Understanding the Mechanisms of Unusually Fast HH,CH,and CC Bond Reductive Eliminations from Gold(III) Complexes

Carbon–carbon bond reductive elimination from gold(III) complexes are known to be very slow and require high temperatures. Recently, Toste and co‐workers have demonstrated extremely rapid C?C reductive elimination from cis‐[AuPPh₃(4‐F‐C₆H₄)₂Cl] even at low temperatures. We have performed DFT calculations to understand the mechanistic pathway for these novel reductive elimination reactions. Direct dynamics calculations inclusive of quantum mechanical tunneling showed significant contribution of heavy‐atom tunneling (>25 %) at the experimental reaction temperatures. In the absence of any competing side reactions, such as phosphine exchange/dissociation, the complex cis‐[Au(PPh₃)₂(4‐F‐C₆H₄)₂]⁺ was shown to undergo ultrafast reductive elimination. Calculations also revealed very facile, concerted mechanisms for H?H, C?H, and C?C bond reductive elimination from a range of neutral and cationic gold(III) centers, except for the coupling of sp³ carbon atoms. Metal–carbon bond strengths in the transition states that originate from attractive orbital interactions control the feasibility of a concerted reductive elimination mechanism. Calculations for the formation of methane from complex cis‐[AuPPh₃(H)CH₃]⁺ predict that at ?52 °C, about 82 % of the reaction occurs by hydrogen‐atom tunneling. Tunneling leads to subtle effects on the reaction rates, such as large primary kinetic isotope effects (KIE) and a strong violation of the rule of the geometric mean of the primary and secondary KIEs.     

Computational Insight into Nickel‐Catalyzed Carbon–Carbon versus Carbon–Boron Coupling Reactions of Primary,Secondary, and Tertiary Alkyl Bromides

The nickel‐catalyzed alkyl–alkyl cross‐coupling (C?C bond formation) and borylation (C?B bond formation) of unactivated alkyl halides reported in the literature show completely opposite reactivity orders in the reactions of primary, secondary, and tertiary alkyl bromides. The proposed Ni^I/Ni^III catalytic cycles for these two types of bond‐formation reactions were studied computationally by means of DFT calculations at the B3LYP level. These calculations indicate that the rate‐determining step for alkyl–alkyl cross‐coupling is the reductive elimination step, whereas for borylation the rate is determined mainly by the atom‐transfer step. In borylation reactions, the boryl ligand involved has an empty p orbital, which strongly facilitates the reductive elimination step. The inability of unactivated tertiary alkyl halides to undergo alkyl–alkyl cross‐coupling is mainly due to the moderately high reductive elimination barrier.     

Kinetic Studies on the Palladium(II)‐Catalyzed Oxidative Cross‐Coupling of Thiophenes with Arylboron Compounds and Their Mechanistic Implications

Reaction orders for the key components in the palladium(II)‐catalyzed oxidative cross‐coupling between phenylboronic acid and ethyl thiophen‐3‐yl acetate were obtained by the method of initial rates. It turned out that the reaction rate not only depended on the concentration of palladium trifluoroacetate (reaction order: 0.97) and phenylboronic acid (reaction order: 1.26), but also on the concentration of the thiophene (reaction order: 0.55) and silver oxide (reaction order: ?1.27). NMR spectroscopy titration studies established the existence of 1:1 complexes between the silver salt and both phenylboronic acid and ethyl thiophen‐3‐yl acetate. A low inverse kinetic isotope effect (k_H/k_D=0.93) was determined upon employing the 4‐deuterated isotopomer of ethyl thiophen‐3‐yl acetate and monitoring its reaction to the 4‐phenyl‐substituted product. A Hammett analysis performed with para‐substituted 2‐phenylthiophenes gave a negative ρ value for oxidative cross‐coupling with phenylboronic acid. Based on the kinetic data and additional evidence, a mechanism is suggested that invokes transfer of the phenyl group from phenylboronic acid to a 1:1 complex of palladium trifluoroacetate and thiophene as the rate‐determining step. Proposals for the structure of relevant intermediates are made and discussed.     

