Stability and solution concentration enhancement of resveratrol by solid dispersion in cellulose derivative matrices

Resveratrol is a highly biologically active phytoalexin, found in many plant materials that are common elements of the human diet, such as grapes, nuts, and red wine. The therapeutic or disease preventative potential of this natural polyphenolic antioxidant has been limited in part due to its poor aqueous solubility and low oral bioavailability. We hypothesized that solid dispersion of resveratrol (Res) in cellulose derivative matrices might afford amorphous dispersions, from which supersaturated Res solutions would be produced in the human gastrointestinal (GI) tract, resulting in higher Res bioavailability. We carried out structure–property studies employing cellulose esters with a range of physical characteristics but possessing features suitable for use in amorphous solid dispersions: carboxymethylcellulose acetate butyrate (CMCAB), hydroxypropylmethylcellulose acetate succinate (HPMCAS) and cellulose acetate adipate propionate (CAAdP). The cellulose derivative results were compared with those of a negative control, pure crystalline Res, and a positive control, Res/poly(vinylpyrrolidinone) (PVP). Solid dispersions were characterized by powder X-ray diffraction (XRPD), modulated differential scanning calorimetry (MDSC), nuclear magnetic resonance (NMR) and Fourier transform infrared spectroscopy (FT-IR) of solid dispersions. HPMCAS and PVP solid dispersions afforded faster and more complete Res release at pH 6.8; however Res is also released from PVP matrices at pH 1.2. The carboxyl-containing cellulose derivatives release Res to only a small extent at pH 1.2. This combination of solution and solid phase stabilization against crystallization, and pH-triggered drug release makes these cellulose esters attractive candidates for Res bioavailability enhancement.     

Synthesis and characterization of alkyl cellulose ω-carboxyesters for amorphous solid dispersion

Poor drug solubility and consequently poor bioavailability are major impediments to new drug innovation, and they limit the performance of many existing drugs. In recent years amorphous solid dispersion (ASD) has emerged as one of the most effective approaches for enhancing drug solution concentration, and thereby bioavailability, including in many marketed drug formulations. Recently efforts have been under way in several laboratories to design new ASD polymers, rather than relying on polymers that are already in FDA-approved formulations, but were not designed as ASD polymers. We describe here the design and synthesis of a new class of polymers, alkyl cellulose ω-carboxyesters, for ASD formulation. We synthesize these polymers by reaction of cellulose alkyl ethers with monoprotected (benzyl ester), monofunctional long chain acid chlorides, followed by protecting group removal using mild hydrogenolysis to form the target alkyl cellulose ω-carboxyalkanoate. These new amphiphilic polymers have high glass transition temperatures (T_g), tunable carboxyl content for controlling release pH and drug-polymer interactions, and certain members of this new group of amphiphilic cellulose ether esters are shown to be successful at forming ASDs with the important model drug ritonavir. These ASDs efficiently release ritonavir at small intestine pH, creating the maximum attainable amorphous solubility (20 μg/mL), and maintaining it for a time period substantially greater than the normal residence time in the absorptive region of the stomach and small intestine. Members of this new class of alkyl cellulose ω-carboxyester amphiphiles show significant potential as ASD polymers for enhancing oral bioavailability of otherwise poorly soluble drugs.     

Solid dispersion systems engineered from hydroxypropyl‐β‐cyclodextrin and water‐soluble polymers for enhanced oral bioavailability of nimodipine

Nimodipine (NMD) is a calcium channel blocker that is used in the treatment of cerebrovascular disorders, such as stroke indicated for biological rhythm and neurological disorders. According to biopharmaceutical classification, NMD is categorized as a class ΙΙ drug, meaning it has a poor solubility profile. The objective of this experiment is to prepare multicomponent systems to enhance the solubility, dissolution, and bioavailability of NMD. Inclusion complex and solvent evaporation techniques have been exploited to overcome this challenge. in vitro dissolution studies and solubility, the profile was performed in three pH media (pH 7.5, 1.2, and 6.8). The drug release at (Q_60min) for SD‐PVP3 was 33‐fold higher than pure NMD in double‐distilled water. The solubility of SD PVP3 was about 30 times higher than plain NMD in double‐distilled water. A pharmacokinetic study in rats indicated that the AUC_0‐720 value of the inclusion complex (NMD‐KD) was 1.63‐fold higher than pure NMD. At the same time, the solid dispersion (NMD‐SD PVP3) was 3.94‐fold higher than that of plain NMD, indicating a significant increase in the bioavailability of NMD. The combination of the inclusion complex and solvent evaporation method led to the formation of new solid dispersions (SD PLX and SD PVP), which significantly increased the solubility, dissolution, and the oral bioavailability of NMD.     

