Er3+/Yb3+共掺纳米In2O3的制备及上转换发光

用低温溶剂热法以乙二醇为溶剂合成了Er3+和Yb3+共掺的In2O3纳米晶。用X射线衍射(XRD)、透射电镜(TEM)、漫反射光谱和上转换发光光谱对样品进行了分析。XRD和TEM结果表明,产物为纯的立方相In2O3结构,粒径约为30 nm;漫反射光谱显示了In2O3∶Er3+,Yb3+纳米晶在522、653和975 nm附近有3个吸收带;在980 nm近红外光激发下,样品发射出中心波长为525及555 nm的绿光和662 nm的红光,分别对应于Er3+的2H11/2→4I15/2、4S3/2→4I15/2和4F9/2→4I15/2跃迁;研究了Er3+和Yb3+离子的不同掺杂浓度对发光强度的影响,确定了Yb3+和Er3+离子的最佳掺杂浓度均为3%;双对数曲线显示绿光和红光的发射过程均为双光子吸收过程,对样品的上转换发光机制进行了初步讨论。     

稀土离子掺杂Ba2GdF7纳米颗粒的合成及其上转换发光性质研究

采用热分解法制备了稀土离子掺杂的立方相Ba2GdF7上转换发光纳米粒子。利用X射线衍射(XRD)技术测定了样品的物相,通过透射电子显微镜(TEM)和荧光分光光度计分别分析了样品的形貌、尺寸和上转换发射光谱。实验结果表明:合成的样品为单分散的、其平均尺寸为14 nm,立方相结构的Ba2GdF7纳米颗粒。在980 nm红外光激发下Ba2GdF7:Yb0.2Er0.04纳米颗粒分别发射来自于Er3+离子2H11/2→4I15/2,4S3/2→4I15/2光跃迁的绿光和4F9/2→4I15/2光跃迁的红光发射。     

Er3+和Ce3+/Ce4+掺杂β-BaB2O4纳米棒的制备、结构与发光性质

以Ba(NO3)2、NaBH4、Er2O3和CeO2为原料, 在十六烷基三甲基溴化铵(CTAB)表面活性剂辅助下, 采用水热法制备了β-BaB2O4 (β-BBO)纳米棒, 稀土离子Er3+单掺杂的β-BBO(β-BBO:Er3+)及Er3+和Ce3+/Ce4+共掺杂的β-BBO(β-BBO:Er3+/Ce3+/Ce4+)纳米棒. 通过X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼光谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)和光致发光(PL)光谱分别对样品的物相、结构、形貌、成分及光致发光性质进行了表征. 研究结果表明: 微量稀土离子掺杂并不改变β-BBO的结构, 制得的纳米棒尺寸均匀, 长度在200-500 nm 之间, 直径在10-20 nm 之间; β-BBO:Er3+和β-BBO:Er3+/Ce3+/Ce4+纳米棒在400nm光激发下, 在可见光范围内都观察到中心波长为515和542 nm的绿光. 对发光机理的初步研究表明: 发光分别对应于Er3+的2H11/2→4I15/2, 4S3/2→4I15/2跃迁, 铈离子以Ce3+和Ce4+两种形式存在于体系中, Ce3+对Er3+起敏化作用, 可以显著增强β-BBO:Er3+/Ce3+/Ce4+纳米棒的发光强度, 存在Ce3+→Er3+的能量传递过程.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

GdAlO_3:Er~(3+),Yb~(3+)荧光粉的制备与上转换发光性能

采用共沉淀、溶胶-凝胶和固相反应法制备了GdAlO3:Er3+,Yb3+荧光粉.借助X射线衍射、扫描电子显微镜、傅里叶变换红外光谱、N2-吸附、吸收光谱和荧光光谱等手段研究了不同方法制备的GdAlO3:Er3+,Yb3+荧光粉结构、形貌、表面基团和光吸收及上转换发光性能.结果表明:用共沉淀法比固相反应法和溶胶-凝胶法可以在更温和的条件下制得纯相GdAlO3:Er3+,Yb3+荧光粉,用共沉淀法和溶胶-凝胶法制备的GdAlO3:Er3+,Yb3+荧光粉颗粒都在纳米尺寸,溶胶-凝胶法制得的样品存在相对严重的颗粒团聚现象,而用固相反应法制备的荧光粉为微米级颗粒.GdAlO3:Er3+,Yb3+荧光粉在980 nm激发的上转换发射光谱包含波长为524和546 nm的绿光与659 nm的红光,且三种方法制备的样品绿光发射强度都显著高于红光.不同方法制备的荧光粉上转换发光强度和红光/绿光强度比相差较大,共沉淀法制备的样品上转换发光强度要显著高于固相法以及溶胶-凝胶法制备的样品,而溶胶-凝胶法制备的样品发光中红光/绿光相对强度比最高.红外光谱显示,不同方法制备的GdAlO3:Er3+,Yb3+荧光粉表面OH-、CO32-及CO2官能团含量不同,溶胶-凝胶法制备的样品要明显高些.基于红外光谱、不同Er3+和Yb3+离子掺杂浓度及不同激光功率上转换发光的结果,对Er3+和Yb3+之间的能量传递过程及不同方法制备荧光粉的上转换发光性能进行了讨论.     

