Forensic DNA typing by capillary electrophoresis using the ABI Prism 310 and 3100 genetic analyzers for STR analysis

DNA typing with short tandem repeat (STR) markers is now widely used for a variety of applications including human identification. Capillary electrophoresis (CE) instruments, such as the ABI Prism 310 and ABI 3100 Genetic Analyzers, are the method of choice for many laboratories performing STR analysis. This review discusses issues surrounding sample preparation, injection, separation, detection, and interpretation of STR results using CE systems. Requirements for accurate typing of STR alleles are considered in the context of what future analysis platforms will need to increase sample throughput and ease of use.     

Analysis of four PCR/SNaPshot multiplex assays analyzing 52 SNPforID markers

The SNPfor ID consortium identified a panel of 52 SNPs for forensic analysis that has been used by several laboratories worldwide. The original analysis of the 52 SNPs was based on a single multiplex reaction followed by two single‐base‐extension (SBE) reactions each of which was analyzed using capillary electrophoresis. The SBE assays were designed for high throughput genetic analyzers and were difficult to use on the single capillary ABI PRISM 310 Genetic Analyzer and the latest generation 3500 Genetic Analyzer, as sensitivity on the 310 was low and separation of products on the 3500 with POP‐7™ was poor. We have modified the original assay and split it into four multiplex reactions, each followed by an SBE assay. These multiplex assays were analyzed using polymer POP‐4™ on ABI 310 PRISM® and polymers POP‐4™, POP‐6™ and POP‐7™ on the 3500 Genetic Analyzer. The assays were sensitive and reproducible with input DNA as low as 60 pg using both the ABI 310 and 3500. In addition, we found that POP‐6™ was most effective with the 3500, based on the parameters that we assessed, achieving better separation of the small SBE products; this conflicted with the recommended use of POP‐7™ by the instrument manufacturer. To support the use of the SNP panel in casework in Malaysia we have created an allele frequency database from 325 individuals, representing the major population groups within Malaysia. Population and forensic parameters were estimated for all populations and its efficacy evaluated using 51 forensic samples from challenging casework.     

Applications of homemade kit in mutation detection of genes

With the accomplishment of Human Genome Project (HGP), single nucleotide polymorphism (SNP) and mutation detection in human genome are becom-ing a new researching focus. These researches can help us to understand the phenotype diversity of indi-vidual, disease susceptibility and drug resistance of different colonies. Traditional method used for muta-tion detection is slab gel electrophoresis, which re-mains labor-intensive and time-consuming because of the requirement of radioactivity or te…     

A modular microfluidic system for deoxyribonucleic acid identification by short tandem repeat analysis

Microfluidic technology has been utilized in the development of a modular system for DNA identification through STR (short tandem repeat) analysis, reducing the total analysis time from the ∼6 h required with conventional approaches to less than 3 h. Results demonstrate the utilization of microfluidic devices for the purification, amplification, separation and detection of 9 loci associated with a commercially-available miniSTR amplification kit commonly used in the forensic community. First, DNA from buccal swabs purified in a microdevice was proven amplifiable for the 9 miniSTR loci via infrared (IR)-mediated PCR (polymerase chain reaction) on a microdevice. Microchip electrophoresis (ME) was then demonstrated as an effective method for the separation and detection of the chip-purified and chip-amplified DNA with results equivalent to those obtained using conventional separation methods on an ABI 310 Genetic Analyzer. The 3-chip system presented here demonstrates development of a modular, microfluidic system for STR analysis, allowing for user-discretion as to how to proceed after each process during the analysis of forensic casework samples.     

Temperature and pH studies of short tandem repeat systems using capillary electrophoresis at elevated pH

The DNA secondary structure can affect the migration time and precision of DNA separations in the physical gels used in capillary electrophoresis (CE). To counteract these effects, DNA typing is performed using elevated temperatures (60 degrees C) and high concentrations (7 M) of urea. These conditions affect the precision and lifetime of the analysis. To better understand the effects of these conditions on the reproducibility of DNA migration, we examined the effects of temperature and pH on short tandem repeat (STR) analysis using the PE/ABI 310 Genetic Analyzer. Separations were performed using the Profiler + multiplex system, a set of coamplified STRs with a 4-base repeat motif, labeled at the 5'-end using fluorescent dyes. The analytical separations were obtained using a commercial buffer at pH 8 and an experimental buffer consisting of 3% hydroxyethylcellulose at pH settings ranging from 8-12. Multichannel laser-induced fluorescence detection was used. Temperatures were examined from 30-70 degrees C. The results demonstrate the fact that highly efficient separations can be carried out at alkaline pH. In addition, improvements in temperature stability were seen when compared to results at lower pH. However, high concentrations of urea were found to be necessary to achieve optimal resolution.     