Precipitation of some nonionic polymers by octylammonium thiocyanate

The effects of various alkylammonium thiocyanates (ethyl, butyl, hexyl, and octyl) on aqueous solutions of polyvinylpyrrolidone (PVP) and poly(vinyl alcohol–acetate) copolymer (PVA-Ac) were studied and compared with the effects caused by the respective chlorides. Whereas the PVP solution was hardly affected by the chlorides, it was precipitated by n-octylammonium thiocyanate (OASCN) at dilute concentrations and dissolved at higher concentrations. On taking the effects of ammonium chloride and thiocyanate on the solubility of PVA-Ac as references, with increasing of alkyl chain length, alkylammonium chlorides raised the polymer solubility steadily; on the contrary, the thiocyanates at dilute concentrations, except for ethylammonium thiocyanate, lowered it, and OASCN at dilute concentrations, except for ethylammonium thiocyanate, lowered it, and OASCN at dilute concentrations was a particularly strong salting-out agent. The amount of binding of OASCN to the polymers in the precipitated systems was measured. The precipitation was attributed to ion-pair binding of OASCN to the polymers, and the mechanism was discussed in terms of the interaction between the water structure-breaking SCN^? and the water structure-making hydrophobic groups.     

Improved dissolution of an insoluble drug using a 4-fluid nozzle spray-drying technique

A solid dispersion of the drug can be made using a polymer carrier to improve solubility. Generally, drugs become amorphized when solid dispersion is formed using a polymer carrier. In such high energy conditions, the solubility of the drug molecule is increased. We previously prepared solid dispersion using a spray-drying technique and reported its solubility and crystallinity. In this study, hydroxypropylmethylcellulose (HPMC) was used as the carrier, and tolubutamide was the model drug, which is water-insoluble. Solubility was evaluated by preparing a solid dispersion using a newly developed 4-fluid nozzle spray dryer. Observation of particle morphology by scanning electron microscopy (SEM) revealed that the particles from the spray drying were atomized to several microns, and they had also become spherical. Assessment of the crystallinity of the spray-dried particles by powder X-ray diffraction and differential scanning calorimetry demonstrated that the tolbutamide had been amorphized, forming a solid dispersion. The apparent release rate constant K of the drug from the spray-dried particles was 4 to 6 times faster than the original drug in pH 1.2, and it was also 1.5 to 1.9 times faster than the original drug in pH 6.8. The 70% release time (T(70)) of the drug from the spray-dried particles was 20 to 30 times faster than the original drug in pH 1.2 solution as well as 2 to 3 times faster than the original drug in pH 6.8 solution. Pharmaceutical preparations prepared in this way using the 4-fluid nozzle system spray dryer formed composite particles, resulting in a remarkably improved dissolution rates of the drug.     

Effect of humidity and solvent vapor phase on cellulose esters films

In the present study the effect of relative humidity (RH) during spin-coating process on the structural characteristics of cellulose acetate (CA), cellulose acetate phthalate (C-A-P), cellulose acetate butyrate (CAB) and carboxymethyl cellulose acetate butyrate (CMCAB) films was investigated by means of atomic force microscopy (AFM), ellipsometry and contact angle measurements. All polymer solutions were prepared in tetrahydrofuran (THF), which is a good solvent for all cellulose esters, and used for spin-coating at RH of (35 ± 5)%, (55 ± 5)% or (75 ± 5)%. The structural features were correlated with the molecular characteristics of each cellulose ester and with the balance between surface energies of water and THF and interface energy between water and THF. CA, CAB, CMCAB and C-A-P films spin-coated at RH of (55 ± 5)% were exposed to THF vapor during 3, 6, 9, 60 and 720 min. The structural changes on the cellulose esters films due to THF vapor exposition were monitored by means of AFM and ellipsometry. THF vapor enabled the mobility of cellulose esters chains, causing considerable changes in the film morphology. In the case of CA films, which are thermodynamically unstable, dewetting was observed after 6 min exposure to THF vapor. On the other hand, porous structures observed for C-A-P, CAB and CMCAB turned smooth and homogeneous after only 3 min exposure to THF vapor.     

