Facile synthesis of fluorescent quantum dot‐polymer nanocomposites via frontal polymerization

We report an available approach for quickly fabricating CdS QD‐polymer nanocomposites via frontal polymerization (FP). First, we synthesized (3‐mercaptopropyl)‐1‐trimethoxysilane (MPS)‐capped CdS quantum dots (QDs). With these MPS‐capped CdS QDs containing mercapto groups, MPS‐capped CdS QDs can be easily incorporated into a poly(N‐methylolacrylamide) (PNMA) matrix via FP. A variety of features for preparing QD‐polymer nanocomposites, such as initiator concentration and CdS concentration, were thoroughly investigated. The fluorescence properties of QD‐polymer nanocomposites prepared via FP are comparatively investigated on the basis of ultraviolet–visible (UV–vis) spectra and photoluminescence (PL) spectra. Results show that the PL intensity of QD‐polymer nanocomposites prepared via the FP method is superior to that obtained by the traditional batch polymerization (BP) method. In addition, by measuring the changes of PL intensity of the samples immersed in different concentrations of copper acetate solution, we found the QD‐polymer nanocomposites can be ultrasensitive to copper ions. This FP process can be exploited as a facile and rapid way for synthesis QD‐polymer nanocomposites on a large scale, avoiding the fluorescence quenching of nanocrystals during incorporation nanocrystals into polymer matrices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2170–2177, 2010     

Interaction of Globular Plasma Proteins with Water‐Soluble CdSe Quantum Dots

The interactions between water‐soluble semiconductor quantum dots [hydrophilic 3‐mercaptopropionic acid (MPA)‐coated CdSe] and three globular plasma proteins, namely, bovine serum albumin (BSA), β‐lactoglobulin (β‐Lg) and human serum albumin (HSA), are investigated. Acidic residues of protein molecules form electrostatic interactions with these quantum dots (QDs). To determine the stoichiometry of proteins bound to QDs, we used dynamic light scattering (DLS) and zeta potential techniques. Fluorescence resonance energy transfer (FRET) experiments revealed energy transfer from tryptophan residues in the proteins to the QD particles. Quenching of the intrinsic fluorescence of protein molecules was noticed during this binding process (hierarchy HSA<β‐Lg <BSA, lower binding affinity for hydrophobic protein molecules). Upon binding with QD particles, the protein molecules underwent substantial conformational changes at the secondary‐structure level (50 % helicity lost), due to loss in hydration.     

Self‐Assembled Luminescent Quantum Dots To Generate Full‐Color and White Circularly Polarized Light

The design and fabrication of quantum dots (QDs) with circularly polarized luminescence (CPL) has been a great challenge in developing chiroptical materials. We herein propose an alternative to the use of chiral capping reagents on QDs for the fabrication of CPL‐active QDs that is based on the supramolecular self‐assembly of achiral QDs with chiral gelators. Full‐color‐tunable CPL‐active QDs were obtained by simple mixing or gelation of a chiral gelator and achiral 3‐mercaptopropionic acid capped QDs. In addition, the handedness of the CPL can be controlled by the supramolecular chirality of the gels. Moreover, QDs with circularly polarized white light emission were fabricated for the first time by tuning the blending ratio of colorful QDs in the gel. The chirality transfer in the co‐assembly of the achiral QDs with the gelator and the spacer effect of the capping reagents on the QD surface are also discussed. This work provides new insight into the design of functional chiroptical materials.     

Preparation of High‐Performance Water‐Soluble Quantum Dots for Biorecognition through Fluorescence Resonance Energy Transfer

An improved method for the synthesis of high‐performance and water‐soluble quantum dots (QDs) involving the encapsulation of mercaptosuccinic acid coated QDs (MSA‐QDs) with poly(diallyldimethylammonium chloride) (PDDA) followed by their direct photoactivation with fluorescent radiation near 295 K to yield PDDA‐coated QDs (PDDA‐QDs) has been demonstrated. The quantum yield (QY) of the PDDA‐QDs was significantly improved from 0.6 (QY of MSA‐QDs) to 48 %. By using this synthetic strategy, highly photoluminescent PDDA‐QDs of varied size were readily prepared. The surface properties of PDDA‐QDs and MSA‐QDs were extensively characterized. The highly luminescent and positively charged PDDA‐QDs serve as a useful and convenient tool for protein adsorption. With a Δ⁵‐3‐ketosteroid isomerase adsorbed PDDA‐QD complex, the biorecognition of steroids was demonstrated through the application of fluorescent resonance energy transfer.     