Binding property and structure of aromatic isocyanide self‐assembly monolayers on Ag and Au surfaces

The binding property of p‐biphenyl isocyanide self‐assembled monolayers (SAMs) on Au and Ag was investigated by temperature‐dependent surface‐enhanced Raman spectroscopy (SERS). p‐Biphenyl isocyanide was found to desorb on Ag at a low temperature of ～393 K whereas it appeared to remain enduring at a high temperature of ～453 K for Au. Structures of p‐biphenyl isocyanide SAMs on Au and Ag flat films were checked by means of near‐edge x‐ray absorption fine structure spectroscopy (NEXAFS) at the two different normal (90° ) and grazing (20° ) angles of the incident x‐ray beam. Our results suggested that the SAMs prepared by p‐biphenyl isocyanide should have a relatively disordered structure even at room temperature on both Au and Ag, as indicated from an insubstantial change in NEXAFS spectra at the two different angles from those of p‐biphenyl thiolate and p‐biphenyl methanethiolate. The weakness of the isocyanide–metal bond in comparison with the sulphur–metal bond may result in both low surface coverage and orientational disorder. A density functional theory calculation method was employed to attempt to explain the difference in stability for phenyl isocyanide on Ag and Au surfaces. Our calculation result yielded a lower binding energy of phenyl isocyanide on Ag than that on Au, consistent with the temperature‐dependent Raman results. Copyright © 2005 John Wiley & Sons, Ltd.     

Exploring Regioselective Bond Cleavage and Cross‐Coupling Reactions using a Low‐Valent Nickel Complex

Recently, esters have received much attention as transmetalation partners for cross‐coupling reactions. Herein, we report a systematic study of the reactivity of a series of esters and thioesters with [{(dtbpe)Ni}₂(μ‐η²:η²‐C₆H₆)] (dtbpe=1,2‐bis(di‐tert‐butyl)phosphinoethane), which is a source of (dtbpe)nickel(0). Trifluoromethylthioesters were found to form η²‐carbonyl complexes. In contrast, acetylthioesters underwent rapid C_acyl?S bond cleavage followed by decarbonylation to generate methylnickel complexes. This decarbonylation could be pushed backwards by the addition of CO, allowing for regeneration of the thioester. Most of the thioester complexes were found to undergo stoichiometric cross‐coupling with phenylboronic acid to yield sulfides. While ethyl trifluoroacetate was also found to form an η²‐carbonyl complex, phenyl esters were found to predominantly undergo C_aryl?O bond cleavage to yield arylnickel complexes. These could also undergo transmetalation to yield biaryls. Attempts to render the reactions catalytic were hindered by ligand scrambling to yield nickel bis(acetate) complexes, the formation of which was supported by independent syntheses. Finally, 2‐naphthyl acetate was also found to undergo clean C_aryl?O bond cleavage, and although stoichiometric cross‐coupling with phenylboronic acid proceeded with good yield, catalytic turnover has so far proven elusive.     

The Mechanism of NO Bond Cleavage in Rhodium‐Catalyzed CH Bond Functionalization of Quinoline N‐oxides with Alkynes: A Computational Study

Metal‐catalyzed C?H activation not only offers important strategies to construct new bonds, it also allows the merge of important research areas. When quinoline N‐oxide is used as an arene source in C?H activation studies, the N?O bond can act as a directing group as well as an O‐atom donor. The newly reported density functional theory method, M11L, has been used to elucidate the mechanistic details of the coupling between quinoline N?O bond and alkynes, which results in C?H activation and O‐atom transfer. The computational results indicated that the most favorable pathway involves an electrophilic deprotonation, an insertion of an acetylene group into a Rh?C bond, a reductive elimination to form an oxazinoquinolinium‐coordinated Rh^I intermediate, an oxidative addition to break the N?O bond, and a protonation reaction to regenerate the active catalyst. The regioselectivity of the reaction has also been studied by using prop‐1‐yn‐1‐ylbenzene as a model unsymmetrical substrate. Theoretical calculations suggested that 1‐phenyl‐2‐quinolinylpropanone would be the major product because of better conjugation between the phenyl group and enolate moiety in the corresponding transition state of the regioselectivity‐determining step. These calculated data are consistent with the experimental observations.     

Interaction of dioxygen with the platinum Pt19/SnO2/H2 cluster: DFT calculation

The adsorption of the O₂ molecule onto the surface of the Pt₁₉ platinum cluster deposited onto the tin dioxide crystal surface in the presence of dissociated hydrogen molecule has been calculated by the density functional theory method within the generalized gradient approximation (GGA-PBE) with periodic boundary conditions and a projector-augmented plane-wave (PAW) basis set. It has been demonstrated that the oxygen molecule can be adsorbed without a barrier onto the free surface of the Pt₁₉/SnO₂/H₂ cluster to form a superoxy isomer with one Pt-O bond (the energy of elimination of the oxygen molecule is 0.75 eV), which converts almost without a barrier to more stable peroxide isomers with two Pt-O bonds (the energy of elimination of the O₂ molecule is 1.2?1.7 eV). The energy of elimination of the oxygen molecule from the isomers with two-coordinated oxygen positions at the cluster edges is 2.10?2.53 eV. The isomers with mono- and tricoordinated oxygen positions are less energetically favorable than the isomers with two-coordinated oxygen positions. The process of addition of the oxygen molecule to the platinum cluster and elimination of the water molecule formed in the reaction Pt₁₉/SnO₂/H₂ + O₂ → Pt₁₉/SnO₂/O + H₂O is energetically favorable by 1.6 eV.     

