Etude en Spectrométrie de Masse. X—Fragmentation d'Ethanes Disubstitués par un Hétéroatome des Colonnes IV,V et VI,et par un Groupement Fonctionnel

In this paper, the behaviour of ethers, sulfides, selenoethers, amines, germanes and stannanes, substituted on the β-C by a methoxycarbonyl, methyl ketone, or cyano group is compared and discussed. The compounds containing group V_B or VI_B element are quite stable, while those with a group IV_B element fragment very easily. Fragmentation α to the heteroatom gives peaks for which the intensity increases with the size of the element:[PhO]⁺<[PhS]⁺<[PhSe]⁺<[Ph₃Ge]⁺<[Ph₃Sn]⁺. Fragmentation at the β position gives very important peaks when the ionization potential is low or when the substituents inductive effect is strong (CN<CO₂CH₃<COCH₃).     

Effect of structural variations of dibenzocrown ether resins and their acyclic analogues upon ion-pair sorption of alkali metal salts from aqueous and aqueous methanol solutions

Abstract

Ion-pair sorption of alkali metal salts from aqueous and aqueous methanol solutions by acyclic and cyclic dibenzopolyether resins possessing different side arm groups such as hydroxy, methoxy and carboxy has been investigated. The results reveal that both sorption selectivity and efficiency are influenced by: (1) the methanol content of the aqueous sample solution; (2) the acyclic or cyclic nature of the polyether unit; (3) the conformational positioning of the side arm group with respect to the crown ether cavity; and (4) the identity of the counteranion species of the alkali metal salt. For sym-(C₃H₇)(R′)dibenzo-16-crown-5 resins, the sorption selectivity and efficiency increased as the R′ group was varied: -OCH₃ < -OH < -OCH₂CO₂H. The highest sorption efficiency and Na⁺ selectivity was obtained for sym-(propyl)dibenzo-16-crown-5-oxyacetic acid resin (7) in which the pendent carboxylic acid group is oriented over the crown ether cavity. The use of a less hydrated anion in the alkali metal salt species enhances the ion-pair efficiency: SO₄ ^2- < NO₃ ^?, Cl^?, Br^? < I^? < SCN^?. Monovalent metal selective sorption was noted for competitive ion-pair sorption of NaCl, KCl, MgCl₂ and CaCl₂ by resin 7.     

Iodomethane oxidative addition to β-diketonatobis(triphenylphosphite)rhodium(I) complexes: A synthetic, kinetic and computational study

New rhodium(I)- and rhodium(III)-β-diketonato complexes of the type [Rh(FcCOCHCOR)(P(OPh)₃)₂] and [Rh(FcCOCHCOR)(P(OPh)₃)₂(CH₃)(I)], with Fc = ferrocenyl and R = Fc, CH₃ and CF₃, have been synthesized. The reactivity of complexes of the type [Rh(β-diketonato)(P(OPh)₃)₂] increase in the order: β-diketonato = (CF₃COCHCOCF₃)⁻ < (CF₃COCHCOPh)⁻ < (CF₃COCHCOCH₃)⁻ < (PhCOCHCOPh)⁻ < (CF₃COCHCOFc)⁻ < (CH₃COCHCOPh)⁻ < (CH₃COCHCOCH₃)⁻ < (CH₃COCHCOFc)⁻ < (FcCOCHCOFc)⁻, giving linear relationships between the kinetic parameter ln k₂ and the parameters that are related to the electron density on the rhodium centre; the sum of the group electronegativities of the β-diketonato side groups (χ_R + χ_R′) and the pK_a of the uncoordinated β-diketone RCOCH₂COR′. The large negative values of the volume and entropy of activation indicated a mechanism which occurs via a polar transition state. A density functional theory study, at the PW91/TZP level of theory, indicates that oxidative addition of iodo methane to [Rh(FcCOCHCOCF₃)(P(OCH₃)₃)₂] occurs via a two-step mechanism. This mechanism involves a nucleophilic attack by the metal on the methyl carbon to displace iodide to form a metal-carbon bond and the coordination of iodide to the five-coordinated intermediate to give a six-coordinated trans alkyl product.     

