Comparison of electrochemical properties of two-component C60-Pd polymers formed under electrochemical conditions and by chemical synthesis

The electrochemical behavior of C₆₀-Pd polymer formed under electrochemical conditions and by the chemical synthesis was examined. In these polymers, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Both materials deposited at the electrode surface show electrochemical activity at negative potentials due to the reduction of fullerene cage. Electrochemically formed thin polymeric films exhibit much more reversible voltammetric response in comparison to chemically synthesized polymers. The morphology and electrochemical behavior of chemically synthesized C₆₀-Pd polymer depend on the composition of grown solution. Chemical polymerization results in formation of large, ca. 50 μm, crystallic superficial structures that are composed of regular spherical particles with a diameter of 150 nm. The capacitance properties of C₆₀-Pd films were investigated by cyclic voltammetry and faradaic impedance spectroscopy. Specific capacitance of chemically formed films depends on the conditions of film formation. The best capacitance properties was obtained for films containing 1:3 fullerene to Pd molar ratio. For these films, specific capacitance of 35 Fg^?1 was obtained in acetonitrile containing (n-C₄H₉)₄NClO₄. This value is much lower in comparison to the specific capacitance of electrochemically formed C₆₀-Pd film.     

Electrochemical oxidation and reduction of osmium and iridium complexes with fullerene C<Subscript>60</Subscript>

The electrochemical oxidation and reduction of a series of complexes of platinum-group metals (Os, Ir, and Rh) with fullerene C₆₀ with common formula C₆₀[ML _n ] (ML _n is the metal and the metal-bonded ligands) in the tetrahydrofuran solution are studied using the method of cyclic voltammetry. The effect of metal and ligands on the variations in the redox properties of complexes and stability of anions, which are formed in the reduction, is considered. It is shown that all complexes studied are reduced more difficultly than free fullerene, and the reduced forms of metallofullerenes are less stable as compared with free fullerene anions.     

Electrochemically formed fullerene-based polymeric films

The recent results of investigations involving the electrochemical formation of polymers containing fullerenes and studies of their properties and applications are critically reviewed. From a structural point of view, these polymers can be divided into four main categories including (1) polymers with fullerenes physically incorporated into the foreign polymeric network without forming covalent bonds, (2) fullerene homopolymers formed via [2+2] cycloaddition, (3) “pearl necklace” polymers with fullerenes mutually linked covalently to form polymer chains, and (4) “charm bracelet” polymers containing pendant fullerene substituents. The methods of electrochemical polymerization of these systems are described and assessed. The structural features and properties of the electrochemically prepared polymers and their chemically synthesized analogs are compared. Polymer films containing fullerenes are electroactive in the negative potential range due to electroreduction of the fullerene moieties. Related films made with fullerenes derivatized with electron-donating moieties as building blocks are electroactive in both the negative and positive potential range. These can be regarded as “double cables” as they exhibit both p- and n-doping properties. Fullerene-based polymers may find numerous applications. For instance, they can be used as charge-storage and energy-converting materials for batteries and photoactive units of photovoltaic cell devices, respectively. They can be also used as substrates for electrochemical sensors and biosensors. Films of the C₆₀/Pt and C₆₀/Pd polymers containing metallic nano-particles of platinum and palladium, respectively, effectively catalyze the hydrogenation of olefins and acetylenes. Laser ablation of electrochemically formed C₆₀/M and C₇₀/M polymer films (M=Pt or Ir) results in fragmentation of the fullerenes leading to the formation of hetero-fullerenes, such as [C₅₉M]⁺ and [C₆₉M]⁺.Dedicated to Professor Dr. Alan M. Bond on the occasion of his 60th birthday.     