Quantum‐Dot‐Sensitized Solar Cells

Quantum‐dot‐sensitized solar cells (QDSCs) are a promising low‐cost alternative to existing photovoltaic technologies such as crystalline silicon and thin inorganic films. The absorption spectrum of quantum dots (QDs) can be tailored by controlling their size, and QDs can be produced by low‐cost methods. Nanostructures such as mesoporous films, nanorods, nanowires, nanotubes and nanosheets with high microscopic surface area, redox electrolytes and solid‐state hole conductors are borrowed from standard dye‐sensitized solar cells (DSCs) to fabricate electron conductor/QD monolayer/hole conductor junctions with high optical absorbance. Herein we focus on recent developments in the field of mono‐ and polydisperse QDSCs. Stability issues are adressed, coating methods are presented, performance is reviewed and special emphasis is given to the importance of energy‐level alignment to increase the light to electric power conversion efficiency.     

Stabilizer‐Free Poly(lactide‐co‐glycolide) Nanoparticles Conjugated with Quantum Dots as a Potential Carrier Applied in Human Mesenchymal Stem Cells

We report that human mesenchymal stem cells (hMSCs) were successfully labeled with poly(lactide‐co‐glycolide) nanoparticles (PLGA NPs) surface‐conjugated quantum dots (QDs) (PLGA‐QD NPs) via endocytosis pathway. These NPs were not toxicity even treated with PLGA‐QD NPs at high concentrations for at least four weeks. Besides, PLGA‐QD NPs‐labeled hMSCs did not change their proliferation and differentiation capability toward the cell fates of adipocytes, osteocytes, and chrondrocytes. It's known that PLGA has been widely employed to act as delivery carrier which encapsulates drugs and releases them under a controlled way. Currently, we have also demonstrated that FITC‐loaded PLGA‐QD NPs degraded in hMSCs to achieve intracellular release of FITC. The aim of this research is to investigate viability, proliferation and differentiation capability and the potential for gene delivery of MSCs labeled with PLGA‐QD NPs. In addition to PLGA‐QD NPs, QDs alone were used to serve as a control set for comparison.     

Current Advances in Quantum‐Dots‐Based Photoelectrochemical Immunoassays

As a newly developed technique, photoelectrochemical (PEC) immunoassays have attracted great attention in recent years because of their low cost and desirable sensitivity. Because the detection signal originates from the photoelectric conversion of photoelectric materials, the appearance and application of quantum dots (QDs), which possess unique photophysical properties and regulated optoelectronic characteristics, has taken the development of PEC immunoassays to new heights. This review concisely introduces the general mechanism of QDs‐based photoelectric conversion for immunoassays and summarizes the current advances in QD applications in immunoassays. Given that signal strategies and photoactive materials are the key elements in PEC biosensor systems, we comprehensively highlight the state‐of‐the‐art signaling strategies and various applications of QDs in PEC immunoassays to introduce advances in QDs‐based PEC immunoassays. Finally, challenges and future developmental trends are briefly discussed     

Near‐Infrared‐Light‐Triggered Antimicrobial Indium Phosphide Quantum Dots

The emergence of multidrug‐resistant (MDR) pathogens represents one of the most urgent global public health crises. Light‐activated quantum dots (QDs) are alternative antimicrobials, with efficient transport, low cost, and therapeutic efficacy, and they can act as antibiotic potentiators, with a mechanism of action orthogonal to small‐molecule drugs. Furthermore, light‐activation enhances control over the spatiotemporal release and dose of the therapeutic superoxide radicals from QDs. However, the limited deep‐tissue penetration of visible light needed for QD activation, and concern over trace heavy metals, have prevented further translation. Herein, we report two indium phosphide (InP) QDs that operate in the near‐infrared and deep‐red light window, enabling deeper tissue penetration. These heavy‐metal‐free QDs eliminate MDR pathogenic bacteria, while remaining non‐toxic to host human cells. This work provides a pathway for advancing QD nanotherapeutics to combat MDR superbugs.     