Synthesis and thermal stability of silicon-containing esters of phosphorus acids

A number of trialkylsilylmethyl diphenyl phosphates MeRR′SiCH₂OP(O)(OPh)₂ (1a-e: R=Et (a), Pr (b), CF₃CH₂CH₂ (c, e), Me₃SiCH₂ (d); R′=Me (a-d), Et (e)) were synthesized and their thermal rearrangement, of the 1,2-shift type, was studied. The rearrangement consists of the migration of an alkyl group from Si atom to the methylene carbon atom and gives the corresponding silyl esters. The rate of the rearrangement was found to increase in the order1d<1b<1a<1 (R=R′=Me)<1c corresponding to the enhancement of the total inductive effect (−I) of the substituents at the Si atom. The relative migration ability of the substituents at the Si atom, determined by GC/MS analysis of the disiloxane fraction resulting from hydrolysis of pyrolyzed phosphates1a-e, increases in the order R=Pr<Et<CF₃CH₂CH₂<Me≪Me₃SiCH₂, which differs substantially from the order in which the rate of the rearrangement of phosphates1a-d changes. The electronegativity of the migrating group affects noticeably the relative ability to migrate. For Part 4, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 1767–1772, September, 1998.     

Ba3 ? xSrxSm(BO3)3 Solid Solutions (0 < x < 3)

Samples of a continuous series of Ba_{3 − x} Sr _x Sm(BO₃)₃ solid solutions (0 < x < 3), crystallizing in the trigonal crystal (system, space group R3ˉ) were synthesized by solid-phase reactions. Formation of a continuous series of solid solutions in the system was confirmed by X-ray phase analysis. The X-ray characteristics of phases of variable composition were determined. __________ Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 12, 2005, pp. 2054–2055. Original Russian Text Copyright ? 2005 by Khamaganova, Oshorova.     

Some diolefin complexes of iridium(I) and a trans-influence series for the complexes [IrCl(cod)L]

A high-yield synthesis of [IrCl(cod)]₂ (cod = 1,5-cyclooctadiene) is described. The ¹H and ¹³C NMR spectra of a number of complexes [IrCl(cod)L] are interpreted in terms of a trans-effect series Cl^? < sym-collidine < 2-picoline < PCy₃ < P-i-Pr₃ < Pet₃ ～ AsPh₃ < PMe₂Ph < PMePh₂ < PPh₂ <P(MeO)Ph₂ < PClPh₂ < P(OPh)₃ < PCl₂Ph. Some ligand exchange reactions of [IrCl(cod)L] are discussed. A number of complexes of the type [Ir(cod)L_n]PF₆ (L = a variety of amines (n = 2) and phosphines (n = 2 or 3)) are described. Exchange reactions of the sort: [Ir(cod)(PR₃)₂]PF₆ + [Ir(cod)(py)₂]PF₆ ? [Ir(cod)(PR₃)Py]PF₆ are reported in which, surprisingly, the isolable mixed ligand complexes are the only detectable species at equilibrium (py = pyridine).     

Studies on the exchange characteristics of [Co(NH3)6]3+ in amberlite IRC-50

Summary The exchange of Co(NH₃)₆]³⁺-ions on amberlite IRC-50 resin has been studied at room temperature. For this exchange process the cations are effective in the order: Cs⁺<Rb⁺<K⁺<Na⁺<Li⁺<NH₄ ⁺<Mg²⁺ <Ca²⁺<H⁺ and (C₂H₅)₄N<(CH₃)₄N⁺ ≪Cetyltrimethylammonium-ion <Cetylpyridinium-ion. The logarithm of the selectivity coefficient gives linear graphs when plotted against the radius of the hydrated ions or the reciprocals of theDebye-Hückel parameter?.     

