Reusable copper-catalyzed cross-coupling reactions of aryl halides with organotins in inexpensive ionic liquids

A combination of Cu2O nanoparticles with P(o-tol)3 shows highly catalytic activity for the Stille cross-coupling reaction. A series of copper catalysts and ligands were evaluated, and Cu2O nanoparticles combined with P(o-tol)3 provided the best results. In the presence of Cu2O nanoparticles and P(o-tol)3, a variety of aryl halides including aryl chlorides underwent the Stille reaction with organotins smoothly in moderate to excellent yields using inexpensive TBAB (n-Bu4NBr) as the medium. It is noteworthy that the Cu2O/P(o-tol)3/TBAB system can be recovered and reused at least three times without any loss of catalytic activity among the reactions of aryl iodides and activated aryl bromides.     

CuI-catalyzed suzuki-miyaura and sonogashira cross-coupling reactions using DABCO as ligand

In the presence of TBAB, CuI-catalyzed Suzuki-Miyaura cross-coupling of vinyl halides and aryl halides with arylboronic acids was conducted smoothly to afford the corresponding diarylethenes and polyaryls in moderate to good yields using DABCO (1,4-diazabicyclo[2.2.2]octane) as the ligand. We also found that the inexpensive CuI/DABCO catalytic system was effective for Sonogashira cross-couplings of aryl halides and vinyl halides. A variety of aryl halides and vinyl halides including activated aryl chlorides underwent the coupling with terminal alkynes in moderate to excellent yields.     

The selective reaction of aryl halides with KOH: synthesis of phenols, aromatic ethers, and benzofurans

The direct and selective synthesis of phenols from aryl/heteroaryl halides and KOH has been achieved through the use of highly active monophosphine-based catalysts derived from Pd(2)dba(3) and ligands L1 or L2 and the biphasic solvent system 1,4-dioxane/H(2)O. We have also demonstrated a one-pot method of phenol formation/alkylation for the preparation of alkyl aryl ethers from aryl halides. In many instances, this protocol overcomes limitations in existing Pd-catalyzed coupling reactions of aliphatic alcohols with aryl halides. Finally, we demonstrate that substituted benzofurans can be prepared efficiently via a Pd-catalyzed phenol formation/cyclization protocol starting from 2-chloroaryl alkynes.     

Pd(OAc)_2/TBAB催化卤代芳烃与末端炔烃的Sonogashira交叉偶联反应研究

研究了无铜、无配体、可回收利用的催化体系[Pd(OAc)2/TBAB]催化卤代芳烃与末端炔烃的Sonogashira交叉偶联反应,高产率地合成了一系列偶联产物,其结构经1H NMR和13C NMR表征。催化实验结果表明,Pd(OAc)2/TBAB可回收重复使用3次,催化活性基本不变。     

Modified palladium-catalyzed Sonogashira cross-coupling reactions under copper-, amine-, and solvent-free conditions

[reaction: see text] PdCl2(PPh3)2 combined with TBAF under solvent-free conditions provided general and fast Sonogashira cross-coupling reactions of aryl halides with terminal alkynes. In particular, this protocol could be applied to the reactions of deactivated aryl chlorides. In the presence of 3 mol % of PdCl2(PPh3)2 and 3 equiv of TBAF, a number of ArX species (X = I, Br, Cl) were coupled with alkynes to afford the corresponding products in moderate to excellent yields under copper-, amine-, and solvent-free conditions.     

Pd/C-mediated coupling of aryl halides with terminal alkynes in water

2-Aminoethanol facilitated the alkynylation of aryl halides (Sonogashira reaction) under palladium/charcoal-copper catalysis in water affording a mild and practical method for the synthesis of arylalkynes. A variety of terminal alkynes were coupled with aryl iodides and bromides possessing no hydrophilic functional groups to give the coupled products in good to excellent yields.     