Synthesis of single‐core and multiple‐core core‐shell nanoparticles by RAFT emulsion polymerization: Lead sulfide‐copolymer nanocomposites

We report here a simple and direct route for the preparation of lead sulfide (PbS) quantum dots (QDs) embedded into polymeric nanospheres by emulsion polymerization. In this process, QDs are first dispersed in an aqueous solution containing a statistical oligomer constituted of five butyl acrylate and ten acrylic acid units prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using a trithiocarbonate as RAFT agent. Then, the dispersion of PbS QDs is engaged into an emulsion polymerization process to form core‐shell nanoparticles. Transmission electron microscopy reveals the presence of single‐core core‐shell particles at low concentration of PbS QD, whereas multiple‐core core‐shell particles containing either well separated or aggregated PbS QDs are formed at high concentration of PbS QDs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The Influence of Surface Modification on the Photoluminescence of CdTe Quantum Dots: Realization of Bio‐Imaging via Cost‐Effective Polymer

To impart biocompatibility, stability, and specificity to quantum dots (QDs)—and to reduce their toxicity—it is essential to carry out surface modification. However, most surface‐modification processes are costly, complicated, and time‐consuming. In addition, the modified QDs often have a large size, which leads to easy aggregation in biological environments, making it difficult to excrete them from in vivo systems. To solve these problems, three kinds of conventional polymers, namely, polyvinyl alcohol (PVA, neutral), sodium polystyrene sulfonate (PSS, negative charged), and poly(diallyl dimethyl ammonium chloride) (PDDA, positive charged) were selected to modify the surface of QDs at low cost via a simple process in which the size of the QDs was kept small after modification. The effect of polymer modification on the photoluminescence (PL) properties of the QDs was systematically investigated. High quantum yields (QYs) of 65 % were reached, which is important for the realization of bio‐imaging. Then, the cytotoxicity of CdTe QD–polymer composites was systematically investigated via MTT assay using the Cal27 and HeLa cell lines, especially for high concentrations of QD–polymer composites in vitro. The experimental results showed that the cytotoxicity decreased in the order CdTe‐PDDA>CdTe>CdTe‐PSS>CdTe‐PVA, indicating that PSS and PVA can reduce the toxicity of the QDs. An obvious cytotoxicity of CdTe‐PVA and CdTe‐PSS was present until 120 h for the Cal27 cell line and until 168 h for the HeLa cell line. At last, the Cal27 cell line was selected to realize bio‐imaging using CdTe‐PSS and CdTe‐PVA composites with different emission colors under one excitation wavelength.     

Tuning Optical Properties of Si Quantum Dots by π‐Conjugated Capping Molecules

The absorption and photoluminescence (PL) properties of silicon quantum dots (QDs) are greatly influenced by their size and surface chemistry. Herein, we examined the optical properties of three Si QDs with increasing σ–π conjugation length: octyl‐, (trimethylsilyl)vinyl‐, and 2‐phenylvinyl‐capped Si QDs. The PL photon energy obtained from as‐prepared samples decreased by 0.1–0.3 eV, while the PL excitation (PLE) extended from 360 nm (octyl‐capped Si QDs) to 400 nm (2‐phenylvinyl‐capped Si QDs). A vibrational PL feature was observed in all samples with an energy separation of about 0.192±0.013 eV, which was explained based on electron–phonon coupling. After soft oxidization through drying, all samples showed blue PL with maxima at approximately 410 nm. A similar high‐energy peak was observed with the bare Si QD sample. The changes in the optical properties of Si QDs were mainly explained by the formation of additional states arising from the strong σ–π conjugation and QD oxidation.     