1,5-Migrations of silicon between oxygen centers in silyl β-diketones

A series of acyclic silyl diketonates, (CH₃)₃Si(dik), where dik = dipivaloyl-methanate, diisobutyrylmethanate and hexafluoroacetylacetonate, along with a new series of cyclic acetylacetonates of the type CH₃(-CH₂(CH₂)_xCH₂-)Si(acac), where x = 1, 2, and 3, have been shown to possess enol ether structures in which the acyl group is positioned cis or trans to the silyl group. The ratios of cis to trans configurations in the (CH₃)₃Si(dik) series increase from <0.02 to >50.0 in the order of diketonate substituents CF₃ < CH₃ <i-C₃H₇ < t-C₄H₉. The ratios for the CH₃(-CH₂(CH₂)xCH₂-)Si(acac) compounds increases in the order χ = 1 > 2 > 3. These data are interpreted in terms of incipient pentacoordination of silicon by the carbonyl oxygen atom in the cis isomer. Rates of 1,5-migration of silicon between oxygen centers in the cis isomers have been determined by NMR spectroscopy. The dependence of the rearrangement rates on diketonate substituent and angle strain at silicon indicate that the migration process is better viewed as an internal nucleophilic displacement, rather than a sigmatropic shift. 1,5-Migration in the chiral (C₆H₅CH₂)(CH₃)(C₆H₅)Si derivative of dipivaloylmethanate occurs exclusively with retention of configuration at silicon. The large difference in activation energy for migration and inversion (>18 kcal/mol) precludes the possibility of distinguishing between a stepwise and concerted displacement mechanism.     

The microwave spectrum and large-amplitude vibrations of N-methylaniline

Microwave spectra of the normal and amine-deuterated isotopic species of N-methyl-aniline in the ground and some low-lying excited vibrational states have been observed. The inertial defect indicates that the dihedral angle of the N-CH₃, bond with respect to the ring plane is somewhat less than that for the N—H bonds in aniline. The position of the amino-hydrogen atom is very poorly determined by the isotopic substitution method because of large zero-point effects. The excited vibrational states are consistent with a double-minimum potential for the inversion of the HNCH₃ group and there is some evidence for a lower barrier than in aniline. The excited states of the HNCH₃ torsion indicate a barrier in the range 8 < V₂ < 25 kJ mol^?1 to the internal rotation of this group. No splitting of the ground-state lines attributable to the torsion of the methyl group has been observed, which implies a barrier of V₃ > 8 kJ mol^?1.     

Effect of the nature of organic solvents on their interaction with metal halides

The radioactive tracer technique was used for studying the extraction and predicting the best conditions of separation of arsenic halides by organic solvents of different nature. Sulphuric acid was found to enhance the extraction of arsenic halides. Extraction of AsI₃ increases in the order cyclohexane <CCL₄ toluene <o-xylene <CHCl₄ and is quantitative by benzene and nitrobenzene. For a given extraction increases in the order AsCl₃<AsBr₃< <AsI₃. Spectral measurements were made on some solvents; at maximum absorption there was a linearity between absorbance and AsI₃ concentration up to 2·10⁻⁴ M for o-xylene and to 2.5·10⁻⁴ M for nitrobenzene.     