Er3+和Yb3+共掺杂La2Ti2O7纳米晶的上转换发光

采用溶胶-凝胶法制备了 Er3+单掺杂A2 Ti2O7(A=La,Y,Gd)和Er3+,Yb3+共掺杂的La2 Ti2O7纳米晶样品.用X射线衍射仪、扫描电子显微镜和紫外-可见-近红外光谱仪分别对样品的结构、形貌和光吸收性质进行了表征;测试了样品在980 nm激光激发下的室温上转换光谱.结果发现,样品都发出了很强的绿光(大约在525和549 nm)和红光(大约660 nm).通过研究这些基质的晶体结构对上转换发光的影响,发现La2 Ti2O7基质中Er3+离子的上转换发射最强.对La2 Ti2O7纳米晶的上转换发光研究表明,Yb3离子能够有效地敏化Er3离子的上转换发射.对上转换发光强度与泵浦功率的依赖分析,发现红光和绿光的发射均属于双光子吸收过程,最后讨论了Er3+和Yb3的上转换发光机制.     

Dy3+单掺及Dy3+,Er3+共掺GdVO4纳米粒子的制备及发光性能的研究

用水热法制备了Dy3+单掺及Dy3+,Er3+双掺GdVO4纳米荧光粉,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱仪(FTIR)和荧光(FL)光谱对合成样品的结构、形貌和发光性能进行表征;探讨了Dy3+掺杂浓度、络合剂对GdVO4:Dy3+纳米晶的结构、形貌和发光性能的影响;考察了不同波长的近红外光和紫外光激发的GdVO4:Dy3+,Er3+,得到不同颜色的上转换和下转换荧光光谱。以760~830 nm近红外光和210~380 nm紫外光激发GdVO4:Dy3+纳米晶,可获得Dy3+蓝绿色双模发光;其中蓝光来自于Dy3+离子的4F9/2→6H15/2跃迁,绿光由Dy3+离子4F9/2→6H13/2跃迁产生。     

Na(Y1.5Na0.5)F6:Yb3+/Er3+纳米棒的制备及其上转换发光特性

采用水热合成法,使用油酸作为乳化剂制备了Yb3+/Er3+共掺杂六角相Na(Y1.5Na0.5)F6纳米棒。通过X射线衍射(XRD)、扫描电子显微镜(SEM)以及荧光光谱等测试手段对所制备的样品进行表征。测试结果表明,Na(Y1.5Na0.5)F6纳米晶的晶格常数为a=b=0.600 nm,c=0.352 nm。在980 nm红外光激发下,Yb3+/Er3+共掺杂Na(Y1.5Na0.5)F6纳米棒发出从红光到近紫外的上转换荧光,其中红光、绿光和近紫外光分别对应于Er3+离子4F9/2→4I15/2,(2H11/2,4S3/2)→4I15/2和(2G11/2/2H9/2)→4I15/2的能级跃迁。详细讨论和分析了各荧光波段的上转换发射过程。     

GdF3∶Er^3＋,Yb^3＋的合成和上转换发光特性

采用水热法制备了Er^3＋离子浓度为3%,Yb^3＋离子浓度分别为10%,20%的GdF3∶Er^3＋,Yb^3＋。XRD结果表明：合成的样品均为正交结构的GdF3,Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26nm。研究了980nm红外光激发的上转换发射光谱。结果表明：红光和绿光发射分别来自于Er^3＋离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁。样品的绿光发射强度较红光发射强。但绿光和红光发射的相对强度比例与Yb^3＋离子浓度有关。对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论。     

新型Ce3+掺杂亚磷酸锰开放骨架材料的合成与荧光性质

通过高通量实验方法制备了一系列新型的Ce³⁺离子掺杂亚磷酸锰(NH₄)₄[Mn_4-xCe_x(HPO₃)₆](简称JIS-10∶xCe³⁺) 无机开放骨架材料. 通过粉末X射线衍射(PXRD)谱图、 扫描电子显微镜(SEM)、 微量元素能谱(EDS)、 X射线光电子能谱(XPS)、 傅里叶变换红外(FTIR)光谱和光致发光(PL)光谱等手段对该材料进行了表征, 并研究了Ce³⁺离子掺杂浓度、 反应温度和时间对晶体相变和发光性能的影响. 结果表明, 在波长260 nm的光激发下, Ce³⁺离子在500 nm处有1个绿光发射带而Mn²⁺离子在590 nm处有1个黄光发射带. 调变JIS-10∶xCe³⁺材料中Ce³⁺离子的掺杂浓度发现, 当x=0.06^{时, 即Ce3+离子的掺杂浓度较低时, 样品的发射颜色为黄绿色, 其CIE坐标为(0.38, 0.48); 当Ce3+离子的掺杂浓度增加时, 绿色发光带的增长快于黄色发光带的增长, 从而调整发射颜色; 在x=1.33时观察到最强的发射, 浓度过高发生浓度猝灭.}     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

Die Akzeptoreigenschaften von AsCl3, AsBr3, asJ3, SbCl3, SbBr3 und SbJ3

Zusammenfassung Es wurden die Enthalpien der Reaktionen von AsCl₃, AsBr₃, AsJ₃, SbCl₃, SbBr₃ und SbJ₃ mit Tributylphosphat, N,N-Dimethylacetamid und Hexamethylphosphorsäuretriamid bestimmt. Das Verhalten der Addukte bei Gegenwart eines Überschusses der Donoren wird beschrieben.

---

Acceptor properties of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃, and SbI₃

The enthalpies of the reactions of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃ and SbI₃ with tributylphosphate, N,N-dimethylacetamide and hexamethylphosphoric acid triamide were measured. The behavior of the adducts in the presence of excess donor molecules is described.

---

---

Mit 5 Abbildungen     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.