Cu2O/SiC高效催化卤代芳烃与酚类的Ullmann偶联反应

卤代苯与酚类化合物反应制取二芳基醚是现代有机合成中的一个重要反应.传统的二苯醚合成方法是铜催化卤代苯与酚类化合物的Ullmann型C-O偶联反应,但是这种方法需要苛刻的反应条件.后来,人们发现了Pd(0)和Cu(Ⅰ)基催化剂,但是前者成本较高,且需要使用昂贵的配体,因此其应用受到了限制,而铜作为一种成本较低的催化剂受到了越来越多的关注.铜催化剂可以分为均相和非均相两大类.均相铜催化剂使用的是铜盐,并且需要加入配体,成本较高,且不易分离和循环利用.非均相铜催化剂研究较多的是CuO,Cu2O及Cu纳米颗粒,其中Cu2O纳米颗粒催化剂对Ullmann型C-O偶联反应具有很高的催化活性,但是它在潮湿的空气中容易被氧化,因此需要寻找一种合适的载体防止Cu2O纳米颗粒被氧化.SiC具有优良的化学稳定性及导电导热性能,并且作为载体己经成功应用到很多热催化及光催化反应中.本文以高比表面积的SiC为载体,以二乙二醇作为溶剂和还原剂,采用传统的两步液相还原法制备了Cu2O/SiC催化剂,并通过X射线衍射、X射线光电子能谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和H2程序升温还原等方法对Cu2O/SiC催化剂进行了表征.SEM和TEM结果表明,Cu2O纳米颗粒均匀分散在SiC表面,同时上述表征结果都表明Cu在SiC上主要以Cu2O的形式存在.将制备的Cu2O/SiC催化剂用于催化卤代芳烃与酚类的Ullmann C-O偶联反应中.以碘苯和苯酚的Ullmann C-O偶联反应为模型实验,考察了反应温度、反应时间、溶剂、碱的种类及用量和催化剂用量等条件的影响,得到了碘苯与苯酚UllmannC-O偶联反应的最优反应条件为:卤代芳烃14 mmol,酚类14 mmol,1.0当量的Cs2CO3,Cu2O/SiC(5 wt％) 10 mg,四氢呋喃10mL,在Ar气氛下150℃反应3h.在该条件下,二苯醚收率达到97％,转化频率(TOF)高达1136 h-1.Cu2O/SiC催化剂对Ullmann C-O偶联反应具有很好的普适性,并且对Ullmann C-S偶联反应也表现出很高的活性,TOF高达1186h-1.以碘苯和苯酚的Ullmann C-O偶联反应为基准实验,对催化剂的循环稳定性进行了考察.Cu2O/SiC催化剂五次循环后二苯醚的收率从97％降低至64％,这主要是由于活性组分Cu2O的流失所致.     

Novel pyridine‐bis(ferrocene‐isoxazole) ligand: synthesis and application to palladium‐catalyzed Sonogashira cross‐coupling reactions under copper‐ and phosphine‐free conditions

We present here the first synthesis and application to Sonogashira reaction of pyridine‐bis(ferrocene‐isoxazole) Pd(II) complex 5 , prepared from 2,6‐bis‐(5‐ferrocenylisoxazole‐3‐yl)pyridine. Under copper‐ and phosphine‐free conditions, the stable complex 5 efficiently catalyzed the cross‐coupling of aryl halides with terminal alkynes in DMF–H₂O with TBAB as an additive, hexahydropyridine as base and affording internal arylated alkynes in moderate to excellent yields. Copyright © 2008 John Wiley & Sons, Ltd.     

Microwave-enhanced and ligand-free copper-catalyzed cyanation of aryl halides with K4[Fe(CN)6] in water

Copper-catalyzed cyanation of aryl halides was improved to be more economical and environmentally friendly by using water as the solvent and ligand-free Cu(OAc)₂·H₂O as the catalyst under microwave heating. The suggested methodology was applicable to a wide range of substrates including aryl iodides and activated aryl bromides.     

Palladium-catalyzed tetrakis(dimethylamino)ethylene-promoted reductive coupling of aryl halides

Tetrakis(dimethylamino)ethylene (TDAE)/cat. PdCl(2)(PhCN)(2)-promoted reductive coupling of aryl bromides having either electron-donating or electron-withdrawing groups on their para- and/or meta-position proceeded smoothly to afford the corresponding biaryls in good to excellent yields. Notably, TDAE is such a mild reductant that easily reducible groups, such as carbonyl and nitro groups, are tolerate. A similar reductive coupling of ortho-substituted aryl bromides did not occur at all. The proper choice of palladium catalysts is essential for the reductive coupling; thus, PdCl(2)(PhCN)(2), PdCl(2)(MeCN)(2), Pd(hfacac)(2), Pd(2)(dba)(3), PdCl(2), and Pd(OAc)(2) were used successively for this reaction, but phosphine-ligated palladium catalysts such as Pd(PPh(3))(4), PdCl(2)(PPh(3))(2), and Pd(dppp) did not promote the reaction. The reductive coupling did not occur with nickel catalysts such as NiBr(2), NiCl(2)(bpy), and Ni(acac)(2). The TDAE/cat. palladium-promoted reductive coupling of aryl halides having electron-withdrawing groups took place more efficiently than that of aryl halides substituted with electron-donating groups. A plausible mechanism of TDAE/cat. palladium-promoted reaction is discussed.     

Palladium-catalyzed three-component coupling of arynes with allylic acetates or halides and terminal alkynes promoted by cuprous iodide

Benzynes react with allylic acetates or halides and terminal alkynes in the presence of Pd(PPh3)4, CuI and CsF in CH3CN at 50 degrees C for 5 h to give 1-allyl-2-alkynylbenzene derivatives in good to excellent yields.     