High‐density quantum dots composites and its photolithographic patterning applications

With the growing interest in quantum dots (QDs), many applications are emerging recently. In particular, the display industry has shown widespread interest in using QDs as the next generation colorants. One application is to replace conventional color filters with QD‐based color conversion films to significantly improve color purity and luminous efficiency. However, QD blending which is capable of photolithographic patterning is a very challenging problem due to its low dispersion property and aggregations in polar medias. Herein, we report a photo‐patternable QD dispersion that can produce fine patterns through a photolithography process. First, the QDs dispersed in a nonpolar solvent, for example, chloroform or hexane, were separated and dried to obtain a QD powder. And then, the dispersion characteristics of the QD powders were investigated after mixing commercial dispersants and UV curable oligomers. Furthermore, the QD dispersion was investigated up to 30 wt.% of QDs by mixing with various commercial additives. We have studied the optical property changes of QDs during the photocuring process and the heating process prior to actual application. And, we have studied the surface characteristics of the fine QDs patterns after patterning process. As a result, it was confirmed that QDs are able to be well dispersed up to 30 wt.%.     

CuO Quantum‐Dot‐Sensitized Mesoporous ZnO for Visible‐Light Photocatalysis

How to extend ultraviolet photocatalysts to the visible‐light region is a key challenge for solar‐driven photocatalysis. Herein, we show that ultraviolet ZnO photocatalysts can present high visible‐light photocatalytic activity when combined with CuO quantum dots (QDs; <3 nm). Theoretical analysis demonstrates that the quantum size effect plays a key role in the photoactivity of the CuO/ZnO composite. For CuO QDs smaller than 3 nm, the separated charges could transfer from CuO QDs to the conduction bands of ZnO due to quantum splitting of the CuO energy level and phonon compensation for the difference in the conduction band minimum of CuO and ZnO; however, this process would not occur with the disappearance of the quantum size effect. Further structural analysis demonstrates that interfacial charge separation and transfer between ZnO and CuO dominate the photocatalytic processes instead of a single CuO or ZnO surface. Compared with ZnO? noble metal structures (e.g., ZnO? Ag or ZnO? Au), these ZnO? CuO QD composites present wider absorption bands, higher visible photocatalytic efficiencies, and lower costs.     

Photoluminescence Quenching in Self‐Assembled CsPbBr3 Quantum Dots on Few‐Layer Black Phosphorus Sheets

An ordered self‐assembly of CsPbBr₃ quantum dots (QDs) was generated on the surface of few‐layer black phosphorus (FLBP). Strong quenching of the QD fluorescence was observed, and analyzed by time‐resolved photoluminescence (TR‐PL) studies, DFT calculations, and photoconductivity measurements. Charge transfer by type I band alignment is suggested to be the cause of the observed effects.     

Macroscopic Responsive Liquid Quantum Dots Constructed via Pillar[5]arene‐Based Host‐Guest Interactions

Liquid quantum dots (QDs) have been used as a fluorescent films sensor. Constructing a macroscopic, responsive, liquid QD system for lysine (Lys) is a challenging task. To achieve a selective macroscopic response towards Lys, herein we present a new strategy for integrating host–guest chemistry into a liquid QD system. Water‐soluble pillar[5]arene WP5 was designed and synthesized as a host. WP5 was introduced onto the surface of PEG1810‐modified QDs by host–guest interactions to obtain liquid WP5‐1810‐QDs. The interaction between WP5 and Lys is stronger than that between WP5 and PEG‐1810, causing WP5 to be released from the 1810‐QDs surface in the presence of Lys, resulting in macroscopic fluorescence quenching. This smart material shows promise in amino acid sensing and separation.     

Turn‐On Luminescent Probes for the Real‐Time Monitoring of Endogenous Hydroxyl Radicals in Living Cells

The utilization of semiconductor quantum dots (QDs) as optical labels for biosensing and biorecognition has made substantial progress. However, the development of a suitable QD‐based luminescent probe that is capable of detecting individual reactive oxygen species (ROS) represents a great challenge, mainly because the fluorescence of QDs is quenched by a wide variety of ROS. To overcome this limitation, a novel QD‐based turn‐on luminescent probe for the specific detection of ^.OH has been designed, and its application in monitoring the endogenous release of ^.OH species in living cells is demonstrated. Metal citrate complexes on the surfaces of the QDs can act as electron donors, injecting electrons into the LUMO of the QDs, while ^.OH can inject holes into the HOMO of the QDs. Accordingly, electron–hole pairs are produced, which could emit strong luminescence by electron–hole recombination. Importantly, this luminescent probe does not respond to other ROS.     