Carbene tetrel-bonded complexes

An ab initio calculation has been carried for the carbene tetrel bonded complexes CH₃Y???CH₂ (Y = F, CN, NC, and NO₂), CH₃F???CZ₂ (Z = Cl and CH₃), XH₃F???CF₂ (X = C, Si, Ge, and Sn), SiF₄???CF₂, and XH₃F???NHC (N-heterocyclic carbene), where carbene is treated as a Lewis base and XH₃Y is a Lewis acid. Formation of the tetrel bond is mainly attributed to charge transfer from the lone pair on the C atom in the carbene toward the σ* X–Y orbital and also the σ* X–H one in the strong tetrel bond. The carbene tetrel bond is strengthened/weakened by the electron-withdrawing group in the tetrel donor/acceptor and enhanced by the methyl group in C(CH₃)₂. NHC forms a stronger carbene tetrel bond in XH₃F???NHC (X = Si, Ge, and Sn) where it exceeds that of the majority of H-bonds. Interestingly, the tetrel bond becomes stronger in the order of X = C < Ge < Sn < Si in XH₃F???NHC and the largest interaction energy occurs in SiH₃F???NHC, amounting to ?103 kJ/mol. The carbene tetrel bond can be strengthened by cooperative effect with the N???M interaction in trimers H₂C???CH₃CN???M (M = CH₃CN, HCN, ICN, SbH₂F, LiCN, and BeH₂) and has doubled in H₂C???CH₃CN???BeH₂.

     

An X-ray diffraction, magnetic susceptibility and spectroscopic studies of Yb2−xCrxO3

Polycrystalline samples with general formula Yb_2−xCr_xO₃ (0<x<0.03), obtained by sol-gel method and analyzed by X-ray diffraction, formed solid solutions over all the mentioned range. Cr showed a maximum solubility of 2.8 mol% in Yb₂O₃ sesquioxide at 1000 °C. A preferential substitution of Cr³⁺ ions over two cationic sites, 8b and 24d in the space group Ia-3 was found. The lattice parameters a are found to vary linearly (10.4402(4) Å <a<10.4372(1) Å) with the composition x. The two independent atoms Yb/Cr have octahedral coordination; however, the degrees of distortion of their coordination polyhedron are different. Replacing Yb³⁺ by Cr³⁺ introduces slight changes in the atomic coordinates leading to an increase of the mean cation-anion distances. The ability of Raman spectroscopy to detect changes in local coordination is utilized. A pseudo-tetrahedral coordination for the Cr³⁺ in the 24d site was found. Magnetic susceptibility measurements of all samples were done in a temperature range of 2-50 K. For T<37 K, the inverse paramagnetic susceptibilities depend linearly on temperature. However, in the high-temperature region, for T>37 K, the inverse paramagnetic susceptibilities are non-linear versus temperature. This deviation from the Curie-Weiss behaviour was discussed.     

Thermochemistry of molybdenum tricarbonyl complexes of arenes and cyclic polyolefins

The heats of reaction of arene, cycloheptatriene, and cyclooctatetraene complexes of molybdenum tricarbonyl with pyridine yielding (py)₃Mo(CO)₃ have been measured by solution calorimetry. Reaction of toluene molybdenum tricarbonyl with cyclopentadiene yielding HMo(CO)₃C₅H₅ and with tetrahydrofuran yielding (THF)₃Mo(CO)₃ have also been studied thermochemically. These measurements yield accurate values for the enthalpy of arene exchange in methylene chloride solution for a number of organomolybdenum complexes. The order of stability: benzene < toluene < cyclooctatetraene < mesitylene < hexamethylbenzene < cycloheptatriene < (tris)-tetrahydrofuran < η⁵-cyclopentadienylhydrido < (tris)-pyridine spans a range of 31 kcal/mol.The enthalpy of isomerization of cycloheptatriene to toluene is reduced by 7.1 ± 1.2 kcal/mol upon coordination to molybdenum tricarbonyl, indicative of a loss of “resonance” energy for the complexed arene. The MoH bond strength in HMo(CO)₃C₅H₅ is estimated as 66 ± 8 kcal/mol. The importance of entropic factors in arene exchange is discussed.     