Synthesis of cross-linked carboxymethyl cellulose and poly (2-acrylamido-2-methylpropane sulfonic acid) hydrogel for sustained drug release optimized by Box-Behnken Design

This research aims to fabricate and characterize chemically crosslinked CMC/PVP-co-poly (AMPS) based hydrogel for the sustained release of model drug metoprolol tartrate through the free radical polymerization technique. Box-Behnken Design was used to optimize CMC/PVP-co-poly (AMPS) hydrogel by varying the content of reactants such as; polymers (CMC and PVP), monomer (AMPS), and crosslinker (EGDMA). Carboxymethyl cellulose (CMC) was crosslinked chemically with AMPS with a constant ratio of PVP by the ethylene glycol dimethacrylate as the crosslinker in the presence of sodium hydrogen sulfite (SHS)/ammonium peroxodisulfate (APS) as initiators. After developing CMC-based hydrogels using different polymers, monomer, and crosslinker concentrations, this study encompassed dynamic swelling, sol–gel fraction, drug release and chemical characterizations such as FTIR, XRD, TGA, DSC, and SEM. In vitro drug release and swelling were performed at 1.2 and 6.8 pH to determine the sustained release pattern and pH-responsive behavior. These parameters depended on the crosslinker, polymer, and monomer ratios used in the formulation development. XRD, SEM, and FTIR showed the successful grafting of constituents resulting in the formation of a stable hydrogel. DSC and TGA confirmed the thermodynamic stability of the hydrogel. Hydrogel swelling was increased with an increase in the ratio of monomer; however, an increase in the ratio of polymer and crosslinker decreased the hydrogel swelling. In vitro gel fraction and drug release also depended on polymer, monomer, and crosslinker ratios. The fabricated CMC/PVP-co-poly (AMPS) hydrogels constituted a potential system for sustained drug delivery.     

Solution behavior and surface properties of carboxymethylcellulose acetate butyrate

Solution behavior of carboxymethylcellulose acetate butyrate (CMCAB) in acetone and ethyl acetate has been investigated by small-angle X-ray scattering (SAXS) and capillary viscometry and correlated with the characteristics of CMCAB films. Viscosity and SAXS measurements showed that ethyl acetate is a better solvent than acetone for CMCAB. Thin films of CMCAB were deposited onto silicon wafers (Si/SiO₂) by spin coating. AFM images revealed that CMCAB spin coated films from solutions prepared in ethyl acetate were homogeneous and flat. However, films obtained from solutions in acetone were very rough. Contact angle measurements with polar and apolar test liquids characterized CMCAB surfaces as hydrophobic and allowed estimating the surface energy of CMCAB. Sum frequency generation vibrational spectroscopy was used to understand the role played by solvents and to gain insight about molecular orientation at Si/SiO₂/CMCAB interface.     

Effect of sorbitan-based surfactants on glass transition temperature of cellulose esters

Thermal behavior of mixtures composed of cellulose acetate butyrate (CAB), carboxymethylcellulose acetate butyrate (CMCAB), or cellulose acetate phthalate (CAPh), and sorbitan-based surfactants was investigated as a function of mixture composition by means of differential scanning calorimetry (DSC). Surfactants with three different alkyl chain lengths, namely, polyoxyethylenesorbitan monolaurate (Tween 20), polyoxyethylenesorbitan monopalmitate (Tween 40), and polyoxyethylene sorbitan monostearate (Tween 60) were chosen. DSC measurements revealed that Tween 20, 40, and 60 act as plasticizers for CAB, CMCAB, and CAPh (except for Tween 60), leading to a dramatic reduction of glass transition temperature (T _g). The dependence of experimental T _g values on the mixture composition was compared with theoretical predictions using the Fox equation. Plasticization was strongly dependent on mixture composition, surfactant hydrophobic chain length, and type of cellulose ester functional group.     