Comparative analysis of CE‐SSCP to standard RFLP‐CE‐FLA method in quantification of known viral variants within an RNA virus quasispecies

RNA viruses display the highest replication error rate in our biosphere, leading to highly diverse viral populations termed quasispecies. The gold standard method for detection and quantification of variants in a quasispecies is cloning and sequencing, but it is expensive, laborious and time consuming. Therefore, other mutation detection approaches, including SSCP, are often used. In this study, we demonstrate development and the usage of a CE‐SSCP method for quantification of two nearly identical viral variants in heterogenic population of a mumps virus strain and its comparison to RFLP‐CE‐fragment length analysis (RFLP‐CE‐FLA). Analyzed PCR fragments were of the same size (245 bp) with one difference in their nucleotide sequence. The limit of detection of both methods was at 5% of the minor variant. When PCR amplicons of the two variants were pooled, methods' results were very similar. On the contrary, the quantification results of samples in which variants were mixed prior to PCR showed substantial difference between the two methods. Our results indicate that although both methods can be used for detection and monitoring of a specific mutation within a viral population, caution should be taken when quantitative analysis of complex samples is based solely on results of one method.     

Genetic mutation analysis by CE with LIF detection using inverse-flow derivatization of DNA fragments

Inverse-flow derivatization is a novel approach to obtain fluorescent DNA derivatives in DNA analysis based on CE with LIF detection. In the present work, we want to explore the feasibility of the application of this method into the mutation detection based on constant denaturant capillary electrophoresis (CDCE) and SSCP analysis. The DNA fragments were first amplified by PCR using a pair of common primers without fluorescent label, and then the mutations were determined by CDCE or SSCP analysis based on CE-LIF with inverse-flow derivatization of DNA fragments. The experimental conditions were investigated systematically, and different labeling modes including inverse-flow derivatization, on-column derivatization and fluorescent labeled primer technique were compared. The inverse-flow derivatization was successfully used in the detection of C677T mutation in the methylenetetrahydrofolate reductase gene by CDCE or SSCP analysis. Our preliminary results demonstrate that inverse-flow derivatization is very simple, inexpensive and sensitive and well suitable for the genetic analysis in clinical diagnosis.     

An integrated method for mutation detection using on-chip sample preparation, single-stranded conformation polymorphism, and heteroduplex analysis

This work integrates rapid techniques for mutation detection by producing single-stranded DNA and (renatured) double-stranded DNA on-chip, labeling these with fluorescent DNA stains and then performing two complementary methods of mutation detection-single stranded conformation polymorphism (SSCP) analysis and heteroduplex analysis (HA). This involves the denaturation of double-stranded polymerase chain reaction (PCR) product into single-stranded DNA, the mutation analysis of the single-stranded DNA by SSCP and the rehybridized double-stranded DNA by HA. These steps were performed entirely on-chip within several minutes of operation. The combination of these two mutation detection methods on-chip provides a highly sensitive method of mutation detection for either genotyping or screening. Many mutation analysis methods rely upon fluorescently labeled samples from a PCR with fluorescently labeled primers. By labeling on-chip we not only attain improved signal strength, but the method is considerably more versatile. Although we used PCR products in this work, this method could be used to analyze DNA from any source. We believe that this combination of several procedures on a single chip represents a significant step in the development of higher levels of integration upon microfluidic devices.     

Identification of the commonest cystic fibrosis transmembrane regulator gene DeltaF508 mutation: evaluation of PCR--single-strand conformational polymorphism and polyacrylamide gel electrophoresis

In the present study we investigated whether single-strand conformational polymorphism (SSCP) and polyacrylamide gel electrophoresis (PAGE) could be used for the identification of the CFTR DeltaF508 gene mutation, which is commonest in the Greek population. Using DNA from patients carrying this mutation, the appropriate 98 bp region of the CFTR gene was amplified by PCR and the reaction products were analysed by non-radioactive SSCP-electrophoresis using silver staining for band visualization and non-denaturating PAGE to confirm the results. SSCP electrophoretic analysis has been optimized for several parameters in order to achieve the best resolution. Single-strand DNA fragments gave a reproducible pattern of bands, characteristic for the particular mutation. Comparison of the obtain patterns with control samples allowed the detection of the DeltaF508 mutation in the patients studied by SSCP assay and these results were confirmed by the independent method of PAGE. Although SSCP and PAGE can be used for detection of this mutation, PAGE resulted in more distinct patterns than SSCP. It is, therefore, proposed that PAGE can be reliably used for the detection and identification of such a mutation in patients provided that suitable controls are available. The applicability of PAGE to identification of the mutation in carriers, particularly useful for population screening, is also discussed.     