Reactions Invariantes Induisant La Densification Des Varistances ZnO

The electrical properties of ZnO varistors are induced by a sintering step. The phenomena occurring during this thermal treatment have been studied through model systems whose nature and composition are well defined. The pure BiSbO₄ and Bi₃ Zn₂ Sb₃ O₁₄ phases have been synthetised by Direct Oxidation of a Precursory Alloy (DOPA) and characterized using XRD method. Each one of these phases can react with zinc monoxide through an invariant isobaric reaction in the ZnO–Bi₂ O₃ –Sb₂ O₃ system: – at 998°C 17/3<ZnO>+2/3<Bi₃ Zn₂ Sb₃ O₁₄ > arrow <Zn₇ Sb₂ O₁₂ > + ((Bi₂ O₃ )) – at 1058°C 7<ZnO>+2<BiSbO₄ > arrow <Zn₇ Sb₂ O₁₂ >+((Bi₂ O₃ )) These thermodynamic considerations can explain the thermal domain of the sintering reaction described in the literature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Beiträge zur chemie der halogensilan-addukte XV. 2,2′-bipyridin- und 1,10-phenanthrolin-komplexe von halogendisilanen und Si3Cl8

A series of mono-bipy and -phen complexes (bipy = bipyridine, phen = phenanthroline) of the perhalodisilanes, Si₂F₆, Si₂Cl₆ and Si₂Br₆, mixed methylhalodisilanes (Si₂Me_nX_6?n, X = Cl, I; n = 2,3) and Si₃Cl₈ · bipy have been prepared by reaction of the components, and have been characterized. $\text{1}\text{1}$ complexes are obtained exclusively.The structures of all complexes involve coordination of the base to the more acidic silicon and perpendicular alignment of the SiSi axis on the plane of the ligand. This may be rationalised in terms of steric requirements of the different groups, the more demanding groups occupying the sterically more favorable positions vertical to the plane of the ligand. For Si₃Cl₈ · bipy, spectroscopic and chemical evidence suggests bipy-coordination to the center silicon. PMR investigations of the dissociation equilibria of the complexes in solution led to determination of the heats of formation of four of the complexes and to a qualitative estimation of the relative acceptor strengths of several disilanes. Contrary to expectation, silyl groups increase the acceptor strength of silicon considerably and in the order SiMe₃ < SiMe₂Cl < SiMeCl₂ < SiCl₃. The effect of a SiMe₃, substituent group may be compared to that of Cl. Methylchlorosilyl groups may exceed the effect of Cl as indicated by the increase in acceptor strength in the sequence (R =) Me < Ci < SiMe₂Cl < SiMeCl₂ for the acceptor RSiCl₂Me. Si₃Cl₈ is the strongest acceptor in the series. Assuming the structural suggestion for Si₃Cl₈ · bipy (center coordination) to be correct an increase in acceptor strength is indicated in the sequence SiCl₃(Si₂Cl₅) < SiCl₂(SiCl₃)₂ (Si = coordinating center). This may be interpreted mainly in terms of charge accepting capacity of the polarisable silyl groups. Another interesting sequence of acceptor strengths measured in this work is 1,1,2-Si₂Me₃F₃, 1,2-Si₂Me₂F₄ < Si₂Me₃Cl₃ < 1,2-Si₂Me₂Cl₄, showing fluorodisilanes to be weaker acceptors than chlorodisilanes. This result is compared to the heats of formation of SiX₄ · 2py complexes.     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

A Programmed DNA Marker Based on Bis(4‐ethynyl‐1,8‐naphthalimide) and Three‐Methane‐Bridged Thiazole Orange