Fabrication,characterization and evaluation of bacterial cellulose-based capsule shells for oral drug delivery

Bacterial cellulose (BC) was investigated for the first time for the preparation of capsule shells for immediate and sustained release of drugs. The prepared capsule shells were characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The BC capsule shells were studied for drug release using an USP type-I dissolution apparatus. Irrespective of the drying method and the thickness of the BC sheet, the capsule shells displayed an immediate drug release profile. Moreover, the addition of release-retardant cellulosic polymers sustained the drug release having first-order kinetics for hydroxypropylmethylcellulose and carboxymethyl cellulose sodium with R ² values of 0.9995 and 0.9954, respectively. Furthermore, these capsules shells remained buoyant in 0.1 N HCl (pH 1.2) solution up to 12 h. This study showed that BC is a promising alternative to gelatin capsules with both immediate and sustained drug release properties depending upon the compositions of the encapsulated materials.     

Solid state nuclear magnetic resonance studies of hydroxypropylmethylcellulose acetyl succinate polymer,a useful carrier in pharmaceutical solid dispersions

Hydroxypropylmethylcellulose (HPMC) acetyl succinate (HPMC-AS) is a key polymer used for the enablement of amorphous solid dispersions (ASDs) in oral solid dosage forms. Choice of the appropriate grade within the material is often made empirically by the manufacturer of small-scale formulations, followed by extensive real time stability. A key factor in understanding and predicting the performance of an ASD is related to the presence of hydrogen (or other) bonds between the polymer and active pharmaceutical ingredient (API), which will increase stability over the parameters captured by miscibility and predicted by the Gordon–Taylor equation. Solid state nuclear magnetic resonance (NMR) is particularly well equipped to probe spatial proximities, for example, between polymer and API; however, in the case of HPMC-AS, these interactions have been sometimes difficult to identity as the carbon-13 NMR spectra assignment is yet to be firmly established. Using feedstock, selectively substituted HPMC polymers, and NMR editing experiments, we propose here a comprehensive understanding of the chemical structure of HPMC-AS and a definitive spectral assignment of the ¹³C NMR spectra of this polymer. The NMR data also capture the molar ratios of the acetate and succinate moieties present in HPMC-AS of various grades without the need for post treatment required by chromatography methods commonly use in pharmacopoeia. This knowledge will allow the prediction and measurement of interactions between polymers and APIs and therefore a rational choice of polymer grade to enhance the solid state stability of ASDs.     

Encapsulation and characterization of flurbiprofen loaded poly(є-caprolactone)–poly(vinylpyrrolidone) blend micropheres by solvent evaporation method

Flurbiprofen loaded PCL/PVP blend microspheres were prepared by o/w solvent evaporation method using various concentrations of gelatin as emulsifying agent. Microsphere recovery decreased with a decrease in the concentration of the emulsifier in the dispersion. Encapsulation efficiency and drug loading of microspheres increased with decrease in concentration of emulsifying agent. Hydration rate, encapsulation efficiency and drug loading of microspheres increased with increase in concentration of PVP. Rheological properties showed free flowing nature of microspheres. SEM (Scanning electron microscope) revealed microspheres were discrete, spherical and became porous with decrease in concentration of emulsifying agent but smooth with higher concentration of emulsifying agent. FTIR (Fourier transform infrared spectroscopy) spectra of pure and encapsulated flurbiprofen in all formulation showed no significant difference in characteristic peaks, suggesting stability of flurbiprofen during encapsulation process. X-RD (X-ray powder diffractometry) of pure flurbiprofen shows sharp peaks, which decreases on encapsulation, indicating dispersion at molecular level and hence decrease in the crystallinity of drug in microspheres. Microspheres showed an enteric nature at pH 1.2 and a sustained release pattern at pH 6.8. Rapid drug release was observed in microspheres with higher concentration of PVP (polyvinylpyrrolidone), PVP acts as channeling agent. Formulation with low concentration of emulsifying agent also showed a fast release due to porous structure. Drug release kinetics followed zero order at pH 1.2 while at pH 6.8 Higuchi model was best fitted and was found non fickian.     