Fast establishment of single-strand conformation polymorphism by targeted primer development in Pityogenes chalcographus (Coleoptera, Scolytinae)

SSCP is a widespread method for mutation detection in biomedical research. Yet, its potential as a tool for population genetics is still not fully utilized. Based on mitochondrial DNA sequences of 96 specimens of the wood-boring beetle Pityogenes chalcographus we constructed a phylogenetic tree of European populations. This tree consisted of six broadly sympatric diverged lineages containing in total 34 haplotypes. Genetic regions of high mutational activity were determined and used for targeted SSCP primer development. In an SSCP mass screening of 427 individuals more than 80% could be assigned to a distinct clade, revealing the insect's genetic structure in Europe. It was demonstrated that analysis of known sequences allows the setup of a functional SSCP protocol within less than two weeks of working time and that phylogenetic data may be retrieved with high accuracy and significantly reduced costs compared to direct sequencing of PCR products.     

Ultra high performance liquid chromatography-time of flight mass spectrometry for analysis of avocado fruit metabolites: method evaluation and applicability to the analysis of ripening degrees

We have developed an analytical method using UHPLC-UV/ESI-TOF MS for the comprehensive profiling of the metabolites found in the methanolic extracts of 13 different varieties of avocado at two different ripening degrees. Both chromatographic and detection parameters were optimized in order to maximize the number of compounds detected and the sensitivity. After achieving the optimum conditions, we performed a complete analytical validation of the method with respect to its linearity, sensitivity, precision, accuracy and possible matrix effects. The LODs ranged from 1.64 to 730.54 ppb (in negative polarity) for benzoic acid and chrysin, respectively, whilst they were found within the range from 0.51 to 310.23 ppb in positive polarity. The RSDs for repeatability test did not exceed 7.01% and the accuracy ranged from 97.2% to 102.0%. Our method was then applied to the analysis of real avocado samples and advanced data processing and multivariate statistical analysis (PCA, PLS-DA) were carried out to discriminate/classify the examined avocado varieties. About 200 compounds belonging to various structural classes were tentatively identified; we are certain about the identity of around 60 compounds, 20 of which have been quantified in terms of their own commercially available standard.     

Fluorescent-based single-strand conformation polymorphism/heteroduplex capillary electrophoretic mutation analysis of the P53 gene.

Fluorescent-based single-strand conformation polymorphism (F-SSCP) analysis with capillary electrophoresis (CE) is the most common method for the detection of mutation because of its high sensitivity and resolution. In this study, we prepared an inexpensive linear polyacrylamide (LPA), and successfully applied it to CE-SSCP analysis and tandem CE-SSCP/heteroduplex analysis (HA) of the P53 gene on an ABI capillary genetic analyzer. A comparison of the sieving capabilities of a homemade LPA and commercial polydimethylacrylamide (PDMA) demonstrates that the homemade LPA has a higher resolution, a shorter analysis time, and is more suitable for tandem SSCP/HA than commercial PDMA. To show the usefulness, mutations of P53 gene exon 7 - 8 in 37 tumor samples were investigated by using homemade LPA. The results indicate that 10 mutations were found in 9 of 37 cases; the majority of P53 mutations were missense mutations, and 70% were located in exon 7, which plays an important role in neoplastic progression in human tumorigenesis.     

Single-strand conformation polymorphism analysis of candidate genes for reliable identification of alleles by capillary array electrophoresis