Stability studies of an electrochemically formed [C60]fullerene-palladium two-component film

The stability of C₆₀ and palladium two-component films, C₆₀/Pd, has been investigated. The effect of different polymerization conditions on the electrochemical stability of the film upon prolonged potential cycling has been studied. Stable voltammetric behavior was observed for polymers formed at potentials less negative than the potential of third C₆₀ reduction step. The incorporation of palladium particles into the structure of C₆₀/Pd polymers increases the polymer stability. The C₆₀/Pd films are doped with supporting electrolyte cations during reduction. The size of these cations is a crucial factor in determining the stability of the film. A strong solvent effect on the potential stability of the film was also observed. The wildest range of stable voltammetric properties was found for acetonitrile and N,N-dimethylformamide. No effect of the temperature on the film stability was observed. The results reported in this work allow for the determination of the optimal conditions for the formation of stable C₆₀/Pd films.     

Transition Metal Complexes of a Salen–Fullerene Diad: Redox and Catalytically Active Nanostructures for Delivery of Metals in Nanotubes

A covalently‐linked salen–C₆₀ (H₂L) assembly binds a range of transition metal cations in close proximity to the fullerene cage to give complexes [M(L)] (M=Mn, Co, Ni, Cu, Zn, Pd), [MCl(L)] (M=Cr, Fe) and [V(O)L]. Attaching salen covalently to the C₆₀ cage only marginally slows down metal binding at the salen functionality compared to metal binding to free salen. Coordination of metal cations to salen–C₆₀ introduces to these fullerene derivatives strong absorption bands across the visible spectrum from 400 to 630 nm, the optical features of which are controlled by the nature of the transition metal. The redox properties of the metal–salen–C₆₀ complexes are determined both by the fullerene and by the nature of the transition metal, enabling the generation of a wide range of fullerene‐containing charged species, some of which possess two or more unpaired electrons. The presence of the fullerene cage enhances the affinity of these complexes for carbon nanostructures, such as single‐, double‐ and multiwalled carbon nanotubes and graphitised carbon nanofibres, without detrimental effects on the catalytic activity of the metal centre, as demonstrated in styrene oxidation catalysed by [Cu(L)]. This approach shows promise for applications of salen–C₆₀ complexes in heterogeneous catalysis.     

Catalytic hydrogenation of C60 on transition metals

The catalytic hydrogenation of C₆₀ on Ru, Rh and Ir produced C₆₀H₁₈ mainly, while Pd, Pt, Co and Ni catalysts gave C₆₀H₃₆ principally. Very little activity was observed on Au and Fe. The higher hydrogenated fullerene obtained on Pd, Pt, Co and Ni was ascribed to the smaller % d-character of the metallic bond, on which the fullerene and hydrogen may more strongly be adsorbed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Radical functionalization of [60]fullerene and its derivatives initiated by the C(CF3)2C6H4F radical

It was found that the 2-(p-fluorophenyl)hexafluoroisopropyl radical produced by thermal dissociation of the Polishchuk dimer [C(CF₃)₂C₆H₄F]₂ can withdraw, under mild conditions, the H atom from the methyl group of toluene and mesitylene to form the corresponding radicals, whose addition to [60]fullerene occurs more selectively than in the case of photochemical production of these radicals. Dynamics of the step-by-step multiaddition of the radicals to C₆₀ was studied by ESR. It was found that the addition of benzyl radicals affords adducts containing from 3 to 5 benzyl groups, whereas no spin-adducts with five addends were observed for more bulky 3,5-dimethylphenylmethyl radicals. The interaction of 3,5-dimethylphenylmethyl radicals with the metal complexes (η²-C₆₀[IrH(CO)(PPh₃)₂] and (η²-C₆₀[Pd(PPh₃)₂] was studied for the first time. It was shown that the palladium derivative undergoes only demetallation. In the case of the Ir complex, up to 3 radicals add to the fullerene ligand in the same hemisphere where the transition metal is coordinated. The reaction rates are ∼5 times lower than those for C₆₀. The ability of 2-(p-fluorophenyl)hexafluoroisopropyl radicals to dehydrogenate C₆₀H₃₆ was found. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1119–1123, June, 1999.     

