Reductant-directed formation of PS-PAMAM-supported gold nanoparticles for use as highly active and recyclable catalysts for the aerobic oxidation of alcohols and the homocoupling of phenylboronic acids

Polystyrene-polyamidoamine-supported gold nanoparticles were prepared using a reductant-directed formation strategy. The resulting catalysts exhibited excellent activities in the aerobic oxidation of benzyl alcohols and the homocoupling of phenylboronic acids under mild conditions and can be recycled at least 14 times without significant loss of activity.     

Synthesis of Highly Stable,Water‐Dispersible Copper Nanoparticles as Catalysts for Nitrobenzene Reduction

We report an aqueous‐phase synthetic route to copper nanoparticles (CuNPs) using a copper–surfactant complex and tests of their catalytic efficiency for a simple nitrophenol reduction reaction under atmospheric conditions. Highly stable, water‐dispersed CuNPs were obtained with the aid of polyacrylic acid (PAA), but not with other dispersants like surfactants or polymethacrylic acid (PMAA). The diameter of the CuNPs could be controlled in the range of approximately 30–85 nm by modifying the ratio of the metal precursor to PAA. The catalytic reduction of p‐nitrophenol to p‐aminophenol takes place at the surface of CuNPs at room temperature and was accurately monitored by UV/Vis spectroscopy. The catalytic efficiency was found to be remarkably high for these PAA‐capped CuNPs, given the fact that at the same time PAA is efficiently preventing their oxidation as well. The activity was found to increase as the size of the CuNPs decreased. It can therefore be concluded that the synthesized CuNPs are catalytically highly efficient in spite of the presence of a protective PAA coating, which provides them with a long shelf life and thereby enhances the application potential of these CuNPs.     

Metal–Support Cooperative Catalysts for Environmentally Benign Molecular Transformations

Metal–support cooperative catalysts have been developed for sustainable and environmentally benign molecular transformations. The active metal centers and supports in these catalysts could cooperatively activate substrates, resulting in high catalytic performance for liquid‐phase reactions under mild conditions. These catalysts involved hydrotalcite‐supported gold and silver nanoparticles with high catalytic activity for organic reactions such as aerobic oxidation, oxidative carbonylation, and chemoselective reduction of epoxides to alkenes and nitrostyrenes to aminostyrenes using alcohols and CO/H₂O as reducing reagents. This high catalytic performance was due to cooperative catalysis between the metal nanoparticles and basic sites of the hydrotalcite support. To increase the metal–support cooperative effect, core–shell nanostructured catalysts consisting of gold or silver nanoparticles in the core and ceria supports in the shell were designed. These core–shell nanocomposite catalysts were effective for the chemoselective hydrogenation of nitrostyrenes to aminostyrenes, unsaturated aldehydes to allyl alcohols, and alkynes to alkenes using H₂ as a clean reductant. In addition, these solid catalysts could be recovered easily from the reaction mixture by simple filtration, and were reusable with high catalytic activity.     

Comparative study of amphiphilic hyperbranched and linear polymer stabilized organo‐soluble gold nanoparticles as efficient recyclable catalysts in the biphasic reduction of 4‐nitrophenol

A series of organo‐soluble spherical gold nanoparticles (AuNPs) were prepared through the reduction of HAuCl₄ by NaBH₄ in the presence of amphiphilic hyperbranched polymers that had a hydrophilic hyperbranched polyethylenimine core and a hydrophobic shell formed by many palmitamide (C16) chains. For comparison, the corresponding linear polymeric analog derived from linear polyethylenimine was also used to prepare the organo‐soluble AuNPs. The obtained AuNPs were characterized by transmission electron microscopy. It was found that higher feed ratio of polymer to HAuCl₄ and utilization of polymers with higher C16 density usually resulted in smaller AuNPs with relatively lower polydispersity. Except of the polymer having the pronounced low molecular weight, the molecular weight and the morphology of the amphiphilic polymers had almost no obvious effect on the size of the formed AuNPs. These organo‐soluble AuNPs could be used as efficient catalysts for the biphasic catalytic reduction of 4‐nitrophenol by NaBH₄. Their apparent rate coefficients had correlation with the molecular weight of the used amphiphilic polymers, but were less relevant to the morphology of these polymers. These organo‐soluble AuNPs could be conveniently recovered and reused many times. The morphology of the capping polymers had obvious effect on the lifetime of the AuNPs catalysts in the catalytic reduction of 4‐nitrophenol. Except of the pronounced low molecular weight hyperbranched polymer, the other hyperbranched ones with relatively high molecular weight rendered the AuNPs to have bigger turnover number values than their linear analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Highly Stable,Water‐Dispersible Metal‐Nanoparticle‐Decorated Polymer Nanocapsules and Their Catalytic Applications

