attributed to both ligand exchange and the change in local environment. The change in environment was accompanied by a decrease in PL lifetime. Self-assembly of immobilized QD-oligonucleotide and QD-avidin conjugates was also demonstrated. These conjugates were able to hybridize with complementary oligonucleotide and bind biotin, respectively. This versatile immobilization chemistry is an important step in the development of surface-based QD nanosensors. Such technology requires QDs to be immobilized such that they remain accessible to target molecules in solution.     

Interface effects and relaxation processes in nanocomposites based on CdSe/ZnS semiconductor quantum dots and porphyrin molecules

Controllable self-assembly and properties of nanocomposites based on CdSe/ZnS semiconductor quantum dots (QDs) and tetrapyridylporphyrin molecules (H₂P) as well as the dynamics of relaxation processes in these systems were studied for solutions and single nanoobjects in the temperature range of 77–295 K. It was proved that the formation of surface states of different nature is crucial to nonradiative relaxation of exciton excitation in QDs. The efficiency of QD→Н₂Р energy transfer was shown to be at most 10–15%. Regularities of photoluminescence (PL) quenching for QDs in nanocomposites in solutions of different polarity correlate with the dependences of PL blinking for single QDs. A scheme was proposed of excited states and main relaxation channels of exciton excitation energy in semiconductor QDs and QD–Н₂Р nanocomposites.