Characteristics of thin cellulose ester films spin-coated from acetone and ethyl acetate solutions

Spin-coated films of cellulose acetate (CA), cellulose acetate propionate (CAP), cellulose acetate butyrate (CAB) and carboxymethylcellulose acetate butyrate (CMCAB) have been characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The films were spin-coated onto silicon wafers, a polar surface. Mean thickness values were determined by means of ellipsometry and AFM as a function of polymer concentration in solutions prepared either in acetone or in ethyl acetate (EA), both are good solvents for the cellulose esters. The results were discussed in the light of solvent evaporation rate and interaction energy between substrate and solvent. The effects of annealing and type of cellulose ester on film thickness, film morphology, surface roughness and surface wettability were also investigated. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Regularities of formation of emboli of liquid polymer solutions in aqueous medium

Work on creating the basis for embolic compositions for the treatment of a wide range of pathologies of various organs was conducted. This basis is a solution of a biocompatible water-insoluble polymer in a biocompatible water-soluble solvent. Formation of the embolus in such an aqueous medium takes place in the transition of the solvent into the aqueous phase and the formation of a solid polymer clot occluding a blood vessel. Criteria for selection of the polymer and the solvent for the basis were formulated, and a number of polymers and solvents that meet these criteria were selected for further research. Research on the solubility of the selected polymers in solvents was carried out, and the rheoviscometric characteristics of polymer solutions, as well as parameters of solid emboli formation of polymer solutions in aqueous media, were found. The solution of cellulose acetate plasticized with OPADRY CA 500F190000 polyethylene glycol in dimethylsulfoxide with concentration of no less than 60 g/L was recognized as optimal for further studies.     

The study of the emulsification efficiency of Aerosil and HPMCAS type and their ratio to stabilize emulsions of zedoary turmeric oil

The solid particles or polymers were often solely used to stabilizing emulsions, as an interesting alternative to classical used emulsifiers. However, a united use of them and the relation between them at stabilizing emulsions were little reported. Our previous study showed that the preparation of microspheres containing zedoary turmeric oil (ZTO, as an oily drug), Aerosil200 particles and hydroxypropyl methylcellulose acetate succinate (HPMCAS). ZTO emulsions were produced when the microspheres were immersed into aqueous media and disaggregated under gentle agitation, and were stabilized by Aerosil200 particles and HPMCAS. Nevertheless, more work needs to be carried out to explain the factor affecting emulsification efficiency of microspheres, which will facilitate the design of the microsphere formulation. Thus, in this study, we dealt with a system consisting of Aerosil, HPMCAS, ZTO and water. To predict the best ratio of Aerosil/polymer and thus obtain the best satisfying ZTO emulsions, the bonding studies were carried out with Aerosil and HPMCAS. A series of emulsions was prepared and the stability and droplet size of resultant emulsions were investigated. The results indicated two kinds of HPMCAS (HPMCAS-LG and -HG) showed the different affinity for Aerosil200, which resulted in the unlike capability to stabilize emulsions when at the same Aerosil/polymer ratio. The stability and droplet size of emulsions increased on increasing the ratio Aerosil to polymer, and the best ratio was predictable from the Langumuir-fit of the adsorption isotherms. Appropriate hydrophilicity and hydrophobicity with Aerosil particles were very important to stabilizing the ZTO emulsions.     

Starch cellulose acetate co-acrylate (SCAA) polymer as a drug carrier

The present study aims to create a controlled-release system through the preparation and characterization of starch cellulose acetate co-acrylate (SCAA) polymer for application as a carrier for cancer drugs. SCA was prepared from maize starch and different ratios of cellulose acetate. The obtained product SCA was reacted with acrylic acid monomer to give cellulose acetate co-acrylate. The best ratio of starch to cellulose acetate was found to be 90:10, giving a stable product with acrylic acid. The cancer drug 8-(2-methoxyphenyl)-3,4-dioxo-6-thioxo-3,4,6,7-tetrahydro-2h-pyrimido[6,1-c]-[1,2,4]triazine-9-carbonitrile was dissolved in dimethylformamide then added gradually at the end of the previous reaction under stirring for 15 min. The prepared polymers with and without the drug were characterized by Fourier-transform infrared spectroscopy. Cuboids discs of the prepared polymer/drug were subjected to drug release in aqueous media at different pH values. The release was measured spectrophotometrically. It was found that the release rate depends on the pH of the aqueous medium as well as on the concentration of the drug loaded onto the polymer carrier. Above pH 12, the polymer containing the drug degraded completely within 1 h after being subjected to alkaline media. Sustained release of drug extended to about 20 days. The amount released depended on the pH of the media in the following order: basic media > acidic media > neutral. According to Higuch’s equation, the diffusion coefficient was found to be 4.2 × 10^?8 and 5.5 × 10^?8 cm s^?1 for the two evaluated concentrations (1.5 and 2 %) of active organic compound (drug).     