A facile synthesis of highly stable, water‐dispersible metal‐nanoparticle‐decorated polymer nanocapsules (M@CB‐PNs: M=Pd, Au, and Pt) was achieved by a simple two‐step process employing a polymer nanocapsule (CB‐PN) made of cucurbit[6]uril (CB[6]) and metal salts. The CB‐PN serves as a versatile platform where various metal nanoparticles with a controlled size can be introduced on the surface and stabilized to prepare new water‐dispersible nanostructures useful for many applications. The Pd nanoparticles on CB‐PN exhibit high stability and dispersibility in water as well as excellent catalytic activity and recyclability in carbon–carbon and carbon–nitrogen bond‐forming reactions in aqueous medium suggesting potential applications as a green catalyst.     

Detection and measurement of surface electron transfer on reduced molybdenum oxides (MoO(x)) and catalytic activities of Au/MoO(x)

The sensing of electrons confined inside surface defect sites has been demonstrated. Tetracyanoethylene was employed as a single-electron acceptor to characterize the reduction of fully oxidized MoO(3) . Electron transfer deposits negative charge on closely contacted gold nanoparticles on the surface, which explains the high catalytic activity in the aerobic oxidation of alcohols.     

Comparison of the Peroxidase‐Like Activity of Unmodified,Amino‐Modified,and Citrate‐Capped Gold Nanoparticles

The origin of the peroxidase‐like activity of gold nanoparticles and the impact of surface modification are studied. Furthermore, some influencing factors, such as fabrication process, redox property of the modifier, and charge property of the substrate, are investigated. Compared to amino‐modified or citrate‐capped gold nanoparticles, unmodified gold nanoparticles show significantly higher catalytic activity toward peroxidase substrates, that is, the superficial gold atoms are a contributing factor to the observed peroxidase‐like activity. The different catalytic activities of amino‐modified and citrate‐capped gold nanoparticles toward 3,3′,5,5′‐tetramethylbenzidine (TMB) and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid) diammonium salt (ABTS) show that the charge characteristics of the nanoparticles and the substrate also play an important role in the catalytic reactions.     

A Study of Heterogeneous Catalysis by Nanoparticle‐Embedded Paper‐Spray Ionization Mass Spectrometry

We have developed nanoparticle‐embedded paper‐spray mass spectrometry for studying three types of heterogeneously catalyzed reactions: 1) Palladium‐nanoparticle‐catalyzed Suzuki cross‐coupling reactions, 2) palladium‐ or silver‐nanoparticle‐catalyzed 4‐nitrophenol reduction, and 3) gold‐nanoparticle‐catalyzed glucose oxidation. These reactions were almost instantaneous on the nanocatalyst‐embedded paper, which subsequently transferred the transient intermediates and products to a mass spectrometer for their detection. This in situ method of capturing transient intermediates and products from heterogeneous catalysis is highly promising for investigating the mechanism of catalysis and rapidly screening catalytic activity under ambient conditions.     

A Simple and Fast Aqueous‐Phase Synthesis of Ultra‐Highly Concentrated Silver Nanoparticles and Their Catalytic Properties

A simple and fast synthetic route to ultra‐highly concentrated silver nanoparticles with long‐term stability by reducing AgNO₃ with ascorbic acid in the presence of polyethyleneimine (PEI) as a stabilizer in an aqueous phase is reported. The concentration of silver precursor was as high as 2000 mm (200 g of Ag nanoparticle per liter of water) and the reaction time was less than 10 min. The resulting silver nanoparticles show long‐term stability after two months of storage at room temperature without any signs of particle aggregation or precipitation in an aqueous phase. The successful ligand exchange of PEI‐stabilized silver nanoparticles to polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) without particle aggregation is also demonstrated. In addition, the catalytic activities of silver nanoparticles stabilized by various stabilizers prepared by the ligand exchange method was investigated. The PEI‐stabilized silver nanoparticles exhibited a higher stability than those of PEG‐ and PVP‐stabilized silver nanoparticles in the diffusion‐controlled catalytic reduction of 4‐nitrophenol to 4‐aminophenol by NaBH₄.     