DNA‐Programmed Dynamic Assembly of Quantum Dots for Molecular Computation

Despite the widespread use of quantum dots (QDs) for biosensing and bioimaging, QD‐based bio‐interfaceable and reconfigurable molecular computing systems have not yet been realized. DNA‐programmed dynamic assembly of multi‐color QDs is presented for the construction of a new class of fluorescence resonance energy transfer (FRET)‐based QD computing systems. A complete set of seven elementary logic gates (OR, AND, NOR, NAND, INH, XOR, XNOR) are realized using a series of binary and ternary QD complexes operated by strand displacement reactions. The integration of different logic gates into a half‐adder circuit for molecular computation is also demonstrated. This strategy is quite versatile and straightforward for logical operations and would pave the way for QD‐biocomputing‐based intelligent molecular diagnostics.     

High‐Performance Förster Resonance Energy Transfer (FRET)‐Based Dye‐Sensitized Solar Cells: Rational Design of Quantum Dots for Wide Solar‐Spectrum Utilization

High‐performance Förster resonance energy transfer (FRET)‐based dye‐sensitized solar cells (DSSCs) have been successfully fabricated through the optimized design of a CdSe/CdS quantum‐dot (QD) donor and a dye acceptor. This simple approach enables quantum dots and dyes to simultaneously utilize the wide solar spectrum, thereby resulting in high conversion efficiency over a wide wavelength range. In addition, major parameters that affect the FRET interaction between donor and acceptor have been investigated including the fluorescent emission spectrum of QD, and the content of deposited QDs into the TiO₂ matrix. By judicious control of these parameters, the FRET interaction can be readily optimized for high photovoltaic performance. In addition, the as‐synthesized water‐soluble quantum dots were highly dispersed in a nanoporous TiO₂ matrix, thereby resulting in excellent contact between donors and acceptors. Importantly, high‐performance FRET‐based DSSCs can be prepared without any infrared (IR) dye synthetic procedures. This novel strategy offers great potential for applications of dye‐sensitized solar cells.     

DNA‐Templated Assembly of a Heterobivalent Quantum Dot Nanoprobe For Extra‐ and Intracellular Dual‐Targeting and Imaging of Live Cancer Cells

Quantum dots (QDs) hold great promise for the molecular imaging of cancer because of their superior optical properties. Although cell‐surface biomarkers can be readily imaged with QDs, non‐invasive live‐cell imaging of critical intracellular cancer markers with QDs is a great challenge because of the difficulties in the automatic delivery of QD probes to the cytosol and the ambiguity of intracellular targeting signals. Herein, we report a new type of DNA‐templated heterobivalent QD nanoprobes with the ability to target and image two spatially isolated cancer markers (nucleolin and mRNA) present on the cell surface and in the cell cytosol. Bypassing endolysosomal sequestration, this type of QD nanoprobes undergo macropinocytosis following the nucleolin targeting and then translocate to the cytosol for mRNA targeting. Fluorescence resonance energy transfer (FRET) based confocal microscopy enables unambiguous signal deconvolution of mRNA‐targeted QD nanoprobes inside cancer cells.     

Capillary electrophoretic studies on quantum dots and histidine appended peptides self‐assembly

Herein, we designed four peptides appended with different numbers of histidine (His_n‐peptide). We launched a systematic investigation on quantum dots (QDs) and His_n‐peptide self‐assembly in solution using fluorescence coupled CE (CE‐FL). The results indicated that CE‐FL was a powerful method to probe how ligands interaction on the surface of nanoparticles. The self‐assembly of QDs and peptide was determined by the numbers of histidine. We also observed that longer polyhistidine tags (n ≤ 6) could improve the self‐assembly efficiency. Furthermore, the formation and separation of QD‐peptide assembly were also studied by CE‐FL inside a capillary. The total time for the mixing, self‐assembly, separation, and detection was less than 10 min. Our method greatly expands the application of CE‐FL in QDs‐based biolabeling and bioanalysis.