Two large conjugated naphthalimide derivatives with or without three‐methane‐bridged thiazole orange (TO3; i.e., compounds 1 a and 2 a , respectively) were designed and synthesized. The fluorescence of the naphthalimide group in compound 1 a at λ=532 nm initially decreased and that for the TO3 group at λ=655 nm increased sequentially upon adding Salmon testes (St) DNA. In contrast, without the TO3 group, the fluorescence intensity of compound 2 a monotonously decreased in response to the addition of DNA. The non‐monotonic change in the fluorescence for compound 1 a could be divided into two linear sections with two different wavelengths in the range of 0<R_{b/ 1 a} <1.2 and 1.2 <R_{b/ 1 a} <6.0 (R_{b/ 1 a} =[base pair]/[ 1 a ]). Thus, compound 1 a can be regarded as a programmed responding molecule for DNA, which can semi‐quantitatively determine the concentration of DNA over a large concentration range from the standard fluorescence curve of compound 1 a at different wavelengths when bound with DNA. Furthermore, the binding modes of compounds 1 a and 2 a with StDNA were studied by using CD spectroscopy and melting temperature (T_m) testing. The results showed that compound 1 a interacts with StDNA through multi‐interactions including weak intercalation, weak minor groove binding, and inter‐dye interactions, whereas compound 2 a bound with DNA through simultaneous intercalation and minor groove binding.     

Density functional theory study on structural isomers and bonding of model complexes M(CO)5(BH3 · PH3) (M = Cr, Mo, W) and W(CO)5(BH3 · AH3) (A = N, P, As, Sb)

The influence of group 15 various substituents and effect of metal centers on metal-borane interactions and structural isomers of transition metal-borane complexes W(CO)₅(BH₃ · AH₃) and M(CO)₅(BH₃ · PH₃) (A = N, P, As, and Sb; M = Cr, Mo, and W), were investigated by pure density functional theory at BP86 level. The following results were observed: (a) the ground state is monodentate, η¹, with C₁ point group; (b) in all complexes, the η¹ isomer with C_S symmetry on potential energy surface is the transition state for oscillating borane; (c) the η² isomer is the transition state for the hydrogens interchange mechanism; (d) in W(CO)₅(BH₃ · AH₃), the degree of pyramidalization at boron, interaction energy as well as charge transfer between metal and boron moieties, energy barrier for interchanging hydrogens, and diffuseness of A increase along the series A = Sb < As < P < N; (e) in M(CO)₅(BH₃ · PH₃), interaction energy is ordered as M = W > Cr > Mo, while energy barrier for interchanging hydrogens decreases in the order of M = Cr > W > Mo.     

Cationic polymerization of dimethyl-1,3-butadienes

The cationic polymerizations of dimethyl-1,3-butadienes with various catalysts in methylene chloride and toluene have been investigated. The activity of catalysts decreased in the order WCl₆ > AcClO₄ > SnCl₄·TCA > BF₃OEt₂. The homopolymerization rate of dimethyl-1,3-butadienes with WCl₆, AcClO₄, and SnCl₄·TCA decreased in the order 1,3-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,4-hexadiene. The polymers prepared with WCl₆, SnCl₄.TCA, and BF₃OEt₂ were rubberlike polymers or white powders, whereas those prepared with AcClO₄ were oily oligomers. The 1,4-propagation increased in the order 1,2-dimethyl-1,3-butadiene < 1,3-dimethyl-1,3-butadiene < 2,3-dimethyl-1,3-butadiene < 2,4-hexadiene. This order may indicate that the steric effect of methyl group determine primarily the microstructure of the polymer. The relative reactivity of dimethyl-1,3-butadienes toward a styryl cation decreased in the order 1,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 2,4-hexadiene. This order may be explained in terms of the stability of the resulting allylic cation.     

NaNb6Cl15 – Preparation,Structure, Ionic Conduction

NaNb₆Cl₁₅ is prepared by heating Nb₃Cl₈, NaCl and Nb under Ar at 1 170 < T [K] < 1 270 forming black regular dodecahedra. It crystallizes in the cubic space group Ia3 d (a = 2 041.7(2) pm at room temperature) and transforms to a tetragonal structure below 150 K (probably I4₁/acd, a = 2 037.2(6), c = 2 028.2(2) pm at 80 K). The Na⁺ ions are at room temperature dynamically disordered in a split position. Their mobility is investigated by IR spectroscopy and electrochemical methods.