Aerobic Oxidations Catalyzed by Colloidal Nanogold

Recently, dispersions of gold nanoclusters in liquid media (colloidal nanogold) have been extensively used as quasi‐homogeneous catalysts for various aerobic oxidation reactions. This review describes recent progress in such reactions, with a focus on our comprehensive studies on gold clusters (<2 nm) stabilized by poly(N‐vinyl‐2‐pyrrolidone) and their participation in oxidation reactions of alcohols, α‐hydroxylation reactions of benzylic ketones, and homocoupling reactions of organoboronates, as well as formal Lewis acidic reactions, such as intramolecular hydroalkoxylation and hydroamination reactions of nonactivated alkenes. Mechanistic studies have shown that a partial electron transfer from the gold clusters to O₂ generates superoxide‐ or peroxide‐like species and Lewis acidic centers, both of which play essential roles in the catalytic reactions.     

Porous Silica‐Coated Gold Nanorods: A Highly Active Catalyst for the Reduction of 4‐Nitrophenol

The successful coating of thin porous silica layers of various thicknesses [(10±1), (12±1), and (14±1) nm] on cetyl trimethylammonium bromide (CTAB) capped gold nanorods was achieved through a modified Stöber procedure. The resulting material was applied as a novel catalyst for the reduction of 4‐nitrophenol. The catalytic activities of the gold nanorods increased up to eight times after coating with a layer of porous silica and the reaction followed a zero‐order kinetics, having a rate constant as high as 2.92×10^?1 mol L^?1 min^?1. The spectral changes during the reduction reaction of 4‐nitrophenol were observed within a very short span of time and a complete conversion to 4‐aminophenol occured within 5–6 mins, including the induction period of ≈2 mins. The reusability of the catalyst was studied by running the catalytic reaction during five consecutive cycles with good efficiency without destroying the nanostructure. The methodology can be effectively applied to the development of composite catalysts with highly enhanced catalytic activity.     

Synthesis and characterization of a Ni nanoparticle stabilized on Ionic liquid‐functionalized magnetic Silica nanoparticles for tandem oxidative reaction of primary alcohols

In this research, preparation of the magnetic nanoparticle, coating by a silica shell using (3‐aminopropyl) triethoxysilane and synthesis of a novel sulfonic acid‐substituted imidazolium‐based ionic liquid onto the surface of these particles via a multi‐component reaction, is described. The functionalized nanoparticles was loaded by Ni nanoparticles and characterized by means of techniques such as XRD, FTIR, SEM, EDX, TEM, TGA and ICP‐OES. The nanostructures have spherical shapes that ranged in size from 80 to 100 nm. The catalytic activity of these nanoparticles was tested in aerobic oxidation of primary alcohols that showed good performance in the wide range of primary alcohols in water at mild reaction conditions. As a second step of this work, the tandem oxidative synthesis of alkylacrylonitriles and bisindolylmethanes were investigated using primary alcohols under oxidation conditions. This catalyst system can be recovered using external magnet and reused for five consecutive cycles without significantly less of its activity.     

Supported Au nanoparticles as efficient catalysts for aerobic homocoupling of phenylboronic acid

Au nanoparticles with small sizes (1-4 nm) were effectively formed on Mg-Al mixed oxides (Au/MAO), which showed superior catalytic performances and good recyclability in aerobic homocoupling of phenylboronic acid.     

A TEMPO‐Free Copper‐Catalyzed Aerobic Oxidation of Alcohols

The copper‐catalyzed aerobic oxidation of primary and secondary alcohols without an external N‐oxide co‐oxidant is described. The catalyst system is composed of a Cu/diamine complex inspired by the enzyme tyrosinase, along with dimethylaminopyridine (DMAP) or N‐methylimidazole (NMI). The Cu catalyst system works without 2,2,6,6‐tetramethyl‐l‐piperidinoxyl (TEMPO) at ambient pressure and temperature, and displays activity for un‐activated secondary alcohols, which remain a challenging substrate for catalytic aerobic systems. Our work underscores the importance of finding alternative mechanistic pathways for alcohol oxidation, which complement Cu/TEMPO systems, and demonstrate, in this case, a preference for the oxidation of activated secondary over primary alcohols.     