Electrochemical oxidation and reduction of rhodium and iridium complexes with fullerenes C60 and C70

The electrochemical behavior of rhodium and iridium complexes with fullerences C₆₀ and C₇₀ was studied by cyclic voltammetry in a THF—toluene mixture. The complexes were found to be capable of oxidation and reduction. It was demonstrated that thein situ generation of metallofullerene complexes in the electrochemical cell by the interaction of C₆₀ and C₇₀ with hydridocarbonylphosphine complexes of rhodium and iridium, HM(CO)(PPh₃)₃, is possible. The influence of structural factors and the action of CO₂ on changes in the redox properties of fullerene complexes was considered.     

Selection of the sample composition for the selective preconcentration of some platinum group metal ions by Donnan dialysis

The possibility of selective preconcentration of platinum group metal ions by Donnan dialysis was investigated. The effect of sample matrix (glycine) on self diffusion of the following platinum group metal ions Pt(IV), Pd(II), Rh(III), Ir(III) and Ir(IV) was determined. To separate a sample from the receiver electrolyte (0.5M NH₄Cl), anion or cation-exchange membrane were used. Excellent selective preconcentration of Pd(II) in the sample and Ir(III) in the receiver solution was achieved. Experiments performed enable to draw some conclusion on the charge sign of glycinepalladium complexes.     

Electrochemical properties of transition metal complexes with C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerne ligands (review)

t-The electrochemical properties of exohedral complexes of transition metals with metallofragments coordinated to C₆₀ and C₇₀ fullerene ligands in different coordination modes are surveyed. The effect of the nature, composition, and structure of metal-containing fragments on the electrochemical properties of these complexes and stability of products formed in the oxidation and reduction of complexes is discussed.     

Synthetic Methodologies and Structures of Metal-[C60]Fullerene Complexes

A review of the chemistry of transition metal-[C₆₀]fullerene complexes is presented. The main focus is directed toward the different methodologies for obtaining both metal bound and ligand bound complexes of C₆₀, and the different types of structures which have been so far identified for metal-C₆₀ complexes.     

Dimetallic Complexes with Bridging Seven-membered Cycloolefins. Synthesis,Multinuclear NMR.-Spectroscopic Properties and Structure

The synthesis of dimetallic olefin complexes of the type L¹M¹C₇H₇M²L² (M¹ = Fe, Co, Rh; M² = Rh, Ir, Pd; L¹ = CO, C₅H₅; L² = diene, allyl, P(OR)₃) is described. The fluxional structures were investigated by ¹³C-, ⁵⁷Fe- and ¹⁰³Rh-NMR.-spectroscopy, and a cisoid dimetallic coordination, including a (metal, metal)-bond, can be deduced for the C₇H₇-ring. ⁵⁷Fe- and ¹⁰³Rh-chemical shifts give indications for the charge distribution in the 34e-complexes. The homodimetallic complex (Cp)Rh(tropone)Rh(Cp) ( 13 , Cp = cyclopentadienyl) and the corresponding 2-methoxytropone complex 14 were synthesized in addition to the above mentioned complexes. A fluxional bis(1-3-η-allyl)-coordination of the two Rh-atoms was derived from the temperature-dependent ¹³C-NMR.-spectra. A spin simulation of the (Cp)-multiplets of 12 and 13 yields information about (Rh, Rh)-spin-coupling which amounts to ≈5 Hz at 30°.     

Two-component polymer films of palladium and fullerene with covalently linked crown ether voids: effect of cation binding on the redox behavior

Redox active films have been generated via electrochemical reduction in a solution containing palladium(II) acetate and fulleropyrrolidine with covalently linked crown ethers, viz., benzo-15-crown-5 and benzo-18-crown-6. In these films, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Films show ability to coordinate alkali metal cations from the solution. Therefore, in solutions containing salts of alkali metal cations, benzo-15-crown-5-C₆₀/Pd and benzo-18-crown-6-C₆₀/Pd films are doped with cations coordinated by crown ether moiety and anions of supporting electrolyte which enter the film to balance positive charge. These films are electrochemically active in the negative potential range due to the reduction of the fullerene moiety. Reduction of the polymer is accompanied by the transport of supporting electrolyte ions between solution and solid phase. In solution containing alkali metal salts, the process of film reduction is accompanied by the transport of anions from the film to the solution. In the presence of tetra(alkyl)ammonium salts, transport of cations from the solution to the film takes place during the polymer reduction.     