Thermal Conversion of Methane to Formaldehyde Promoted by Gold in AuNbO3+ Cluster Cations

In addition to generation of a methyl radical, formation of a formaldehyde molecule was observed in the thermal reaction of methane with AuNbO₃⁺ heteronuclear oxide cluster cations. The clusters were prepared by laser ablation and mass‐selected to react with CH₄ in an ion‐trap reactor under thermal collision conditions. The reaction was studied by mass spectrometry and DFT calculations. The latter indicated that the gold atom promotes formaldehyde formation through transformation of an Au?O bond into an Au?Nb bond during the reaction.     

Gold‐Catalyzed Allylation of Aryl Boronic Acids: Accessing Cross‐Coupling Reactivity with Gold

A sp³–sp² C? C cross‐coupling reaction catalyzed by gold in the absence of a sacrificial oxidant is described. Vital to the success of this method is the implementation of a bimetallic catalyst bearing a bis(phosphino)amine ligand. A mechanistic hypothesis is presented, and observable transmetalation, C? Br oxidative addition, and C? C reductive elimination in a model gold complex are shown. We expect that this method will serve as a platform for the development of novel transformations involving redox‐active gold catalysts.     

Adsorption of polyfunctional 5‐fluorouracil and 2,4‐dithio‐5‐fluorouracil on Au(111) surface: Structure,energy, and electronic transmission

Adsorption of 5‐fluorouracil (5‐FU) and 2,4‐dithio‐5‐fluorouracil (2,4‐DT‐5‐FU) on Au(111) surface at low coverage is studied by using periodic‐slab‐density functional theory calculation. Isolated 5‐FU molecule adsorbs preferentially at bridge site in a vertical configuration via N? H group by forming the N? H···Au nonconventional H‐bond. The formation of the anchor Au? O bond is not observed. Substitution of oxygen atoms of 5‐FU with sulfur strongly influences the nature of adsorption and leads to the Au? S anchor bond and the N? H···Au nonconventional H‐bond of single 2,4‐DT‐5‐FU molecule on Au(111) surface. The adsorption site and orientation of 2,4‐DT‐5‐FU molecule on the surface are similar to those of 5‐FU. The metal–molecule coupling effects at asymmetric Au/S(N? H)S/mol/C? H/Au and Au/N? H/mol/O/Au transport junctions and symmetric Au/S(N? H)S/mol/mol/S(N? H)S/Au and Au/O/mol/mol/O/Au transport junctions are also investigated. The electronic structure is analyzed in detail, and the obtained results are used for illustrating the electron transmission in metal–molecule–metal systems. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Au(111)表面上乙醇选择性氧化反应机理的密度泛函理论研究(英文)

采用密度泛函理论研究了吸附有O原子的Au(111)表面上乙醇选择性氧化的反应机理.反应结果表明,除O原子和中间产物二齿醋酸根(CH3CHOO)外,其他中间产物在Au(111)表面扩散能垒均较低,不会对反应速控步骤的确定造成影响.乙醇羟基氧化脱氢为反应的第一步骤,当氧化剂为吸附态的O原子或者为OH基时,反应活化能分别为0.20和0.17eV.氧化产物乙氧基(CH3CH2O)进一步氧化脱氢生成乙醛则需要表面吸附的O原子或另一表面吸附的OH基的参与,所需活化能为0.29或0.27eV.同时,乙醛易与表面吸附的乙氧基反应生成乙氧基半缩醛(CH3CHOOC2H5),其可进一步与O原子作用,脱氢形成乙酸乙酯.此外,在乙醛深度氧化成酸的过程中需要克服较高的反应能垒,因而在表面反应温度较低时无法进行,这与实验结果相符.     