Palladium-tetraphosphine complex: an efficient catalyst for the coupling of aryl halides with alkynes

The cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)-cyclopentane-[PdCl(eta3-C3H5)]2 system catalyses the coupling of aryl halides with alkynes with very high ratios of substrates-catalyst in good yields; a turnover number of 2600000 can be obtained for the reaction of 4-trifluoromethylbromobenzene with phenylacetylene in the presence of this catalyst.     

Palladium-catalyzed three-component coupling reaction of organic halides, norbornadiene and terminal alkynes

A three-component coupling reaction of organic halides, including aryl halides, methyl iodine, alkenyl iodine and bromoalkynes, with norbornadiene and terminal alkynes catalyzed by a palladium complex and a phase transfer agent in the presence of aqueous NaOH gave 5,6-disubstituted norbornene derivatives in good yields.     

Stereo-recognizing transformation of (E)-alkenyl halides into sulfides catalyzed by nickel(0) triethyl phosphite complex

(E)-Alkenyl halides were transformed into (E)-alkenyl sulfides by the nickel(0) triethyl phosphite complex-catalyzed reaction with thiols, whereas (Z)-alkenyl halides gave alkynes under the same reaction conditions. Aryl halides were also transformed into aryl sulfides using the same reagent system.     

Copper-catalyzed decarboxylative coupling of aryl halides with alkynyl carboxylic acids performed in water

Most alkynes are volatile liquids, which are relatively difficult to use and to transport. In contrast, alkynyl carboxylic acids offer a stable and attractive alternative for the alkynylation reactions. Here, we employed alkynyl carboxylic acids as reaction partners for the alkynylation of aryl halides. Copper-catalyzed decarboxylative coupling, including various challenging aryl bromides with phenylpropiolic acid, was performed in water without using co-solvents with good yields. Our approach provides a low-loading, low-cost, stable and environmentally friendly copper catalyst system for decarboxylative coupling.     

An efficient and mild iron-mediated synthesis of alkenyl halides via direct C-C bond formation of benzyl alcohols and aryl alkynes

This work demonstrated an efficient and mild method for preparing various substituted alkenyl halides via direct C-C bond formation of benzyl alcohols and aryl alkynes in CH₂Cl₂ at 50 °C by using 50 mol % of FeCl₃·6H₂O or FeBr₃. Compared with the systems using excessive boron trihalides and stoichiometric n-BuLi to prepare substituted alkenyl halides, the present procedure would provide an excellent alternative due to the environmentally benign system and atom efficiency.     

A simple catalyst system for the palladium-catalyzed coupling of aryl halides with terminal alkynes

A convenient catalyst system consisting of Pd(OAc)₂, PPh₃, K₃PO₄ and DMSO was found to be effective for the coupling reaction of aryl halides with terminal alkynes as well as the deacetonative coupling reaction using a 4-aryl-2-methylbut-3-yn-2-ol as a terminal alkyne precursor. An iminophosphine as a ligand worked more effectively for some combination of substrates than triphenylphosphine.     

Palladium-catalyzed amination of aryl halides on solid support

[reaction: see text] The first examples of the Pd(0)-catalyzed amination of aryl halides using Rink-resins as nitrogen source are described. Pd(2)dba(3)/BINAP/NaO-t-Bu was found to be the most efficient catalyst/base system, while a solvent mixture of dioxane and tert-butyl alcohol was shown to enhance the selectivity toward the desired monoarylation. Moderate to good yields and excellent purities of the amination products were found with electron-poor aryl halides, while electon-rich aryl halides failed to react under these conditions.     

Magnetically recyclable nano copper/chitosan in O‐arylation of phenols with aryl halides

Interaction of chitosan (CS) with Fe₃O₄, followed by embedding Cu nanoparticles (NPs) on the magnetic surface through adsorption of Cu²⁺, and its reduction to Cu^o via NaBH₄, offers a reusable efficient catalyst (Fe₃O₄/CS‐Cu NPs) that is employed in cross‐coupling reactions of aryl halides with phenols, which affords the corresponding diaryl ethers, with good to excellent yields. The catalyst is completely recoverable from the reaction mixture by using an external magnet. It can be reused four times, without significant loss in its catalytic activity.     

Palladium-catalyzed cross-coupling reactions between dihydropyranylindium reagents and aryl halides. synthesis of C-aryl glycals

[reaction: see text] Palladium(0)-catalyzed cross-coupling reactions between tris(dihydropyranyl)indium 1 and aryl halides 2 have been investigated. Aryl iodides and electron-deficient aryl bromides couple efficiently with the in situ-generated indium reagents in the presence of 1-5 mol % Cl(2)Pd(PPh(3))(2) to produce substituted dihydropyrans 3 with minimal (<10%) dimer (4) formation. Organoindium reagents derived from D-glucal also undergo cross couplings with aryl iodides to produce C-aryl glycals.