Topological aspects of metals in carbon cages: Analogies with organometallic chemistry

Metals can interact with carbon cages in the following ways: (1) stable carbon cages (i.e., fullerenes) function as electronegative olefins in their exohedral η₂ bonding to transition metals; (2) endohedral metallofullerenes with a highly electropositive lanthanide (Ln) inside the carbon cage can be considered to be ionic with lanthanide cations, Ln³⁺, and fullerene anions; (3) fullerenes too small for independent existence can be stabilized by internal covalent bonding to an endohedral metal atom using the central carbon atoms of pentagon triplets,i.e triquinacene, units, in complexes such as M@C₂₈ (M=Ti, Zr, Hf, and U), derived from the tetrahedral fullerene C₂₈; (4) metal atoms can occur as vertices of binary mixed metal-carbon cages in both early transition metal complexes of the types M₁₄C₁₃, M₈C₁₂, and M₁₃C₂₂ (e.g., M=Ti) and copper-carbon cages of the types Cu_2n +1C_2n ⁺ (n≤10), Cu₇C₈ ⁺, Cu₉C₁₀ ⁺ and Cu₁₂C₁₂ ⁺. The presence of metal atoms as vertices of carbon cages changes radically their stoichiometries and thus their structures. Thus, early transition metals form cages such as Ti₁₄C₁₃ assumed to have titanium atoms at the vertices and face midpoints of a 3×3×3 cube and carbon atoms at the edge midpoints and center of the cube and Ti₁₃C₂₂ assumed to have titanium atoms at the edge midpoints and center of a 3×3×3 cube as well as C₂ units and carbon atoms at the vertices and face midpoints, respectively, of the cube. Elimination of the face metal atoms from the Ti₁₄C₁₃ structure as well as the center carbon atom, which has been achieved experimentally by photofragmentation, leads to the Ti₈C₁₂ cluster. The structure of this cluster is based on a tetracapped tetrahedron withT _d symmetry with two distinct quartets of titanium atoms, six distinct C₂ pairs, and 36 direct Ti−C interactions. The copper-carbon cages of various stoichiometries are suggested to have prismatic, antiprismatic, or cuboctahedral structures in which the electronic configurations of the copper atoms approach the favored 18-electron rare gas configuration. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 862–869, May, 1998.     

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host–guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R- PAC-2 , S- PAC-2 (with Br substituents) and R- PAC-3 , S- PAC-3 (with CH₃ substituents) enantiomers. PAC-2 , rather than PAC-3 , achieves fullerene encapsulation and selective binding of C₇₀ over C₆₀ in fullerene carbon soot. More significantly, the occurrence of chiral induction between R- PAC-2 , S- PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C₇₀ selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.     

Redox Active Two‐Component Films of Palladium and Covalently Linked Zinc Porphyrin–Fullerene Dyad

Redox active films have been generated electrochemically by the reduction of dyads consisting of fullerene C₆₀ covalently linked to zinc meso‐tetraphenyloporphyrin, ZnP? C₆₀, and palladium acetate. The films are believed to consist of a polymeric network formed via covalent bonds between the palladium atoms and the fullerene moieties. In these films, the zinc porphyrin moiety is covalently linked to the polymeric chains through the pyrrolidine ring of the fullerene. The ZnP? C₆₀/Pt films are electrochemically active in both positive and negative potential excursions. At positive potentials, two oxidation steps for the zinc porphyrin are observed. In the negative potential range, electron transfer processes involving the zinc porphyrin and the fullerene entities are observed. Film formation is also accompanied by palladium deposition on the electrode surface. The presence of a metallic phase in the film influences its morphology, structure and electrochemical properties.     