Synthesis of α‐(Fluorophenyl)pyridine by Palladium‐Catalyzed Cross‐Coupling Reaction

A series of α‐(fluoro‐substituted phenyl)pyridines have been synthesized by means of a palladium‐catalyzed cross‐coupling reaction between fluoro‐substituted phenylboronic acid and 2‐bromopyridine or its derivatives. The reactivities of the phenylboronic acids containing di‐ and tri‐fluoro substituents with α‐pyridyl bromide were investigated in different catalyst systems. Unsuccessful results were observed in the Pd/C and PPh₃ catalyst system due to phenylboronic acid containing electron‐withdrawing F atom(s). For the catalyst system of Pd(OAc)₂/PPh₃, the reactions gave moderate yields of 55% –80%, meanwhile, affording 10% –20% of dimerisation (self‐coupling) by‐products, but trace products were obtained in coupling with 2,4‐difluorophenylboronic acids because of steric hinderance. Pd(PPh₃)₄ was more reactive for boronic acids with sterically hindering F atom(s), and the coupling reactions gave good yields of 90% and 91% without any self‐coupling by‐product.     

Synthesis of Stable Diarylpalladium(II) Complexes: Detailed Study of the Aryl–Aryl Bond‐Forming Reductive Elimination

The synthesis of diarylpalladium(II) complexes by twofold aryl C?H bond activation was developed. These intermediates of oxidative cyclization reactions are stabilized by chelation with acetyl groups while still maintaining sufficient reactivity to study their reductive elimination. Four distinct triggers were found for the reductive elimination of these complexes to dibenzofurans and carbazoles. Thermal elimination occurs at very high temperatures, whereas ligand‐promoted and oxidatively induced reductive eliminations proceed readily at room temperature. Under these conditions, no isomerization occurs. In contrast, weak Brønsted acids, such as acetic acid, lead to a sequence of proto‐demetalation, isomerization to a κ³‐diarylpalladium(II) complex, and reductive elimination to non‐symmetrical cyclization products.     

Ag/Au Mixed Sites Promote Oxidative Coupling of Methanol on the Alloy Surface

Nanoporous gold, a dilute alloy of Ag in Au, activates molecular oxygen and promotes the oxygen‐assisted catalytic coupling of methanol. Because this trace amount of Ag inherent to nanoporous gold has been proposed as the source of oxygen activation, a thin film Ag/Au alloy surface was studied as a model system for probing the origin of this reactivity. Thin alloy layers of Ag_xAu_1?x, with 0.15≤x≤0.40, were examined for dioxygen activation and methanol self‐coupling. These alloy surfaces recombine atomic oxygen at different temperatures depending on the alloy composition. Total conversion of methanol to selective oxidation products, that is, formaldehyde and methyl formate, was achieved at low initial oxygen coverage and at low temperature. Reaction channels for methyl formate formation occurred on both Au and Au/Ag mixed sites with a ratio, as was predicted from the local 2‐dimensional composition.     

Exploring Bis(cyclometalated) Ruthenium(II) Complexes as Active Catalyst Precursors: Room‐Temperature Alkene–Alkyne Coupling for 1,3‐Diene Synthesis

Described is the development of a new class of bis(cyclometalated) ruthenium(II) catalyst precursors for C? C coupling reactions between alkene and alkyne substrates. The complex [(cod)Ru(3‐methallyl)₂] reacts with benzophenone imine or benzophenone in a 1:2 ratio to form bis(cyclometalated) ruthenium(II) complexes ( 1 ). The imine‐ligated complex 1 a promoted room‐temperature coupling between acrylic esters and amides with internal alkynes to form 1,3‐diene products. A proposed catalytic cycle involves C? C bond formation by oxidative cyclization, β‐hydride elimination, and C? H bond reductive elimination. This Ru^II/Ru^IV pathway is consistent with the observed catalytic reactivity of 1 a for mild tail‐to‐tail methyl acrylate dimerization and for cyclobutene formation by [2+2] norbornene/alkyne cycloaddition.     

A DFT Study on the Conversion of Aryl Iodides to Alkyl Iodides: Reductive Elimination of R−I from Alkylpalladium Iodide Complexes with Accessible β‐Hydrogens

DFT calculations have been performed on the palladium‐catalyzed carboiodination reaction. The reaction involves oxidative addition, alkyne insertion, C?N bond cleavage, and reductive elimination. For the alkylpalladium iodide intermediate, LiOtBu stabilizes the intermediate in non‐polar solvents, thus promoting reductive elimination and preventing β‐hydride elimination. The C?N bond cleavage process was explored and the computations show that PPh₃ is not bound to the Pd center during this step. Experimentally, it was demonstrated that LiOtBu is not necessary for the oxidative addition, alkyne insertion, or C?N bond cleavage steps, lending support to the conclusions from the DFT calculations. The turnover‐limiting steps were found to be C?N bond cleavage and reductive elimination, whereas oxidative addition, alkyne insertion, and formation of the indole ring provide the driving force for the reaction.     