We investigated the reliability of capillary array electrophoresis-single strand conformation polymorphism (CAE-SSCP) to determine if it can be used to identify novel alleles of candidate genes in a germplasm collection. Both strands of three different size fragments (160, 245 and 437 bp) that differed by one or more nucleotides in sequence were analyzed at four different temperatures (18 degrees C, 25 degrees C, 30 degrees C, and 35 degrees C). Mixtures of amplified fragments of either the intron interrupting the C-terminal WRKY domain of the Tc10 locus or the NBS domain of the TcRGH1 locus of Theobroma cacao were electroinjected into all 16 capillaries of an ABI 3100 Genetic Analyzer and analyzed three times at each temperature. Multiplexing of samples of different size range is possible, as intermediate and large fragments were analyzed simultaneously in these experiments. A statistical analysis of the means of the fragment mobilities demonstrated that single-stranded conformers of the fragments could be reliably identified by their mobility at all temperatures and size classes. The order of elution of fragments was not consistent over strands or temperatures for the intermediate and large fragments. If samples are only run once at a single temperature, small fragments could be identified from a single strand at a single temperature. A combination of data from both strands of a single run was needed to identify correctly all four of the intermediate fragments and no combination of data from strands or temperatures would allow the correct identification of two large fragments that differed by only a single single-nucleotide polymorphism (SNP) from a single run. Thus, to adequately assess alleles at a candidate gene locus using SSCP on a capillary array, fragments should be < or =250 bp, samples should be analyzed at two different temperatures between 18 degrees C and 30 degrees C to reduce the variability introduced by the capillaries, data should be combined from both strands and both temperatures, and undenatured double-stranded (ds)DNA molecular weight standards, such as ROX 2500, should be included as internal standards.     

Rapid identification of pathogenic bacteria by capillary electrophoretic analysis of rRNA genes

Molecular diagnosis is playing an increasingly important role in the rapid detection and identification of pathogenic organisms in clinical samples. The genetic variation of ribosomal genes in bacteria offers an alternative to culturing for the detection and identification of these organisms. Here 16S rRNA and 16S-23S rRNA spacer region genes were chosen as the amplified targets for single-strand conformation polymorphism (SSCP) and restriction fragment length polymorphism (RFLP) capillary electrophoresis analysis and bacterial identification. The multiple fluorescence based SSCP method for the 16S rRNA gene and the RFLP method for the 16S-23S rRNA spacer region gene were developed and applied to the identification of pathogenic bacteria in clinical samples, in which home-made short-chained linear polyacrylamide (LPA) was used as a sieving matrix; a higher sieving capability and shorter analysis time were achieved than with a commercial sieving matrix because of the simplified template preparation procedure. A set of 270 pathogenic bacteria representing 34 species in 14 genera were analyzed, and a total of 34 unique SSCP patterns representing 34 different pathogenic bacterial species were determined. Based on the use of machine code to represent peak patterns developed in this paper, the identification of bacterial species becomes much easier.     

Thermal,structural and rheological properties of starch from avocado seeds (Persea americana,Miller) modified with standard sodium hypochlorite solutions

The avocado (Persea americana, Miller) is a tree that is native to Central/North America (Mexico) and it is very popular worldwide due to its food applications. Its seeds contain an important amount of starch and there is lack of study and understanding regarding the physico-chemical properties of this biopolymer. In this research, starch granules were extracted from avocado seeds and oxidised with standard sodium hypochlorite solutions at 0.5, 1.0 and 2.0 %. Untreated and modified samples were investigated using the following techniques: simultaneous thermogravimetry–differential thermal analysis, differential scanning calorimetry, non-contact atomic force microscopy, rapid viscoamylographic analysis and X-ray powder patterns diffractometry. The main purpose was to investigate the thermal, structural and rheological behaviour of native and oxidised avocado starch, and it was verified that the treated samples showed a decrease in gelatinisation enthalpy and average roughness as well as in the degree of relative crystallinity and pasting properties.     

A rapid fluorescence based multiplex polymerase chain reaction--single-strand conformation polymorphism method for p53 mutation detection

We have developed a fast single-strand conformation polymorphism (SSCP) technique to screen for mutations and polymorphisms in exons 5-8 of the human tumor suppressor gene p53. We use multiplex polymerase chain reaction (PCR) to amplify the four exons in one single PCR reaction and then fluorescent SSCP for screening. p53 fragments are labeled with three different colors and a fourth color is used for an internal size marker calibrating the gel. The method was evaluated in two ways: (i) 16 different cell lines with known mutations were tested blindly for band-shifts with SSCP, and (ii) 32 human urinary bladder cancer samples were screened for mutations using the present technique. After screening for mutations all exons from all samples were sequenced, both sense as well as antisense strands. Evaluating the method with four different gels shows that 21/23 mutations and polymorphism were detected in the cell lines and that 10/10 mutations and polymorphisms were detected in the patient samples. Sensitivity, specificity, positive and negative predictive values were 91/100%, 88/ 97%. 78/77% and 96/100% for cell lines / patient samples, respectively. Sensitivity, using one SSCP gel only, was 87% (20/23) for cell lines and 90% (9/10) for patient samples. We conclude that our modified SSCP technique is efficient and has a sensitivity close to 100% in detecting mutations.     