Transition metal coated fullerenes

Compound clusters of fullerene molecules and transition metal atoms having the composition C₆₀M_x and C₇₀M_x with x = 0..150 and M ∈ {Ti, Zr, V, Y, Ta, Nb} were produced using laser vaporisation in a low-pressure inert gas aggregation cell. Intensity anomalies in the mass spectra correlate with the atomic radii of the different metals indicating the formation of complete metal layers around the central fullerene molecule. Using high laser intensities the metal-fullerene clusters can be transformed into metcars and metal-carbides. Photofragmentation spectra of preselected C₆₀Ta_x indicate that the fullerene cage is destroyed for x ≥ 3.     

Transition-Metal Complexes with Nano-Sized Phosphine and Pyridine Ligands-Catalysis,Fluxional Behavior and Molecular Recognition

Nano-sized phosphine and pyridine ligands having tetraphenylphenyl-, m-terphenyl-, poly(benzylether) moieties were synthesized. These ligands showed a remarkable effect on homogeneous transition metal catalyzed reactions. Pd(II) complexes with tetraphenylphenyl substituted pyridine ligands show high catalytic activities for oxidation of ketones suppressing Pd black formation and maintains the catalytic activity for a long time. Rh(I) complex catalysts with m-terphenyl substituted phosphine ligands showed remarkable rate acceleration in the hydrosilylation of ketones. In addition, several phosphinocalixarene ligands were synthesized and their coordination studies with Pd(II), Pt(II), Ru(II), Ir(I), and Rh(I) metals were documented. Ir(I) and Rh(I) cationic complexes with a 1,3,5-triphosphinocalix[6]arene ligand showed dynamic behavior with size-selective molecular recognition.     

Differential Many‐Body Cooperativity in Electronic Spectra of Oligonuclear Transition‐Metal Complexes

In computational chemistry, non‐additive and cooperative effects can be defined in terms of a (differential) many‐body expansion of the energy or any other physical property of the molecular system of interest. One‐body terms describe energies or properties of the subsystems, two‐body terms describe non‐additive but pairwise contributions and three‐body as well as higher‐order terms can be interpreted as a measure for cooperativity. In the present article, this concept is applied to the analysis of ultraviolet/visible (UV/Vis) spectra of homotrinuclear transition‐metal complexes by means of a many‐body expansion of the change in the spectrum induced by replacing each of the three transition‐metal ions by another transition‐metal ion to yield a different homotrinuclear transition‐metal complex. Computed spectra for the triangulo‐complexes [M₃{Si(mt^Me)₃}₂] (M=Pd/Pt, mt^Me=methimazole) and tritopic triphenylene‐based N‐heterocyclic carbene Rh/Ir complexes illustrate the concept, showing large and small differential three‐body cooperativity, respectively.     

Preparation and study of hydrides of fullerenes C60 and C70

Fullerene hydrides were prepared by hydrogenation of fullerences C₆₀ and C₇₀ using proton transfer from 9,10-dihydroanthracene to fullerene and were studied by mass spectrometry (electron impact, field desorption), IR, UV, and¹H and¹³C NMR spectroscopy. The main product of the hydrogenation of C₆₀ is C₆₀H₃₆, which is sufficiently stable. Hydrogenation of fullerene C₇₀ gives a series of polyhydrides C₇₀H _n (n=36–46), and the main product is C₇₀H₃₆. The dehydrogenation of C₆₀H₃₆ by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone is not quantitative and results in the formation of fullerene derivatives along with C₆₀. The comparison of the IR and¹H and¹³C NMR spectral data for solid C₆₀H₃₆ with the theoretical calculations suggests that the fullerene hydride has aT-symmetric structure and contains four isolated benzenoid rings located at tetrahedral positions on the surface of the closed skeleton of the molecule. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 4, pp. 671–678, April, 1997.