Colloidal gold nanoparticles as catalyst for carbon-carbon bond formation: application to aerobic homocoupling of phenylboronic acid in water

Gold nanoparticles (<2 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NPs) were prepared by reduction of AuCl4- with NaBH4 in the presence of PVP and characterized via an array of methods including optical absorption spectroscopy, transmission electron microscopy, X-ray diffraction, X-ray absorption near-edge structure, extended X-ray absorption fine structure, and X-ray photoelectron spectroscopy. We demonstrate for the first time that the Au:PVP NPs act as catalyst toward homocoupling of phenylboronic acid in water under aerobic conditions. Suppression of biphenyl formation under anaerobic conditions indicates that molecular oxygen dissolved in water is intimately involved in the coupling reactions. A mechanism of the aerobic homocoupling catalyzed by the Au:PVP NPs is proposed on the basis of a crucial role of dissolved oxygen, steric effects on the product yields, and the well-established mechanism for the Pd(II)-based catalysts.     

Adsorption of small molecules on helical gold nanorods: A relativistic density functional study

We study the adsorption of a variety of small molecules on helical gold nanorods using relativistic density functional theory. We focus on Au₄₀ which consists of a central linear strand of five gold atoms with seven helical strands of five gold atoms on a coaxial tube. All molecules preferentially adsorb at a single low‐coordinated gold atom on the coaxial tube at an end of Au₄₀. In most cases, there is significant charge transfer (CT) between Au₄₀ and the adsorbate, for CO and NO₂, there is CT from the Au₄₀ to adsorbate while for all other molecules there is CT from the adsorbate to Au₄₀. Thus, Au₄₀‐adsorbate can be described as a donor–accepter complex and we use charge decomposition analysis to better understand the adsorption process. We determine the adsorption energy order to be C₅H₅N >NO₂ > CO > NH₃ > CH₂?CH₂ > CH₂?CH? CHO > NO > HC?CH > H₂S > SO₂ > HCN > CH₃OH > H₂C?O > O₂ > H₂O > CH₄ > N₂. We find that the Au? C, Au? N, Au? S, and Au? O bonds are surprisingly strong, with clear implications for reactivity enhancement of the adsorbate. The Au? H bond is relatively weak but, for interactions via an H atom that is bonded to a carbon atom (e.g., CH₄), we find that there is large charge polarization of the Au? H? C moiety and partial activation of the inert C? H bond. Although the Au? S and Au? O bonds are generally weaker than the Au? C and Au? N bonds, we find that adsorption of H₂S or H₂O causes greater distortion of Au₄₀ in the binding region. However, the degree of distortion is small and the helical structure is retained, demonstrating the stability of the helical Au₄₀ nanorod under perturbations. © 2014 Wiley Periodicals, Inc.     

Cooperative Reductive Elimination: The Missing Piece in the Oxidative‐Coupling Mechanistic Puzzle

The reaction between benzoic acid and methylphenylacetylene to form an isocoumarin is catalyzed by Cp*Rh(OAc)₂ in the presence of Cu(OAc)₂(H₂O) as an oxidant and a leading example of oxidative‐coupling reactions. Its mechanism was elucidated by DFT calculations with the B97D functional. The conventional mechanism, with separate reductive‐elimination and reoxidation steps, was found to yield a naphthalene derivative as the major product by CO₂ extrusion, contradicting experimental observations. The experimental result was reproduced by an alternative mechanism with a lower barrier: In this case, the copper acetate oxidant plays a key role in the reductive‐elimination step, which takes place through a transition state containing both rhodium and copper centers. This cooperative reductive‐elimination step would not be accessible with a generic oxidant, which, again, is in agreement with available experimental data.     

Gas‐Phase Energetics of Reductive Elimination from a Palladium(II) N‐Heterocyclic Carbene Complex

Energy‐resolved collision‐induced dissociation experiments using tandem mass spectrometry are reported for an phenylpalladium N‐heterocyclic carbene (NHC) complex. Reductive elimination of an NHC ligand as a phenylimidazolium ion involves a barrier of 30.9(14) kcal mol^?1, whereas competitive ligand dissociation requires 47.1(17) kcal mol^?1. The resulting three‐coordinate palladium complex readily undergoes reductive C? C coupling to give the phenylimidazolium π complex, for which the binding energy was determined to be 38.9(10) kcal mol^?1. Density functional calculations at the M06‐L//BP86/TZP level of theory are in very good agreement with experiment. In combination with RRKM modeling, these results suggest that the rate‐determining step for the direct reductive elimination process switches from the C? C coupling step to the fragmentation of the resulting σ complex at low activation energy.