Single strand conformation polymorphism analysis of ras oncogene by capillary electrophoresis with laser-induced fluorescence detector

Single strand conformation polymorphism (SSCP) analysis of the N-ras oncogene was achieved by capillary electrophoresis with a laser-induced fluorescence detector (CE-LIF) using methylcellulose as a molecular sieving agent. The PCR-amplified N-ras oncogene, which is known to have a point mutation at codon 61 in the neuroblastoma, was investigated by CE-LIF combined with SSCP (SSCP-CE-LIF). A mixture of wild- and mutant-type single strand DNA fragments (103 bp) of the N-ras oncogene was separated by buffer solution containing 1.0% methylcellulose and 0.2 microM fluorescent dye (YO-PRO-1) at 25 degrees C. The SSCP-CE-LIF technique gave good resolution for wild- and mutant-type single strand DNA fragments with separation completed within 7 min. SSCP analysis using a CE system with a LIF detector was successfully applied to the detection of the one point mutation on the N-ras oncogene.     

Single-strand conformation polymorphism for p53 mutation by a combination of neutral pH buffer and temperature gradient in capillary electrophoresis

A large number of point mutations in the p53 gene have been detected by capillary zone electrophoresis via single-strand conformation polymorphism (SSCP) analysis. A much improved detection sensitivity was obtained via the following modifications in running conditions: use of low-viscosity 3% hydroxyethylcellulose (HEC), a neutral pH (pH 6.8) buffer, in which the standard Tris moiety was substituted with a 2-(N-morpholino)ethanesulfonic acid (MES)/Tris mixture, use of SYBR Green II for improved fluorescent signal at the lower pH adopted; and, finally, the use of a temperature gradient in the 15-25 degrees C interval, for favoring the conformational transitions in the mutated samples. The typical temperature gradient activated had a slope of 2 degrees C/min and were induced externally. A total of 24 samples from affected patients, both in the homo- and heterozygous state, were analyzed. All the mutations could be detected by this improved protocol, raising the sensitivity from the standard ca. 80% of conventional SSCP to essentially 100% with the present methodology. All the mutations were confirmed by sequence analysis of the affected samples.     

Detection of K-ras exon 1 mutations by constant denaturant capillary electrophoresis

Among various mutation detection methods, constant denaturant capillary electrophoresis (CDCE) is one of the most common techniques for rapid identification of known or unknown mutations. In this report, a CDCE analysis method with homemade linear polyacrylamide (LPA) kit was developed on ABI 310 genetic analyzer, the effect and relationship of various denaturing factors in CDCE analysis were investigated and K-ras gene mutations of 31 coloerctal cancer patients were detected. Results indicate that, with the increase of chemical danaturant concentration, the optimum temperature was lowered, and when the concentration of urea (formamide) was higher than 7 M (40%), the homoduplex and heteroduplex of mutant samples were separated with difficulty. Detection results of K-ras gene in colorectal samples indicated that mutations were present in eight (26%) of 31 patients; most mutations were localized in codon 12, which is thought to be a critical step and plays an important role in human colorectal carcinogenesisas.     

Evaluation of different sample treatments for determining pesticide residues in fat vegetable matrices like avocado by low-pressure gas chromatography-tandem mass spectrometry

A multi-residue method has been developed for determining 65 pesticide residues in greasy vegetable matrices such as avocado. Conventional organic solvent extraction assisted by a high-speed homogenizer was compared to pressurized liquid extraction (PLE) as extraction techniques. Following this, the lipophilic extract was purified using gel permeation chromatography (GPC). Alternative clean-up methods were also evaluated, as solid-phase extraction cartridges individually used and downstream coupled, but less effective lipophilic separation was archived. The pesticide residue determination was carried out using low-pressure gas chromatography coupled to tandem mass spectrometry (LP-GC-MS-MS), showing the applicability of this type of GC columns for the analysis of fat vegetable matrices. The proposed methodology was validated in avocado matrix. The recoveries were in the range 70-110%, with RSD values lower than 19%, at 12 and 50 microg/kg spiking levels. The limits of quantitation (LOQs) were in the range 0.04-8.33 microg/kg and the limits of detection (LODs) were between 0.01 and 2.50 microg/kg. All of them were lower than the maximum residue levels (MRLs) set by the European Union (EU) in avocado. The proposed method was evaluated analyzing pesticide residues in real avocado samples.