Mechanism of the Aerobic Homocoupling of Phenylboronic Acid on Au20−: A DFT Study

The mechanism of the gold nanocluster‐catalyzed aerobic homocoupling of arylboronic acids has been elucidated by means of DFT calculations with Au₂₀^? as a model cluster for the Au:[poly(N‐vinylpyrrolidin‐2‐one)] catalyst. We found that oxygen affects the adsorption of phenylboronic acid and, by lowering the energy barrier, a water molecule enhances dissociation of the C?B bond, which is probably the rate‐determining step. The key role of oxygen is in activating the surface of the gold cluster by generating Lewis acidic sites for adsorption and activation of the phenylboronic acid, leading to the formation of biphenyl through a superoxo‐like species. Moreover, the oxygen adsorbed on the Au nanocluster can act as an oxidant for phenylboronic acid, giving phenol as a byproduct. As shown by NBO analysis, the basic aqueous reaction medium facilitates the reductive elimination process by weakening the Au?C bond, thereby enhancing the formation of biphenyl. The coupling of phenyl and reductive elimination of biphenyl occur at the top or facet site with low‐energy‐barrier through spillover of phenyl group on Au NC. The present findings are useful for the interpretation or design of other coupling reactions with Au NC.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Synthesis of gold nanoparticles decorated on sulfonated three‐dimensional graphene nanocomposite and application as a highly efficient and recyclable heterogeneous catalyst for Ullmann homocoupling of aryl iodides and reduction of p‐nitrophenol

Gold nanoparticles were decorated onto sulfonated three‐dimensional graphene (3DG‐SO₃H) through spontaneous chemical reduction of HAuCl₄ by 3DG‐SO₃H. This nanocomposite exhibited excellent catalytic activity for the synthesis of symmetric biaryls via the Ullmann homocoupling of aryl iodides in an aqueous medium. Additionally, this nanocomposite was used as a catalyst for the reduction of p‐nitrophenol to p‐aminophenol. The catalyst could be used more than six times successively without significant deactivation.     

Highly Stable,Water‐Dispersible Metal‐Nanoparticle‐Decorated Polymer Nanocapsules and Their Catalytic Applications

A facile synthesis of highly stable, water‐dispersible metal‐nanoparticle‐decorated polymer nanocapsules (M@CB‐PNs: M=Pd, Au, and Pt) was achieved by a simple two‐step process employing a polymer nanocapsule (CB‐PN) made of cucurbit[6]uril (CB[6]) and metal salts. The CB‐PN serves as a versatile platform where various metal nanoparticles with a controlled size can be introduced on the surface and stabilized to prepare new water‐dispersible nanostructures useful for many applications. The Pd nanoparticles on CB‐PN exhibit high stability and dispersibility in water as well as excellent catalytic activity and recyclability in carbon–carbon and carbon–nitrogen bond‐forming reactions in aqueous medium suggesting potential applications as a green catalyst.     

A Brush‐Gel/Metal‐Nanoparticle Hybrid Film as an Efficient Supported Catalyst in Glass Microreactors

A polymer‐brush‐based material was applied for the formation and in situ immobilization of silver and palladium nanoparticles, as a catalytic coating on the inner wall of glass microreactors. The brush film was grown directly on the microchannel interior by means of atom‐transfer radical polymerization (ATRP), which allows control over the polymer film thickness and therefore permits the tuning of the number of nanoparticles formed on the channel walls. The wide applicability of the catalytic devices is demonstrated for the reduction of 4‐nitrophenol and for the Heck reaction.     

Tea‐Bag‐Like Polymer Nanoreactors Filled with Gold Nanoparticles

Gold‐containing polymer nanotubes, which showed both catalytic activity and resistance to leaching, were prepared by the “tubes by fiber templates” (TUFT) process. For this purpose, electrospun polymer nonwovens with incorporated poly(L ‐lactide)‐stabilized gold nanoparticles were coated with poly(p‐xylylene) by the chemical vapor deposition process, and then the inner fiber templates were removed. The resulting polymer tubes carried encapsulated gold nanoparticles which were shown to be immobilized and featured pronounced catalytic activity towards the hydrolytic oxidation of dimethylphenylsilane and the alcoholysis of dimethylphenylsilane with n‐butanol. The macroscopic nonwovens could be used as tea‐bag‐like catalyst systems and showed excellent reusability.