Effect of pore former on the properties of casted film prepared from blends of Eudragit NE 30 D and Eudragit L 30 D-55

The casted films of aqueous dispersions of Eudragit NE30 D and Eudragit L30 D-55 containing pore former were prepared. The study investigated the influence of pore former on basic model drug clarithromycin release, water uptake and water vapor permeability from casted film prepared from the blends of neutral polymer dispersion of Eudragit NE30 D and enteric polymer dispersion of Eudragit L30 D-55. This study was concluded that pore former hydroxypropyl methyl cellulose, lactose, polyethylene glycol (PEG) and polyvinyl pyrrolidon (PVP) was released at the beginning of the release process, the rate and extent of water uptake of the polymeric films were much higher in phosphate buffer pH 6.8 than in pH 5.0 and the concentration of pore former have a significant influence on the permeability to water vapour.     

Dynamic Release of Riboflavin from Ethyl Cellulose Coated Barium Alginate Beads for Gastrointestinal Drug Delivery: An in vitro Study

The present work describes the dynamic release of model drug riboflavin form uncoated and ethyl cellulose coated barium alginate beads in the media of continuous varying pH at the physiological temperature 37°C. The drug release behavior has been studied in the simulating gastric fluid (SGF, pH 1.2) for 0–2 h and then in the simulating intestinal fluid (SIF pH 6.8) for 2–48 h. In addition to the traditional dissolution test (TDT, the dynamic release has also been studied by a newly developed method, called ‘flow through diffusion cell’ (FTDC). The release profiles, obtained by using these two methods have been found to differ appreciably from each other. Moreover, the nature of the solid mass surrounding the beads in the FTDC method also influences the release behavior of beads. The uncoated beads demonstrated faster drug release of drug in the medium of lower pH (i.e., 1.2) as compared to that in the medium of pH 6.8 and the release process was found to be diffusion controlled.     

Synthesis of novel and regioselectively mesogen-incorporated thermotropic liquid crystals from cellulose derivatives

Regioselectively mesogen-incorporated cellulose derivatives, in which the hydroxy group at C-6 is displaced by a bulky and rigid mesogenic group such as {4-[(4-methoxyphenoxy)carbonyl]phenoxy}acetate or [(4′-cyanobiphenyl-4-yl)oxy]acetate, and the C-2 and C-3 groups are displaced by octanoyl or lauroyl groups, were synthesized. Thermogravimetric and differential scanning calorimetric analyses of the final products, along with polarized optical microscopic observations, revealed that the obtained cellulose derivatives have a thermotropic liquid-crystalline nature and transition from the mesomorphic to the isotropic phase over a wide range of temperatures. These derivatives could be considered to be main-chain liquid-crystalline cellulosic polymers.     

Zero-order release formulations using a novel cellulose ester

New carboxymethylcellulose esters were developed with useful properties for oral dosage forms in drug delivery. Normally, commercial cellulose esters are used as the major excipients in oral dosage forms as a coating or a membrane. In applications involving compression tablets, cellulose esters are usually mixed with other more hydrophilic matrix components to facilitate dissolution of the active. In the present study, novel cellulose esters were single component matrix resins. Pharmaceutical actives were cryogenically ground as a physical blend or an amorphous blend with the polymer. Subsequently, tablets were made by direct compression using a single tablet press, or capsules were made by filling them with the ground material. Dissolution tests were completed on the solid dosage forms at pH 1.2, 4.5, 6.8 or 7.4 in a United States Pharmacopeia (USP) II device to determine the release profiles for up to 24 h. Carboxymethylcellulose esters provide an excellent matrix for controlling both the rate of release and the pH at which pharmaceutical actives release into the aqueous environment. When used in suitable quantities, dictated by the active of interest, carboxymethylcellulose acetate butyrate provided zero-order release over sustained time up to 24 h.